HOW TO DIAGNOSE FAULTY VIDEO RAM CHIP ON ALMOST ANY NVIDEA / AMD GPU RTX, GTX, VEGA, R9, R7 & More

No video

HOW TO DIAGNOSE FAULTY VIDEO RAM CHIP ON ALMOST ANY NVIDEA / AMD GPU RTX, GTX, VEGA, R9, R7 & More

Рет қаралды 89,574

2 жыл бұрын

LER #170
How to detect faulty RAM chip RTX30xx, RTX20xx, GTX16xx/10xx/9xx/7xx/6xx/5xx AMD RX 400/500/R7/R9/RX Vega
Here we have a look at some software to diagnose and identify faulty VRAM chips on most graphics cards. I explain where to download and how to set up the software and basic use.
Download Links
Mem Test Software Files
drive.google.c...
Alternatively you can use these links on my google drive
Use these or the original ones I linked
Any problems let me know, I think I did everything correctly
1.rar drive.google.c...
2.rar drive.google.c...
I split 3.rar into four parts, each about 8Gb to make it easier to download and make it less likely for one file to hit the daily download limit. Save them all into the same folder then right click on Part1 and select UNRAR. There is no password required. This will recreate the original 32GB file.
3.rar part 1
drive.google.c...
3.rar part 2
drive.google.c...
3.rar part 3
drive.google.c...
3.rar part 4
drive.google.c...
Disk Genius
www.diskgenius...
WinRAR
www.rarlab.com/
I work in collaboration with:
The Electronics Channel (with Carlos and Detlef)
/ @theelectronicschannel
Gran Canaria Uncovered
/ @grancanariauncovered (with Detlef and Julie. Not electronics related)
Det Builds Stuff - / @detbuildsstuff8128 (Detlef)
Retro Upgrade - / @retroupgrade (Carlos)
For All Your PCB needs: free $5 discount coupon
www.pcbway.com...
Equipment used in my videos. These are affiliate links, you pay the normal price and I make a small commission.
TEST METERS
Aneng AN8009
s.click.aliexp...
amzn.to/469ZgOS
www.banggood.c...
KM601
s.click.aliexp...
www.banggood.c...
VC480C+
s.click.aliexp...
amzn.to/3Q3LEz7
amzn.to/46tmNdo
MESR-100 ESR METER
amzn.to/3tiy8hK
amzn.to/3RwvejK
s.click.aliexp...
XC6013L CAPACITOR METER
s.click.aliexp...
amzn.to/3t71Nul
amzn.to/3LDdcbO
TM-902C TEMPERATURE METER
s.click.aliexp...
amzn.to/3LFzERv
amzn.to/3PTwuvW
FNB58 USB ANALYZER
s.click.aliexp...
amzn.to/3tb1QW8
amzn.to/46oMn30
www.banggood.c...
PCI POST ANALYZER
s.click.aliexp...
amzn.to/46m9Gep
TL460S Plus PCI_E ANALYZER
s.click.aliexp...
amzn.to/3ZERvOs
MULTIMETER PROBE KIT KET05
s.click.aliexp...
OSCILLOSCOPES
FNIRSI 1014D
s.click.aliexp...
amzn.to/3RxMFk1
www.banggood.c...
FNIRSI DSO-TC3
s.click.aliexp...
amzn.to/3RBsgdS
www.banggood.c...
FNIRSI DPOX180H
s.click.aliexp...
amzn.to/468oooT
www.banggood.c...
BENCH PSU
NPS3010W
s.click.aliexp...
amzn.to/3rxsuIf
www.banggood.c...
SOLDERING
T12 Station with M8 9501 Handle
s.click.aliexp...
amzn.to/3FdG8Ul
SUGON T26D
s.click.aliexp...
QUICK 861DW
s.click.aliexp...
amzn.to/3PBOKZH
amzn.to/3RCSqNh
PROS'KIT SS-331H
s.click.aliexp...
THERMAL CAMERA
Infiray P2 Pro
s.click.aliexp...
amzn.to/457PgEb
www.banggood.c...
MICROSCOPES
Amscope Optical Microscope (copy)
s.click.aliexp...
uk.banggood.co...
amzn.to/4675Qp0
amzn.to/459uvrY
ANDONSTAR AD407
s.click.aliexp...
amzn.to/3PSQKxJ
amzn.to/48sxej4
EEPROM Programming
TL866 II+
s.click.aliexp...
amzn.to/3RTCRB9
amzn.to/3LDu3Lu
CH341A
s.click.aliexp...
amzn.to/48IZiir
If you would like to support this channel
You can send donations
www.paypal.com...
You can subscribe to Patreon
/ learnelectronicsrepair
You can click Join to become a channel member
Thank you
Richard

Пікірлер: 404

@LearnElectronicsRepair 2 жыл бұрын

Here are files now on my google drive. Use these or the original ones I linked Any problems let me know, I think I did everything correctly 1.rar drive.google.com/file/d/1eDVDXSAgppKSMuYIum7K7WBBDMao5ELn/view?usp=sharing 2.rar drive.google.com/file/d/1uEtz0SfKqtlLPtE-oICVnOMvl_TOSP0M/view?usp=sharing I split 3.rar into four parts, each about 8Gb to make it easier to download and make it less likely for one file to hit the daily download limit. Save them all into the same folder then right click on Part1 and select UNRAR. There is no password required. This will recreate the original 32GB file. 3.rar part 1 drive.google.com/file/d/1TenUVubIzep8auw1BQQG3dtArZcCniBt/view?usp=sharing 3.rar part 2 drive.google.com/file/d/1qTTYcxgMIAeF1f6znuUb_zt7Or1kRWOV/view?usp=sharing 3.rar part 3 drive.google.com/file/d/1zy6R1eNvy-6h9pXg6JRTC5vJeQZEysHf/view?usp=sharing 3.rar part 4 drive.google.com/file/d/1uOPKUKUEul-Zr010d3mSxjurnp3xZyRi/view?usp=sharing

@S_G- 2 жыл бұрын

Whats the password? - winrar asks for it to unpack

@calin1109 2 жыл бұрын

I have a problem. When i boot on non UEFI the menu shows up and if i try to choos an option ...it freezes. If i choose UEFI, it starts in RTX3000 series. Any thoughts? Thanx!

@LearnElectronicsRepair 2 жыл бұрын

@@S_G- kings_overkill

@steve6375 2 жыл бұрын

@@calin1109 For UEFI, switch on - press F8 or F12 or whatever key for your BIOS Boot Selection menu - choose EFI Partition 1 or EFI Partition 2. For UEFI AMD, you need instructions from my blog - see my comment below.

@rafak9177 2 жыл бұрын

@@calin1109 Have the same problem. Did you find a solution?

@LearnElectronicsRepair 2 жыл бұрын

To test AMD GPUs: Select Option 3 When the text scrolls up the screen, at the end it says 'Press ENTER for maintenance or press control_D to continue' You need to Press ENTER Then type ls (LS but lower case) and ENTER Now you see a list of AMD GPU models to test. To run the test from the list type ./ then the name of the models from the list - for example ./390 for R9-390

@neutronlent715 2 жыл бұрын

it's nvidia gpu not amd

@spack4803 2 жыл бұрын

When I select option 3 to test a RX 470, it display about 20 lines of logging data and then locks up and doesn't accept any keyboard input. I've disabled the internal graphics and selected PCI as the display source. Are there any other bios setting I might need to make.

@spack4803 2 жыл бұрын

Found the issue: Needed to disable CPU power management in the Bios.

@amorzalek4306 2 жыл бұрын

i tried and downloaded the whole file and tried to test an Amd card but my screen freezes at the begining and am not able to do the test, can you please help? Maybe it would be helpful if you did a video with Amd card so it would help us alot like your content :)

@enjoygames6118 2 жыл бұрын

@@spack4803 Same here… I have MB Mortar B460m .. XFX card rx 470 8 Gb… Any ideea ?

@vitor900000 2 жыл бұрын

Gosh this guy is a Blessing send from the heavens. Every single time I get one of his videos on my recommended list I get the answers for a question that I was never able to find on the internet.

@LearnElectronicsRepair 2 жыл бұрын

To be fair to the original creators of the this software, I basically translated it from Spanish to make it more accessible for none Spanish speakers and added a few points I worked out myself when I could not get it to work. Thanks anyway, I am sure this will help a lot of people but credit where credit is due - The original (as far as I know) publisher was Kings Overkill. As I mentioned I'm an English guy living in Spain for over 5 years now, so I understand a fair bit of the lingo but wow this guy speaks Spanish fast! kzfaq.infovideos

@vazza45 2 жыл бұрын

This is excellent. Only resource on YT that talks about this sort of thing and suggests content that actually works. Keep it up and I'll stay subscribed :)

@LearnElectronicsRepair 2 жыл бұрын

I'll do my best :D

@JazzEnso 10 ай бұрын

I'm recently downloading all the file you gave, but I have error 13 ing AMD Rx570 "Error 13: invalid or unsupported executable formar, please help

@GuilhermeFSV Жыл бұрын

I'm starting to study electronics, your videos help me a lot! Thanks a lot from Brazil!

@akinori1505 12 күн бұрын

conseguiu?

@andyjackson3891 2 жыл бұрын

Amazing video once again. Thank you for making these - very honest, informative and enjoyable. Keep 'em coming!

@St0RM33 Жыл бұрын

What is the password? All 3 files downloaded have password edit: found the password: kings_overkill

@EliuTomio Жыл бұрын

👍

@KingsOverKill 2 жыл бұрын

It is great that the information is shared, I have seen some of your videos on Graph analysis, excellent information, the program files, I do not request a password? Greetings.

@LearnElectronicsRepair 2 жыл бұрын

Hi, thanks for your approval - I also linked your YT channel here and will recommend it. I understand enough Spanish to make an English version. I also added a few pointers for those who like myself could not orignally get this to work (nothing wrong with the files but with BIOS settings) kzfaq.infovideos

@KingsOverKill 2 жыл бұрын

@@LearnElectronicsRepair Perfect ¡¡, it is excellent that the information is shared, if you need, I have the files uploaded in MEGA, in the discord of the community are all the utilities that I have uploaded regarding GPU analysis, but this is the most complete. excellent work.

@DaneNanahara 2 жыл бұрын

sir what is the password on the part 3 @kings_overkill

@lukegrossotron8015 16 күн бұрын

Where do I put the 32gb file? In the video you show 3 parts what I downloaded here only has a 32GB file??

@St0RM33 Жыл бұрын

Hello, i don't know if you will see this comment, but i do have 2 identical MSI 5700XT's that were mining for a long time; They will run furmark forever, but they will crash and reboot the system in any type of gaming load and/or 3dmark/unigine benchmark. I am guessing it's vram related, but how can i test if it's the power or gddr5 module?

@maro9725 2 жыл бұрын

Part 3.pmf is formatted as ext4 so the system can’t read it with boot system so amd gpus can’t fix

@steve6375 2 жыл бұрын

see rmprepusb.blogspot.com/2022/06/run-nvidia-graphics-memory-tests-from.html

@liqinmiah4414 Жыл бұрын

Same problem

@rafaelmateus9158 Жыл бұрын

same problem here

@aidansweeney9909 Жыл бұрын

Same problem. Does anyone know how to fix?

@oussamaassal5588 Жыл бұрын

any solution ?

@conceptofeverything8793 Жыл бұрын

FYI guys. BIOS sometimes has issues recognizing external HDDs and the live os files often get messed up during installation as well. SSDs or USBs seem to have less issues

@Kepsizadam 2 жыл бұрын

Çok teşekkür ederim ilaç gibi geldi.. R7 370 Strix modelini artık vram test yapabileceğim galiba. :)

@boy230710 Жыл бұрын

hello i get error 13 invalid executable format error on amd number 3 option any help is appreciated thanks.

@Dutch_off_grid_homesteading Жыл бұрын

Heya, it is really nice to have software to test the mem chips

@abangdulex5040 Ай бұрын

Hi and thanks for upload I was finally succes to run it after see another video about bios setting in legacy , but I could not find here Nvidia GTX 1070 is not recognized in this tool? I don't see this model on the list in the 367.56.4 ?

@xpinformaticafloripa Жыл бұрын

Hi bro! do you have the files to test AMD 6000 series?

@stoptheirlies Ай бұрын

Thanks mate that is very useful, can replacement memory chips be purchased already balled?

@singleunit 2 жыл бұрын

hey buddy, I am really enjoying your video's and style, thank you for all the effort!!!

@oynamalan Жыл бұрын

Can you please explain the same procedure for the nvidia notebook gpu's?

@jodialiando5483 Жыл бұрын

I got error BSOD nvdlmmkm.sys ( fault area non paged), what should i do? I have try to reinstall Nvidia driver, reinstall windows. Still not fix. Now, i cant use Nvidia :(

@YouTubeMajstor 2 жыл бұрын

@Learn Electronics Repair Hi, it's a great channel. Question about the gpu test, the card is gtx560ti but the test doesn't test it, it just scrolls the command lines and comes to / home. With the command Is see that there is no folder for this card. it can be inserted later and where to find it. Greetings from Serbia!

@opacky1411 2 жыл бұрын

This is gold! Well done m8! Are 1. rar and 2. rar same file by mistake?

@LearnElectronicsRepair 2 жыл бұрын

Fixed. Thanks

@fdg-z8k 15 күн бұрын

Password is kings_overkill for .RAR files 1 and 2 , thanks to add in commentary section for next viewers =) @Learn Electronics Repair

@iBoardRepair Жыл бұрын

Thanks for the video, I've linked to it many times!

@JBpremiumsignals 2 жыл бұрын

Hi, i canr seem to make mats mods to work, errors appears, is there a required motherboard specs to run that, and should my hardrive plugged in when using mats?

@lucataszarek8782 2 жыл бұрын

Hello, thank you for sharing this great material, I have a question regarding saving the report after the test, is it done automatically or do I have to enter a command? I am asking because I have an rx 580 ARMOR 8GB OC card, there are terrible artifacts on the screen, so I enter the commands in the dark, but after the test I do not find a report in the home folder, can you help me in advance, thank you and best regards Ps, I'm sorry for my English

@LearnElectronicsRepair 2 жыл бұрын

Watch this video for more info about that kzfaq.info/get/bejne/qax8pceAs7CVlmg.html Also join the LER discord server and you will find more help there LER pm Discord kzfaq.info/get/bejne/n9SmjJip0LG-h2Q.html Here is the invite link. Everyone welcome: discord.gg/vam6YC8vwU

@fountechelectronicsandsolu8898 2 жыл бұрын

Great video and you are a genius person...Thank you for your teaching......

@Jason-zh7wo 2 жыл бұрын

Great video thanks 👍👍just what im looking for

@LearnElectronicsRepair 2 жыл бұрын

Glad I could help

@GurjVirdee 2 жыл бұрын

Need help. I'm stuck loading the AMD test. It start loading then it stops and says "NET : registered protocol family 1". How can I fix this ? I've tried maxcpus=1 and acpi=off, but still same issue. Thanks

@Chr1stColomb 6 ай бұрын

Have you found what was the issue since ?

@GurjVirdee 6 ай бұрын

@@Chr1stColomb No, I gave up ages ago. Prefer NVidia chips

@Chr1stColomb 6 ай бұрын

How did you set maxcpus=1 and acpi=off ?

@GurjVirdee 6 ай бұрын

@@Chr1stColomb I honestly don't remember now, been ages.

@fergielan4031 Жыл бұрын

I have one problem when i push the option 3 for test rx4xx and rx5xx,the problem is : acpi : executed 1 block of module-level executable aml code Acpi: ssdt 00000000eda9398 0079B (v02 PmRef Cpu0Ist 00003000 INTL 20160422? Any can help me pleaseee???? :(

@usamawaqas5596 Жыл бұрын

m having same issue, did you able to sort this out?

@usamawaqas5596 Жыл бұрын

Plese help.

@alexkelo1403 11 ай бұрын

Me too. Any solution?

@ibrahimhakkicandan 6 ай бұрын

you need ddr3 mobo

@TO_SHI_G4 5 ай бұрын

Cpu0Ist→Intel SpeedStep ApCst→C-States

@zikaphantom 2 жыл бұрын

Everything seems to work accept the AMD option. If I select AMD I keep receiving "Error 13: invalid or unsupported executable format" I press any key to continue, and it takes me back to the main menu screen.

@steve6375 2 жыл бұрын

rmprepusb.blogspot.com/2022/06/run-nvidia-graphics-memory-tests-from.html

@jagerserwis 2 жыл бұрын

The problem lies in the Disk Genius, use older version because the new one messes up the files...

@niusta 2 жыл бұрын

@@jagerserwis i am getting the same issue. Which version should I install?

@jagerserwis 2 жыл бұрын

@@niusta U need to find a 5.4.2 version like on video. The newest version is 5.4.5 and it's faulty

@GregM 2 жыл бұрын

I can see what you mean about the Spanish speaker that featured this software on his KZfaq channel. A fast talker indeed ;)

@steve6375 2 жыл бұрын

he is so excited he cant even hold the camera still! Guess he hasn't got a tripod!

@kosmo556 Жыл бұрын

Hello sir, awesome work thank you very much :) , i have a question, cant boot rx option it gives me error 13, any ideas?

@rafaelmateus9158 Жыл бұрын

Me too

@user-gu6qe3tf6u Жыл бұрын

Hi friend, thank you for everything you do for us.

@Mr.ZEZExSAURUS Жыл бұрын

Hi! thank you for sharing. do you know if I can use a microSD card or an USB stick?

@gr3yg00se89 Жыл бұрын

I am trying to test memory issues on a Radeon R9 290X. I select option 3 but I get the following error: Error 13: Invalid or unsupported executable format. Am I doing something wrong?

@platinumsteel6458 Жыл бұрын

I have same issue. Tried everything in the book and same issue.I am looking tru the comments for a solution but seems it's only me and you in the world has this issue my friend.

@platinumsteel6458 Жыл бұрын

Hi i looked lower down the comments and a guy suggested getting version 5.4.2 as newer versions might be messing up the files. So i am going to download it and try.I'll get back to u if am successful.

@gr3yg00se89 Жыл бұрын

@@platinumsteel6458 that would be great, please let me know if that works. Thanks!

@andreipop2431 2 жыл бұрын

Thank you very much for all your videos, I learn a lot from you, I downloaded the program from Kings Overkill's channel earlier where I subscribe just to your channel, but it didn't open the program's home page for me, enter the test directly nvidia GPU and amd GPU hat errors. I'll try again now with the settings you described in the comments to see if I can succeed, once again thank you very much for all the electronics lessons

@LearnElectronicsRepair 2 жыл бұрын

I had the same problem as you - hopefully my suggestions will get it working for you too

@steve6375 2 жыл бұрын

@@LearnElectronicsRepair rmprepusb.blogspot.com/2022/06/run-nvidia-graphics-memory-tests-from.html

@abedyousofzai6705 2 жыл бұрын

Hi can we use this Software for Amd Vega 56 as well or ...? Thanks for your best effort.

@user-hi3ue4zo1e 10 ай бұрын

Hello,tell me,I put the complex on both vin and vin 10,the first line opens mats,the other two when opening error 22 or 17,I tried different versions of the genius disk,it didn't help

@Brokeandbritish 10 ай бұрын

Great video, I'm getting wierd bug where keyboard works in dos, I run the program and when completed the keyboard does not work (so can't check files) I'm guessing it's a Linux driver issue? installed on two hard drives now sata and USB but same issue.

@DimasKurniawan Ай бұрын

did u have fix this problem bro ?

@neutronlent715 2 жыл бұрын

ok it's work . thanks for your help. I really appreciate your work ;-)

@LearnElectronicsRepair 2 жыл бұрын

You're welcome!

@OrnitorrincoLoko 7 ай бұрын

I'm getting the following error when I try to use the third option the RX/AMD one. (Filesysten type is ext2fs, partition type 8x83 kernel /boot/vmlinuz-2.6.32-24-generic root-UUID-6425f52d-e164-4084-a961-888a1a Bafe88 ro single mem-512M Error 13: Invalid or unsupported executable format Press any key to continue....) Anyway to fix it?

@ufak_tefek_isler 5 ай бұрын

bu sorunu çözdünmü aynisi bende de var

@dunno4022 Ай бұрын

I get this also. Did you find any solution?

@kokodin5895 11 ай бұрын

i am having problems with this partition 3 buisness i was able to download it and partition the disk, i can even boot to amd part but every time my computer restart around the place it suposed to display that green list of devices to test i am runing it on an old intel motherboard and my graphic card to be tested sits in x1 pcie port and is recognized both by windows and linux, although don't work due to memory problem so how do i get to the test enviroment

@WashWillah Жыл бұрын

I would like to ask do you have any clue for how to test old AGP cards? Sadly, mats/mods and t-server is not working because they don't support agp cards... I have a friend who collecting retro video cards and he asked me to repair them. Thank you and greatings from Hungary!

@saeedbirjandi6894 Жыл бұрын

hello thanks for your video i have one question if my video card have memory defect and i dont have first image in monitor how can i fined defect memory?

@down2earth485 2 жыл бұрын

Question, when I boot the program it automatically runs test and then I have no keyboard function.. I'm a bit stuck :(

@deadgamer9808 2 жыл бұрын

have you found the solution?

@down2earth485 2 жыл бұрын

@@deadgamer9808 don't boot it in UEFI 🤝🤝

@deadgamer9808 2 жыл бұрын

@@down2earth485 one more question when it automatically did test did you gpu pass or failed in that test

@deadgamer9808 2 жыл бұрын

@@down2earth485 ok i found it in my case the problem was with sata connector you should plug your hdd to secondary sata connector

@down2earth485 2 жыл бұрын

@@deadgamer9808 failed

@lukegrossotron8015 16 күн бұрын

Do I put the file on the largest partition?

@hermanopmobieloftablet6859 7 ай бұрын

Hi Richard, thanks for this video. I tested my Nvidia 2080 card and it failed. I wish I could add a photo, but it comes down that VRAM B0, C0 and F1 generate 128 errors, E1 24 and F0 16 errors. Am I right that reballing these VRAM'ss could cure this symptom? I have an SMD workstation but first I am curious if i would do the right thing. Later I want to discuss kind of solder, temparatures, pre heating plate or not, etcetera. Anyone elso who is into this is also invited to answer.

@ronmarthnitro5041 2 жыл бұрын

i really love your videos.

@boetienel6908 2 жыл бұрын

Hi Richard I need help with Amd radeon vii I got a short circuit so I removed the cpu but still short circuit. Please any schematics or any thing to help.

@QuickishFM 2 жыл бұрын

Where's the short exactly? Vcore? It's probably a low side MOSFET short to ground or a smoothing capacitor (one of MANY on that rail!) shorted to ground. At least its not the GPU die itself if you've removed it. If it's shorted to 12v then probably a high side MOSFET short. The GPU die itself might be cooked in this case though, they won't survive 12 volts!

@jesusyrose2560 2 жыл бұрын

Thank you great videos.

@dakshsharmagameplay6031 Жыл бұрын

Dear Sir, i watched the complete video, and i need help, i have msi Rx 580 8gb card, when i trying to use that the temperature going 80 degree ok when i off my system, card not working showing display but driver not accepted error code 43 showing

@Sydney268 2 жыл бұрын

Ok so say we know chip a0 is faulty, how do we know which chip a0 is?

@davidut55 Жыл бұрын

I run ./r9270x1 then it runs some black and white dots test and it passes, but how do i run mats? I tried some commands but say no such file or folder with the name mods or mats can be found.

@Gamin-ningo240 Жыл бұрын

I have a laptop with amd Vega graphics and GTX 1650 and that screen where you select the GTX version is not coming

@supercomputing942 2 жыл бұрын

Can this tool work on AGP nvidia cards? Like the Geforce FX 5000 series?

@LearnElectronicsRepair 2 жыл бұрын

I have absolutely no idea. Try it and let us know

@LeoKadettTouringCar 2 жыл бұрын

im curious too, but i dont have mobo to use my cards , i will try with my hd 4870 and i come here to say how it goes, i have one card with ram problem and others good to compare.

@askad42 8 ай бұрын

I followed your tutorial but i can’t get the hdd/ssd (tried both) to boot properly into the tool menu, it just gets me to an infinite fileid 0x00006c error or my gpu won’t show with the commands of your other video where you repair a 980ti. I’m trying to test the Vrams in my 3080ti because every once in a while i detect strange missing portions of my screen (as in a black screen) or artifacts but they only appear within a fraction of second. I don’t seem to have any issue when heavy loads of gaming, this only happens when normal navigation or when using KZfaq. Has anyone got the same issue? What can i do to make the program work?

@yllar007 2 жыл бұрын

I don't know what I'm doing wrong but software 3 doesn't work. says "software missing". I did everything exactly as in your videos

@LearnElectronicsRepair 2 жыл бұрын

Are you having problems downloading it? It's a very large 32GB file so I split it into four downloads and put them on my Google drive - download all four parts install WinRAR (its a free download) right click on the first part of 3.rar extract the file and it should rebuild the entire 32Gb archive 3.rar part 1 drive.google.com/file/d/1TenU... 3.rar part 2 drive.google.com/file/d/1qTTY... 3.rar part 3 drive.google.com/file/d/1zy6R... 3.rar part 4 drive.google.com/file/d/1uOPK...

@steve6375 2 жыл бұрын

See my blog at rmprepusb.blogspot for fixes

@draculaxxtw 2 жыл бұрын

Many thanks for your sharing. One question. Which software are you using to make an multi-booting HDD??? I made a three primary partitions, but couldn't choose primary 2 or primary 3 to booting......

@LearnElectronicsRepair 2 жыл бұрын

@draculaxx Mr. That's not something I have tried to do. I do have PCs with multi booting - for example Retro gaming rigs with XP/Win98SE and another with Win10/WinXP but I use two SSD, one for each OS, then select whichever I want to boot from the BIOS boot menu

@steve6375 2 жыл бұрын

@@LearnElectronicsRepair rmprepusb.blogspot.com/2022/06/run-nvidia-graphics-memory-tests-from.html

@ahmetkocyigit2 Жыл бұрын

When i want to test my R9 390 , i press enter at the 3rd option as you say but i get a screen which i can't type any commands or even Ctrl alt delete, there are a lot of PCI etc written on that screen and the last thing written on the bottom is [ 1.4.....] NET: Registered protocol family 1 , can anyone tell me what I've been doing wrong ?

@ibrahimhakkicandan 6 ай бұрын

ddr3 sistem gerekiyor sistemin ddr4 ise o hatayı alman bariz

@ahmetkocyigit2 6 ай бұрын

@@ibrahimhakkicandan cevabınız için teşekkürler hocam

@JHAKK 2 жыл бұрын

password = kings_overkill Took a guess and was correct..Thank you

@LearnElectronicsRepair 2 жыл бұрын

I actually show the password in the video ot 6:10 - I type it in on-screen and also read it out loud - so I am a bit surprised anyone has to guess at the password? Assuming they watched the video of course

@JHAKK 2 жыл бұрын

@@LearnElectronicsRepair I literally skimmed past that part with you entering password. I am a moron. Thank you Richard.

@GM-15R 3 ай бұрын

winrar gives an error during unpacking (the file is corrupted) am I the only one? This is only the case with directory 3

@conpa18dany 9 ай бұрын

Has anyone tried to download the RAR files recently? I keep getting an error checksum right before file 3 is about to finish decompressing. I tried WinRar, then switched to 7zip thinking it was the program but I get the same error. I tried redownloading the file, disabling antivirus, did a chkdsk on my drive and it still doesnt work. Any help?

@bobinchacko5524 Жыл бұрын

Hi I have an evga rtx 2080ti ftw ultra it keeps crashing in all games and 3d mark except in valley benchmark ... it is completing benchmark with over 7000 points but none of the games working on it. this graphics card I purchaced from ebay...need help with this thanks....

@noelwilke8546 2 жыл бұрын

I have an 1050ti that has very heavy artifacts under load. Mats passed without failure. The vcore vrms are reading weird at the gates. Some 2 Mohm some 2 kohm. Does someone have any ideas for further diagnostics? I have bought 3 broken cards as a challenge. I already binned one because it was used as a donor and for the second one i am waiting for parts (was baked by the previous owner so im uncertain if its even possible to fix) The 1050ti is the third one. I kinda really wanna fix at least one of them.

@krunopandzic1247 11 ай бұрын

I know this is a bit late I have some questions regarding the bootable hdd. First of all great video in depth as always, I have folowed all the steps as in video and everythings works regarding Nvidia cards, however amd cards especiali polaris rx500 seriess it just post "error 13", and returns back to home directory. Have You or anyone else experience similar issues. PS: Been trying with pyton scripts and it doesn seams to work.

@ORRAMIXDJ 2 жыл бұрын

Thanks man for sharing the files! I have problem with the third one, the extraction fails at 99% "damaged files error". I downloaded it three times, same error for the overlkill single file and as for your 4 split part files. I used jdownloader. Any help or suggest?

@LearnElectronicsRepair 2 жыл бұрын

@T3RR0R Download the latest version of WinRAR and try that. I actually use an older version WinRAR 5.70 and that works. The files must be OK (even my split ones) as others have i working. If there was a problem with the download then you would expect to get an error at that point.

@ORRAMIXDJ 2 жыл бұрын

@@LearnElectronicsRepair Solved! The problem was Google chrome. No problems downloading the files with Edge browser.

@LearnElectronicsRepair 2 жыл бұрын

@@ORRAMIXDJ Well Spotted. I use Firefox and can confirm that works fine

@neddy1287 Жыл бұрын

I have a question that I was wondering that Can I use the rar 1 and rar 2 on the hard drive without using the rar 3 as I like to test older graphic cards from 1000 saries and below

@melecsekimre4807 Жыл бұрын

Hi! Does anyone know how could i test a hd6970? It has a Cayman xt core, which i couldnt find a tserver version for. The closest i found was Barts. Thanks in advance!

@aniketpatil2265 2 жыл бұрын

mats and mods doesnt work on the quadro series. Please share a method for quadro cards

@JBpremiumsignals 2 жыл бұрын

GOOD DAY SIR! I TRIED THIS BUT NO REPORT.TXT IS APPEARING WHEN ON ALMOST ALL 3 GPU'S I TESTED :( TWO IS GTX 560 , AND ONE RX550, ALL SAME NO ERROR.TXT , IDONT KNOW WHAT TO DO, DOES MY MOTHERBOARD PCIE SLOT DEFECTIVE?

@danieloctrinov7681 Жыл бұрын

excellent, thank you

@lopigard1 2 жыл бұрын

Hi, very informative. I have just one question. I found that on my R9 290 4GB the faulty VRAMs are A0 and B1. How do I know which VRAM coresponds to A0 and to B1? On Nvidia I know it's counter-clockwise but on AMD it isn't apparently. So, how do I know?

@LearnElectronicsRepair 2 жыл бұрын

Niki Nikolov Actually it is anticlockwise on AMD, but where Nvidia is A1,A01 B1,B0 etc, on AMD it is A0,A1 B0,B1...

@lopigard1 2 жыл бұрын

@@LearnElectronicsRepair Thank you so much!

@haithamdarwish6245 2 жыл бұрын

i have the same Card. the Sapphire Tri X Edtion and its been behaving really weird after i repaired it. for missing capacitors. it never boots after a long shutdown. i have to use Igpu and then go to device manager . disable and enable the card. then restart and it will work that way. and usually during any gaming sessions it would freeze entire pc. and a notification " Default wattman settings has been restored, due to driver failure" pops up/. i looked on the PCb and its still missing 2 capactiors C715 and C1281 i think. and 2 smaller componentes Named D12xx something. could that be the problem or is it a ram problem>? would greatly apperciate ur help . sorry for the long post

@georgibayramski8178 Жыл бұрын

@@haithamdarwish6245 yes this can cause to not boot or give you errors on memory test. happy new year.

@jakir_studio 2 ай бұрын

Checksum error in 2.pmf the file is corrupt

@Meister2023 Жыл бұрын

amazing job...tanks

@sinbyt3844 2 жыл бұрын

Great video! do you know how to diagnose a quadro card?

@ibrahimhakkicandan 2 жыл бұрын

Hi, i have a r7 370 2g gpu when i select option 3 it stucks at filesystemtype is ext2fs, partititon type 0x83 Kernel /boot/vmlinuz ... invalid or unsupported executable format pls help

@YoshiXTX 2 жыл бұрын

1. Download gparted-live-1.4.0-1-amd64.iso and write it on a USB stick with Rufus 2. Boot from the USB stick and when in the Gparted Live desktop open a terminal 3. Type in the terminal this command: sudo resize2fs -s /dev/sda3 Where sda3 is the 3rd partition from the video above. This will change the filesystem on that partition from EXT4 64bit to EXT4 32bit. Restart and boot from the HDD, select the 3rd option like you wanted, it might do a e2fsck on the first boot but should run ok after that.

@ibrahimhakkicandan 2 жыл бұрын

@@YoshiXTX thanks for helping i will try in a few days and let others know if it works.(it worked thanks again for helping

@jagerserwis 2 жыл бұрын

@@YoshiXTX Ty so much, iwas suck ith this for 3 days

@Trb_informatica 6 ай бұрын

I have 3 options to boot, but when it loads it appears on a different screen

@ranasaqib1 Ай бұрын

Kindly make video for amd mats test plz

@evriyanto9181 7 ай бұрын

I extracted 3.pmf but the PATH GUID didn't appear, where did I go wrong, bro 🙏🙏🙏

@maz.reparateur 4 ай бұрын

Hello and thank you Richard. Would you mind if I share your files in my KZfaq content ? All my subscribers will know you are the source.

@deadgamer9808 2 жыл бұрын

hey bro when i started pc the test automatically runs it does not gave me option to choose card or anything is it normal

@TechnologyHive 11 ай бұрын

I get "missing operating system" error. Does not work here unfortunately.

@nfgamesreviews1972 2 жыл бұрын

Thank you .

@shahsuleman7552 2 жыл бұрын

Good day. the google link for part 3 is not downloading. can you please share it again so i can download..? Cheers

@hakank23 2 жыл бұрын

thanks for sharing

@RealNovgorod 2 жыл бұрын

Hey, is there a way to boot this image in UEFI mode at all? I want to use it on a motherboard that has ONLY UEFI and no option for legacy boot (yes, that's a thing now and there's no way around except for a BIOS hack which nobody is going to do for this obscure mobo model). The 2 tinylinux partitions can be booted in UEFI mode but then it won't launch the memory test tool, of course. Is there maybe some kind of legacy emulator that I can boot from USB in UEFI mode and which in turn can boot the hard drive in legacy mode?

@LearnElectronicsRepair 2 жыл бұрын

I don't know exactly - I had this software for a few weeks and could not get it to work for two reasons: First problem - it would detect the GPU but then say 'invalid register' and stop before the menu appeared - this in the end I worked out was because I needed to disable the embedded intel graphics on my motherboard - Gigabyte B85M. This may or may not apply to other setups, it's just what I worked out after no one on badcaps forum could come up with an answer. Basically played around and worked out that MATS would give this error if I ran it manually from the hard drive, then i googled MATS plus the error message and found a Chinese language forum (yeah I know the Chinese don't speak Chinese, they speak Mandarin or Cantonese mostly) and google translated that enough to understand what was happening Second problem - The hard drive would then boot and run the a VRAM test automatically - but I could not get to the menu. This is the one I worked out by chance - in my BIOS in the BOOT order section, I had to move the hard drive to the top of the list, above the UEFI boot options, Saved that, and then it worked.

@RealNovgorod 2 жыл бұрын

@@LearnElectronicsRepair Thanks for the tip with the onboard GPU, I think that's the problem. As I said, I could boot the 2 tinylinux partitions individually with the UEFI boot menu - I assume one is for 30 series cards and the other is for older Nvidia cards (like in the menu which you'd get without UEFI). But neither of them started the memory test with a GTX 1080 installed. Of course I didn't expect the 30 series tool to work with a 1080, but the other one showed the same error as you described and I do have an onboard Intel GPU. I'll switch the display from auto to PCI-e and try again. And by the way, the written Chinese is actually Chinese (traditional in Taiwan and Hong Kong and simplified everywhere else), only the spoken Chinese has dialects (Mandarin, Cantonese, Hokkien etc.)...

@RealNovgorod 2 жыл бұрын

@@LearnElectronicsRepair Bingo! Disabling the iGPU worked right away, thanks mate! Now I just have to figure out what to do if ALL memory banks show write errors :D...

@LearnElectronicsRepair 2 жыл бұрын

@@RealNovgorod Thanks for correcting that Chinese is Chinese (written) :D

@vrushabkudchi5328 2 жыл бұрын

I dont have a hardisk anyway to check my vram my gpu is not working at all it’s completely dead

@PhatNguyen-pu1ju Ай бұрын

Video test VGA amd tks

@rafixend 2 жыл бұрын

Thank you! But the download quota has been exceeded always when I try to download. The third file is quite large, 32GB.

@LearnElectronicsRepair 2 жыл бұрын

@Radu Fx - did you try the new links I posted in the pinned comment yesterday? I split the 32Gb file into 4x 8Gb files. Is that working for you? I just tried the first part and it seems OK

@ScoopDogg Жыл бұрын

just click in downloads column the next day and press the play button logo it should continue even if you turned the computer off, the files still in download just paused (thats if you didnt cancel the download when it stopped) Dont click the continue downloads in the top right alert box that pops up first, ignore that one and click "downloads" because if you press the alert that pops up in a box it usually restarts the whole thing again

@manyitoagg3255 8 ай бұрын

Hello, is there a test for the rx 6600xt?

@WilliamVG 2 жыл бұрын

Are we able to run a diagnostics test when a card doesn't have a video signal? I'm guessing we can change the code to have it run immediately and powerdown on its own?

@LearnElectronicsRepair 2 жыл бұрын

Yes - as long as the video card will detect (or you can force it to ignore memory errors and detect) as a second display. I'm working on another video showing how to do this in Linux, using the integrated graphics. There is another way, using MATS running from a USB drive to auto run on start up, save the log file and auto shut down the PC at the end of the test.

@krolyon1784 7 ай бұрын

Hey man, Imkinda pre-developer.But i cant work to active due to my issue., Ty as much as i got the vid. ppl kind. not much exist dk howm will u check it out but,n short TY For The ViDEO/Explanations/Useful Tips/Pre-Links... Its Epic Longstory. TY For ur Talented Explanations.HaveWellWork.Greetings from TR..

@betaunknown Жыл бұрын

Will there be a MOD MATS leaked for RTX 4000 series?

@Mjj49 2 жыл бұрын

Greatings For Brazil! Master! On "part 1" are files for 30xx. And I checked there are only for 3060, 3070, 3080 and 455.127. I need it for "3070 ti". Should I use 3070?

@maicksilva686 3 күн бұрын

mano conseguiu colocar pra funfar os amd ?

@madyunussay 7 ай бұрын

Hello brother, I am repairing the graphics card. Is it possible to convert an 8gb card to 6gb in the rx series? For example, the chip is faulty, even if the d0 and 01 vrams are changed, it still shows faulty. In this case, is it possible to disable d0 and d1 and run the card as 6GB?

@effingandjeffing8270 6 ай бұрын

That will usually be the GPU core needs reballing as the balls have cracked under the GPU