How to fit a Half Mask to stop leakage

Рет қаралды 21,265

7 жыл бұрын

Roger Bisby gets a lesson from Matthew Judson, on how to fit a JSP Force 8 Mask for maximum protection.
The Force 8 twin cartridge half mask with Typhoon valve offers low breathing resistance and a 4-point suspension harness with quick release buckles. The mask is made with a durable thermoplastic rubber offering a superior fit to most face shapes. The mask accepts the full range of low profile Force™ 8 filters giving the Force™ 8 the flexibility to be used for many applications, providing filtering protection against particulates, many gases and vapours.
The mask is made with a durable thermoplastic rubber offering a superior fit to most face shapes. The mask accepts the full range of low profile Force8 filters giving the Force8 the flexibility to be used for many applications, providing filtering protection against particulates, many gases and vapours.
Comfort
Durable thermoplastic rubber mask for superior fit to most face shapes.
Harness
Fully adjustable 4-point cradle suspension ensuring an effective facial fit.
CR2™ Reflectivity
Reflective strips create increased visibility in low-light environments for added safety.
Typhoon™ Exhalation Valve
Low resistance exhalation valve for easy breathing, with stable mask configuration.
Force™ Filters
Cost effective Force™ 8 filters available with low profile angle for minimum visual impairment.
Conformity
Conforms to EN140 (Face piece), EN14387:2004 (Filter performance), EN143:200 (Filter performance)
Find out more about JSP's products at www.jsp.co.uk.
===================================================
Don't forget to stay up to date with Skill Builder!
Join our mailing list - skill-builder.uk/join
Visit our website - skill-builder.uk
See our Tweets - / skillbuilderuk
See our Facebook Page - / skillbuilderchannel
See our Pins - / skillbuilder1

Пікірлер: 45

@andrewmayes3271 6 жыл бұрын

I have this mask and can say It is worth the money 10 times over used it where chasing out for electrical points since using it once would never use without again

@nikfrengo3983 6 жыл бұрын

Same here. Bought one after seeing your video. Fantastic mask. Thank you Roger and all the guys behind Skill Builder. Keep up the good work.

@SkillBuilder 6 жыл бұрын

Thanks Nik. Nice comment

@woodey12 7 жыл бұрын

Great masks. Easy to clean and change the filter.

@zedman442 7 жыл бұрын

I actually bought one of these after your recommendation Roger and would never go back to those rubbish disposable one. Great mask.

@SkillBuilder 7 жыл бұрын

Thanks Zed. I feel the same way. I just wish I'd done it years ago.

@TheWorkmonkey1 2 жыл бұрын

great vid, just bought one

@orsonincharge4879 4 жыл бұрын

great info

@Jammydodgers41 2 жыл бұрын

Definitely worth buying. Dust is no joke, especially with silica/asbestos. Check to see if you have the right filters.

@monjer2004able 3 жыл бұрын

This really fantastic. I am an ICU NURSE, and i am comfi to use than the FFP mask the hospital provided.

@denisodariuc6591 4 жыл бұрын

Liked the builder guy

@toogreytogame 2 жыл бұрын

Great video. It answered all the questions I had. I have a beard, so can't get a perfect fit. Unless anyone has any suggestions...trying to build up the courage to shave it off for the first time in 15 years.

@MrZOMBIE170 7 жыл бұрын

i no when a channel is good when they think Neil McKinlay in fun great channel roger

@annonomowz4903 4 жыл бұрын

COVID-19 crew represent!

@orsonincharge4879 4 жыл бұрын

mines on its way , gona hide until then

@MegaFunnyman86 4 жыл бұрын

@@orsonincharge4879 stop buying up tradesman mask we need them to work why you lot are hiding under your beds😂

@ImpartiallySpeaking 3 жыл бұрын

Which safety goggles fit around the mouthpiece?

@zerostalkertolerance 4 жыл бұрын

PLEASE DO A HOW TO CLEANING VIDEO

@Bananovskyyy 2 жыл бұрын

what if you get a size that's larger than what you should get? Adjusting it tighter to "squish" it should really fix the problem, contrary to having your mask too small?

@TheWelshWorkshop 7 жыл бұрын

Great video, am looking to get one of these masks. Where can I get my face measured for a good fit?

@SkillBuilder 7 жыл бұрын

Thanks TheWeshWorkshop. If you contact JSP uksales@jsp.co.uk they will be able to advise you.

@Captain_MonsterFart 4 жыл бұрын

Christ I hope the corona virus doesn't get so bad that we have to wear these for extended periods. Not so pleasant. Anyway thank you, I realize I have been wearing my mask wrong for a long time. Hopefully now it won't cut into the bridge of my nose as bad.

@SkillBuilder 4 жыл бұрын

The coronavirus will get that bad and within 3 months we will all be wearing whatever masks we can get hold of. I recommend the Stealth from Trend because it looks like the kind of thing cycle couriers wear and is not so alarming. If you want one get it now because the Chinese have been buying back the masks they have sold to the West. Containers loaded and ready for shipping have been turned around for domestic use.

@ImpartiallySpeaking 3 жыл бұрын

Thanks for sharing. Ate the P3 filters which come with this mask effective for protecting against viruses such as COVID-19?

@SkillBuilder 3 жыл бұрын

We cannot give you advice on any aspect of Covid. Please contact the manufacturers website.

@ImpartiallySpeaking 3 жыл бұрын

Hahahaha why would they bother! Londoners clearly have no interest in health advice!

@davidprior2638 18 күн бұрын

Still don’t understand how it works ..

@steve1988small 5 жыл бұрын

Would this mask help with pollution whilst riding a motorcycle?

@DannyTillotson 4 жыл бұрын

It would but might be difficult to wear under a helmet. Even with a flip up helmet I think the filters could stick out too far at the sides and still not fit.

@GhostofRazors 7 жыл бұрын

Immortan Joe would approve.

@teklusahle2743 4 жыл бұрын

This mask is good buy when I take it off I see red marks on my face

@SkillBuilder 4 жыл бұрын

Too tight

@georgechancellor2664 7 жыл бұрын

Know the owner of jsp

@Zhen-Lin-CHN 7 жыл бұрын

Old soldiers never die , get the ****ing mask out of my face XDDDDDD

@leopard3c 7 жыл бұрын

Sadly an employee with a beard doesn't mention what his company is recommenting for their masks. I'm using 3M and they recomment you to be shaved.

@SkillBuilder 7 жыл бұрын

One of those things. He did tell me they recommend a clean shaven face but I said you have to be realistic. The thing about Press to Fit is that it will highlight any leaks. I am assuming some beards are more dense but if it fails to work you will know about it.

@lunahula 7 жыл бұрын

Remember if the seals do go, you can always filter air through your beard too. ;)

@02markcal 7 жыл бұрын

Everyone's a comedian or think they are, but protecting your lungs aren't joke material IMHO.

@SkillBuilder 7 жыл бұрын

02markal I believe that there are very few situations which are beyond humour. Often it helps to make things more accessible and what are you going to do, ban laughter? Pol Pot did that. People were taken out and beaten to death for smiling at each other. Good plan.

@02markcal 7 жыл бұрын

I agree with your statement, but feel there is a time and place that are more appropriate than others. Without humor the world would suffer greatly, so we agree.