How to: Convert your Scepter Can/WaterPort into a Faucet
Рет қаралды 9,480
Күн бұрынRechargeable water spigot for water jugs. Various 3D printed adaptors for the water dispenser to attach to Scepter jerry can or WaterPort
**You may want to check with your FB community - put it out there and see if anyone has a 3D printer that may be willing to print it for you.
A quick google search and it looks like some Office Depot and UPS Stores will do 3D printing.
Scepter Can adaptor - 1 piece: www.thingiverse.com/thing:519...
Scepter Can adaptor - 2 piece: www.thingiverse.com/thing:531...
WaterPort adaptor: www.thingiverse.com/thing:531...
Rechargeable water dispenser: amzn.to/3I86ZQH
Scepter 20L water can: amzn.to/3CALMO4
WaterPort: amzn.to/3MLiwIT
Merch store: Print on Demand - www.rbsportsok.com/showrooms.htm
All our favorite gear is listed on our Amazon Storefront categorized for your convenience.
Matt DeWitt Amazon Page: amazon.com/shop/mattdewitt
Jackery: www.jackery.com?aff=543
Hypervent: mattressinsider.refr.cc/mattde...
Mpowered: shareasale.com/r.cfm?b=170858...
Renogy: shareasale.com/r.cfm?b=152991...
***$30 off your Moon Shade Awning**
Moon Shade Awning Discount Code: MWDAdventures
Website: moonfab.com/?sca_ref=1710074....
Get Out Gear - insulated blanket
shopgogear.com
Discount Code for 10% off and free shipping: MWDADVENTURES10
Hipcamp - $10 off your 1st camping experience when you sign up using this link: hipcamp.com/i/mattd008a21
Instagram: Mattdewitt1
Facebook: MWD Adventures
4th Annual Hiker Trailer Campout (HTC-E4): bit.ly/3pzCOw6
*We are a participant in the Amazon Services LLC Associates Program, MoonFam, Jackery, Renogy, Mpowerd, and Mattress Insider affiliate advertising programs designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites. It’s a great way to support our channel allowing us to keep bringing you helpful content. We appreciate your support.
@MWDAdventures 2 жыл бұрын
You may want to check with your FB community - put it out there and see if anyone has a 3D printer that may be willing to print it for you. A quick google search and it looks like some Office Depot and UPS Stores will do 3D printing.
@TheRealLifeoutdoors 5 ай бұрын
great video, adapters printing already, this is just what i was looking for
@triciaharrod7582 2 жыл бұрын
Nice ... like to get into 3D printing. Too many other bills and obligations. Great video!
@caver6292 2 жыл бұрын
Excellent mod, I got the pump and a 3D printed adapter screw on lid fro the scepter jerry can. It's perfect!
@heatherhikes6880 2 жыл бұрын
Did you find it online? I don't have a 3D printer so hoping to pay someone.
@MWDAdventures 2 жыл бұрын
Our son printed it for us with his 3D printer. You may want to ask on FB and see if any of your friends have a 3D printer - they are becoming more common.
@caver6292 2 жыл бұрын
@@heatherhikes6880 A friend send it to me a while back, I made a comment on the one he had on his scepter water cans....
@jonellesandel1066 2 жыл бұрын
We just did this mod as well. We used half inch poly pipe (irrigation hose) fed into Jerry can and then three quarter slid over that to fit around pump. We may just use a hose clamp around the half inch where it connects to pump for less pieces. Of course your 3-d print is way more elegant! Hoses don’t touch the water at all.
@philip8788 2 жыл бұрын
Do you have a video on your version? Or photos? I would like to try the modification you did. Thanks
@jonellesandel1066 2 жыл бұрын
@@philip8788 KZfaq doesn’t seem to let me reply with a pic or video.
@triciaharrod7582 2 жыл бұрын
Is there an old school hardware store approach to this? Soon, very soon ... will find out! Scepter jugs, is there a secure bolt on lockable carrier/holder for the Hiker?
@CraigG21 10 ай бұрын
Lone Rock Concepts sells a kit with the pump, hose, and adaptor for the Sceptre, Rotopax, and Reliance containers. More expensive for the convenience, but that’s capitalism. Works well for us.
@no2ticket 2 жыл бұрын
Any chance you know if the ac unit that the prep add on is for is still being made? Debating if it’s worth getting the ac prep if I can’t get the unit.
@MWDAdventures 2 жыл бұрын
I have not heard that it is available, but haven't been researching it either. We use the AC prep as an extra air vent when it is raining - our son made a 3D cover that we are selling to put on the AC prep to allow fresh air in/rain & bugs out. You can see it in this video: kzfaq.info/get/bejne/ft2ejdqTuL6ce3U.html
@colenormandin-parker7852 Жыл бұрын
Have you done any tests spilling tests with the adapters, just to see what would happen if it falls over. (I do a lot of offroading, and hoping to design a air-tight quick water solution). Thanks!
@MWDAdventures Жыл бұрын
We have not done any spill tests. My guess is that it would leak if it would end up on its side.
@jefferyshall Жыл бұрын
You actually don't even need those extra pieces. You can use your little rotary tool and rough up the inside of the Specter spout and rough up the exterior of the small center round piece of the pump and they will just press fit together without any of the 3D printed parts.
@MWDAdventures Жыл бұрын
Good to know
@heatherhikes6880 2 жыл бұрын
Have you found any locations that you can purchase the adapter for those that don't have a 3d printer
@mkramme 2 жыл бұрын
Yes, I have the same question in case anyone knows where we can have one printed out for us for a small fee.
@MWDAdventures 2 жыл бұрын
You may want to check with your FB community - put it out there and see if anyone has a 3D printer that may be willing to print it for you. A quick google search and it looks like some Office Depot and UPS Stores will do 3D printing.
@TheSgtk9 2 жыл бұрын
Drill a small hole on the Waterport adaptor
@philip8788 2 жыл бұрын
Great video. I don't have a 3D printer. How can I get the adapter 3D printed? How much would you charge to print and ship? Thanks.
@MWDAdventures 2 жыл бұрын
Send me a PM
@philip8788 2 жыл бұрын
@@MWDAdventures Howdy Matt. I have never sent a PM via KZfaq. I think this is a PM. I don't have a 3D printer and wanted to know, how much would you charge to print and ship? Thanks.
@MWDAdventures 2 жыл бұрын
@@philip8788 Since this is not our design, we don't feel comfortable printing them and sending them out to people. I would recommend checking with your FB community - put it out there and see if anyone has a 3D printer that may be willing to print it for you. Also, after a quick google search, it looks like some Office Depot and UPS Stores will do 3D printing.
@ChasingTheAdventureOutdoors 6 ай бұрын
I just had a local printer print these for me. He said I should coat them in epoxy resin to seal them. Since water is not actually coming in contact with them, is this even necessary?
@MWDAdventures 6 ай бұрын
We have not sealed ours. We did have an issue with the pump being left out in the rain on a trip this summer. The rain shorted out the pump and we had to replace it. Someone gave us the idea to put a drink koozie over the pump to keep it dry when not in use.
@michaelspurgeon3033 2 жыл бұрын
is ther anybody who make them (the adaptor) ? I do not have a 3d printet
@MWDAdventures 2 жыл бұрын
You may want to check with your FB community - put it out there and see if anyone has a 3D printer that may be willing to print it for you. A quick google search and it looks like some Office Depot and UPS Stores will do 3D printing.
@lizzard497 Жыл бұрын
Can I buy these adaptors?
@MWDAdventures Жыл бұрын
We don't sell these as they are not our design. You could check with your community to see if anyone has a 3D printer or you may find your local Office Depot/Max or Print shops may be able to print them for you. The file is in the description.
@rumin8470 2 ай бұрын
3/4 in id vinyl tube, 3/4 to 1 in barb to barb plastic adapter, 1 in id vinyl tubing ( i had braided lying around). Wet and fit together. Uglier and not as elegant as 3d printer. Cost about $5.
Comedy Club
Рет қаралды 7 МЛН
Gator_Overland
Рет қаралды 74 М.
Todd Parker
Рет қаралды 125 М.
Insider
Рет қаралды 261 М.