I like how in most, if not all, of your videos, you don't approach the topics assuming that people are already familiar with previously posted videos. Newcomers can view the video and easily understand what's being discussed.

Nick: “No one is watching me” Yvan is always watching, he always knows when we use too much product

Well, after I mentioned I was a bit intimidated to polish and coat my daughter’s 24 year old BMW, y’all encouraged me to go for it. She and I did that this weekend using the methods y’all recommend and it went very, very well. Other than some rock chips and a few deeper scratches, it turned out fantastic. She is more that happy that her car looks so shiny and new. Thanks for the education and the prodding to do it.

Happy Fathers Day to all the dads out there! Enjoy your day!

Love these videos! Happy Father’s Day!

Thanks for the great work.

Thanks for the great video guys!

That is true! The diy group is a great community!

Happy Father's Day!!! Great Video Yvan and Nick!!!

Happy fathers day to both of you!

Ready and Happy Father's Day

Great video 👍🏼👍🏼💪🏼💪🏼 happy father day too

“Let’s walk down there and clean them all” hilarious reference yvan

Prep is the most important part!

Hi! Great video guys. Just wanted to ask how you maintain the legacy sponge? Pretty excited to adding this to my arsenal.

Intrigued by the treat, rinse, treat…I typically spray a panel before hitting it with the sponge. But then last night I did a pre-treat because road trip bugs and found that I was able to do larger areas without worrying about drying. Even seems to look better! 🤯

Nice info video thx u both ❤❤🎉🎉🎉😢

All right I have a bottle of quick beads but I'm wondering what i meed to be using while I am waiting a month maybe 2 months before I can get the 5 year ceramic coating what should I be putting on there quick beads or ceramic coating coating just to hold me over until I get the trust coating

Used Quick Beads yesterday!

Question about quick beads I know there's a few ways for applying but what is the best way to apply to get the best results be it gloss slickness and hydro? If you let it dwell how long before it starts drying up on you? And how long does it last best case scenario and worse case scenario? Do you need to reapply if washing weekly for best results? Thanks!

Great video! I have one question, when drying your car, If I dry my car with leafblower and then use a quick detailer after that, does that clean the evaporated minerals or is it better to dry it with a blanket in the first place? I do not like water dripping from side view mirror etc.

Perfect video for me! Got the same car

Bonne fete des pères ! From Montreal Question: when will you do a full video on PPF care and caution Keep up the great work

Is it a problem if you have hard water and am using it to rinse, does the water spot remover offer any protection for preventing the hard water from sticking? Indoors like you guys show, you have time to use a drying towel but I would be doing it in direct sunlight.

would it be a good idea to panel prep and ceramic coat my black tempered glass desk to make cleaning the dust off easier?

Can I use Incredible Suds instead of Rinseless for a clay towel wash, for spreading water spot towel and for cleaning a polishing pad?

Can you use quick beads on a ceramic coating? Or would it mask the properties of the coating?

Do you? Have any plans on creating a topper for your new ceramic coatings

My Nissan Frontier has a "Pro 4-x" decal from the factory on both sides of the vehicle. Can you run the decontamination towel over that decal without doing damage to it?

Hey guys, I was wondering if I should reclay my paint with the synthetic towel before ceramic coating? To provide some context I decon washed about a week ago and spent the next couple days polishing with the awesome diy system. After polishing it’s been about two days with my car just sitting there. Obviously it needs to be washed before but I’m wondering if you think I should Clay again to ensure proper adhesion of the coating, I also don’t want to undo any of the work I put into polishing so not sure if that would be too rough?

Do you have hard water in your shop? My tap water is close to 500ppm. If I apply RW after rinsing the iron remover, is that sufficient to prevent water spots?

For the contact wash, do you have to use the sponse or a microfiber would be ok too?

when will The legacy sponge be in stock? Have a large order on hold waiting for this bunch to be back in stock so I can complete my order.

I need to finish up a different brand of iron remover, can I just use that, rinse with the pressure washer and then use the clay towel with a clay lube of 1:128 dilution of rinseless wash?

Could you rinse the water spot remover off with rinseless in a ik sprayer?

If you don’t have access to running water how do you “rinse” the iron remover? Is another rinse less wash enough?

Please make something about Waterless wash 🤗🤗

I just bought a brand new car and had ppf applied to the full front. How does one prep ppf and piano black accents? I plan on using your Hydro Lite.

Great video. Question. At the very end when you are drying. You said “now if this were doing a maintenance wash we would be adding quick beads or ceramic gloss”. I do understand that you would not use a drying towel yet if your next step was to spray on quick beads because you then need to spray off the Quick Beads. Then dry the car with the towels. But if you were going to use Ceramic Gloss. How do you go about that step. Obviously you don’t use the large drying towel to dry the car because you’re going to use the Ceramic Gloss. How do I go about using that product while the surface is wet? If you have a video showing what to do please share it. Do you use smaller towels and spray ceramic gloss on the surface and buff each section and your drying at same time your spreading the CG? If so how do we prevent the car from drying to fast since it will take longer to wipe the entire car down since we have to spray and buff a product into the surface as we are drying at same time (in comparison to just grabbing the big towel and going at it to dry the car like in this video). We do not have the same environment like an indoor shop like you have here. We have to do ours outside in driveway before we can pull the car into the garage. In your shop moisture sits on the surface longer while outside the hot summer air dries the paint pretty quick. Now we do use a DI system so as to eliminate the worry of minerals drying on the surface just so you will know.

I park next to a machine shop and get grit on my vehicle daily. How often should I use the “clay” towel on my black ceramic coated vehicle? Do you have any recommendations for keeping my car clean?

Hi Yvan/Nick, where can I get that squeegee. The one that I have has a smaller tip and not that efficient..love the content as always. Thank you 🙏

Is it ok to add ceramic gloss to the rinseless wash bucket?

Do you have a time frame when your 15mm da will be available ?

So if I were to use all clean in a foam cannon for a really dirty vehicle, like a Jeep, what would be a good dilution?

when is the next restock for the drying blanket

Question about the iron remover and decontamination towel. My car is ceramic coated. Would I want to go over it every 6 months or so with the iron remover and clay towel being it is already ceramic coated or will that remove or degrade the coating?

You say to use iron remover every six months or so with a clay towel, is it safe to do this on a ceramic coated vehilce?

can you add all clean , de iron, water spot remover on a ceramic coated car?

do u use deionized water in the bucket? or is it just regular water?

What's your opinion of high PH soaps as a pre soak ? Dangerous or not ?

Will you guys be coming out with a alkaline and acidic wash soap?

In previous videos, you mentioned that if you use Ceramic Gloss or Quick Beads with a drying towel, you should put the towel in your rinseless bucket to clean it so they don't dry and ruin the towel. Do you put it in the dirty bucket from washing the car, or do you get a fresh bucket of rinseless to soak it in?

Hello Yvan & Nick, Great info video. Is there a new version of your Rinseless Wash 2.0 coming out, and if so will it still be able to foam?? Reference to the old bull young bull joke, well done. Cruz on

how much incredible suds do I put in a pressure washer foam cannon?

Do you just use spray bottles for rinse less if you don’t have a pump sprayer/auto sprayer like y’all do? Newbie question

Hey you guy's, I was just wondering what pressure washer/water system you have at your shop?

Hey Yvan. How do you decide whether to use iron remover with decon towel when doing a wash, clay, ceramic, instead of using a ceramic spray with the decon towel to make the whole process faster for professional detailing?

What does the DIY Detail Iron remover have that makes it safe to apply the towel into the panel like that.

24:00 The Bermuda Triangle thing seems to be mostly solved, though not conclusively. It turns out that it is a high traffic area, storms are common there, and it is far enough into most trips that people are hesitant to turn around or detour just due to superstition, so it makes sense for the rate of accidents there to be elevated. Can't link as comment will likely be flagged or removed as spam. Thanks for the video, these longer form situation-driven videos can be helpful as they allow us to test our knowledge by trying to predict the decisions and explanations, and they put together many of the tips from several past videos which can be easy to forget!

2 things: 1) what speed with the palm sander when using the app? 2) you guys should release stickers for your ceramic coatings I do a lot of cars with your ceramic coatings and I’d love (and many ppl too) to put them on the windshield so ppl know what ceramic coating is on the car 😊

I work for Hyundai and clean these all the time I would love to see your guys approach to cleaning the engine bay with electric cars

I don’t have water spot remover yet. Is there another DIY product that I can use as a sub in the meantime?

So the All Clean handles brake dust also?

Windshield: after having cleaned the windshield, once dry, it *seems* perfect. But it is not the case. If I rinse it again, once wet, I can see the traces of the wipers. What is the easier way to remove these traces?

Another question, if ceramic gloss clogs my drying towel, is there a way to get it out?

Has anyone used the decontamination towel with other iron removers (rust converters)? I have some other brands of iron remover I still have to go through first, but was concerned about potentially ruining the towel with other brands even though the rust conversion chemical is the same (Sonax, P&S).

Can the surface of a vehicle be too hot for the synthetic perforated decontamination towel? For example, a black car in the sun on a 90-degree Fahrenheit day with no shade? If so, I assume, work in sections continuously cooling the surface with more rinseless or just wait till evening.

It’d be nice if I could find the iron remover 16 ounce bottle anywhere I’ve been waiting for I don’t even know how many weeks 😢

Wow, where do you guys find all these clean new cars with clean paint to use in your videos.?

What’s that sprayer called that you are using to spray on the rinse less wash?

Ivan looks like a damn tour guide at a museum.

What am I gonna do with my incredible suds then?

The problem I’m having is I can’t control the buffer. I have MS

I previously mention deionized water is like steroids for Incredible Suds, I tried foaming DIY Rinseless with deionized water in my foam cannon, and the suds seriously rival traditional foam soaps.

Just wish I had a Place to Wash my F-150, It's like washing a HOUSE???? Still just can't figure/understand how a Sponge can work so well "Without Scratching" The Surface?? I have alway's use a High Quality Wash Mitt. Very Strange for sure. 🤷‍♂. Yvan / Nick, Can ya Use the Decon Towel on PPF, And Ceramic Coating without Damaging it or causing Issues???

Where you get the clear bucket at?

What did you think Waterless wash do some hairline scratches?

Lack of a rear wiper is a big complaint with this car. The refresh now has one.

I went to your site and everything is sold out, when are you going to get restocked???

Happy Birthday Nick! 🎂😎🤔Naples, Florida here! 🔥💦🔥💦

Which method do you prefer for a deep clean when not doing a polish or ceramic coating?...Incredible Suds, Decontamination, Quick Beads, Ceramic Detailer or the rinseless method you outline in this video?

Guys and gals from DIY always remember: you changed my life with your Rinsless wash, it was my first, and will be my last, it's your most important and significant product - never fail me in my faith in it - and I will always defend it with my life 😅 You bunch are the best! Going to buy your 3 year coating soon and apply it on my daily

Who makes the cansister you are carrying around? I find it funny people will buy a bunch of expensive equipment and product, but won't spend $2 for a small Walmart graduated measuring cup.

…….exactly! Lol

16:35 "You're gonna get feedback as you touch the car and it will let you know whether your paint needs contamination" -- when is DIY Paint Contaminator coming out?