How to Custom Paint: Water Drops!

Рет қаралды 24,756

Күн бұрын

In this video I show one of the simplest techniques you can learn; how to paint water drops. This is one of those techniques every painter learns and like others, there's a bunch of ways to do it.
I hope this helps! Share it out, give a thumbs up, and subscribe!
Products I used in this video:
Eastwood's Candeez Course Silver base
SATA Mini jet
The black and white I used was left over on the shelf.

Пікірлер: 39

@inthehomeshop 3 жыл бұрын

Thanks for checking out the video! If you enjoyed, hit that subscribe button and give it a like! EDIT: BTW....Sorry that my mic came in and out! had no clue until i was already 3/4 of the way through. Things happen!

@gladememmott3001 Жыл бұрын

Great channel and content!!! The young lowrider community will love these videos bro

@inthehomeshop Жыл бұрын

Thanks! I need to get back to doing them, I was having alot of fun doing these

@TurboFarviknugn 3 жыл бұрын

Have watched so many tutorials on this FINALLY someone explains gun angle, sure I can FINALLY get it to come out right! Thanks, and SUBSCRIBED!

@inthehomeshop 3 жыл бұрын

Thanks! Glad it helped!

@LivingInWarnerRobins 3 жыл бұрын

Nice tutorial! Love your videos bud, keep up the great work !

@mikealdag7309 5 ай бұрын

Pretty cool

@reneguzman720 2 жыл бұрын

Keep them videos/techniques coming brother👍👍

@inthehomeshop 2 жыл бұрын

I've been busy with work and haven't made new ones. I need to get back into it

@RonaldWalters-yj5uu 7 күн бұрын

Stupid sweet!!!!! 🤟❤️

@Surtigre 2 жыл бұрын

You earned a subscriber.

@-Reagan 11 ай бұрын

3:32 I wish we had a wider angle to see your movements and then closeups to see the effect of each movement. We don’t need the camera to get in the paint, but it would be nice to see your hands and separately show the closeup of the piece right after each stage of spraying. I really couldn’t tell what you were doing or see anything except by imagining what you were telling us. I am glad for that narration. You explain very well, you’re creative and very skillful. I feel like you have a lot to teach! I really like your technique from what I can tell and I did sub to hopefully see more! Thanks!

@paintucation 3 жыл бұрын

Cool effect! Thanks for showing this. How much clear does it take to bury the droplets? is there an edge on the hilights?

@inthehomeshop 3 жыл бұрын

2 normal coats and its flattened. The effect, when done correctly, is a minimal amount of paint on the panel, resulting in very little build! One of the many reasons it's so easy to pull off.

@85cj74cyl 2 жыл бұрын

Very good video and full of details. Thanks for doing this. I have a question, my Jeep is red and I am wanting to do this to the hood, do I still use white and black for the shadows?

@inthehomeshop 2 жыл бұрын

Easiest way as I tell everyone. Do a spray out and see what works best for you

@gobbledoc88 Жыл бұрын

Nice quick video, good tips. Would have been good if the camera was a bit further back to get a good idea of gun height etc.

@terrykrug5239 3 жыл бұрын

cool

@inthehomeshop 3 жыл бұрын

Thanks😎

@ironwood1621 3 жыл бұрын

Great video. About what air pressure are you using? I’d like to try this with an airbrush.

@inthehomeshop 3 жыл бұрын

Pressure will be different with different guns. I was around 10 psi. You want enough to blow out paint, but not disturb the water. Don't be afraid to adjust!

@ironwood1621 3 жыл бұрын

@@inthehomeshop thanks. It's almost like hydrodipping. Almost. Are you using Spies? Great product.

@inthehomeshop 3 жыл бұрын

@@ironwood1621 at my day job we use spies water. This was done with spare black and white solvent I had on the shelf

@paul1060 Жыл бұрын

nice video, where did you get those practice hoods ?

@inthehomeshop Жыл бұрын

One came from Dan-Am out of Minnesota, I can't remember where I got the other one.

@thistledewoutdoors3331 3 жыл бұрын

The only thing that sucks is that the clear typically likes to delaminate down the road when doing this.... It's just a matter of the base drying & losing that window.

@inthehomeshop 3 жыл бұрын

Use an intercoat over the base, or clear then sand prior to this. Shouldn't have issues with delamination. Most base coats have a 24 hour window

@Chopan8809 2 жыл бұрын

I'm wanting to do a PS4 controller. Any tips on the sides (where it curves)? Or is it just the way it turns out? Also I want the bubbles to look like they are floating upwards. Any advice or tips on that? Thanks

@non1503 Жыл бұрын

The air brush method might be easier since it is a small project. Might want to watch "How to paint water drops and airbrush lowrider style panel graphics" video from time warp custom.

@Yosoytuupapa 3 жыл бұрын

What about the over spray? Does that just add to the effect?

@inthehomeshop 3 жыл бұрын

In this example, the overspray is "hidden" by the flake. You're not going for coverage, just enough to create the effect. As I said in the video, this is just one example. The overspray becomes more prevalent when using other other colors for a ground coat as seen in other videos😎

@efrainguzman6143 Жыл бұрын

Where did you purchase the hood?

@andrewheneks9220 Жыл бұрын

Is this solvent or water born paint

@inthehomeshop Жыл бұрын

In that video is was solvent.

@andrewheneks9220 Жыл бұрын

@@inthehomeshop water base it doesn't work right?

@andrewheneks9220 Жыл бұрын

And the over spray shows. What if you just spray the water onto a wet solvent surface?

@inthehomeshop Жыл бұрын

@@andrewheneks9220 the overspray is what helps create the effect. I've never done it with waterborne. Like anything, there's 1000 ways to do something. It's paint! Enjoy it😎