No video

How to Do a Oil Change on a 17-23 GSXR1000

  Рет қаралды 10,164

AC Productions

AC Productions

Күн бұрын

In this video I show you How to Do a Oil Change on a 17-23 GSXR1000
Mobil 1 racing 4T 10w40 you will need 4qts but only use 3.5
amzn.to/3wXs116
K&N Oil filter KN-138
amzn.to/3DJTWoY
Drain Plug Gasket M14
amzn.to/3XcyEXY
Rubber Strap Oil filter wrench
amzn.to/3X7E3j8
Suzuki Oil Filter Wrench Socket 09915-40620
amzn.to/3lbNOzt
Oil Filter Wrench Removal tool for Suzuki
amzn.to/3YdSoMf
plastic pry tool kit
amzn.to/3yhX8by

Пікірлер: 48
@HemiBurns
@HemiBurns Жыл бұрын
I do the oil drain plug first and then the filter so less oil is left to drip onto the header from the filter.
@chutch332
@chutch332 Жыл бұрын
I have never taken off the fairing. Losen two allen bolts by your left foot side of bike. Ease your socket in & take off the oil filter. Give it a shot! 😊 Saves a ton of time and as your faring gets older the plastics wont crack when u snap them apart.
@drakon1300
@drakon1300 11 ай бұрын
I drain the oil first then remove the filter. I used an empty 1 gallon water jug cut to fit under the filter to catch the oil. Not one drop of oil got on my exhaust pipes.
@ACProductions77
@ACProductions77 11 ай бұрын
I will have to try that next time, thanks for the tip
@Daddiboiz
@Daddiboiz 5 ай бұрын
I did exactly the same thing but with a 2 liter soda bottle. The curvature helped get right under the lip where the filter mates to the engine.
@hisaanhaq4116
@hisaanhaq4116 4 ай бұрын
Just to confirm you put 3.5 quarts in? My dealer put 3.5 litres in which is more like 3.8 quarts about mid way in sight glass when bikes cold
@ricksimmonds
@ricksimmonds Ай бұрын
You used the wrong gasket and left the old one on the plug 😅 ... the oem washer is a crush washer and they are a pain to get off tbf
@miamimotogroup5371
@miamimotogroup5371 Жыл бұрын
Aluminum foil works better. You can make a funnel below with it
@chrissummers9800
@chrissummers9800 9 ай бұрын
3.3 litres
@King88_8
@King88_8 7 ай бұрын
Always drain oil first then filter.
@ACProductions77
@ACProductions77 7 ай бұрын
thanks for the tip
@pumpgas1
@pumpgas1 Ай бұрын
how about showing how to check the oil level after warm up? you did 90%
@ACProductions77
@ACProductions77 Ай бұрын
thats on the next video.
@caseylozano4336
@caseylozano4336 4 ай бұрын
Don’t be a quitter get that old crush gasket off bro
@ACProductions77
@ACProductions77 4 ай бұрын
its definitely getting replaced on this up coming oil change.
@casey3235
@casey3235 3 ай бұрын
that belt is called a strap wrench. fyi
@enjoytheride1377
@enjoytheride1377 Жыл бұрын
I usually get the Motul. Is this oil fine ? Mobil 1 racing 4t for a 2018 GSXR1000? It’s nice to just go into Walmart or soenthing and just get hands on the oil right away.
@downlowgo_401
@downlowgo_401 5 ай бұрын
I’ve used mobile 1 in all my bikes for almost 20 years
@codylinnartz-ti1lm
@codylinnartz-ti1lm 5 ай бұрын
Don’t use kan to much flow it will mess up your engine.ams oil filter have the best filter!
@ACProductions77
@ACProductions77 5 ай бұрын
ill give that one a try for the next oil change, so far I haven't had any issues with K&N.
@user-nk6or9jl4k
@user-nk6or9jl4k Жыл бұрын
🎉🎉🎉
@markcontreras4035
@markcontreras4035 11 ай бұрын
You didn’t show you draining the oil with the lil bolt on the side
@ACProductions77
@ACProductions77 11 ай бұрын
i figure that be boring to watch so i cut that out
@jordanwigley6153
@jordanwigley6153 10 ай бұрын
Can you push that header valve in any? I can move mine in and out and im jw if thats normal or if its loose
@ACProductions77
@ACProductions77 10 ай бұрын
ya you shouldn't be able to move it at all, if you can that means its loose and you need to tighten the bolts.
@michelebianchetti3471
@michelebianchetti3471 Жыл бұрын
The manual says to tighten the oil filter 2 full turns after the gasket touch, isn't that too tight? Thanks
@ACProductions77
@ACProductions77 Жыл бұрын
once the gasket touches & you hand tighten as much as you can I wouldn't go past tightening a half turn more with the wrench. as that will too tight and you run the risk of damage when it comes to removing it.
@MotoFlows
@MotoFlows Жыл бұрын
There is reason for 2 full turns, do it.
@King88_8
@King88_8 7 ай бұрын
Would be impossible to do 2 turns. Hand tighten and then max 1/4 turn. For years we actually just hand tighten and never ever had an issue
@MotoFlows
@MotoFlows Жыл бұрын
You didn’t do the 600 mile break in oil change? Noticed you had 1098 miles on the bike…?
@ACProductions77
@ACProductions77 Жыл бұрын
yes i was supposed to do that had a appointment with the dealership, but those 600miles was too quick as it was the next day when i reach those miles and the dealership was booked for a month. so thats why I had 1k miles by the time i made this video.
@downlowgo_401
@downlowgo_401 5 ай бұрын
@@ACProductions77you should change the oil within the first 50 miles
@colbykai8622
@colbykai8622 Жыл бұрын
What is the tool to open your fairing ?
@ACProductions77
@ACProductions77 7 ай бұрын
plastic pry tool link is in the description box for the tool
@michaelheraghty9321
@michaelheraghty9321 3 ай бұрын
@@ACProductions77 where in the description?
@ACProductions77
@ACProductions77 3 ай бұрын
@@michaelheraghty9321 its the last link in the description, but here is a quick link> amzn.to/4bl0qt7
@NguyenTien-df6os
@NguyenTien-df6os Жыл бұрын
I change oil and oil filter about 3,6L does it right ? I don't know much about bike :v hope you reply
@ACProductions77
@ACProductions77 Жыл бұрын
the bike only holds in quarts if you put in by the liters then its to much. 3.5 quarts with filter change
@izzysykopth
@izzysykopth 8 ай бұрын
@@ACProductions77even 3 liters is too much
@ACProductions77
@ACProductions77 8 ай бұрын
@@izzysykopth its not 3liters its 3 quarts.
@izzysykopth
@izzysykopth 8 ай бұрын
@@ACProductions77 work on your comprehension skills...
@ACProductions77
@ACProductions77 8 ай бұрын
what do you mean? @@izzysykopth
@MotoFlows
@MotoFlows Жыл бұрын
How does the bike like that mobile 1 oil?
@ACProductions77
@ACProductions77 Жыл бұрын
good so far , no issues
@MotoFlows
@MotoFlows Жыл бұрын
@@ACProductions77 thanks for the reply
@ACProductions77
@ACProductions77 Жыл бұрын
@@MotoFlows no prob
@downlowgo_401
@downlowgo_401 5 ай бұрын
@@MotoFlowsI use mobile 1 in all my bikes always
@izzysykopth
@izzysykopth 8 ай бұрын
Paper towels leave lint bad choice
How to Reset the Oil Service Light on your 17-23 GSXR1000
8:35
AC Productions
Рет қаралды 10 М.
Schoolboy Runaway в реальной жизни🤣@onLI_gAmeS
00:31
МишАня
Рет қаралды 2,1 МЛН
黑天使遇到什么了?#short #angel #clown
00:34
Super Beauty team
Рет қаралды 42 МЛН
TOYOTA VIOS;  Change oil and flushing.  | DIRT MECHANIC
4:34
Dirt Mechanic
Рет қаралды 7 М.
DON'T Make These Common Oil Change Mistakes With Your Car!!
6:24
Budget Mechanic
Рет қаралды 711 М.
How to Change Oil on 09-16 GSXR 1000
10:59
Vibin N Ridin
Рет қаралды 2,5 М.
Save Money with D.I.Y Motorcycle Maintenance - GSX-R 1000
22:31
Josh from AusMoto
Рет қаралды 1,8 М.
STOP! Lube Your Motorcycle Cables
5:01
Chaos Causes
Рет қаралды 609 М.
Modifying My 2017 Gsxr-1000 | With Highly recommended Accessories
28:09
2020 Suzuki GSXR1000 | First Ride
34:46
Chaseontwowheels
Рет қаралды 376 М.