How to Easily Drain Fuel

Рет қаралды 66,289

3 жыл бұрын

Check it out!
Today I'll be showing you a very simple method you can use to easily drain or transfer fuel from one container to another!
In this video I'm I'll be using a jerry can filled with old fuel, and transferring some of the old fuel to a glass jar to demonstrate how this works.
_______________________________________________
If you enjoyed the video, hit LIKE & SUBSCRIBE!
New videos every week!
SOCIAL MEDIA:
Instagram: ELMN80R
/ eliminatorperformance
/ elmn80r
/ eliminatorperformance
DONATE:
paypal.me/ELMN80R
Bitcoin: 1NYgPvcvBWuhGRewsLE4Scy1cbzwndh5hZ
2ND CHANNEL:
EP Vlogs: / @eliminatorperformance...
GEAR:
Camera: amzn.to/2HVkW9o
Tripod: amzn.to/2HGWt4w
Microphone: amzn.to/2J7k9DA
Cheap Mic: amzn.to/2xCBn6z
Headphones: amzn.to/2JeHUG9
Editing Software: amzn.to/2JD7OTx
Photoshop: amzn.to/2HBY6Ez
MUSIC:
Intro/Outro Music: Burnt - Jingle Punks

Пікірлер: 70

@242sp 3 жыл бұрын

This old dog is always learning new tricks from you and your channel, thanks for taking the time and sharing your knowledge.

@EliminatorPerformance 3 жыл бұрын

Thanks for watching!

@waynestefinashen239 3 жыл бұрын

Mr. Funnel works as it is advertised, Steves Small Engine Saloon has a video just on this funnel and shows how a bottle of water is poured in and no water comes out.

@jerrymay3806 2 жыл бұрын

That's one of the best tricks I've seen for fuel transfer! Thank you!

@Rein_Ciarfella 9 ай бұрын

I’ve seen the first part of this tip before, but I had some questions. By the end of the video you answered every question I had and also gave other ideas! Thanks, Jake!

@raymoss5805 3 жыл бұрын

I have to remove some fuel from my snowblower and this information is exactly what I needed. Thanks again for your valuable experience. I appreciate your your channel. Thanks again.

@EliminatorPerformance 3 жыл бұрын

Thanks for watching!

@firkopersson 2 жыл бұрын

Great tip! I've always been hesitant about siphoning fuel, will try this next time :)

@Sam-mx2pi 8 ай бұрын

Already have the second trick, love the first trick! Great video. Thanks!

@fanfan-tz2tk 3 жыл бұрын

thanks for sharing this tip with us

@Lovinflyindrones2022 3 жыл бұрын

As I’ve said before I love your great informative. Thorough money saving videos. Thanks Eliminator Performance

@EliminatorPerformance 3 жыл бұрын

Thanks for watching!

@minouchat 3 жыл бұрын

At the risk of repeating it, thank you for your tips and ideas that you share with us every week. You are a very good reference, both in mechanics and in technique and distribution of ideas. Every week, I am like an anxious dog who waits and knows that his master will arrive shortly. God Bless

@EliminatorPerformance 3 жыл бұрын

Thanks for the kind words!

@JungleBobRepair 3 жыл бұрын

Thanks Eliminator!

@tcsail09 3 жыл бұрын

Another excellent tip, thanks.

@EliminatorPerformance 3 жыл бұрын

Thanks for watching!

@mc2whls 3 жыл бұрын

Interesting method for starting the siphoning.

@EliminatorPerformance 3 жыл бұрын

Thank you!

@stagsmcnasty1 2 жыл бұрын

Thank you very much.

@bobadams1696 Жыл бұрын

Good video man. Like the tips.

@brucer1220 Жыл бұрын

Love your videos dude... I get what I can out with siphon hose then use a turkey baster to get the rest. Sometime jacking the front up helps get that last drop of bad gas.

@waynestefinashen239 3 жыл бұрын

Some people are using the oil extractors to remove fuel, not too sure if that is safe since most of them say for oil only not to be used on gasoline. Nice easy way to transfer and drain fuel, thanks once again.

@EliminatorPerformance 3 жыл бұрын

Yes the oil extractors are not meant for fuel, only oil!

@LewisMowersandBoats Жыл бұрын

Man that is awesome brother Jake 🙌 thanks for the tip 👍

@kbssmallenginerepair2615 3 жыл бұрын

Very cool trick, thanks for sharing!

@EliminatorPerformance 3 жыл бұрын

Thanks for watching!

@kjell-richardlvdal373 3 жыл бұрын

Great video, easy fix

@EliminatorPerformance 3 жыл бұрын

Thanks for watching!

@chuckward797 3 жыл бұрын

thanks for the info

@EliminatorPerformance 3 жыл бұрын

Thanks for watching!

@joehorecny7835 Жыл бұрын

Nice!!!

@christinesmith7625 3 жыл бұрын

SWEET !

@EliminatorPerformance 3 жыл бұрын

Thanks for watching!

@billlovett4256 3 жыл бұрын

Cool trick with the air gun and tubing

@EliminatorPerformance 3 жыл бұрын

Thanks for watching!

@francislang5075 3 жыл бұрын

cool trick

@EliminatorPerformance 3 жыл бұрын

Thanks for watching!

@kenhilson786 3 жыл бұрын

Since that funnel setup always has fuel left in it even if no water I pour what's left back into the gas can . I only discard it when the fillup has actually emptied the can.

@brucer1220 Жыл бұрын

My favorite fuel stabilizer for mowers, boats and etc. here in Florida is "Marvel Mystery Oil". I use about 8 oz per 5 gallons. It also gives extra power and cleans the top end of carbon. Price per oz is affordable and not crazy like others brands also.

@CatsMeowington 2 ай бұрын

I have been using MMO for many, many years and it works well. It started it's life back in 1923 at a carburetor manufacturing company in Chicago. They created this product about that time to prevent their carburetors from clogging. I use it in gasoline but not oil. The product says you can use it in the oil but I do not. Modern oil is the only product to use. Many manufacturers will negate their warranty if you use oil additives such as MMO. I just use it in gasoline to keep the fuel system clean. A long time ago I accidentally left some wrenches in some MMO for some minutes. The wrenches never looked so good, I think they looked better than when they were new. I was very impressed with MMO cleaning on metal.

@zurialjazz Жыл бұрын

Great video for small engine repair. Always gas

@henrirt8991 10 ай бұрын

You don't need to drill the hole in the siphon tube! Just cut the end of the tube at an angle and lay the compressor nozzle against the angle and it will do the same thing.

@boondocker7964 3 жыл бұрын

Mr. Funnel, ay? Got to buy one, you are wise as an owl, and sly as a fox.

@EliminatorPerformance 3 жыл бұрын

Thanks for watching!

@bobgieser2943 3 жыл бұрын

great video, thank you. your voice and speech is great for this type of learnimg. All business. no BS. THANKS AGAIN.

@EliminatorPerformance 3 жыл бұрын

Thanks for the kind words, and thanks for watching!

@dj5752 2 жыл бұрын

Great Video. Thank You. What size rubber hose did you use, and what size drill bit?

@EliminatorPerformance 2 жыл бұрын

I forget, any hose will work

@waynechildress8425 2 жыл бұрын

I transfer hydraulic oil with a air hose pressure

@shaneksmith1957 Жыл бұрын

Where do you put your bad gas?

@donvoll2580 3 жыл бұрын

Good day Yes I have that funnel, a few down sides to it, but if it gets water, good. Yea I wondering if you put that in Ford. Boy the expensive gas, better buy chev. LOL Thanks good video.

@EliminatorPerformance 3 жыл бұрын

Still love my Ford, thanks for watching!

@adamluke1289 3 жыл бұрын

If I were a company making/selling tools and gadgets, I'd send 'em to you to promote (of course they'd have to be good!). I've bought numerous things shown in your videos (unlike all the other KZfaq videos I watch).

@EliminatorPerformance 3 жыл бұрын

Well I'll have an amazing product coming soon!

@kjell-richardlvdal373 3 жыл бұрын

I use alkylite gasolin on my small engine equipment, it can Stay one year without turn bad, the downside it is more expensive than ofdenary gas

@waynestefinashen239 3 жыл бұрын

Right on brother, likely the Aspen fuel made in Denmark. Is that a good guess.

@EliminatorPerformance 3 жыл бұрын

Yes we have Aspen2 and Aspen4 here it's engineered fuel, last 3-5 years so says the brochure.

@kjell-richardlvdal373 3 жыл бұрын

NORWAY

@BrucesShop 3 жыл бұрын

I have an old fuel tank as well.

@EliminatorPerformance 3 жыл бұрын

To be honest I have about 6 of them lol it's unbelievable how much fuel we get to reuse. But I'd never put it back into customers single cylinder engine after a carb clean, I just freshen it up and dump it into the old f150

@dewanjenkins9365 3 жыл бұрын

Where can I get the one way check tube?

@waynestefinashen239 3 жыл бұрын

Dewan not sure where you are from but in Canada Canadian Tire carries them sometimes called shaker tubes

@amend5269 8 ай бұрын

Just add a tee

@TheLaidbackBiker 7 ай бұрын

Bro, you don't have to drill anything. Just blast the air at the tip and it will begin sucking the fuel out.

@dennisjoiner3717 2 жыл бұрын

Good video's but whats with shades? Strange intro, but I can skip past it.

@EliminatorPerformance 2 жыл бұрын

I have a photosensitivity issue, always wear shaded glasses, as they're prescription. Thanks for watching!

@TheoSmith249 3 жыл бұрын

I’m pretty sure I just watched a siphon. And if your compressed air is unavailable use your mouth .

@EliminatorPerformance 3 жыл бұрын

Yes same technique, but this way you don't get gas sickness lol

@Truckminstery Жыл бұрын

Hey I'm 15 and my brother used to buy fix and sell mowers weedeaters and riders and he moved and he gave me all his tools but I don't know anything about fixing mowers weedeaters or riders so I was wondering if u can make me a video on all the stuff about fixing lawn mowers weedeaters and riders