How to Engineer Wood Diaphragms | Sheathing | Nailing

No video

How to Engineer Wood Diaphragms | Sheathing | Nailing | FULL EXAMPLE

Рет қаралды 8,252

Күн бұрын

Part 2 of our FULL BUILDING design example. We tackle the design and engineering of the wood diaphragm, including sheathing, nailing type and spacing. This is a full wood design example under seismic design criteria.
Imagine what 5000 engineers can accomplish collectively... lets find out together.
👇 SUBSCRIBE TO KESTÄVÄ ENGINEERING’S KZfaq CHANNEL 👇
/ @kestava_engineering
For business inquiries email: kestavallc@gmail.com
Connect with me on LinkedIn 👇
/ richard-racz-pe-620b1792
Brave Browser 👇
brave.com/
(I am not affiliated or receive compensation from Brave)
Music I Use 👇
www.epidemicso...
.
.
.
.
.
.
.
.
.
Disclaimers: Richard Racz, P.E. does not hold the title "structural engineer". Any claim of it in the videos or descriptions is unintentional and is superseded by the title "civil engineer" in the states of MA and OR.
The Kestävä KZfaq page is intended for informational purposes only. Nothing contained in, or provided through, this KZfaq page is intended to constitute advice, or to serve as a substitute for the advice of an engineering professional. Any reliance you place on such information is strictly at your own risk.
Under no circumstances will Kestävä be responsible or liable in any way for any content, including but not limited to, any errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated on this KZfaq page.
#wooddesign #structuralengineering #kestavaengineering

Пікірлер: 22

@Kestava_Engineering 2 жыл бұрын

We don't cover chord forces yet!

@stevenauyeung1410 2 жыл бұрын

stuff they dont teach you in school, bless you

@sugv10 2 жыл бұрын

Hello! where is the part 1? please

@ehabaltimimi660 2 жыл бұрын

Even I passed the exam, but I am still like your examples, good job my friend.

@Kestava_Engineering 2 жыл бұрын

great job passing Ehab!

@Benata 2 жыл бұрын

Been looking into plates and reading timoshenko and that famous monogram. What is your opinion? Rourke timoshenko monograms or fem analysis of shells.

@alit250 Жыл бұрын

Hey Richard, awesome video! I needed this while designing a diaphragm and shear wall. I didn't quite understand how you came up with the 48 ft "zone A" regions. I didn't get where the 48 ft number came from. Cheers

@Kestava_Engineering Жыл бұрын

you can break up your diaphragms into sections when you have a large enough diaphragm. as you get closer to vertical lateral elements (shear walls braced frames etc) your shear demand in the diaphragm increases, but the opposite is true as you get to the mid point of the diaphragm between vertical lateral elements. so at a point you can call out a lighter diaphragm to save on nailing and potentially sheathing thickness. take a look at your shear diagram to help you determine where you can create another "zone" cheers!

@stevielloyd9687 2 жыл бұрын

Hi, I'm loving your videos, super helpful! Maybe I am interpreting something incorrectly, but at 2:35 you say our W=256' and our L=120', but then you do the aspect ratio calculation (a=L/W), you do a=256'/120' which would be W/L according to how you defined your variables. I'm brand new to this so I want to make sure I'm understanding it correctly!

@Kestava_Engineering Жыл бұрын

its always W/L in the direction your looking at. so if you have a rectangle, then in one direction your aspect ratio will be high and in the other direction your aspect ratio will be very low. think about if the diaphragm was a piece of soft foam and your trying to bend the foam. the direction that is harder to bend has the lower aspect ratio because its stiffer.

@SouthBayEngr 2 жыл бұрын

What’s the title of the Part 1 video?

@b0bbydigital14 Жыл бұрын

that's what I'm saying

@user-lc1md7pj9f 7 ай бұрын

Where's the part one?

@Kestava_Engineering 7 ай бұрын

on my channel! check out the wood design collection

@jin9724 2 жыл бұрын

Hello, I just wonder where is part 1 of this example that you are referring to in this vid? Thank you! [Update] Nvm. I found it. Thank you for what you do and this is really great vids. Thanks!

@Kestava_Engineering 2 жыл бұрын

thanks for tuning in Jin and im glad you found it!

@sugv10 2 жыл бұрын

Hi, where is part 1? i can't find it

@mpokharel2010 Жыл бұрын

@@sugv10 kzfaq.info/get/bejne/acmUl9Oh2KyxkWQ.html