Fantastic! I thought the r hop material had to be some sort of tubing, just didn't know what. Now I don't have to pay $15 for 3 tiny patches that I'll probably mess up trying to get right anyhow. Also a very clever way to size and cut the material.

Thank you so much, using your method my l96 shoots with much tighter groupings.

When the straw was spinning I couldn't stop laughing for some reason 😂

love the intro

you could draw the patch from the end of the drill to skip carving out one side, also more accurate

Use a carbon arrow (cheap ones around $2) They have the perfect 6mm diameter

Ok I have a ares striker I was wondering if I can just drop in a concave hop arm and a maple leaf bucking with out to much modifications?

Very good method

Thanks a lot for sharing this.

What type of tensioner are you use? (m-nub) , any links?

They seem to not have ANY barrels in stock anymore at the clandestineairsoft.com link you gave. Where can you get good cheap stainless steel barrels, do you know?

Awesome video man

We're did you get that black rubber ring on your barrel ?

Hey Brain, what do you think about flat hopping? I've been contemplating it for quite a while, but I was still not too sure if it's worth doing. I've heard of various methods of doing so for the nub, including homemade eraser nub, the Firefly Namazu nub, the Maple Leaf RTX concave nub, the Modify flat nub, and that's about it :P . I would not feel comfortable doing the mod with an eraser nub, since it requires you to sand off the nub holder on the hop up arm, and I don't think I could do that very well without a dremel. I also wouldn't really wanna go with the Firefly nub since it's $17 and out of stock in Amped Airsoft. I'd be down to go with any other nub mentioned above, if they were to yield good flat hopping results. I already have good air seal and a 6.03 inner barrel, do you think any of these pre made flat nubs would give better results than just a normal bucking and nub combo, such as the G&G Green bucking I currently have? Or should I just stick with regular bucking & nub combos?..If I were to flat hop, I would use a good bucking such as another G&G or Lonex 70d. Thanks for reading this and I'd appreciate any help or info.

I would like to ask if someone can confirm which tubbing part on McMaster shop is required? 51135K171 ? Is that the most suited tubing? Also,don't know if McMaster ships overseas.

Hello, I will ask about your barrel. Can you tell something about it? It is looking pretty good and it is cheap. Have you got any videos where you are using it?

What makes this patch? Is it works as a hop up rubber?

Thank you.

when you say metal rod as close to 6mm as possible my mind immediately went to the back end of a 6mm drill bit... you can get cheap chinesium drillbits for like 1 dollar a piece, take off the cutting edges at the front end and use it instead. or use a 5.5mm drill bit and wrap painters tape around it once, then you can use a regular ballpoint pen to give a more fine/accurate line of the window.

DRUM AND BASS IN BACKGROUND!! MY MAN!

M4 rifle's rear/front receiver pin works better. The pin's diameter is about 6mm so it doesn't move at all. Great video btw.

I bought the tubing linked, and it’s WAY too thick. The inner diameter is too small, though the outer is pretty good. I’ve spent hours and hours sanding, I’ve tried a dozen times, and I cannot get it so the bb will roll through the barrel with bucking installed. If I’m doing something wrong, please help! But if not, I highly recommend finding a thinner tube.

I have seen alot of r-hop videos comparing range and accuracy of the r-hop versus some standard hop unit and bucking. But I currently have a retro arms hop unit, with madbull 6.03 inner barrel and a prommy purple bucking and nub. Would I see any performance gain in range and accuracy with an r-hop or even flat hop compared to this set up, and if so why?

To make it works i need some special hop up rubber or something else?

+BrainExploder You should do another sniper gameplay. I recently got to go to southern cali and got 250 foot kill with my vsr @ code red. great day

DID U CUT THE BARREL OR NOT?

Do you need these patches for a flat-hop set up?

Good

so Im trying to find the answer to when it's in the gun do you need a outer bucking

Hey Brain I have a question, I tried to Flat Hop two guns and for the guns I'm using good barrels and hop ups and I'm using good .28 bbs, I did everything correct and I'm even using maple leaf flat hop nubs and correctly cut buckings of the same brand, instead of increasing my range, it doesn't do a single thing to the gun and when I try to turn the hop on all the way, it ends up blocking the BB's path and it doesn't let the bb go through, jamming the gun and not even letting me fire unless I decrease the hop. I'm doing everything exactly correct, but I haven't got any clue on why it's not working. Is there anything you or anybody else reading this can tell me to fix it?

is the CZ p 09 still your main sidearm?

Im trying to R Hop my VSR, but the bucking is weird and I cant flat hop it. Any ideas?

Why would you use 3/16 ID vs 6mm ID?

the inner diameter of that tubing is only 4.76 mm, is there a reason why it's not 6 or

make a full r hop tutorial

OR. You could cut a small piece of zip tie and place it under the hop up arm on top of the bucking. That way, the arm applies a flat even pressure on the bucking. This is basically the concept behind the maple leaf “i-key” and it works in my WE m&p. It shoots like 260fps w/ a .28g out past 150ft. Youre welcome

What nub should I use for r hop

does it increases the precision?

this is some ninja sh**

i wish i also had the tools u have =(

Shoving a metal rod up your barrel seems like a very very bad idea. I bought a silicone rod instead and even that has left an abrasive mark.

Does gbbr worth it??

when can we collaborate on a video at tac city fullerton i would love to bring my gopro and film with you of course you will have a copy of my footage get an angle you really see that much me filming you playing airsoft for a few rounds

are you sure that 51135K17 is the right part number? i cant find it for the life of me...

Why can't they just make a barrel without the square part removed?! Awesome video ty

what actually is a R hop and what does it do?

+BrainExploder You could modify the link in the description to this: www.mcmaster.com/#51135K171 it'd make it go to the exact product instead of people having to search through the list for the right number.

now you can send me both rhop and BE patches

Nowadays you can just buy the precut Rhops for most barrels

Too bad that the McMaster don't ship international orders because stupid reasons. Some of you nice US gentlemen/ladies should buy that silicon hose and put it to ebay. I would like to take 5ft of it and I can pay double of the original price. :)

R hop is just patching the whole of the inner barrel?? No curve or anything inside of it..help please...haha

You really needed the drill to do that...

Why would you Rhop if you can Shop?

why didn't you just use a 6mm drill instead of that cleaning thing. 6mm drill fits just right inside the barrel and then make it.....!?!?!?!?!? almost everybody has a drills at home!!!

e a cosa cavolo servirebbe? ??

I dont really understand why you would use the metal rod and knife for cutting the length of the patch, that/those are the easy cuts, the hard cuts are the last ones.. Or just buy some r-hop patches..

easier and simpler method is just to use an Rhop cutting jig from a 3d printer. this is too complex and needlessly convoluted.

But I thought r-hopping a barrel made it better...

Sugru would be way easier than this.

What a confusing video, didn't explain which bucking need neither which nub or how can fit it in

when can we collaborate on a video at tac city fullerton i would love to bring my gopro and film with you of course you will have a copy of my footage get an angle you really see that much me filming you playing airsoft for a few rounds