How To Find A MTB Cockpit Set Up That Works For You

How To Find A MTB Cockpit Set Up That Works For You | GMBN Guide To Bike Set Up

Рет қаралды 192,242

4 жыл бұрын

Our individual mountain bike setups have so many variations because we're all unique! With that in mind, we're not here to tell you that flat levers are the answer and we're certainly not here to say that rolling your bar forward and getting the shortest stem on the market is right for you. We're here to break it down, get you to a good starting point and then help you find that perfect cockpit set up that works for you! Is your bar actually in the centre? Could you modify your grip to suit your hand shape better? Would flatter levers help address the harsh feeling you get or would they make that steep terrain you're always riding harder? Henry's covering all the bases!
Subscribe to GMBN Tech: gmbn.tech/subscribetogmbntech
Pick up official GMBN merch: gmbn.tech/tM
Follow us on Instagram or Facebook! @gmbntech
Please submit your content to our uploader: upload.gmbn.com/tech we love to check out what you have been up to and may feature it on the show!
Watch more on GMBN Tech...
Watch Doddy's Geometry 101 here: 📹 gmbn.tech/Geometry101
Find out how Fork Offset affects ride here: 📹 gmbn.tech/ForkOffset
If you'd like to contribute captions and video info in your language, here's the link 👍gmbn.tech/tL
🎵 Music - licensed by Epidemic Sound
This Is 4 Us - Matt Large
#GMBNTech #GMBN #MountainBiking #MountainBike #MTB #BikeLife #Cycling #setup #bikesetup #cockpit
Brought to you by the Global Mountain Bike Network (GMBN), GMBN Tech delves deeper into the bikes, kit and technology that powers your rides!
Our mission is to help you discover, dial-in, and get the best from the latest cutting edge bikes and technology available.
If it’s off-road tech you’re after, look no further! The weekly GMBN Tech Show showcases the latest and biggest tech stories, with more besides.
Fancy some factory tours and first looks to keep you informed of how the latest tech has arrived, as well as what they do on the trail? You’ve got it. Want some in-depth maintenance videos give you the knowledge to set up, look after and upgrade what you’ve got? Yep, we’ve got them, too. Lots of ‘em. In fact, our presenting team consists of bike industry professionals with decades of experience of wrenching, writing, and working at the cutting edge of mountain biking so we can keep you informed, entertained and engaged with all the tech that drives mountain bikes forwards!
Thanks to our sponsors:
Canyon Bikes: gmbn.eu/Canyon
Nukeproof Bikes: gmbn.eu/nukeproof
Pole Bikes: gmbn.eu/PoleBicycles
Park Tool: gmbn.eu/ParkTool
POC helmets and eyewear: gmbn.eu/POCsports
crankbrothers pedals: gmbn.eu/crankbros
Ergon: gmbn.eu/ergon
Vittoria Tires: gmbn.eu/Vittoria
FSA: gmbn.eu/fsa
e*thirteen: gmbn.eu/EThirteen
Topeak: gmbn.eu/topeak
Garmin: gmbn.eu/Garmin
Muc-Off: gmbn.eu/Muc-Off
Mavic Wheels: gmbn.eu/Mavic
crankbrothers seatposts: gmbn.eu/8b
Komoot: gmbn.eu/Komoot
Facebook - gmbn.tech/gmbntechfb
Instagram - gmbn.tech/gmbntechinsta
Twitter - gmbn.tech/gmbntechtwitter

Пікірлер: 216

@trailfork7815 4 жыл бұрын

just a tip... try adding pillows around your room to minimize echoes when recording

@JustBens 4 жыл бұрын

One of the best upgrades to cockpit comfort I found is strengthening your lower traps/mid back. So many riders shoulders are hunched up round their ears and all that weight rolled forwards. Mainly due to modern phone/office lifestyle of being hunched over so you have a weak mid back and tight chest. Train to hold your should blades back and down and it will transform your riding comfort. As you ride imagine tucking your shoulder blades in your back pockets and you will soon learn how bad your posture is...Wrist pain, shoulder pain all 100% gone!

4 жыл бұрын

Also, the more straight the handlebar is (no backsweep), the harder it is to lower your elbows and engage your back muscles.

@DavidMaruca_ 4 жыл бұрын

yup. told my personal trainer that i wanted to work on this and after just 2 weeks there was a MASSIVE difference. Can't wait for social isolation to end so I can get back with the trainer.

@jasonmccune9313 4 жыл бұрын

i find i am all loose in the rest of my body but my shoulders and neck feel strained like im doing shrugs lol. I have a 50MM stem and 780mm wide bars with Rise: 30mm 5° upsweep, 10° backsweep and i do really like the feel. I think im just weak back lol its like you say i am in an office all day and i get neck strain from computer and then i feel it on the bike. Trying to figure out how to combat this on the bike. I am not sure if i am just too tight or if i need to do my position better.

@DavidMaruca_ 4 жыл бұрын

@@jasonmccune9313 my trainer makes me do this awesome exercise where there's a rope with handles tied to the ceiling and then i lean way way back at like a 45deg angle and then pull my body up until my hands meet my chest and then go back down. Absolutely great workout. Doesn't even hurt very much but gets your back muscles engaged.

@badsanta7356 2 жыл бұрын

@@DavidMaruca_ it's called body row

@desertcrab6331 Жыл бұрын

As a man in my 60's returning to my motocross glory days riding mountain bikes, I have found a LOT of things have changed since the 70's. There is so much out there that it is hard to wade through the weeds, but this video really helped with the technology side because I see it everywhere and many manufacturers aren't all that clear. This is now my base video for all thing cockpit related. I now have enough basics to experiment as I just happen to be placing 780mm bars on my hardtail in exchange for the stock 610mm bar. Had to add an extra spacer to accommodate the new stem, but I think I'll bring the stem down. Maybe I should have started with a 20-25mm rise bar instead of this 15mm, but I will keep at it until I find my perfect fit. Then you ALL know what will happen, I'll want to upgrade my bike and start over trying something new while having old reliable as a backup. Great video.

@sticksman7819 4 жыл бұрын

So intuitive Henry and could listen to all these guys talk for ages because the passion is there.but the best line is "I feel as if ive arm wrestled Pat Butcher"😂😂😂what a Line. I seriously need to tinker with my bike I'm 6ft 2" and I sometimes get the pins and needles feeling in my fingers when riding for 30-40 mins and my arms feel over stretched.thinking of the spacers as a start after trying saddle height,tyre pressure,fork tension.keep up the good work.

@derekanderson5607 4 жыл бұрын

Best video in a long time. Although I knew what you were talking about most of the time, it was a refreshingly simple approach. 3 weeks ago I moved my controls inboard for 1 finger braking and it's one of the best things I've done. Thanks guys.

@badlarry172 4 жыл бұрын

i could listen to this fella talk all day

@user-et4kw5fv8w 4 жыл бұрын

ASMR lol

@downhillers5863 4 жыл бұрын

Yes same

@thomashardbattle4287 4 жыл бұрын

I know Henry is so chill

@HFVidShotz 4 жыл бұрын

True. Knowledgeable and chill. But he could use a little sound deadening material in that area he is in.

@garytomas1757 4 жыл бұрын

I couldn't because I'd fall asleep in about 10 seconds. He seems like a nice guy but I hate when I click a video and it's him and not Doddy. I guess all I have to do is not watch it.

@TheDustyShredder 4 жыл бұрын

Just one addition: crank length can drastically affect fatigue and bike fit. On a frame with a 17.5 inch seat tube (yes, i know it's the old standard), 165mm cranks offer me the most efficiency and the most power and speed, while also improving cockpit position and range of motion around the frame. I'm also 5'9" with a 31" inseam. On that note, I have yet to find another set of 165s for my new bike, so I'm runnin the stock 175s for now, and it's tough. As for the other details, I'm running a 780mm handlebar (I prefer 720), a 50mm stem (Im thinking of trying out a 70mm), and I run my levers around the low 30s, high 20s, and I'm running cable actuated hydros (originally got them for my gasbike. they proved insufficient for that, so I'm gonna invest in XT four pot brakes). My tires are Continental TrailKing 2.4s in 27.5 (they work very well in the dry, dusty, throat scratching, eye burning, cough inducing clay-sand desert conditions inherent to the Boise area).

@justsayin3600 4 жыл бұрын

I haven't watch this video yet but I'm stoked to watch. I've been hoping to see this for months! Udate: I bought a new bike and for the past few months I've been trying to fine tune it. First few rides I'd get severe nerve pain in my forearm. I adjusted my levers and it stopped. Now I'm trying to figure out how to move back more. This was an awesome video! Yesterday I just figured out how to adjust the reach on my brakes. I'm going to watch this a few more times! THANKS!

@David_B777 4 жыл бұрын

Your timing is impeccable. Just picked up my first bike and rode 12 miles of single track. Safe to say my hands were cooked. Brakes were too (new pads incoming). I have some work to do and this will really help.

@rupedog 4 жыл бұрын

Such detailed, comprehensive, and clear info from The Prof 👏👏👏

@ewan_young 4 жыл бұрын

Nice polaroid on the shelf there !!

@HFVidShotz 4 жыл бұрын

I had riden my bike for years just how the LBS set it up. Figured they new what they were doing. Been watching GMBN and GMBN Tech for a while and recently rearranged my cockpit. It is so much better and I feel I have more control and comfort. Thanks to all you beautiful people!

@smoothisfast6644 4 жыл бұрын

Revgrips have been a game changer for me and arm pump.

@limburmin829 Жыл бұрын

Your tips & advise are the best. I totally agree with you from my personal experiences. 👍

@frankharradence732 Жыл бұрын

Excellent, thought provoking video. Only came across it today but very timely as i'm fine tuning the riding position of my new bike.

@jorstvondoom684 4 жыл бұрын

Cracking video. Very thorough. Nicely done!

@TheChepiriux 3 жыл бұрын

What a great video!! Its not your common do it like this video.... If you want to learn on how and why things work and try to figure out what works for you this is it!!! So thank you for this!

@olliefranks2341 4 жыл бұрын

For whatever reason whenever I do anything on my bike I always mess up something else 😂

@splitshot71 3 жыл бұрын

Ditto

@LaurentiusTriarius 10 ай бұрын

Take a little give a little, exactly like the laws of thermodynamics

@ricosuavez_uk 4 жыл бұрын

Great Video Henry!!! Love, Love, Love the Topics! 💣💣💣

@randexco 4 жыл бұрын

The information in this video is GOLD!

@deltanovember2296 4 жыл бұрын

Nice to see you have such a busy year planned out...

@jimbob5b200 4 жыл бұрын

Good points, I'm in a dilemma over my stem length but for me personally I might change my brake lever angle , Cheers!

@amoshagan7645 3 жыл бұрын

Many thanks for this excellent synopsis Sir ...

@doctorpc4x4 3 жыл бұрын

Interesting how you have your brake levers was how I always had my rear brake on my motorbikes including when I raced them. I had the same with others who rode my bikes most of then HATED the position

@wesellis4135 4 жыл бұрын

Is there much point in having a year planner up on the wall for 2020? 😂. Ps. Great vid

@mattkavanaugh5623 4 жыл бұрын

A completely blank year planner no less

@Peanutdenver 4 жыл бұрын

24th of May - eat a Gherkin/ Shout at squirrels to be quiet.

@thebrowns5337 4 жыл бұрын

You can, with a bit of common sense track the mess the gov are making... Wed 13th May- Johnson says some waffle that he knows many will interperate as the virus has gone and they can get back to work! Now, highlight two to three weeks ahead as the next spike in cases and, a few days after, cue Johnson blaming the public for getting it wrong. Repeat.

@davidcawthorne7115 6 ай бұрын

Fantastic simple explanation of everything. We need more if this.

@niklasmtb5113 4 жыл бұрын

great vid. Right on Time because im actually looking for a new cockpit

@MrNat916777 4 жыл бұрын

I was actually going to fiddle around with my cockpit on my new bike today... xD

@niklasmtb5113 4 жыл бұрын

@@MrNat916777 what bike you got?

@MrNat916777 4 жыл бұрын

@@niklasmtb5113 Spec. Fuse Comp

@niklasmtb5113 4 жыл бұрын

@@MrNat916777 nice bike my man

@vomErsten 4 жыл бұрын

I punched a tree today, which flipped the right brake lever to near vertical; I took the opportunity to adjust both brake levers to near-flat and find that it works a lot better than the steeper downward angle I had been using! 👍

@Uathankicks 3 жыл бұрын

That’s a good trick with centering the bars like that.

@abramtreadwell722 Жыл бұрын

Wow this is such a great video explaining this. Wish I had found it much sooner.

@joshsmtb2025 4 жыл бұрын

Helpful video thanks

@dirtdigglermtb8243 4 жыл бұрын

Cockpit setup is essential, I’ve shared Doddy’s video to many helping those with discomfort while riding to help them. Why do we state here if we roll the handle bars forward, our hands and wrists roll forward too? Our hands are not glued to the grips, we simply change the angle of the sweep changing the connecting angle between the wrist and elbow. If we roll the bars forward or backwards we simply re-grip with the same degree position the arms come from.

@zwiebelforscher123 4 жыл бұрын

Ooff. So many information! Thank you so much for that I did not get such a huge amount of information anywhere else yet. And every single sentence is is useful for finding my set up! Again - thank you very much and best wishes from Germany 👍🏻

@gmbntech 4 жыл бұрын

Great to hear! Glad you found it useful 🤘

@iestooo 4 жыл бұрын

22:00 'i feel like i've arm wrestled pat butcher by the end of it' lmao i had to rewind to make sure i heard that right

@jamespilar9840 3 жыл бұрын

Your right it's a work in progress.

@SoppenSin 4 жыл бұрын

Many good points!:) Trying to find the best setup for avoiding sore thumb joints, especially on the left hand🧐The joint closest to the hand. There's so many theories about why this gets sore and what to do about it, but I imagine the setup plays a huge part here. Anyone else had this happened and fixed it?

@ryanwood335 4 жыл бұрын

Hate to be that guy but I’m the mate on an oil tanker and she doesn’t want to stay straight! Takes constant input to keep her on course. Either way your example was understood and thank you for the great videos!

@dreadsanddirt5966 4 жыл бұрын

I set up my brakes the exact same way. I run the levers dialed in super close to the grip. It lets my first finger relax, and I get the as close to a full hand wrap as I can without going full death grip.

@mojo3398 4 жыл бұрын

i tried that today (before watching the video) and i had way less arm pump than usual. also i felt the brake was more predictable. on the other hand the pressure point didn't feel as sharp as i am used to.

@dreadsanddirt5966 4 жыл бұрын

I'm actually going to try the TRP 2.3mm rotors to get that initial bite a bit sharper. Shimano brakes are great but their pad contact adjustment is worthless :-D

@draftwood 3 жыл бұрын

A couple of wraps of Teflon tape under your control clamps allows them to rotate and not break during your crashes. I use milk carton plastic in the same way for my burlier enduro motorcycle controls.

@allocke9446 3 жыл бұрын

Good video!!!

@ilikerealflight 4 жыл бұрын

So in short, buy a bike shop, and spend a month in there going through every single handle bar, stem, and brake lever combination till you find one that works for you

@marcusoutdoors4999 3 жыл бұрын

I found 12 degree back sweep with 30mm rise on 780mm carbon bars were a revelation relative to the 9 degree 27mm bars as standard on my Levo

@Paltmonster 4 жыл бұрын

After 10 years away from mountainbiking i am just about to assemble my new ragley marley 2.0. Used to ride dirt bikes and the trend then was to cut your handlebars so that you could more easily spin your bars. I never cut my bars on any of my bikes and i tried to stay with the same bars on every bike, i used the truvativ hussefeldt bars then. The width of bars have increased since i rode a bike the hussefeldts was 680mm original and the bars on my new bike is 780. I have bad shoulders and i think i will have to shorten the bars to around 700 just to not strain my shoulders so much plus i am a sucker for wheelies and manuals and that will help move the weight back. But i will try for a while with the 780 and just see how it feels. Always felt that the wider bars feel more stable but you lose a lot of maneuverability with wider bars.

@bjornelfsberg3518 Жыл бұрын

❤️❤️❤️ Henry FTW ❤️❤️❤️ 🔥🔥🔥🔥 too

@donsmith2833 2 жыл бұрын

Speaking of straight and alligned....the calendar on the wall makes my eye twitch :)

@christhecyclist278 4 жыл бұрын

I have changed my cockpit on my XC bike from 90mm stem and 700 mm bar to 75mm stem and 740mm bar, much better

@Pillokun 4 жыл бұрын

The angle of the levers should be set up to match your wrist/forearm angle.. If you have the handlebars high up or you sit/placed very low then the levers should be in a neutral angle/position. If you are standing/siting up often ie far above the handlebars then the levers should be tilted down in the same angle as your arm to not strain your wrists. This is what I and many friends of mine has learnt by racing motorcycles. Imagine braking from 270km/h to 60kmh and all the loads goes to your arms and if your levers are mounted at a wrong angle your wrists/palms and arms will start to scream for help :P

@acameron87 4 жыл бұрын

You have to think about the position you’ll be riding in though. If you do this static you’ll end up with levers too pointed down. When riding in an aggressive position like on a steep downhill, your body is lower and further back and this is the position where you should line the levers with your forearms as this is when you’re likely to be holding on tight and doing the most aggressive braking. I moved mine up a few weeks ago and I actually can’t believe how much better I feel on even fairly tame trail riding as the short blasts of downhill are a lot less fatiguing

@Pillokun 4 жыл бұрын

@@acameron87 ofcourse, that is the premise of my post, you adapt the lever position to the position your body is at(your arms)

@acameron87 4 жыл бұрын

Pillokun yeah totally! Was just adding that as folk might interpret what you’re saying as measure the angle when they are stood up and not moving

@11beorn11 3 жыл бұрын

Can you do a feature on how to change separate clamps to combined lever/shifter setups sharing a clamp? Also regarding mixing manufacturers / systems? I use a br-m6000 brake and an eagle gx shifter and would like to clean up the cockpit by reducing the number of clamps. Also interested in similar options for all the remotes (seatpost, lockout)

@jensohlund1091 3 жыл бұрын

I first I was like, "Dude, you ride without gloves in the winter? In -25 C my hand would freeze off." Then I realized that winter is probably not the same where you live as where I live.

@pvaldovinos1 3 жыл бұрын

Greetings from Chile!

@dk.650 3 жыл бұрын

Doing a push with hands closer to you torso is much better. It develops strength and keeps everything tight.

@learnonedooneteachone3822 2 жыл бұрын

Keeping the bottom out point of the brake lever close the bars fights fatigue too

@bugboy152000 4 жыл бұрын

#GMBNTech gloves 100% of the time!

@mfren6253 4 жыл бұрын

Good timing on this vid. I’m trying to clean up my cockpit (emtb) and the geometry of my bike vs my body shape is likely a factor. I’m going to experiment with different angles. I want quick access to the dropper lever, brakes, shifter and the mode button(s). I’m getting a new dropper lever (Wolfe) this week. My hight is 5’9” but my arms are long (6’2’ span). Inseam is 32”. I find that I’m using the back of the seat as i ride uphill and my left index finger starts to cramp. Could dropping my stem hight a few mm help? Also adjusting the brake lever angle?

@robertmills6241 4 жыл бұрын

I set my brakes up the same way (biting close to the bar) and get the same reaction from people lol.

@not2sendy Жыл бұрын

Awesome vid what garmin mount is that??

@jasonduboise4548 3 жыл бұрын

Can you do a bit for dirt jumpers and slope style riders?

@dunin.majewski 3 жыл бұрын

which App was used to measure the brake angle at 15:11? Great video though, still learning something, love the content.

@nobodyshero200 3 жыл бұрын

Did you miss moving the spacers? I made my reach longer by dropping the stem. Then adding more rise on the bars to put them back at the same height.

@vedanttoke20 4 жыл бұрын

I dont know why such good videos get so less likes?😯😯

@kaltonian 3 жыл бұрын

Also the wider your bars are will help with your breathing, narrow bars restrict the expansion of your chest when breathing,

@tywitt3351 3 жыл бұрын

Around here the trees are not only on one side of the trail. Threading the needle comes to mind...

@robertbradley1133 4 жыл бұрын

The best setup is in the book “Dailed” by lee McCormack, he links the the centre of your hand grip in relation to the steerer tube axis, then subsequently the rise linked to an imaginary line from the bottom bracket as a angle from the floor. This defines the reach all according to your hight. This gives you the best centre of gravity compromise between seated and standing attack position. All his information is copyrighted so buy the book it’s not expensive and far cheaper than getting your bike fitted by someone who doesn’t know as much as you Edit, as Cornishcatus says in the like below, the very basic are on Pinkbike but that doesn’t really give you the full system. In the book it details the different RAD angles for various mtb disciplines XC DH Trail ect and not just the theoretical ideal from the Table illustrated but also the practical way to check because obviously real people aren’t average, they have different portions so you can continue to fine tune. It also defines the reasoning behind stem length, not the usual shorter the better, although 9 times out of ten it is. Remember ever part of the cockpit is inextricably linked, so if you change one dimension it will affect another

@cornishcactus 4 жыл бұрын

The basics are in this article he wrote. www.pinkbike.com/news/lee-mccormacks-guide-to-perfect-bike-set-up.html

@Speenard 4 жыл бұрын

My RAAD is at 59 degrees (which is what is recommended), but my RAD is about 50mm too long. I also have short arms, so I assume I'd want even shorter RAD, and I already have a 35mm length stem. Does this likely mean my frame is too large? Will moving a frame size down also decrease my RAAD and require higher rise handlebars/ spacer stack?

@robertbradley1133 4 жыл бұрын

Spencer hi do you mean it’s 50mm to long measuring up the RAAD line or horizontal reach? Did you try the pedals on stands and pull the bars up to you arms and shoulders down?

@Speenard 4 жыл бұрын

@@robertbradley1133 measuring up the RAD line. I'm about 194 cm tall * 4.47 = 867. My current RAD is somewhere between 910-920. Where can I find info on this pedals on the stands and pull bars into chest test?

@robertbradley1133 4 жыл бұрын

Spencer it’s in the book, that’s how you check after using the charts.

@rayred74 4 жыл бұрын

What mount do you use to mount your Computer to your top tube? Looks like it is stuck on

@eillord 4 жыл бұрын

Who won the crankbrother highline7 dropper post? Rooting to have one.

@rupedog 4 жыл бұрын

Never had a bar with the 'center' markings actually in the center! Always measure.

@ltrtg13 4 жыл бұрын

I don't know how to tell Henry. I left school so I wouldn't have to do anymore homework.

@iAmCarlton 3 жыл бұрын

Who the heck makes that top tube mount for the computer? Does it hold up?

@jamesc6876 3 жыл бұрын

Miss ya Henry. Hope you’re in bike heaven

@vedanttoke20 4 жыл бұрын

Henry please change your setup it has a lot of echo in the voice

@badlarry172 4 жыл бұрын

its cos he's in lockdown in his back kitchen or is it his bathroom ?

@davidpinnington213 4 жыл бұрын

Henry - hang a duvet or blanket on wall you are facing as a baffle to kill reverb!!!

@badlarry172 4 жыл бұрын

@@davidpinnington213 yeh that would do it

@christopherwestern9223 4 жыл бұрын

I missed some of his words cus of it. But i got most of it.

@thebrowns5337 4 жыл бұрын

Handlebar alignment...i saw a tool, made by Tune, that German engineering co. for lightweigth alu goodness...they have a laser site to replace or fit to the front plate of your stem! Fires a line onto your tyre. The odd thing was the user can calibrate (i.e. adjust) the laser. Seems a tool that looks to over engineer a problem but then make it worse than ususal by letting user error slip in. Interesting all the same.

@igormakhonin4193 3 жыл бұрын

Great content. I had no issues with the sound - hey people, stop winging about the echo

@VredesbyrdNoir 3 жыл бұрын

It's fine if you're listening with headphones in a quiet environment, not so great on public transport or on speakerphone.

@dido1803 4 жыл бұрын

Hi mate, thanks for great informations. I learned a lot.

@jonowee 4 жыл бұрын

Why do high-rise bars exists if you can take up the same hand position with a different stem with a flat bar of equal sweep? Is it stronger?

@oltislife4535 4 жыл бұрын

I would like to see a Video what everyone should do after a time in terms of mtb maintenance. I just ordered my first bike and i'm already planning on maintaining it 😅. I am very unsure what to do regularly.

@vomErsten 4 жыл бұрын

Wash your bike. Lube your chain every major ride. Grease the bearings every year. Wash your bike. Keep the suspension and dropper seals lubricated, every other wash will do. Wash your bike. Service the suspension and dropper after a year or so of use. Wash. Your. Bike.

@oltislife4535 4 жыл бұрын

@@vomErsten thx men 😄. Do you know a good video how to service the dropper?

@WhiteMFingRabbit 4 жыл бұрын

That mic on the shirt is not recording :)

@simonrogerson2106 4 жыл бұрын

Any suggestions on saddle positions which could affect the body etc. ?? Cheers

@justsayin3600 4 жыл бұрын

For me, I had a stock Giant Contact seat. It was so uncomfortable that I couldn't find the right position for anything. I just got an Ergon SM Sport saddle and set it up basically like the stock one. Today I rode and not only was it comfortable but no matter where I'm placed on the saddle it's comfortable. It rides like a different bike. I wouldn't have thought that a good seat could make such a huge difference.

@hedemalmcarl 4 жыл бұрын

reference for bar width: Flow: You wanna ride wider bars for control and stability when flying Tech: A bit narrower for tighter movements Rise and backsweep? Somewhere to start is 15 - 20mm rise and 9 degrees backsweep, and from there you can find your preferences, most people like me stay on that, some find other opinions

@benread2422 4 жыл бұрын

Like the prof Brian Cox of mountain biking

@paulgreen2416 2 жыл бұрын

Direct mount stem on triple clamp forks fixes issue 1.

@CsBencefy 4 жыл бұрын

Nice and very informative video, I learned a lot, but please try to fix your microphone.

@charlesholmes834 3 жыл бұрын

What is the best way to increase the length of the steer tube, in order increase the height (reach) of the handlebars for better riding position?

@grahamsmith9788 3 жыл бұрын

get a riser stem, e.g. Acor do a range of 25 degree stems, other brands go even steeper

@stuartmclean3843 11 ай бұрын

Ive got a 120mm rd stem on my mtb, i dnt ride trails only forrest fire rds

@andersweinemo 4 жыл бұрын

Not much planned this year, Henry?

@BrunoSilva-ki5sx 4 жыл бұрын

#AskGMBNTech how do I see which is the best cockpit setup for me, without spending to much money?

@paulsack9563 4 жыл бұрын

Hello echo!

@robertstanford9898 2 жыл бұрын

Him talking about how 160 mil rotors may not have enough bite, yet my bikes so cheap it still has rim brakes 😂

@krzysiu4003 4 жыл бұрын

That 2020 year planner is looking very empty :(

@churnstyle 4 жыл бұрын

That actually made me laugh out loud, til I remembered the Kung Flu, now I'm just depressed again

@rupedog 4 жыл бұрын

All the green lines are lockdown weeks!

@hjalteholdgaard3814 4 жыл бұрын

flater levers are the answers

@joshwright6834 4 жыл бұрын

Please please can you sort your acoustics out, I do love your videos, getting rid of the eco

@simonrogerson2106 4 жыл бұрын

Hey KZfaq people I wonder if you can help me out? I have a Scott Genius 960 (2019) my dropper remote is damaged and is part of the twinlock set up. Can I get just the dropper lever or do i need to buy the whole thing? 🙏

@knutlyd 4 жыл бұрын

You have a mic, so why not connect it.?

@irviagung1173 4 жыл бұрын

How to do barspin setup for enduro bikes? I saw 50to01, yeti riders and some freeriders do barspin with those bikes? Need some answer 🤙🏾🌲

@tommycooperfish 4 жыл бұрын

Drilling through the centre of the star nut is the place to start... Sketchy shit to be fair but people do it.

@geemail369 4 жыл бұрын

There's various types of top caps now _(just google "barspin" + "top cap")_ no need to hack stuff apart. You'll need to re-do you shifting cable/s though.

@tomwagemans1872 4 жыл бұрын

Where is the time I even cut my straight bar as short as possible and then even fitting barends? How I controlled my bike like that is still a mystery.

@marcuspeduzzi6617 4 жыл бұрын

#askgmbn Henry, a question a bit off from this topic. What mount are you using for your Garmin to keep it on the top tube?

@jonathanzappala 4 жыл бұрын

Marcus Peduzzi 76 projects

@surfinwaves4769 3 жыл бұрын

I think Henry’s gone (?) but hoping someone can point me in right direction... have just changed from 12 yr old bike with very narrow bars 58cm on S frame to new setup and larger frame M with 75cm bars. Overall feels like right move except for mega pain and almost RSI in both thumbs but especially shifter thumb. Haven’t been able to ride for days ‘coz of pain and weakness. Q: where do I start with fixing this? Shorten bars? Increase back sweep? Move controls further inward? Or is it that Ive gone from SLX shifter to Deore which feels really stiff and hard to shift. Hand and thumb fatigue both hands byr mostly right/ Any pointers?

@tommycooperfish 4 жыл бұрын

30 degree brake levers for the last ten year-ish, really helps on steeps, also helps with climbing as you already sort of have the tucked down elbow position. Clinometer is a great free app for android/ios for angle finding (good for saddle pitch too)

@CarkeekW 4 жыл бұрын

Im on 40 , i straighten my fingers , make em flat with the top of my fore arm and have levers just touching my fingers. Max leverage for tendons.