this is an awesome video! i like that you make it with a worn car so you can show what a real job would be like. its not all clean and you show the difficulties that can come from a normal use of a car

I like this video. Thank you for getting to the point and not being a goober who talks for 20 minutes about everything else in the world before actually getting to the fix.

it is refreshing to see a mechanic that knows what he is doing. Thanks for sharing. hope others take this information seriously.

Oh my God, I love you! My car is having exact same problem 2008 Chevy Impala LT! I was too scared to drive it, didn't know what was wrong but now I do thanks to you! I remember I got my brakes fixed 3 weeks ago and the dealership did tell me that my wheel bearing may be going bad. Thank you so much for sharing, I'm not going to start following you from now on!

Well made video and props for using a torque wrench!

Wow, you're really good at this, respect

Very educational, feel like I can take on this on my own. However it’s going to be a very uncomfortable job working on the floor with jack stands.

I love your channel man!!🔧🔧

Great instruction vid and exactly what I needed to know. Thanks

Thank you soo much for the video. Just solved my problem saving me lots of money. I at least now knew what i was looking for so i luckily had an abs scan tool and told me which wheel was defective

He makes it looks so easy! Excellent work!

gotta check out your backlog on vids here on YT. very useful stuff man

Man this light is so annoying i got this on my 2008 Yukon Xl 1500 glad i came across this thx bro I'm fixing this problem tomorrow i subscribed too 👌🏿👍🏿👍🏿

Thanks for the excellent demonstration.

Great job with the video. The bearing looked rough just from how I see you spin it. Keep up the good work.

Great video... I have to do the same thing to my 2008 equinox... so what do I torque the axel nut down to ??? Thanks

Nice job. i like the fact you talk about the minor info like bolt/socket size, and lack of room for power tools. a little surprised you didn't pull caliper, rotor and the axle first before you undid the bearing hub assembly. but i guess it dosen't matter. overall good video.

Well done on this video brother!!

this is what separates the amateurs from the PROs!!!

Thanks for the video, it's always nice to see it first before you attack it on a new application.

Looks like another day in the shop good vid!

oh yeah, you're THE MAN! - as always hehe

I love to watch these car videos about mods and stuff, don't ask me why, I'm not exactly good at it myself, but I'm learning! :-))

when my light comes on I can actually hear a rough sound would that be normal if nothing is actually wrong and its just the wheel bearing?

cool!! exactly what I was looking for, what a coincidence!! thanks a lot bro

That rubber grommet that you kept mentioning is to keep the speed sensor wires from chafing, then shorting, then ultimately breaking.

Awesome Job, Thank you so very much, awesome video, keep up the Great work!

awesome! he got it figured out!

Great video. Very informative

wow, that's ingenious!

Great video. Thank you.

Thanks for the detailed video...but I inadvertently knocked a wire out of the harness changing the rear shocks ..

Excellent v-clip; directly to the point !!! Q: would you recommend to change the opposite side bearing too? Q: can I put dielectric grease into the connector to prevent rusting ?

awesome video. good job! learn lots of thingd

THANK YOU, SIR!

Nice video!

Thank you so much! Amazing video!

Sir you make it look easy, can't wait to track down my ABS, stabilitrack error on the 07 Tahoe, doesn't misfire, doesn't shift hard, but I'm thinking brakes were just slapped in quick and they probably hurt a ABS or speed sensor. Tomorrow the ODB2 will tell me.

like a glove 👍

Awesome video... Replaced my sensors easily .. well as easy as allowed.

GREAT VIDEO. GREAT COMMENTARY! WILL RECOMEND TO EVERYONE WHO WORKS ON THEIR OWN CARS. i replaced the left front wheel hub and stabilitrak is still on. is there something i have to reset?

So I have a 2008 Saturn aura once in a while my brake lights stay on and once in a while the service traction comes on and sometimes my brake lights and such work fine but the top brake light don't work when the top light works and all the brake lights work they all stay on it's weird I'mso confused about whats wrong with this car Any ideas what it could be

Do a bad bearing also cause your breaks to lock when in stabilititrak service mode? I have a 2010 equinox and it does that a lot now when driving for at least 30 mins to an hour

dat daam lites goin' off mane sweet

I had this exact problem on my 2007 Chevy Equinox. My ABS module was fried, so it took my mechanic about 7 weeks to diagnose and fix my problem. He replaced the ABS module, then replaced the left front wheel bearing hub assembly. Then, the ABS light came back on, so he replaced the right rear wheel bearing hub assembly. He cleaned my right front and left rear wheel bearing hubs with brake cleaner. Hopefully, they won't have to be replaced. So far, I've spent almost $600 on repairs.

I have a 2014 ford fusion. I parked it today came back hour later and started car. Has abs light service traction control airbag light hill assist error lights all on. Had both auto one and advance check for codes. Both found none. Advanced confirmed their odb tool checks abs but nothing. Any ideas

I like your job

I have a intermittent problem with those lights which limits 4 wheel drive on my 2010 GMC Sierra 1500 you shut it off and it goes away than you are good to go for abit and it comes back on not sure if it's a speed sensor or the SAS sensor on the steering column ?

Just fixed both my amber lights . abs and traction control on my dash. in my code diagnosis it showed front left wheel speed sensor on my 2004 esv escallade. I had replaced both front hubs with new sensors included. That is when my dash light showed abs and traction control. So I knew old sensors were ok. I had no problems with old hubs either just waned to update my front end. No need to take off calipers from disc just have a bucket to set disc and entire brake assembly still mounted to disc. No need to take out hub or big wheel nut . just unscrew Allen wrench nut off of wheel speed sensor . when unplugging sensor be sure new one gets plugged all the way back in before tightening the Allen screw .I used dielectric grease and used my old sensor, as new sensor was throwing the code. This is for front end. 2004 esv 6.0 escallade. Wheel speed sensor.

I had this problem on my 2005 Chevy Uplander except that the code was for the LF speed sensor circuit C0035. I replaced the hub and wire harness , cleared the codes and it still comes on as soon as I start the van before i even move. Any suggestions?

What scanner are you using? Can you scan and codes with a Actron 9680?

Hi, I have a 2010 Chevy Colbolt and I rode over a puddle of water & my ABS light came on along with my traction sensor reading back to me saying it was off, sync tire monitor is reading back to also, any suggestions on what it could be?

thanks for such a helpful video

I love how everything is going terribly right for this guy 😂😂 "get your sweater off because this is gonna be difficult, whack, and that's out"

I'm having this same issue I have a 2014 impala. Was told it was the hub bearing assembly, paid 350 to get the work done. Wasn't even out of the parking lot the traction light was coming back on. What do you think it could be now? Please help

I changed my hub bearing on a 2013 equinox. And after i did that. My stablitrak light and a couple other lights come on now. Any suggestions of what it could be. I know for a fact the wires aren't pinched or anything. Do you think the computer might need reset?

I have a Buick Enclave doing it but it’s the driving side front wheel doing it

I have a 2008 Cadillac srx and the ABS, traction control, and Stabilitrak lights on when its wet but it does not come on when dry roads. Any suggestions?

0:33 "So I'm going to show you how to take care of this." 2 seconds later he's standing in front of his own private $90,000 hydraulic car lift hahahahhahahha.

Excellent Job👍👍👍👍👍👍👍

great video.

I just bought a 2007 Saturn Aura that needs the front right hub replaced. What is a fair price for a shop to replace it? The previous owner just got a quote from a chain car repair shop for about $700 bucks.

Thank you. I'll try this repair on my '05 Tahoe.

hi sr, I was wondering what kind of scan did you use to figure that problem out

MY VW POLO 9N when I pump brakes hard boom come the EPC LIGHT AND TRACTION CONTROL LIGHT on the screen at the car come on limpo mode what is the problem?

How would i know which tires had that problem because when i turn suv goes on 2 min all thos abs lights turn on traction control and stablink turn ok make funny nose from front tired buying parts

Thanks for a very helpful video. How did you determine it was the wheel sensor rather than a corroded connector where the sensor wire plugs into the rear wiring harness?

good job.

Thank you for the video. I'm having a "Service StabiliTrak" everytime I start my 2010 Camaro V6. No problem while driving but I think it might be the ABS sensor. What do you think about the issue ? Can I apply the same directives you give in this video ? Thank you

Hi i live in montreal no garage can fix my cadilac a got the stabilitrak traction control go in when i drive and lost power

I had this in my Suburban and came out nice. How would you know of this, may ask well you will feel as if you were stepping on the brakes on ice lol . When you come to a light and brake it seems it act as in ice , extra push on brake peddle. like the anti-lock goes on. SENSORS either dirty or need replacement :) good darn video.

I had my brakes changed a while ago on a 2011 Cadillac CTS. I have loss of traction and jumping RPMs when I try to go up hills or accelerate. The ODM reading doesn’t show me there is a code throwing. I use the FIXD app, it’s saying everything is fine but I noticed that the traction is not fine, and feels unsafe to drive. Why wouldn’t the ODM show me a code?

I uses my old cable on a new hub and all lights went away..im very happy now

we have a different issue mr tire replaced the front hub and now the light is on. It was not before they replaced it. we have driven the vehicle over 100miles still on either they bs me or broke it

I have a 2004 Chevrolet SSR, then had 100,000 miles. 10 years ago. The ABS & Traction control I first had trouble codes for everything. Engine, Exhaust failure, Brakes, Transmission etc. I asked on the SSR fanatics & took to Chevrolet Dealer. No help from either because? Not one mechanic had seen or worked on the SSR in Toledo Area. Most SSRs from 2004 to 2006 around 24,178 were built. Nobody had a problem because you have to drive a car for parts to wear out. Confused why Trailblazer did not have issues? I had several helpful mechanics resolve the problem. Well I tried the sensors on wheels. Found several had failed. So I replaced all disc brake pads, Rotors & calipers that were worn need replacement. I took my SSR to a car show & found a local expert looking at my SSR. He told me how to fix ABS, Traction Control, Heater motor, Over heating of engine etc. He told me that some engineer designed the Trailblazer Chassis with the ABS Traction control right next to the Catalytic converter. The heat soak in traffic & after parked. OR? The engine in 04 is creating lots more power than catalytic converter was made for. The heat would conduction & radiation to the ABS Traction control. The failure is inside the module. The solder on circuit board melts. Wires can too. I found a replacement on ebay. Lots of work under truck using torx socket to remove the module. It was burned. I also found that the ground was bad for the ABS Traction control. So I ran another ground.

What about when you replaced this, and then a stability link bar and still have these lights ??? Still have all the shake in the steering wheel.

What if the scan tool says a ecu error but the abs and track control light are on?

Wouldn’t you want to check the ABS harness for a broken wire before changing the bearing ?

I think i may have this issue going on as of today on my 2006 ford freestyle FWD. Abs light and traction control light came on during my drive home. In turn the transmission shifting was acting funky. Did some troubleshooting of my own.(i am not a mechanic but mechanically inclined with good instincts). Nothing i did got the the warning lights to go off. I don't have a fancy computer to plug into it just a $40 O'Reilly special. So no codes for the abs sensor or anything like that came up. Does anybody have any thoughts on this matter?

What was the torque wrench set at

Thanks m!!!

What scan tool were you using? I have the same issue on my 2009 traverse and my scanner wont pull any codes

Will it throw a code even if the check engine light is off?

wouldn't you also inspect the clips and wires prior to replacing the sensor/hub?

Was this problem also causing g the truck to not shift out of park? I have a 09 yukon denali and the service traction control light is on as well as the abs light and it wasn't wanting to shift out of park. I replaced the brake light switch and the lights are still in? Any suggestions

You don’t realize how much you have just help me i have a 2011 Chevy impala LT I’m having the same problem with my car. And also need a new starter and battery 🔋 wish u was in the Philadelphia.

So... I have a 2012 Cadillac cts, but with the awd GM 3.6L code shows rear speed sensor. Bought one for $20 but while I'm in there, I'm thinking of changing hub and might as well do brakes and rotors as well. Pretty much same technique I assume.... except mine has sensor by itself🤔

How you know witch side has the bad wheel sensor on if you don’t have a scan tool

I noticed in the beginning your temp gauge is showing a weird reading. My '07 Equinox does the same thing. What is the cause of that?

@ts6034 great video man. I just bought an 07 1500 and when I “re-learned” the tire pressures, I discovered there aren’t any TPMS sensors and my light is always on. Would this cause an issue with my service stabilitrak light? Funny too it idles like hell and throws a o2 code every now and then? Idk how a bad part would be okay one day and not the next lol. Hoping it won’t become a lemon!!

The front passenger side abs speed sensor is failing in my 06 grand prix AGAIN. I've had the whole hub assembly replaced multiple times. Is this just common?? Any suggestions/advice??

How did you test the part to ascertain it was defective? I wouldn't want to dump a hundred bucks into something I didn't need.

My 08 CTS was doing the samething only the brake light was on along with all the other lights..it'll go off and come back on..sometimes it stays off for awhile then comes back but then goes away again..you think it's the same problem?

well, "easy" is relative... you certainly make it look easy :-)

Interesting

Is it better to drive with traction and stabillitrac off all the time will this prolong the life of both systems or is it better for it to be allways on

Currently having thus issue. Wish i could bring my car to you

Would anyone happen to know if these two lights commonly turn on after getting some collision damage fixed? The lights were *not* on before I got the work done. Just got the car back today and both ABS and T/C lights are on.

Will this cause your brake to jerk when you are stopping

Where can I get the ABS codes read? I have a ODBII reader but does not do ABS. Also, I noticed my light and message came on after "curbing" the back right tire on a turn. I would like to confirm with ABS code reader.