How To Fix a Woofer With Voice Coil Rub

Рет қаралды 5,637

4 ай бұрын

So you just replaced the foam surrounds on your woofer and you hook it up and hear that awful scraping sound. That sound is the inside of your voice coil rubbing on the magnet pole. If you already have let the glue fully cure this can only mean one thing, you have to cut it out and re order another set of foams. In some cases not all of them you can fix the problem without spending a dime. I take this botched re-coned woofer and make it sound great again.

Пікірлер: 41

@genehammond7239 4 ай бұрын

Keep em coming , nice work !!!👍👍

@robertholsopple9451 4 ай бұрын

Glad your making videos again.

@SavingVegas 4 ай бұрын

Thanks! I am too. The time sure flew by but it felt good to get some more content out there.

@ronbradshaw7404 4 ай бұрын

Good!. I want to see you re-foam your Sound Dynamics with Yellow foams! :)

@zew-ski8713 4 ай бұрын

Ya let’s see the full clean up and re coning of the next woofer

@mikebrookshire3464 4 ай бұрын

That's a great idea, does anyone know how I can contact saving vegas as I have an idea that would help me and maybe make him some money. Looking forward to seeing the full rebuild. Good day.😊

@SavingVegas 4 ай бұрын

Hey there, you can E-mail me at savingcerwinvega@gmail.com.

@PoppinWheeliez 4 ай бұрын

Was hoping for a new vid. Good save. Nobody is perfect. I always center the voice coil with a battery or my bench power supply when laying down the inside with normal polarity (out) and when setting the outside reverse polarity(in). I dont use clamps. I baby sit them until set. As soon as they set I start play music at low low volume overnight. I finished my at12s. They are loud. Good for blues music. They don't compete with my ns-690's or my ess speakers, but they do what they do very well. I sort of like them for live recordings. I found the surrounds needed a couple days to work themselves to maximum potential. I actually ran them for 48 hours straight at medium low volume. The difference was night and day after breaking them in.

@SavingVegas 4 ай бұрын

The Yamaha NS-690's are great speakers. I had a set of the tri amp versions for a little while but sold them just because I got a hard to turn down offer for them.

@cptnoblivion 4 ай бұрын

Also cerwin Vega speakers are definitely efficient and do not need 400 watts of power the problem is the larger drivers are 4 ohm speakers that dip below that which does present an issue with low power amps that weren’t designed for it,

@BarryBuchinski-ep2op 4 ай бұрын

You are amazing. Barry Buchinskj

@SavingVegas 4 ай бұрын

I don't know about amazing but thank you! Always good to know when people enjoy the video.

@buffdaddyinga 2 ай бұрын

Hello, great video!. I was given a pair of CV R123 speakers that I had started to rebuild the crossovers on only to discover that the woofers had been replaced with Radio Shack woofers at some point. I'd like to restore them back to factory specs, but finding 122w4 or 122s4 woofers in any condition is proving next to impossible. I'd appreciate it if you could offer some suggestions on either where to get hold of the original woofers, any condition, or other 12" CV woofers that would work as replacements. Thanks!!

@SavingVegas 2 ай бұрын

The RadioShack replacement woofers are pretty common to find in the older CV speakers it seems. A low cost replacement woofer seems like the best option for people who are unaware that replacing the foam surrounds is fairly cheap and easy to do. The reason that lots of the factory woofers have been tossed in the trash unfortunately. Your not wrong, finding somr 122S4 or 122W4 woofers may not be easy but they do pop up every once in a while. Both of which can be reconed as the proper 122S4 4 ohm woofer. If you ever do come across a set and they need to be reconed Brew City Audio LLC is the place to get the proper kit. Unfortunately I can't help you much on where to find some other then always checking Ebay and any other places for a pair to come up. Good luck I hope you end up getting some and get them rocking again.

@kevincrile9056 4 ай бұрын

Great channel! I picked up a set of DX7 last week, so I’m new at fixing audio stuff. These speakers haven’t had the best life hope to get them going. Tweeters and 12s work, but neither one of the 6 inch mids work. They look good shape and both stroke with a 9v. Would both crossovers be bad on the mids? Common with DX series?. Looking forward to watching old videos and learning about these speaker systems. Thank you for your work.

@SavingVegas 4 ай бұрын

The crossover is most likely the culprit. If they were abused and had gobs of power thrown at them for extended periods of time it is possible it could have overheated a component in the xover causing loss of signal to the mids.

@itchyomalley 4 ай бұрын

Just refoamed a pair of 10s in an RE25 set. I got the foams from Santon audio in Toronto. I didn't shim, but it seemed to work great until the gasket ring went back on and the oversized curl on the foams was pushed by the ring on the top so I get a tad of buzz when I really push them. Is there a foam with a smaller curl to avoid contact with the gasket? TIA! Great channel!!!!

@SavingVegas 4 ай бұрын

Problem with the products from most places is they are made to be a one size fits all. Which in most cases isn't a problem but CV made many changes along the way and weren't very consistent. Brew City Audio has excellent products specializing in Cerwin Vega foam kits, recone kits and more. He sells on Ebay and customer service is by far the best as well as his products. Just look up Brew City Audio in sellers on Ebay. It's the only place I get my parts from.

@BarryBuchinski-ep2op 4 ай бұрын

Hi. If I'm not mistaken, aren't those speakers behind you in your latest video actual 211s? I can tell with the speaker grilles. On the 211s the speaker grilles never covered the ful! front of the speaker cabinet. Please let me know. Thanks. Barry B.

@SavingVegas 4 ай бұрын

Those are R24's

@realbeetlejuice 4 ай бұрын

best kit to repair foam on AT-8's? is stuff on amazon good?

@cptnoblivion 4 ай бұрын

You need to look into the new LA series

@SavingVegas 4 ай бұрын

I've been eyeballing them since they were released. Sounds like they are getting good reviews for the most part given their price range.

@JR-ho5qm 4 ай бұрын

@@SavingVegasthey will be releasing the LSD series next. But it’s still a narrow baffle design. We all need to get on them to make a modern big woofer 3 way.

@SavingVegas 4 ай бұрын

I have a feeling they never will but you never know 🤞

@nicholasrodriguez2739 4 ай бұрын

I got a 15 Vega basket how much to get repaired?

@CH3_Productions 4 ай бұрын

I think I need to try this on a set of Re-25 that I picked up today. My questions is the cabinet says they are 6 ohm but I checked the woofers and they measured at 4. Speaker Exchange has a 4 ohm and an 8 ohm recone kit if the voice coil looks damaged but I don’t know which I should buy

@SavingVegas 4 ай бұрын

The 6 ohm rating is for the entire speaker and it is an impedance rating. The impedance changes depending on the frequency that's being played through them so think of the 6 ohm rating as kinda like an average over the 20-20,000Hz frequency spectrum. If the coil is damaged on the one you can use your multi meter to check the resistance of the other working woofer (woofer only). If the meter reads around 3-4 ohms it's generally a 4 ohm and if it's higher let's say around 6-7 ohms then it's an 8 ohm.

@CH3_Productions 4 ай бұрын

Awesome. Thanks for the help. I enjoy watching your videos

@SavingVegas 4 ай бұрын

You welcome, always here to help when I can. I'm glad you enjoy the videos, lots more to come yet!

@Ruben036pr 4 ай бұрын

Hello I have Cerwin Vegas VS-150 since come out. Now I wonder if you recommend get a replacement speaker or it is recommended to recondition. I don’t know how.

@SavingVegas 4 ай бұрын

The most common part to degrade first is the foam surrounds used on the woofer. There are no new VSW-15 woofers available to purchase anymore and I highly recommend getting the foam replaced before trying to replace with a different woofer. The passive crossovers are designed specifically for the original woofer, midrange and tweeter so using a different woofer can cause all sorts of different issues. If you feel replacing the foam surrounds is beyond your capabilities I recommend finding a professional to have it done for you.

@Ruben036pr 4 ай бұрын

@@SavingVegas Where you located. Thank you very much.

@SavingVegas 4 ай бұрын

I'm in Saskatchewan, Canada

@Ruben036pr 4 ай бұрын

@@SavingVegas Very nice video, am from Boston. I appreciated thank you very much.

@Ruben036pr 4 ай бұрын

@@SavingVegas do you have a pair that I can buy it from you.

@mikeherrmann5360 4 ай бұрын

I hahave a set of HEAD speakers that look just like those 211s. 15in they are 15in vegas. I'm afraid to use them because my amp is 8-16ohm & the speakers are 4ohm. Will I trash the speakers??

@SavingVegas 4 ай бұрын

When running a 4 ohm speaker on an amp that's only rated as low as 8 ohms you are more likely to damage the amp not the speakers. Lots of people still do it but you have to make sure you keep a close eye on the amp as because those speakers may cause the amp to run hot. Some newer amplifiers will have a protection circuit that will shut the amp down before any damage can happen.

@joshholden8561 4 ай бұрын

Ur amp will be fine u will have plenty of impedance rise to be at a safe ohm load for ur amp.

@PatFitzpatrick78 4 ай бұрын

Good to see a new video , nice work . Watching your videos gave me the confidence to refoam my set of RE20’s I got at a thrift store for 40.00 🤟 small yes But I saved them and the are living their best life now

@SavingVegas 4 ай бұрын

Awesome! Glad the refoam job was successful, enjoy those great little speakers.