How to CUT DOWN (shorten) your own golf clubs AT HOME

Рет қаралды 65,567

Күн бұрын

In this video I show how easy it is to cut down your own golf clubs at home if you feel that your clubs are too long for you. You only need the minimal amount of tools and no more than 5 minutes for each one. You might be surprised at how easy it is even for anyone that wouldn't know where to even start.
------------------
⛳️ What i used in this video;
🏌️‍♂️ White Spirit: amzn.to/3xIjlKj
🏌️‍♂️ Golf Grip Cutting Tool:
amzn.to/3d5I3fJ
🏌️ Double Sided Tape:
amzn.to/3zJXd4h
🏌️ Mini Shaft Cutter:
amzn.to/3xKlsgU
🏌️ Mini Hacksaw:
amzn.to/3d3WOQo
⛳️ What i use for all of my golf club repairs;
🏌️ Golf Grip Cutting Tool:
amzn.to/3d5I3fJ
🏌️ Golf Grip Remover Rod:
amzn.to/3zOZ8V6
🏌️ Double Sided Tape:
amzn.to/3zJXd4h
🏌️ Mini Hacksaw:
amzn.to/3d3WOQo
🏌️ 2 part epoxy glue:
amzn.to/2SkHnw1
🏌️ Mini Shaft Cutter:
amzn.to/3xKlsgU
🏌️ Double Sided Shaft extension for steel:
amzn.to/3zRWVrR
🏌️ Single Shaft extensions for graphite:
amzn.to/3xEiABS
🏌️ Full set of shaft extensions for graphite:
amzn.to/3d5ezPg
🏌️ White Spirit:
amzn.to/3xIjlKj
🏌️ Golf Gripping Solvent (Like white spirit but the proper stuff for regripping, a bit more expensive but it doesn't smell):
amzn.to/3zR9l3a
-------------------
📲 follow me on Instagram;
lukehanlongolf
------------------
📹 Related Videos;
🎯 How to re-grip your own golf clubs at home - • HOW to RE-GRIP a GOLF ...
🎯 How to lengthen your own golf clubs at home - • How to EXTEND your Gol...
🎯 How to remove your golf club grip at home - • How to REMOVE your own...
🎥 Related Playlist;
🚩 DIY Golf club repairs;
• DIY Club Repairs
-----------------
**Please note, i earn a tiny percentage of anything bought through the links in my description and that money will always be put back into making future content on my youtube video.
Thank you for your support on my channel 😎
Subscribe to play better golf 👀
#diygolfclubrepairs

Пікірлер: 17

@noroy2 4 ай бұрын

Thanks for the video, greetings from Mexico 🇲🇽

@leemzgoogle917 2 жыл бұрын

I was looking to cut down my putter by about an inch and I was curious about the tool that was used. Thanks for the info.

@LukeHanlonGolf 2 жыл бұрын

No worries, hope it went well haha 👍

@blaizekelley7249 6 ай бұрын

Got banned from Instagram had to come subscribe 😢but glad I did

@vancenguyen4951 Жыл бұрын

Awesome tips! Thanks

@PNWLiving1725 9 ай бұрын

Milwaukee has a m12 pipe cutter. Would you use that?

@nathandumelow6135 2 ай бұрын

Have you tried taking jumbomax grips off?

@LukeHanlonGolf 2 ай бұрын

Yes they’re an absolute pain but I was using a rod. I think if you used a syringe they’d be fairly straight forward

@pcascio 2 ай бұрын

Is removing 3 inches do-able?

@LukeHanlonGolf 2 ай бұрын

It’s definitely do able you just might have to thicken up the shaft with tape or the grip won’t stick

@timl4987 Жыл бұрын

Problem is often times shaft butt end will deform as you tighten the cutter. It makes it difficult to cut it in straight line.

@bassface1246 11 ай бұрын

You're using too much pressure. Barley tighten the blade and do several rotations till it gets easy then repeat.

@rexwolfe147 10 ай бұрын

You have no idea what you’re talking about

@anthonyholmes8328 Жыл бұрын

Hi I've bought this cutter to do one of my wedges no way will it cut the steel

@LukeHanlonGolf Жыл бұрын

Hi if you keep going at it it should eventually get through it does take a while but will eventually do it

@wadehowles5926 Жыл бұрын

You can't be afraid of bending the butt end of the shaft. I started with a tiny bit of pressure, turned a few times, and adjusted the screw. Lather, rinse, repeat. The end of the shaft starts looking a bit like an oval, but then you find just the right amount of pressure for the wheel to cut, go around 5-6 more times, and you're done.

@daniellawless92 3 ай бұрын

Those cutters are made for copper piping and thin steel tubing. It will 100% cut the shaft of a golf club no problem if you use it correctly.