How To Correctly Apply a Car Windscreen/Glass Coating!

Рет қаралды 26,631

3 жыл бұрын

@CarCraftAutoDetailing 👍Please Like the Video 🔔 Subscribe 😀Enjoy
If you’d like to support this channel and future content please consider buying me a coffee at:
☕️ www.buymeacoffee.com/CCAD
Visit the CCAD Amazon Storefront for my top detailing products:
www.amazon.com/shop/carcrafta...
Products used in video: (items may be updated to what I currently use/recommend)
🇺🇸U.S.A. 🇨🇦Canada 🇪🇺Europe Links:
Strip wash Detergent: amzn.to/3MtYItX
Clay Towel: amzn.to/3MvTs99
Clay Lubricant: ebay.us/ZNOAoT
Drying Towel: amzn.to/3Tkw5Sq
IPA Panel Wipe: amzn.to/3Vhi21H
Masking Tape: amzn.to/3STKaGv
Polish: bit.ly/3e19RWm
Microfibre Hand Applicator: amzn.to/3Esh1xA
Microfibre Machine Pad: amzn.to/3EI2cHD
Shine Mate 5” Cordless Polisher: amzn.to/3My6XW3
Shine Mate 3” Cordless Polisher: amzn.to/3Tr2vdI
Microfibre Coating Gloves: amzn.to/3S6in4k
Glass Coating: amzn.to/3VtISn
Towels For Coating Removal: amzn.to/3EvyO7c
Inspection light: amzn.to/3rHWoW
🇦🇺 Australia Links:
Strip wash Detergent: www.waxit.com.au/products/nv-...
Clay Lube: www.waxit.com.au/products/car...
Clay Towel: www.waxit.com.au/products/eco...
Drying Towel: www.waxit.com.au/products/sup...
IPA Panel Wipe: www.waxit.com.au/products/car...
Masking Tape: www.waxit.com.au/products/car...
Polish: www.waxit.com.au/products/nv-...
Microfibre Hand Applicator: www.waxit.com.au/products/tid...
Microfibre Machine Pad: www.waxit.com.au/products/lc-...
Shine Mate 5” Cordless Polisher: www.waxit.com.au/products/shi...
Shine Mate 3” Cordless Polisher: www.waxit.com.au/products/shi...
Microfibre Coating Gloves: www.waxit.com.au/products/car...
Glass Coating: www.waxit.com.au/products/nv-...
Towels For Coating Removal: www.waxit.com.au/products/aqu...
Inspection light: www.waxit.com.au/products/tak...
ℹ️ Some listed products in the description box contain Amazon and other affiliate links. By clicking these links I’ll receive a small commission on purchases made without any additional cost to you. If you purchase through my affiliate links it greatly helps support this channel and future content so thank you in advance❣️
🎧Music track:
When the Sunrise by Sivan Talmor
#glasscoating #cardetailing #carcraftautodetailing

Пікірлер: 171

@tkx86 3 жыл бұрын

Thank god I can get my fix of my new OCD addiction. This is where I BELONG. It has helped me stay sober too. Best detailing channel on youtube that deserves way more subs than it has. Happy Easter Sandro.

@CarCraftAutoDetailing 3 жыл бұрын

Thank you so much and that’s really fantastic to hear, happy Easter my friend!

@hideinthebush2729 3 жыл бұрын

Hello, i'm a french guy getting more and more in detailing. I'd like to thank you for all your tutorials and videos. I will try to properly maintain my cars in the future and i will use your tutorials for that. Really thank you for transmitting such passion for detailing this is awesome

@twobibfr 3 жыл бұрын

Au delà de la qualité des vidéos, il a aussi le mérite d'articuler et d'utiliser un vocabulaire très accessible pour quelqu'un comme moi n'étant pas 100% à l'aise avec l'anglais ;)

@hideinthebush2729 3 жыл бұрын

@@twobibfr Yes c'est vraiment le top

@rooboy99 Жыл бұрын

Just about to use this. Wish me luck. Thanks for the video instructions Sandro

@groundcontrol6876 3 жыл бұрын

Good stuff Sandro! I'd like to add something: To those people on a tight budget, the original RainX works extremely well if you prep the glass as instructed here. You can use any cheap compound & elbow grease. As for the IPA step, you can use Stoner Invisible Glass. You can get it on Walmart for like 4 bucks for a 950ml bottle, and it works on paint too! Even on relatively soft and black finishes, I haven't had any issues with it and if it's good enough to leave glass clean and streak free, it's good enough to apply coatings. I'd also like to add that if your glass is way too etched with waterspots (as was the case with my 88' Honda CRX) you'll have to polish it with Carpro Ceriglass. I just used a standard, white polishing foam pad and it left the glass flawless and ready for coating. Used rainX and that was some time in 2019 and it's still beading up incredibly! Mind you, it IS a garage queen, but goes to show that cheap products can also be excellent and durable if prepped, installed and maintained correctly.

@23hublock1 3 жыл бұрын

Perfection. Satisfaction. Meditation.

@DuzBee 8 ай бұрын

Hi Mate, bing watching your videos. You have excellent narration and an easy listening voice - no hommo Mate 😂

@Matthew-yi3bm Жыл бұрын

The most awesome guy on KZfaq. Off the charts videos each and every time. Because of your channel, I have tried then loved the Nova Products. From Jet, Lustre, Evo and now Glass. I wish I found your channel years ago. Keep up the excellent/ superb work!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Best regards my friend and all the best to you.

@christopherkoulis5094 3 жыл бұрын

I just bought NV Glass Sandro. Your timing is too perfect thanks so much. You always inspire me as a new detailer

@CarCraftAutoDetailing 3 жыл бұрын

Great to hear and thanks mate!

@JonathanGurgul 3 жыл бұрын

Whaaaat. I literally was about to type out a comment on your last video to ask you to do a video on this and it popped up a few minutes later. That’s amazing! I ordered some yesterday.

@shealaking8557 3 жыл бұрын

Thanks Sandro, that was a helpful tutorial. Great to see a Mk. II Civic still in such lovely shape as well!

@PeteyMcSavage 3 жыл бұрын

As always great video and superb video/editing. Thanks sandro!!

@joevanseeters2873 3 жыл бұрын

Thanks for the great tutorial Sandro. Another useful detailing video. Your training and inspiration has upped my game tremendously as an enthusiast detailer. You are one of the best detailers on KZfaq hands down.

@brentonl1746 3 жыл бұрын

Really helpful to see this process as I'm hopefully heading of in a week for trip and wanted to do this before I went so thanks Sandro.

@WizardSoon 2 жыл бұрын

Nice classic car!!

@barbara4944 3 жыл бұрын

Very impressive results!

@darenwaters1469 Жыл бұрын

Awesome video as always. Thanks

@Ayerborne 3 жыл бұрын

Happy Easter Sandro. God Bless you and your family.

@bigguwapbrixks187 3 жыл бұрын

That’s a beautiful civic and great job Sandro I’m learning from you everyday

@fdb4233 3 жыл бұрын

Wow. The last ride shot. 🙌🏻

@Merkava76 3 жыл бұрын

Best part saves using windscreen wipers when it rains, when got a coated windscreen.

@CarCraftAutoDetailing 3 жыл бұрын

Absolutely!

@jimmyjazz4605 3 жыл бұрын

Grass is green and the sky is blue, too!

@alexisamtosta 3 жыл бұрын

Fantastic!! Thank you Sandro

@federicodanese 3 жыл бұрын

I love your videos, bravo!

@nicorallysport 3 жыл бұрын

Great job my friend 👌

@tommyholt3465 3 жыл бұрын

Excellent content! Thank you sir!

@KENDOMAINE 3 жыл бұрын

Frickkin read my mind,. Your a Wizard Sandro!

@maccas44 3 жыл бұрын

Thanks enjoyed that video and thanks for the great detail within the video

@1stfrompuertorico568 3 жыл бұрын

Thanks Mr. Sandro 👌👍 brilliant 💪👌👍

@amrautospa 3 жыл бұрын

Another great video. Your next video has to be your favorite glass cleaner that works both in the sun and in a shop.

@Codriver72 3 жыл бұрын

Thnak you! This will be very useful now when the spring is here for us in Europe. I will soon be attacking a few cars and this was very educating for me.

@DrBunnee 2 жыл бұрын

Thanks for this tutorial Sandro. I paired your recent video on waterspot removal with this one as my dad's new Giulietta had water spots on the glass. Just gave it a maintenance wash and couldn't be happier with the results of this coating.

@CarCraftAutoDetailing 2 жыл бұрын

Fantastic to hear that mate!

@PixelVogue 3 жыл бұрын

Hate glass cleaning, having my windscreen replaced next week so will give this a shot since it will be new!

@Mdetailing 3 жыл бұрын

Great video sir

@Andy-From-England 3 жыл бұрын

Cool video its surprisingly what you can do with glass

@TheCarDetailingChannel 3 жыл бұрын

Great tutorial Sandro! You know glass is super clean when you can't see the wiper blade travel path any more. Another way to remove bonded contaminates and super clean exterior glass is by using fine steel wool.

@Retset 3 жыл бұрын

Great video. I use AngelWax H2Go which is less permanent, albeit still does many months. Only issue is some wiper chatter below 30mph (I'm not using them if I'm any faster). I'll try treating the blades with it. IMHO, the main advantage of these coatings is safety in horrendous rain. I can pass trucks on the motorway and, when the spray from them hits, I don't lose visibility. Ditto in heavy rain where everybody else is leaning forward over the steering wheel, eyes on stalks and wipers flat out. I just drive, relaxed with the wipers off!

@swedishbob_7315 9 ай бұрын

Fantastic tutorial...

@AsianSENDS 3 жыл бұрын

Wowed uncle Sandro, this is the video I needed when I first tried installing NV glass but now I’ve been inspired to re-do my windshield. Hopefully you’ll make a headlight restoration video just like this ! Quality of these videos are so top notch and underrated. ☝️

@valkyrie_voodoo 2 жыл бұрын

he has a headlight restoration video by the way

@AsianSENDS 2 жыл бұрын

@@valkyrie_voodooI know. I’m hoping he makes a new updated version of the headlight restoration just like this

@chadrandolph9874 3 жыл бұрын

Hey Sandro! Thanks for the informative video. I purchased a bottle of NV Glass a couple months ago but haven’t gotten around to coating the glass yet. This video really comes in handy....That Nissan is looking awesome! If that is the same CarPro Lite coating on it CarPro really did a fantastic job with the Lite. Anyway, Happy Easter too you and the family!

@CarCraftAutoDetailing 3 жыл бұрын

Great to hear, thanks and Happy Easter Chad!

@sergeyrudnitskiy7579 3 жыл бұрын

Another great video-lesson how to do correct! I told you are the teacher, Sandro!))) I know one student at least))))) and way more in the comments already))) Thank you mate from Sweden. P.S: have read comments... - what have you told about google's English?))))))))

@Ian_P Жыл бұрын

Thank you for this. I have gained the knowledge and confidence to try this. I just did my vehicle using the techniques in this video. Turned out well. Thank you Sandro. To keep it fun for me I'm doing a battle / test on my car's windows.... Mirch Neo Lite vs NV Glass. Time will tell who has longevity. (My early guess is both will fare well). 🙂

@rooboy99 Жыл бұрын

Hey, how's the comparison against neo lite going?

@Ian_P Жыл бұрын

@@rooboy99 The Mirch Neo Lite is fantastic. The NV Glass is also fantastic. Both are still performing amazingly well. Preparation is key to long lasting results. I DA'd both front and rear screens with heavy cut compound. IPA wipe down, then applied. Both screens are incredible. For ease of use however, the Mirch Neo Lite is clearly easier to apply; although prep is key to the performance I feel. The NV Glass on the front is just going great. Super hydrophobic. Both awesome still at this stage

@scunnerdarkly4929 3 жыл бұрын

Anyone wanting to remove marks left from years of wiper action will do well to check out 3M 60150 glass polishing compound if standard compound isn’t cutting it.

@markradovic4493 3 жыл бұрын

Excellent instructional video Sandro. I used NV Glass on my car but only did a single coating all the way around. When time comes to reapply I will follow your steps. I was still amazed by its water repelling properties and maintain it using Glass Lite every couple of months. Thanks again Sandro.

@CarCraftAutoDetailing 3 жыл бұрын

Thanks and that’s great to hear!

@devilambrose 3 жыл бұрын

Judging by the VIC club permit.......seems like an interesting car you are working on XD

@kingnothing7620 3 жыл бұрын

I know not quite the same product but a review on NV Glass Lite would be good to see... I’ve started using it instead of Angelwax h2go and water repellency is great.

@nicholasbusetti7882 3 жыл бұрын

Excellent video on glass care, nice simple steps. With the Shine Mate polisher, what size do you prefer for polishing glass?

@CarCraftAutoDetailing 3 жыл бұрын

The 3” allows you to get a better result around the edges but the 5” or 6” will be faster on the larger areas of the glass.

@darkstar330 3 жыл бұрын

Thanks for the awesome video as always! Do you need to buff off the residue after applying the coating on my wipers or just leave it?

@CarCraftAutoDetailing 3 жыл бұрын

You’re welcome, and no you don’t need to further buff it off the wipers

@muazqamar 3 жыл бұрын

Amazing video! Finally I have something better than the ChrisFix video. I know it's a lot, but could you please also show how to clean the inside glass as well? Or is the ChrisFix method the best there is? Thanks for your hard work and love your channel!

@CarCraftAutoDetailing 3 жыл бұрын

kzfaq.info/get/bejne/fc5ld7ResKiqlJs.html

@muazqamar 3 жыл бұрын

@@CarCraftAutoDetailing You're a gem

@guerocarinoso7479 3 жыл бұрын

You surprised me with your videos and your intelligence, greetings from Mexicans, you have a video detailing the chrome bumpers of the vehicle and more. :)

@indetailcarcaresolutions3770 3 жыл бұрын

Nice video once more Sandro. How does this compare to CarPro Ceri Glass Polish Kit? Thanks, Lloyd

@CarCraftAutoDetailing 3 жыл бұрын

I personally don’t tend to use CeriGlass as it tends to leave micro scratches that are virtually impossible to remove. It can be good if the glass has really significant scratches, but otherwise I wouldn’t recommend it.

@adblf 3 жыл бұрын

Thanks as always Sandro... a lot of glass coatings I have used recommend waiting for up to 20 minutes to buff off the residue, some with wait time between layers. In your experience then do these wait times have any advantage in terms of longevity or performance, as your method here was to apply consecutive layers then immediately buff?

@CarCraftAutoDetailing 3 жыл бұрын

Most glass sealants/coatings I’ve used generally ask you to wait unlit the products hazes over before levelling, which tends to happen quite rapidly with most of these coatings, and laying times should also be quite quick as most of these coatings flash and cure much faster than standard paint coatings, but as mentioned in the video others will have more specific time frames and instructions which is probably a good idea to follow.

@sabrinasanders4741 3 жыл бұрын

As always, super easy to follow and extremely helpful! I'm concerned in that, my car has that auto up feature when opening and closing the doors and te windows drop or go up about a 1/2" (to seal better against the rubber, since it isn't full framed windows). Will this damage the ceramic? Also.. what a gorgeous old Honda Cvcc!

@CarCraftAutoDetailing 3 жыл бұрын

I have the same windows on my car, it’s not ideal but it still seemed fine after I coated them.

@sabrinasanders4741 3 жыл бұрын

@@CarCraftAutoDetailing is anything ideal when it comes to car maintainence? 😂. But I'm glad it won't be too drastic of a difference. As always, Thank you!

@andym9168 3 жыл бұрын

Excellent video! Glass coating definitely has a learning curve. Is CQ lite still on the Honda?thnx. again for all the effort

@CarCraftAutoDetailing 3 жыл бұрын

Thanks, and yes it’s still on, but the car has also has other products tested on it over CQLite since.

@stenhouse8569 3 жыл бұрын

What proper glass polish would you recommend buying I've heard good things about carpros ceriglass any better products out there? Thank you for another great video

@CarCraftAutoDetailing 3 жыл бұрын

I’d only use CeriGlass if the glass has bad scratches as it tends to leaves smaller micro scratches on the glass that are virtually impossible to remove, other wise really any car paint polish or compound is fine - I personally like and Finesse as it’s easy to work with.

@JordanWells 3 жыл бұрын

Great video as always Sandro! Question on Immolube: I’ve used it previously for claying @ CarPro’s recommended 1:5 dilution ratio, but it was extremely foamy which was a bit annoying. Do you find the 1:15 ratio you used in this video is still effective for lubrication while claying paint?

@CarCraftAutoDetailing 3 жыл бұрын

Thanks, and yes 1:15 seems to be the sweet spot for me for all claying purposes and even wet sanding lubrication at times.

@JordanWells 3 жыл бұрын

@@CarCraftAutoDetailing Perfect, thanks! I typically use Purify but I will be giving this a go again as I have plenty left over.

@aaronolsen8787 2 жыл бұрын

Awesome video Sandro! You're an amazing asset to the car detailing world. What's your opinion of NV Pro on glass vs Nova Glass? Thinking about getting Pro applied and that was an option due to using one bottle with one coat on the entire car including glass. Not sure if it's better or worse than an actual glass coating. Any thoughts would be appreciated!

@CarCraftAutoDetailing 2 жыл бұрын

Nova Pro works great on glass I’ve had it own my own car for 4yrs+. However, depending on the specific windscreen and wipers it can like many other paint coatings cause wiper chatter and it’s hard to predict whether it will or not until you try it. On the other glass without wipers it shouldn’t be an issue and should work great lasting longer than Nova Glass in general.

@aaronolsen8787 2 жыл бұрын

@@CarCraftAutoDetailing Thanks for info! You just did a single layer on your car and glass correct?

@CarCraftAutoDetailing 2 жыл бұрын

Yes

@purplehazeffc 3 жыл бұрын

Awesome timing. I've got a bottle of NV Evo Glass & now I know exactly how to apply it. Just waiting for the warm humid weather we have been having lately here in Perth to go away. But my question is. What's best to clean the glass in-between car washes after its been coated?? Can't use an IPA, as it would start to strip the coating.. I've been using Scholls Ice Gel glass cleaner. After the coating, can I still use it??

@CarCraftAutoDetailing 3 жыл бұрын

Great to hear! Nv realised Glass Lite a few months back which is both a light cleaner and topper for Nova Glass, but in the absence of that just your car wash soap should do it and even just a very light IPA or glass cleaner dilution 1:10 or so isopropyl alcohol to distilled water.

@purplehazeffc 3 жыл бұрын

@@CarCraftAutoDetailing Cheers Sandro. I’ll pick some NV Glass Light when I order next. All ready using NV Snow for car soap 👍👍

@FlipTheBird978 3 жыл бұрын

upload a matte paint detailing video

@zamzoom1 Жыл бұрын

Hi Sandro Great video. Followed the process and it works great. The only issue I have is when it rains lightly and the wipers (which were also given a coating) work on a slower speed the grippy glass makes the blades judder. No issue if it is bucketing down and wipers are moving at their fastest due to less friction because of the excess rain water. Any suggestions how to get around this juddering?

@CarCraftAutoDetailing Жыл бұрын

Thanks, and unfortunately some wipers and/or windshield can be more prone to wiper chatter than others once coated. It can after some use go away at times, and sometimes topping the coating with a slicker quick detailer or spray sealant can also help.

@vinz3160 3 жыл бұрын

Hey man, nothing to do with this video, but with your Channel in general: I just want to draw your attention to the "shorts" function of KZfaq. Uploading parts from older detailing Videos or teasers of upcoming ones, they are a great way to reach more people with your amazing content. I don't want to tell you what you have to do with your Channel in any way and I know it seems kind of random, but I just wanted to let you know about that. Cheers and keep it going!

@CarCraftAutoDetailing 3 жыл бұрын

Thanks I’ll definitely look into it!

@nicholasbusetti7882 3 жыл бұрын

I noticed the Lake Country HDO Microfibre Cutting Pads are half an inch more than the Shine Mate backing plates. For example would a 3.5" pad suit a 3" Shine Mate backing plate?

@CarCraftAutoDetailing 3 жыл бұрын

That’s normal, most pads are always larger than the backing plate for good reason (it’s safer) it’s just that many brands don’t give you actual size just the size of the backing plate it’s used for.

@Amor1990 10 ай бұрын

Did you apply the remaining residue on your wipers at the end?

@a111z 2 жыл бұрын

It seems like you should use the ipa/prep solution after the polishing step, not before.

@7071t6 3 жыл бұрын

Also Sandro there is product soporific glass polish, which has dioxides and resin to polish damaged or fine swirls in glass, but most people who run glass replacement places do not do it anymore, as the cost and time intensive, just replacement of the windscreen is cheaper?

@CarCraftAutoDetailing 3 жыл бұрын

Yes trying to remove scratches from glass is both extremely time consuming and limited in results making it not a great viable option.

@simasm.9757 3 жыл бұрын

meguiars hcw Full prep decon IPA, applied 2 dry coats on Saturday 1 week later today washing on roof and hood ok on sides-dead after the wash-dead other panels look a bit worse could it be shampoo? I used snow foam but that didn't look like did anything please help I lost 80% of my hope

@CarCraftAutoDetailing 3 жыл бұрын

It’s really hard for me to say what’s gone wrong with side panels, it could be a few different things, like your detergent/foam, some sort of contamination or existing paint protection on those panels prior to application, the product not being shaken up properly, some dirt or contamination on your cloths - I can only guess unfortunately

@p5tom 3 жыл бұрын

Have you tried Poor Boys new Ceramic coating? love to see that ...love your vids

@CarCraftAutoDetailing 3 жыл бұрын

No I haven’t, but I’d be interested in trying it.

@bigguwapbrixks187 3 жыл бұрын

I do have one question what is the best way to remove soap scum from windshield I tried everything man polish to alcohol it’s still there and disappears when I hit it with heat but as soon as I wipe it with a watered rag it comes back or in rain it drives me mad I can barely see, thanks

@povilasrikteris 2 жыл бұрын

I want to ask about NextZett Glass Sealant, I know that You have tested it in a video some time ago. I'm interested or application is the same as a Nv Nova Glass or a bit different? Because Nv Nova Glass doesn't give a haze affect if I'm correct. If I want to coat a few layers of NextZett Glass Sealant - should I coat the second one on haze/without removing the haze, or should I remove the haze first and then apply a second layer? I can't find any info, your video was one of a few about Nextzett Glass Sealant on KZfaq, purchased one a few weeks ago and want to try as fast, as I will have time to coat my windows. Thanks!

@CarCraftAutoDetailing 2 жыл бұрын

I haven’t used Nextzett enough to know everything about it’s application but since it doesn’t flash as quick as something like Nova Glass I would tend to give it more time, maybe a half hour between costs and stick to individual coats rather than consecutively layers it as I do with Nova. Based on how it behaved that would be the way I’d go.

@povilasrikteris 2 жыл бұрын

@@CarCraftAutoDetailing Thank You very much for help!

@owenjohnson5030 3 жыл бұрын

What are your thoughts on applying a glass or graphene coating on Subaru windshields with Eyesight?

@CarCraftAutoDetailing 3 жыл бұрын

It’s not going to effect or alter any cameras or sensors, they are extremely thin and completely transparent coatings.

@minhduong8446 3 жыл бұрын

Hi I just want to ask the durability of these glass coating realistically ? Also do you see a massive lasting effect of Nova Pro over consumer grade Nova Ceramic coating? thanks I got a new car ordered and this is super important ! Thanks

@CarCraftAutoDetailing 3 жыл бұрын

Durability can be up to 2yrs with Nova Glass, I would say 6mths in extreme conditions and 1yr on average. I would expect Pro to last at least 50% longer than Evo.

@minhduong8446 3 жыл бұрын

@@CarCraftAutoDetailing cheers mate.

@steverabbits 3 жыл бұрын

8:52 that is beautiful to watch, mesmerising

@JordanWells 3 жыл бұрын

Sandro! In this video, are you considering the 3 immediate applications (no leveling between) on the windshield 3 layers? Or are you doing that entire process 2-3 times on the windshield?

@CarCraftAutoDetailing 3 жыл бұрын

The immediate 3 layers is the entire 3 layer process

@JordanWells 3 жыл бұрын

@@CarCraftAutoDetailing Thank you Sandro! Just wanted to double check. Is it safe/recommended to apply Boost to Nova Glass shortly after application?

@CarCraftAutoDetailing 3 жыл бұрын

Nova Glass Lite has been developed to maintain and clean Nova Glass as well as be a more temporary standard glass sealant so that’s what I’d recommend, but I have used Boost over it and it seemed to work well.

@JordanWells 3 жыл бұрын

@@CarCraftAutoDetailing Awesome, I have a bottle of Glass Lite and had forgotten about that entirely. Would it hurt anything to use shortly after application? Not that it is necessary, but I know Glass Lite is rather slick

@CarCraftAutoDetailing 3 жыл бұрын

As long as you allow Nova Glass a good 6-8hrs to cure, you’re good to use Glass Lite anytime there after.

@likestarscreamxxx 2 жыл бұрын

i had some GTechniq applied to my windscreen but it chatters so much. Brand new car too. How do i fix/remove the coating?

@CarCraftAutoDetailing 2 жыл бұрын

A car paint cutting compound and microfibre or wool pad should remove it

@koioo2 3 жыл бұрын

mister sandro your classic honda civic ? can we or i use any polish for the front window or do i need a glass polish ?

@CarCraftAutoDetailing 3 жыл бұрын

Yes it’s mine, and you can any standard paint polish to prepare the glass.

@joa8593 2 жыл бұрын

It seems like many steps could just be replaced with fine steel wool or magic eraser and water. As you say, glass is much harder than car paint, you won't hurt it.

@totieso 3 жыл бұрын

I used cquartz in the windscreen and it lasted for 1.5 years and 15k km. Would flyby improve that?

@CarCraftAutoDetailing 3 жыл бұрын

CQUK will tend to last longer than Flyby, but it can sometimes cause wiper chatter which is the main reason you’d use Flyby- to avoid that.

@M31410 3 жыл бұрын

The Ethos Graphene Matrix on my side windows caused major chatter when rolling the windows up/down. I threw on a topper (Ethos Defy) and the chatter immediately disappeared. Thank goodness. I will be switching to dedicated wheel and glass coatings (NV Nova Wheel and Nova Glass) whenever the Ethos stops performing.

@Fenix-om8hi 3 жыл бұрын

Is there a way to get the Economax Clay Cloth if you live in the US? I tried ordering it through Waxit Car Care but they don't ship here =(

@CarCraftAutoDetailing 3 жыл бұрын

Unfortunately I’m just not sure mate.

@ilikechickensausages2075 3 жыл бұрын

I did all these steps, but used Soft99 glaco only to get wiper chatter and had to take it off with a glass polish.

@CarCraftAutoDetailing 3 жыл бұрын

Yes I’ve been there plenty of times with certain products causing chatter!

@kipdrordy6858 4 ай бұрын

Hi, ive installed the glass coating but when their are very tiny rain drops and I use my wiper there is a slight haze /whitish glare, is this normal? I deconned the car clay barred it then polished it and finished it with eraser

@CarCraftAutoDetailing 4 ай бұрын

The coating shouldn’t add any glare/haze if it’s all been prepped correctly and levelled down clear and clear during the application. Glare can obviously occur on windscreens in the dry and wet and with or without a coating applied, but if you feel the glare/haze is something new and due to the coating, that’s different. I can’t say for sure what the issue is but I can try to guess: Haze/ghosting which can cause glare is usually due the coating not bonding sufficiently, it can occur due to polish/wax/silicone residue interference during application. Another possibility is that the coating may have not been completely levelled down, leaving a fine haze. Sometimes wipers can also be the cause of this issue - especially if they are becoming worn out. Some cars - such as Tesla- tend to have very finicky glass/wiper setups that can be problematic to any glass polishing/coating process. Even after doing this for decades now, there’s still rare times when wired things happen - like your issue - that I can’t always explain, but I hope that helps.

@magno5157 3 ай бұрын

I have plenty of Nova Jet. Just wondering, is Nova Jet not suitable for glass?

@CarCraftAutoDetailing 3 ай бұрын

Yes you can use it on glass, it’s just that sometime certain windshield and wiper setups can cause wiper chatter, usually doesn’t happen but it can on certain cars.

@magno5157 3 ай бұрын

@@CarCraftAutoDetailing Thank you!

@brunofey5142 3 жыл бұрын

Sandro, can you please tell me what's the model/name of the handheld light you used when inspecting the glass at about 3/4 of the video?

@CarCraftAutoDetailing 3 жыл бұрын

www.waxit.com.au/collections/takenow/products/takenow-vega-light

@brunofey5142 Жыл бұрын

@@CarCraftAutoDetailing believe or not, just found this comment while cleaning old comments in my history. Thanks you so much!!!

@esantosnyc 3 ай бұрын

Can you do some Carpro Gforce v. NV glass testing?

@CarCraftAutoDetailing 3 ай бұрын

Yes I’m certainly open to visiting some newer glass coatings like Gforce in a comparison video - I have used it and so far seems very good!

@esantosnyc 3 ай бұрын

@@CarCraftAutoDetailing Soft99 also seems to be popular at the moment!

@tonymontana897 3 жыл бұрын

Hi, So when you say to use only car polishes to clean the glass, Ceriglass is no good ? You mentioned that glass polishes contain sealants. I thought Ceriglass was a cutting polish designed to correct any minor defects in glass AND clean it at the same time. Does Ceriglass contain such sealants too ?

@CarCraftAutoDetailing 3 жыл бұрын

No I don’t believe CeriGlass contains those additives but others such as Autoglym, Meguiars and many other glass polishes do seem to leave sealants behind which would cause bonding issues with glass coatings. In my experience CeriGlass is great if the glass has significant scratches- you can reduce them with A Lot of work, ideally using a rotary, but CeriGlass does leave behind micro scratches that are virtually impossible to remove in my experience. So unless the glass is quite bad to start with I wouldn’t use it.

@tonymontana897 3 жыл бұрын

@@CarCraftAutoDetailing I have Ceriglass which I intend to use to correct a wiper blade streak, that's about it. Just reading your comment. Did you mean Ceriglass "does" or "doesn't" leave behind micro scratches ? I might try it out on a sacrificial piece of auto glass and see what you mean. I haven't used it as yet which is why I though to ask. Thanks for the fast reply mate. You're a Champion !

@CarCraftAutoDetailing 3 жыл бұрын

Does 🙂

@nicholaswicks5764 3 жыл бұрын

Do you get your products from Waxit Car care because all the products you use are on there website

@CarCraftAutoDetailing 3 жыл бұрын

Yes most of my products are from there.

@ozyguy1 3 жыл бұрын

Do you ever get wiper "chatter" after coating the windscreen?

@CarCraftAutoDetailing 3 жыл бұрын

No, no chatter, but I’ve used it before on the same car and it’s always been smooth on the wipers.

@bearhades2642 3 жыл бұрын

Hello from 🇲🇾. I would like if you could make how to remove swirls and scrathes on glass? 😊 thanks.

@punkuk1979 Жыл бұрын

Hi How many coats on a glass roof?

@CarCraftAutoDetailing Жыл бұрын

I tend to use my paint coating for glass roofs as there’s no wipers or seals the glass rubs against which is the main reason you use dedicated glass coatings. But it’s really up to you and one coat can be absolutely fine but multiple coats can last potentially longer.

@user-df3dq7oq9q 3 жыл бұрын

hello how is the carpro reflect instead of finnesse?

@CarCraftAutoDetailing 3 жыл бұрын

Yes you can use Reflect instead.

@user-df3dq7oq9q 3 жыл бұрын

@@CarCraftAutoDetailing thanks a lot. have a nice day.

@7071t6 3 жыл бұрын

Hang on a sec, Sandro, you have said that compound polishes like all polishes do have oils in them, to help allow the spread of the products, so products like Maguire's glass polish or autonyms glass polish is the same thing right, a glass polish and not a paint polish?

@CarCraftAutoDetailing 3 жыл бұрын

Many “glass” polishes are actually sealants or AIO polishes

@mayursinghcharan9329 3 жыл бұрын

How many days durability sir glass coating and result please tell me

@CarCraftAutoDetailing 3 жыл бұрын

Should last anywhere from 6mths to 2yrs depending.

@mayursinghcharan9329 3 жыл бұрын

Thank you sir

@MrKryscendo 3 жыл бұрын

Okay, is nobody going to talk about those teal windshield wiper inserts? What are those!? Special silicone? Sandro- share with usssss.

@CarCraftAutoDetailing 3 жыл бұрын

Nothing special lol just some green silicone wiper blades from the auto store to match the green paint of the car.

@natek4139 3 жыл бұрын

I live in the US I can’t get any Nova products☹️ or at least it doesn’t give me the option to ship to the US

@CarCraftAutoDetailing 3 жыл бұрын

parkscarcare.net/collections/nv-car-care

@7071t6 3 жыл бұрын

Mate you forgot the gloves as your own skin has oils which is left on the microfiber towels, :)

@mc66739 3 жыл бұрын

Is it just me or did he coat the protectors that come on new wiper blades and not the rubber itself?

@CarCraftAutoDetailing 3 жыл бұрын

It’s just you lol ... they are green wiper blades

@laddtryck 3 жыл бұрын

that windscreen realy hates water now, holy shit

@slumygoat 3 жыл бұрын

My favorite glass coating. Rain X in spray bottle form. 5 min later and you have a clean water repellent windshield

@the_Real_R3x 3 жыл бұрын

Is there no sound? Lol

@mamo1984 9 ай бұрын

I have watched this video twice now and I have to say Im completely lost. I used ceriglass several times and it always left some scratches on the windshield. I don´t understand what I did wrong. I barely used any pressure when I did it the last time. And still I can see new scratches on my windows :(