How to fix DJi Motor OVERLOAD error on DJi Mavic Pro from Start to Finish
Рет қаралды 134,833
6 жыл бұрынDo you have Mavic pro gimbal error problem ?
Do you have Motor overload on your Mavic PRO?
This video is here to help you replace ribbon cable on you Mavic Pro with can help you FIX you Motor overload gimbal problem
Instruction how to reassembly DJi Mavic PRO Gimbal Will probably help you Fix This motor overload problem on your Mavic Pro
Motor overload error on app can be fixed if you will change flex cable on your gimbal
This gimbal ribbon cable is so sensitive and small damage get bring this overload error
Ribbon cable damage can be from crash small or big one or I see damaged flex from transporting your Mavic pro without gimbal plastic holder.
For 90% motor overload on DjiMavic pro is ribbon cable damage and another 10% can be something else
If you don`t have video signal you will need Signal cable as well
is the cable just next to ribbon cable an is more easy for change just follow cable and gently replace.
As you can see on this video there been clear flex damage and
After i change flex there is no motor overload on gimbal any more if your one still have that problem you are probably damaged new flex as well
like I set on video you must be very careful to do this
if you repair is successful and you don`t have any more motor overload on you mavic pro you can buy this 64GB SD CARD to make your mavic happy with plenty of free space for your new video : amzn.to/2kzenw3
please if this video help you click like write comment as I like to hear I help you and if you like my channel please subscribe and big thanks you can donate me on this link with will help me create more content like this
paypal.me/frogtechtips
Thanks all for any size on donation :-)even 1p is nice
FROG TECH TIPS AMAZON STORE for all staff you will need:
www.amazon.co.uk/shop/frog-tech-tips
If you have any question or you like see something else from mavic please let me know I will try do that as well
if you need link for ribbon cable or signal cable write comment and I will more that happy answer and help you find best deal
or if you need repair by professional let me know as well
for AliExpress worldwide flex buy here
s.click.aliexpress.com/e/_mKi...
and other parts here
s.click.aliexpress.com/e/_mqp...
Amazon UK:
link for ribbon cable : amzn.to/2jYFqnu
if you engine is broken buy this for repair :amzn.to/2G7cDqH
full part gimbal :amzn.to/2D1o136
if you prefer ebay UK use this link :-)
ebay.us/icgBrE
for best choice look on this link :
ebay.us/QL26HS
if you are scare replace flex buy this :
ebay.us/EwsXSK
or this full part :
ebay.us/ZcRBuY
if you prefer ebay USA use this link :-)
for flex : ebay.us/ILblBW
for full part :
ebay.us/ohT8R8
this link is for best choice :
ebay.us/3wAqqR
Do you like get repair by professional
If yes check :
Spark Angels KETTERING - go to his website and book repair
sparkangels.co.uk
Good news Mavic Pro 2 is out and here is link for buy this new toy if you like upgrade :
Mavic pro 2 is out check this link for buy it now :
amzn.to/2N7qsUW
ebay UK:
ebay.us/Mmucui
ebay US :
ebay.us/g3rU4p
Amazon UK :
MAVIC PRO 2 :
amzn.to/2I7OHle
MAVIC zoom 2:
amzn.to/2Dnm98n
Please if you like this video click like and subscribe as well
if you like contact me write comment below or Email
frogtechtips@gmail.com
BIG NEWS YOU CAN ORDER FROG T-SHIRT NOW JUST CHECK THIS LINK teespring.com/en-GB/shop/FROG...
Please if you like this video click like and subscribe as well
If you like my channel and you would like support me click on donation button :
www.paypal.me/frogtechtips
- easy support use affiliate link for ebay - ebay.us/wPn1l8
- FROG AMAZON STORE : www.amazon.co.uk/shop/frog-tech-tips
- for permanent support go to - / frogtechtips
Thanks so much
if you like contact me write comment below or go to my Facebook
Frog - Tech - Tips / frogtechtips
or send me message to - m.me/frogtechtips
twitter @frogtechtips
Instagram - / frog_tech_tips
Thanks again for watching
If you like my channel and you would like support me click on donation button :
www.paypal.me/frogtechtips
Thanks again for watching
NOW YOU CAN BUY FROG TECH TIPS T-SHIRT AS WELL JUST CLICK ON LINK : teespring.com/en-GB/shop/FROG...
~-~~-~~~-~~-~
Please watch: "Frog - Tech -Tips / Channel teaser /watch this to find out what's is about on this channel"
• Frog - Tech -Tips / C...
~-~~-~~~-~~-~
@frogtechtips 6 жыл бұрын
I hope this video help many people and if you like say thanks to me you can use Donation button on main page,buy flex or part you need over link in description and big thanks everyone who make decision donate something to me :-) paypal.me/frogtechtips
@mort3770 6 жыл бұрын
Thank you. This is the best video I've found for replacing the cable! Most, if not all other videos on this subject are horrible.
@frogtechtips 6 жыл бұрын
Tim Wynkoop thanks so much I tried my best and I hope you will enjoy more content for me and if you can share my videos as well thanks
@frogtechtips 6 жыл бұрын
Hi just like say thanks again and now if you like my channel I create new donation button to help me create more content like this (for button check description or main channel page thanks )
@SpryBrent 4 жыл бұрын
While there were still times I had a hard time following how to put the cable in place, this was the best video that did help me the most! Thank you!
@frogtechtips 4 жыл бұрын
you welcome and I hope you will subscribe to my channel as well and for big thanks you can push the donation button as well :-) don't forget share my channel and nice to have you here
@Lola.Owlace 3 жыл бұрын
That one is showing clearly if needed again ! kzfaq.info/get/bejne/mphmfpOL17XGm30.html
@airshowvision 6 жыл бұрын
Thank You for this the best video for this problem I have seen. After a 37mph crash into trees my camera was permanently facing to the ground, the vibration rubbers torn from the plate and once plate changed, the gimbal would not calibrate over 5% even though the gimbal and ribbon looked almost like new. I wasn't confident this new ribbon would fix the issue but it has, despite being worryingly complex and finicky to change. I subscribed of course and wish you the very best with your great channel which really helps idiots like me who crash!
@frogtechtips 6 жыл бұрын
airshowvision hi that's make me happy if I can help to another people and can save you some money as well .this flex sometime works like magic and even very small damage can make big problem Thanks for subscribe and if you will need any more help just ask me And if you like sey big thanks smash that donation button for my channel :-)
@kwasipoho 6 жыл бұрын
I want to say profound thank you . Your video is very detailed and has been 100% instruction to getting my drone flying again today. Thank you very much!!!
@frogtechtips 6 жыл бұрын
Baffour Addo thanks so much for your words Iam really happy I help you if you can subscribe to my channel as thanks that will help me and any problems try as Iam more that happy help you
@frogtechtips 6 жыл бұрын
Hi just like say thanks again and now if you like my channel I create new donation button to help me create more content like this (for button check description or main channel page thanks )
@AdrianCalgary 6 жыл бұрын
Boy, I sure hope I won't get to this stage with my drone. But if I do, this will help. Cheers for that.
@frogtechtips 6 жыл бұрын
Adrian Calgary you welcome and if you will have any other problems just try ask I will try help you
@jfcfilms3883 6 жыл бұрын
you saved my flights with this , thank you very much !
@frogtechtips 6 жыл бұрын
JFC hi Iam really happy I help you if you will need any help in future just ask Please stay tune subscribe and if you like say big thanks push the donation button :-) have a nice day
@muzikmon2267 6 жыл бұрын
WOW TALK ABOUT PATIENCE THAT WAS AWESOME!!!!! I WATCHED EVERY SECOND OF IT IN MY MAVIC PRO HAS NOTHING WRONG WITH IT LOL!! I just wish you showed it installed and working to finish it off... ;)
@frogtechtips 6 жыл бұрын
muzikmon2267 hi man I have more mavic pro video just check my channel for that where you can find video from start to finish as well plus if you will need any help just ask
@LawnCrack 4 жыл бұрын
Thanks. I used this and 2 other tutorials on KZfaq and finally got it!
@frogtechtips 4 жыл бұрын
You welcome
@Lola.Owlace 3 жыл бұрын
You should be fine with that one : kzfaq.info/get/bejne/mphmfpOL17XGm30.html
@brianphuket5951 3 жыл бұрын
yes, it takes several videos to get it, I am still struggling with the looping of the gimble wire, it is very difficult to see and maintain the position of the gimbal when you are threading it, it can be blurry or fingers in the way. not your fault, not a complaint. it is just a little difficult. Thanks for the video and your help, it is one of the better ones I have seen.
@OregonBatman 6 жыл бұрын
Hope I never have to take mine apart! Backing you up here... could use a back up myself! Thanks for the video, that is handy!
@frogtechtips 6 жыл бұрын
+OregonBatman you welcome man I hoped you will never need but if yes I hope this will help you amd if you have any problem with your mavic just ask I will try help you
@OregonBatman 6 жыл бұрын
Thank you sir! I know where to come to now! :)
@latinovision 6 жыл бұрын
wow you need lots of patience for this king of work , everything is so small
@frogtechtips 6 жыл бұрын
El Miner yes it is an small mistake you need do again;:-) BTW welcome on my channel
@NanasCookingcraftcorner 6 жыл бұрын
Hello Frog tech. Just stopping in to check out your video. It's been a while since I have seen you. Great video.
@frogtechtips 6 жыл бұрын
HI thanks Iam still on middle of moving I need about two more weeks to produce new content
@Trex531 6 жыл бұрын
Hey, this is pretty good! 👍 Even though I have not had any issues with my gimbal, now I have a good reference just in case. Good job!
@frogtechtips 6 жыл бұрын
Trex531 hi you welcome and if you will have any trouble just ask I will try help you
@Trex531 6 жыл бұрын
Frog - Tech - Tips Thank you, I certainly will! 👍
@frogtechtips 6 жыл бұрын
Trex531 no problem and don't forget subscribe :-)
@lithiumfire9693 3 жыл бұрын
thanks for the video! my ribbon cable looked fine, but I guess a connection must have split underneath the insulation. I replaced it and have my filming drone back!
@frogtechtips 3 жыл бұрын
that's so nice and i hope you will like my other content as well
@AlbertVideomaker 6 жыл бұрын
Thanks , very helpful , great video
@frogtechtips 6 жыл бұрын
Albert Vaja no problem man and good luck
@livedarts6749 6 жыл бұрын
I LOVE YOU!!!! Just repaired my Mavic pro with your helping Guide after i crashed it. My Ribbon Cable broke at the same place like yours. . Thank you so much for this great Video. 1000 Thumbs up my friend. I am happy now. ;)
@frogtechtips 6 жыл бұрын
LiveDarts that's cool man if you can click subscribe and stay tune on my channel will help so much plus reform me to you friends as well I will soon run giveaway you are more that welcome entry
@livedarts6749 6 жыл бұрын
Already done my friend ;)
@frogtechtips 6 жыл бұрын
LiveDarts thanks and I hope you will like my other content as well and any problems just ask more that happy help
@frogtechtips 6 жыл бұрын
Hi just like say thanks again and now if you like my channel I create new donation button to help me create more content like this (for button check description or main channel page thanks )
@timomoebes 6 жыл бұрын
thank you very much. I have to fix it as well after a crash today. If I have questions I will get in touch with you :-)
@frogtechtips 6 жыл бұрын
Timo Ricky Möbes no problem and I happy my video help you I hope you will stay tune on my channel and you like my other content as well
@bndchootage3296 5 жыл бұрын
realy good video, i gonna try tomorow by myself to do this job, i hope that my sensors also will allright... thank you for the video !! ☺☻
@frogtechtips 5 жыл бұрын
you welcome and if you will have any questions just ask
@joeybashaw4533 6 жыл бұрын
thanks man, well done. back up and running
@frogtechtips 6 жыл бұрын
Joey Bashaw cool nice to hear and I run give for thanks 100 sub if you like have a look
@BuilditRT 6 жыл бұрын
Awesome video as always!
@frogtechtips 6 жыл бұрын
Build it R/T thanks so much
@Macgyver7th 5 жыл бұрын
nice upload, this was fun to watch the fix
@frogtechtips 5 жыл бұрын
thanks so much look on my new video I think you will like it
@murisanfamily 6 жыл бұрын
Hey, I'm new to your channel. I saw you in a livestream. I think my brother and brother in law will love your channel. I will share it with them. I hope we can become friends.
@frogtechtips 6 жыл бұрын
The Murisan's Family Vlogs thanks so much and welcome on my channel I hope you will like my other content as well and any problems or questions just ask
@gorogroland4081 6 жыл бұрын
BIG THANKX!!! I have repair my one with your video!!! Thanks soo much!!! If u can make a movie about explain more about how to put back the cable !!!take me 1 hour to work out... :D Anyway !!! BIG BIG THANKS
@frogtechtips 6 жыл бұрын
+Görög Roland hi thanks for your feedback and yes I can do more if you tell me with part you have problem put back did you check my new video about gimbal start to finish if not please have a look And thanks again for watching my channel I hope you subscribe as well and enjoying my other content as well
@frogtechtips 6 жыл бұрын
Hi just like say thanks again and now if you like my channel I create new donation button to help me create more content like this (for button check description or main channel page thanks )
@OnlyWayToPlay 6 жыл бұрын
Thanks for sharing!
@frogtechtips 6 жыл бұрын
+Albeir & Michelle you welcome
@korotkoff73 5 жыл бұрын
GREAT VIDEO!!!!! Thanks! I fix it with your help!!! :) So it really puzzle from DJI :)
@frogtechtips 5 жыл бұрын
You welcome and thanks to let me know iam happy for you
@POPOTV 6 жыл бұрын
Super video. Love it. We support all our subbed friends !!
@frogtechtips 6 жыл бұрын
thanks so much
@GolfTesla 3 жыл бұрын
I came across this video as I occasionally (note: not always) get heavy gimbal shake (sometimes with, sometimes without an "excessive vibration" warning) and that is absolutely useless for films for my Golf&Tesla channel (I use the drone mainly for my golf course reviews, views of Tesla superchargers from above, and occasional landscape footage). However would like NOT to need to take the camera and gimbal apart, just afraid to break things even more in the process - but thanks anyway. Your video is well made.
@frogtechtips 3 жыл бұрын
Thanks I hope you click subscribe as well
@GolfTesla 3 жыл бұрын
@@frogtechtips i did. I hope you too :)
@frogtechtips 3 жыл бұрын
@@GolfTesla yop i Can
@jasoncorr7193 3 жыл бұрын
Great Video Brother 👊🏽👌🏽 Very well explained and great detail
@frogtechtips 3 жыл бұрын
Thanks so much I hope you click subscribe
@geethkurera2802 6 жыл бұрын
Lots of thanks
@frogtechtips 6 жыл бұрын
Geeth Kurera thanks and I hope you will like my other content as well and merry Christmas
@mt07toooldtowalk42 5 жыл бұрын
Well played mate, Thanks.
@frogtechtips 5 жыл бұрын
you welcome
@emcikemo55 5 жыл бұрын
Super explained...you are the best
@frogtechtips 5 жыл бұрын
you welcome and I hope you will subscribe my channel and as big thanks you can click on donation button
@steelers454 4 жыл бұрын
Hey wanted to thank you for the video. It help me replace my gimbal cable which I had never done before. But there is a couple of thing I wanted to point out when doing my cable compared to your. maybe you can do another video showing the things I'm talking about for someone else that might need help on replacing theirs. First off I see the cable has letters by each connector. It would be nice to show which letter connector goes where on the gimbal. Also my connector didn't have sticky tape in spots where your did. Also this one might be a little harder to show but try to show how you routed the cable better. Without your fingers in the way I had trouble trying to figure out how the cable would turn because it keep getting twisted. Also one thing that was not pointed out in the video was the connector in the back of the drone that comes unplugged when you remove the top. I never knew it was there. I got everything put back together and fired it up and it kept give me a error and I looked it up and had to take it back a part and then I seen the cable and plugged it in and then it worked great. Also you might Mention that you might have to recalibrate the vision sensors as well. other then that is was not that bad to do thanks again for your video.
@frogtechtips 4 жыл бұрын
Hi thanks for your comment. If you have a look on my channel I have 3 video how to replace this cable where I show how to do from different perspectives. anyway iam happy I help you and if you like say big thank don't forget subscribe share my channel and if you want make some tips clik 9n donation button :-)
@SaadonAksah 6 жыл бұрын
Awesome video!
@frogtechtips 6 жыл бұрын
Saadon Aksah thanks so much
@RobertoGarcia-mo4qc 6 жыл бұрын
Best video of this Problem in KZfaq. I got a question, before ribbon change, ur camera send imáge? My screen is completly black.
@frogtechtips 6 жыл бұрын
Roberto García ok if your images is completely black you will need video signal cable as well probably is the second cable in gimble And thanks so much your coment is mean to much for me Good luck with repair
@Lola.Owlace 3 жыл бұрын
Try that one for the video cable: kzfaq.info/get/bejne/mphmfpOL17XGm30.html
@Yargoogargoo 5 жыл бұрын
Do you use any adhesive when reattaching the new ribbon cable? Seems the connectors might come loose again during flight without adhesive?
@frogtechtips 5 жыл бұрын
hi yes I use black silicon bu t will be OK without as well
@KaYingLeeChannel 6 жыл бұрын
Nice video, I subbed and support you.
@frogtechtips 6 жыл бұрын
Ka Ying Lee Channel thanks so much and welcome on my channel
@JTsCrappieCave 5 жыл бұрын
New supporter here from Pusa's live stream
@frogtechtips 5 жыл бұрын
Hi thanks and welcome on my channel I hope you will like my other content as well
@NanasCookingcraftcorner 6 жыл бұрын
thanks so much hit your red button your 1.1 plus mine lol
@frogtechtips 6 жыл бұрын
Nana.s Cookingcraftcorner no problem you are nearly 1k you need some support with this
@fojedoratal 6 жыл бұрын
i am sure it's only the Ribbon because the camera is still working ( image).. also i can see where its broken ... Thanks for the video it will help for sure !!!
@frogtechtips 6 жыл бұрын
Mark Devisé no problem and good luck with repair any problems let me know I will try help
@Ozibits 6 жыл бұрын
great job!!!!
@frogtechtips 6 жыл бұрын
OziBits thanks man and I hope you will like my other content as well
@MRnounoursSQ 6 жыл бұрын
Nice video came to help i need some support to. Will watch more.
@frogtechtips 6 жыл бұрын
+MR. Teddy Bear thanks I will check your channel latter
@christiangabasa1432 4 жыл бұрын
Awesome video man... I bought a refurbished camera/gimbal assembly off Ebay after I lost my original camera assembly in a crash... It was a fairly easy installation but when I powered the drone I had video feed but the gimbal didn't do the "gimbal dance" and it gave me a gimbal overload message... not even 2min later I smelled smoke from the new refurb assembly... does that sound like a ribbon cable to you? I ordered a ribbon cable and planning to do this job but I just want to make sure I diagnosed it right... thank you again dude... great video 👏
@frogtechtips 4 жыл бұрын
Hi bro ye sounds like flex cable burn for some reason try new one and let me know
@ToxicityAssured 6 жыл бұрын
Great video! Thanks for the help.
@frogtechtips 6 жыл бұрын
ToxicityAssured you welcome and I hope you will like my other content as well please stay tune thanks
@ToxicityAssured 6 жыл бұрын
Don't worry, I subscribed. I've had my Mavic for a few days. The weather has prevented me from flying it yet. I have been watching WAY TOO MANY videos trying to learn EVERYTHING before I fly a pay check! With my background, I've realized most Mavic issues can be fixed at home and quickly.
@frogtechtips 6 жыл бұрын
ToxicityAssured that's cool man I hope you will have lots of fan and of you will need any help just ask
@MrBerenguer67 3 жыл бұрын
Thank you
@frogtechtips 3 жыл бұрын
You welcome
@DSWJoyrideProductions 6 жыл бұрын
I'm always looking for another good tech channel... new supporter! #sanecommunity #IamaCreator
@frogtechtips 6 жыл бұрын
DSW Joyride Productions thanks so much for your support and I hope you will like my content as well
@mickeywilsonbushcraftandsu2513 6 жыл бұрын
I found you on # I'm a creator you have my support
@frogtechtips 6 жыл бұрын
Mickey Wilson thanks so much and welcome on my channel
@NanasCookingcraftcorner 6 жыл бұрын
Hi again hope all is well.
@frogtechtips 6 жыл бұрын
Hi ye not bed slowly start preparing new content
@RASDKB 4 жыл бұрын
Great video. Did you still have an image with a broken ribbon cable? I am trying to figure out what my problem is after I crashed the mavic pro indoors. I got two error messages on my app screen one saying gimbal error the other one says camera sensor error. I got no image at all on my app but still can take pictures. Does this mean I have to replace the signal cable as well?
@frogtechtips 4 жыл бұрын
Hi ye sounds like you will need replacing bot cable probably is good idea buy complete part look on description
@bwalker205 6 жыл бұрын
Great video!!! I do have one question though... If my gimbal tends to drift left and/or right during flight does that mean I need to replace the entire gimbal or could I simply replace the gimbal arm?
@frogtechtips 6 жыл бұрын
Try calibration first and upgrade all firmware
@bwalker205 6 жыл бұрын
I tried Auto Calibration, IMU calibration, and everything else. I am afraid something might be wrong with the device itself. It did take a crash when I first got it but I wouldn’t have known in the footage then because only just recently did i start editing the video....?
@frogtechtips 6 жыл бұрын
@@bwalker205 try calibration in dji assist on pc or Mac software if that pass should by ok if not and you say you have crash there is possibility flex damage as well
@xray364 4 жыл бұрын
Thanks, good video
@frogtechtips 4 жыл бұрын
You welcome
@junkpick 4 жыл бұрын
Hey thanks for sharing.. new friend here from pusa studios :)
@frogtechtips 4 жыл бұрын
Hi welcome on my channel and I hope you will like my content as well
@fukagawaneko 6 жыл бұрын
Interesting video！ I subbed your channel
@frogtechtips 6 жыл бұрын
深川猫近堂 thanks so much I hope you will like my other content as well
@lubetube12341 6 жыл бұрын
Hi Frog. Brilliant video. Hope I never have to do that job. It frightened me watching you performing it! I have a problem with my camera on the Mavic Pro. It is focussed at about 5 or 10 cm and will not change or autofocus. Any ideas what I can do? I have tried camera reset. It's been working perfectly - I haven't crashed it or dropped it.
@frogtechtips 6 жыл бұрын
Derek White hi not sure what can be wrong do you have up to date firmware and maybe your lens is foulty with is easy repair
@lubetube12341 6 жыл бұрын
Yes all firmware is up to date.
@frogtechtips 6 жыл бұрын
Derek White ok if you have all up to day I think your lens is faulty it's not expensive part you can get risk to buy I try swap
@lubetube12341 6 жыл бұрын
Hi Frog, I don't understand what you mean. I have been quoted 300 dollars for a repair and told it could be more if other problems are found with the camera. Seems very expensive to me.
@frogtechtips 6 жыл бұрын
Derek White really 300 is to much just buy lens and try replace yourself or buy complete gimbal if you need link for part I mean let me know I will send you that New gimbal you can buy about 150 now I think and is so easy to replace
@MrBerenguer67 3 жыл бұрын
Hi thank you four your video I have a Mavic Pro and now is Said remove the clamp the camera is hoverloding what you thing it is thank you very much
@frogtechtips 3 жыл бұрын
Hi this sounds like common flex problem just replace flex and you should be fine
@lulugun 6 жыл бұрын
Great video
@frogtechtips 6 жыл бұрын
thanks this mean so much for me
@liga1indonesia345 6 жыл бұрын
Nice video
@frogtechtips 6 жыл бұрын
KZfaqR PEMULA SUKSES thanks so much
@txilibrist 2 жыл бұрын
After a small bump at 50cm from the ground and without visual damage, the gimbal does not respond and only the Pitch motor moves. I have already changed two flex cables of the gimbal and with both, the Yaw and Roll motors do not move, only the Pitch works. There is no seizing of the motors, they turn well by hand, but it seems that they do not get voltage. He has not received any serious blows. camera signal OK I find it hard to believe that both cables have the same fault. Two (three) faulty cables? where is the problem? How can I check the motors in another way? Thank you for the video. Sorry for my bad English.
@frogtechtips 2 жыл бұрын
Hi is hard to say what can be wrong but as you already replacing flex and doesn't help I will try completed part replace
@majklnajt1772 6 жыл бұрын
THANKS 100 :)
@frogtechtips 6 жыл бұрын
+majkl najt cool I hope I help you
6 жыл бұрын
Nice!
@frogtechtips 6 жыл бұрын
Ďakujem
@tryingtomake9871 6 жыл бұрын
Good job.
@frogtechtips 6 жыл бұрын
Trying To Make thanks so much
@tryingtomake9871 6 жыл бұрын
I am c@nected with y o u.
@frogtechtips 6 жыл бұрын
Trying To Make thanks and I hope you will like my other content as well
@fpvdreams8190 6 жыл бұрын
Hello. Can you help me with my mavic. Having a no-focus problem on my camera and not sure I can do these repairs myself. Are you taking any orders ?
@frogtechtips 6 жыл бұрын
Rc Drone hi if you are from UK check description and click on website for order repair
@fojedoratal 6 жыл бұрын
i hope i will able to do this to ... because i had also a little crash en broke the ribbon gr from Belgium I orded the ribbon in Internet for 13, 5 euro ... have to wait for about a week to arrive at my place
@frogtechtips 6 жыл бұрын
Mark Devisé let me know but if you have only overload problem and camera picture is still ok flex will help I think just be sure all 3 motor is moving smuth if yes change the flex :-)
@popperdre3734 5 жыл бұрын
l loved this , l opened mine and l followed all the steps , but lm not seeing any problem with my ribbon , it seems fine , but when l try to fly it , l cannot control the camera , l can not turn it to another side like l used to , but the video is clear and can take images , but controlling the camera l cant ,it just turn to any direction it likes , what can be the issue l love your video , l like and subscribed , thanx a million
@frogtechtips 5 жыл бұрын
hi thanks so much for you support and if you have problem with gimbal I will recommend replace ribbon cable anyway I have more time situation where ribbon cable looks absolutely perfect but still give overload error I think I made a video about that as well if you have problem with gimbal this is cheap to try for fix and usually for 90% times fix the problem
@frogtechtips 6 жыл бұрын
If you need buy Ribbon cable flex please look on description for link thanks so much for your support and I hope this video hel you fix you motor overload problem
@brannicpang 6 жыл бұрын
i need to save this clip .. "touch wood"😂😂😂
@frogtechtips 6 жыл бұрын
+BrannicPang yop man this video help already so much people and will come more on my channel stay tune thanks
@brannicpang 6 жыл бұрын
👍👍👍👍💪😘
@birdsworld3566 5 жыл бұрын
Cute video my friend👍👍👍👍👍
@frogtechtips 5 жыл бұрын
thanks so much
@yelenaisaak8441 3 жыл бұрын
Hi, I have the mavic pro and it shows “gimbal motor load too large”. Is this the same issue as the “gimbal overload”? And if so, would this be the right video to follow out the other video you posted on fixing the mavic pro?
@frogtechtips 2 жыл бұрын
hi sorry for late reply ye is the same and if you replacing flex should be fix
@YoGRIND 6 жыл бұрын
1:47 The flex cable is broken the motors will not move at all. Gimbal overload comes from when the flex cable is install incorrectly causing the motors to overwork... not when its broken if i'm correct?
@frogtechtips 6 жыл бұрын
hi yes if is completely broken motor not move at all that's correct and give you overload problem if its small damage motor still move as crazy and give you overload error problem as well or you can have burn on flex I see many problem but for 95% if you have overload error you need replace ribbon cable to fix problem last 5% can be PCB fault or motor at self on gimbal from about 50 drone I repair only 2 of them been different problem as ribbon cable for fix this motor overload error I hope this will answer your question
@YoGRIND 6 жыл бұрын
yep thanks
@frogtechtips 6 жыл бұрын
wordupmag you welcome
6 жыл бұрын
video good
@frogtechtips 5 жыл бұрын
thanks
@JohnODonovan1 5 жыл бұрын
at 9:54 something important happened because that's where I'm having a problem. Should it be sticking at this point or not necessarily .? I'm not sure if mine came not as sticky as some but I would like to hear a clear talk about the importance of the adhesive points. I think it's probably the most important part of the assembly , however out of 9 videos so far , no one really talks about it and if they do you can hardly hear them or their hand is in the way when they mention with mumble what it is they are doing. I believe that you can make a kick ass video for this which is badly needed . Danke
@frogtechtips 5 жыл бұрын
hi ye you right some new cable come with bad double tape and you need you see differ to be sure is stick. iam not sure how important it is bit always is better if hold on position as this cable is so sensitive. I have talked already in one of my video not sure on with one as I made tham about 1y ago look on my channel I have more videos about this gimbal problem on my channel and I will have a look on my archive to see If I have some footage to use make video clearly just about that
@soothan86 6 жыл бұрын
I bought a new gimbal ribbon installed it every step of the way exactly and it still didnt work took it apart again checked all connections n still has gimbal over load what else could i do? please help
@frogtechtips 6 жыл бұрын
stephan joe hi really sorry to hear you Don have luck did you check all 3 motor like I say on start of this video all motors must moving smuth ok I hope you do all good without any damage and as you still have this overload problem I will recommend on your situation buy complete new part good is is cheap now and easy to swap you will need this rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F253603529807 I hope this will help you have a nice day
@amitprajapati9053 6 жыл бұрын
It's compulsory to replace ribbon cable, can we reconnect the same if its not cut or damaged?
@frogtechtips 6 жыл бұрын
amit prajapati cable can have damage even if looks ok new cable is so cheap just buy new one
@bill7575 6 жыл бұрын
Problem! I installed the ribbon cable, but when I turn it on the gimbal just shoots up, shoots back, then freezes facing down. Won't let me calibrate it past 5%. Help asap please!
@frogtechtips 6 жыл бұрын
charles walls are you still have gimbal overload error if yes there can be problem with motor or top logic board or you are damaged new flex when you fitting
@bill7575 5 жыл бұрын
@@frogtechtips Got a new gimbal $40 fix amzn.to/2tHQWVL
@spencerboaz2385 6 жыл бұрын
OK now how much do you charge to do this ? Lol great video .
@frogtechtips 6 жыл бұрын
+Spencer Boaz hi if you are from UK please send me message on fb and I can try help you
@doughenry693 6 жыл бұрын
best yet... shows how to fold the cable....
@frogtechtips 6 жыл бұрын
Thanks so much you can check my other video for that problem kzfaq.info/get/bejne/ZtWaec13nJ3KgoU.html plus more will come once I finis editing I hope you will stay tune in my channel
@Lola.Owlace 3 жыл бұрын
that one as well if you need : kzfaq.info/get/bejne/mphmfpOL17XGm30.html
@muktosajbati6713 6 жыл бұрын
nice video uplode
@frogtechtips 6 жыл бұрын
thanks so much
@sangpak03 6 жыл бұрын
Is there a link to buy the ribbon cable for United States? My mavic is experiencing gimbal overload problems.. Thanks.
@frogtechtips 6 жыл бұрын
+Sang Pak hi I can check that for you this evening
@frogtechtips 6 жыл бұрын
hi here is a link for YOU amzn.to/2AcK085 and if you have damage on motor you can buy complete part here : amzn.to/2k7M5fd I hope that help you
@ZahraVlogs 6 жыл бұрын
done:) nice
@frogtechtips 6 жыл бұрын
Zahra Vlogs thanks
@petrjanek7763 5 жыл бұрын
amazing
@frogtechtips 5 жыл бұрын
Thanks so much
@petrjanek7763 5 жыл бұрын
you welcome, this video helped me and saved money"
@frogtechtips 5 жыл бұрын
@@petrjanek7763 cool man that's been main reason make this video I hope you will stay subscribe :-)
@elvismann3446 6 жыл бұрын
Is there a part number for that flex wire?
@frogtechtips 6 жыл бұрын
+Elvis Mann hi I will check for you and let you know
@frogtechtips 6 жыл бұрын
Hi on flex there is two part number one is with barcode on top with is 092DDCP002012Y And second one is printed on flex P01788.10 KW1643 if you will need see picture I can post that on my FB page on request or I can find you link to buy just let me know I hope that helps you
@elvismann3446 6 жыл бұрын
thanks
@mptang1 6 жыл бұрын
Must be a DJI insider. I wish I had the courage to try this .
@frogtechtips 6 жыл бұрын
Mun Poh Tang hi yop is so hard but we are offering service for this if you are from UK
@mptang1 6 жыл бұрын
Thanks, unfortunately I am from Singapore. Will have send in to DJI in China or HK to have my mavic fixed. But I will try to DIY next time I have same issue. Thanks for the very elaborate video.
@frogtechtips 6 жыл бұрын
No problem if you will need more help with your mavic pro let me know and I can try help you or post video that can help you as well
@frogtechtips 6 жыл бұрын
+Mun Poh Tang no problem I wish you get your mavic repair soon and stay tune in my channel thanks
@xxsikeboixxplayz6486 6 жыл бұрын
i'm having the same problem, you have said that you offer repair services, where about in uk are you from and how much would you charge for this?
@kwesiglover964 6 жыл бұрын
hi frog tech tips! i have a mavic pro which i crashed but had it fixed but recently started giving me the gimbal overload headache, i have narrowed the issue down to some tension when the gimbal is starting up, just like you showed in your video at 1:08 it moves freely to one side but when it rotates to the other side it gets stuck, i don't know whether it's some dirt making it jam there! please help!!
@frogtechtips 6 жыл бұрын
solomon glover hi is been your crash bad what do you have fix as if been fix and gimbal motor have some problems can damage your flex or can be your motor foulty that's mean you will need replace flex or complete part Did you fix your drone yourself or someone do for you
@kwesiglover964 6 жыл бұрын
Frog - Tech - Tips thank you for the fast reply 🙏🏽, first off I had good friend fix it for me and he’s busy now, he told me it wasn’t an issue he just opened it up and cleaned it up really, moved the gimbal a little to stop it from hitting the top on startup and it was working again, later on it started shaking like crazy during flight, and now it says gimbal overload, but I noticed that during startup when the camera rotates clockwise and anti clockwise it gets jammed when it goes clockwise, so I’m suspecting it might not be the flex cable, we’ll I hope it isn’t
@frogtechtips 6 жыл бұрын
hi from what you say is 95% cable problem i hope you can fix this if not just buy complete part is easy to swap if you will need any more help or link for buy any parts let me know
@kwesiglover964 6 жыл бұрын
okay thank you very much, i'll reach out if i need the links!
@frogtechtips 6 жыл бұрын
solomon glover you welcome anand some links you can find in description as well :-) even big thanks donation button for my channel OK any help you will need just ask And don't forget subscribe
@julyjuly7711 2 жыл бұрын
Zdravim dekuji za video bude se hodit.. ale optam se? Mam mavic pro a za letu se mi chveje obraz cim.by to mohlo byt? Ty gumicky vypadaji vsechny ok ... nevim po cem mam jit
@frogtechtips 2 жыл бұрын
To fakt netuším teba to rozobrať a skontrolovať môžu vyzerať ok ale môžu byť opotrebované
@julyjuly7711 2 жыл бұрын
@@frogtechtips kzfaq.info/get/bejne/abVxgrSHm7GsZXU.html
@julyjuly7711 2 жыл бұрын
@@frogtechtips zde sem natocil video jak ae klepe obraz a nejde udelat kalibrace gimbalu ve 31 proce tech to napise failed
@frogtechtips 2 жыл бұрын
@@julyjuly7711 zdravím to fakt vyzerá ako keby bola prasknutá gumička alebo prasknutý ten plast treba to rozobrať a pozrieť
@mal3x 6 жыл бұрын
Hello nice video! thank you i followed the instructions everything went smooth... but the ribbon didnt look damaged, and the overload error still the same! any ideas?
@frogtechtips 6 жыл бұрын
+Alejandro Hernandez hmm can you tell how that overload error come do you have any crash or just one day been there Do you check all motor it is move smooth if not that can be problem and you will need complete part or can be top logic board fault as well I have that one time
@mal3x 6 жыл бұрын
+Frog - Tech - Tips Hey thank you for your reply, crash, broke the plate, replaced it... also the ribbon the gimbal, use to rock back and forth, now just moves once and points down, and sends the overload error, failed to recalibrate, all axis feel smooth but i have no idea how sensitive is the gimbal to resistance.
@frogtechtips 6 жыл бұрын
Alejandro Hernandez ok thats you have crash hmm is thar any overheat on any of motor when you switch on if yes check that mother how smooth is it but if you replaced ribbon cable correctly and error is still there I will bet for motor problem and I hope you not damage new cable as is so delicate and even small nearly unvisible damage can occur that foult if you are sure you do all correct you have tree option Replaced all motor you can buy this part about £40 or can be faulty top logic board (get short damage from crash I see that once) but this part is very hard find as spare Last option is replaced complete gimbal with is so expensive that's why is as last option maybe is best way send somewhere for repair where can do diagnosis for you
@Andymtran408 Жыл бұрын
Hi i hadn’t use my drone for awhile and after turning it back on I wasn’t able to fly it. I had a gimbal motor overload and I order the flex cable from your description and after replacing it. I now have Gimbal Gyroscope Error, Forward Left Vision, forward right vision, Vision System Error Hardware Malfunction contact Dji Support. What should I do now?
@frogtechtips Жыл бұрын
Hi IAM not sure. Did you all connect correctly as vision system is to small camera on the front of your Mavic sound for my you forgot plug in or make some damage to it when you opening otherwise I really not sure is long time ago I repairs last Mavic
@Andymtran408 Жыл бұрын
@@frogtechtips do you fix peoples drone? How much you charge?
@frogtechtips Жыл бұрын
From with country you are
@IMTv-gd6td 6 жыл бұрын
Yo bro! My mavic humble doesn’t connect to my iPhone. The phone is connected to the remote. To fly but no picture. Can you tell me how to sort this problem out?
@frogtechtips 6 жыл бұрын
+IM. Tv do you have any errors on app
@grendelgaming9821 5 жыл бұрын
Hi New Sub
@frogtechtips 5 жыл бұрын
hi welcome on my channel I hope you will like my other content as well
@Inkster97 6 жыл бұрын
Quick question, I replaced the ribbon once and still got the overload message, I bought a new gimbal to see it that would fix it and the same thing, camera won't stop moving. Any recommendation? Thanks!
@frogtechtips 6 жыл бұрын
INKSTER97 did you replace top gimbal pcb as well
@Inkster97 6 жыл бұрын
I tried searching gimbal PCB no search comes up!
@frogtechtips 6 жыл бұрын
INKSTER97 really I will have a look for you and you say you are replaced complete gimbal is that gimbal come with that top pcb or been just motor but ye I will have a look and give you link
@frogtechtips 6 жыл бұрын
INKSTER97 look here this is part you can have faulty rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F223004510727
@Inkster97 6 жыл бұрын
I will give it a try at it, hopefully this will fix it!
@HealthyVeganLiving 6 жыл бұрын
Wow your numbers are really climbing, and so are your daily views. Gary
@frogtechtips 6 жыл бұрын
VEGAN KIWIS TO PISTACHIOS ye this is my best how to video with keep my channel grow :-) thanks for your support my friend
@zagora76 6 жыл бұрын
super:)
@frogtechtips 6 жыл бұрын
thanks so much
@shongwehunter7955 2 жыл бұрын
Can you plz help me with two of the gimbal Ribbons for the Dji Mavic Pro 4K plz
@frogtechtips 2 жыл бұрын
Hi what help you need
@shongwehunter7955 2 жыл бұрын
@@frogtechtips I need the Ribbon plz my friend
@lucuspritchard935 3 жыл бұрын
Hey. I replaced my ribbon cable but my camera will pitch but not roll and says gimble overload. I notice that when i turn on the mavic, after just a few seconds the ribbon cable starts to get hot so i immediately turn it off. I dropped my drone into water but took it apart fully and dried all the components and will now fly perfectly fine but im left with the camera not rolling. I get image but my side to side movement is gone. Could there be a short in the motor?
@frogtechtips 3 жыл бұрын
As 8s water damage I will definitely replacing full gimbal as there is probably some damege on motor look on description there is some links
@lucuspritchard935 3 жыл бұрын
Out of stock :(
@frogtechtips 3 жыл бұрын
@@lucuspritchard935 really just try find one form different sellers
@JimmysTractor 6 жыл бұрын
Mr frog, did you lose monetization? I made the requirements ahead of time, but all my videos were demonetized? I had to go back in and reapply like I had not met the requirements. My application was accepted and it says 7 days to review, but I had what I needed by the date they said I needed it. Did you have to reapply?
@frogtechtips 6 жыл бұрын
Jimmy's Tractor hi I lose as I don't have watch time I still need 65000 min :-( but I heard many channel have this problem I wish you good luck and I hope I will be accepted again once I have more watch time
@JimmysTractor 6 жыл бұрын
Frog - Tech - Tips ok, well when I reapplied it even showed 6,659 hours and 1,042 subs with green check marks by both. I remember subbing to you in the first days after the notice. Good luck on the hours, I got you a few minutes just no lol. BTW, I love my DJI and have used it in a few videos as my camera.
@frogtechtips 6 жыл бұрын
Jimmy's Tractor I think you will be accepted again I just think youtube leje recheck all channel with been send email as this channel probably grow in last 30 day so quick and youtube want to be sure all is legit And plus his new server update for all this change can make mistakes as well
@jesseculp594 6 жыл бұрын
done i subbed
@frogtechtips 6 жыл бұрын
+Jesse Culp thanks so much about welcome on my channel
@discoverdifferent2994 4 жыл бұрын
Hello , I hat the issue so if I turn my mavic on the gimbal shakes around and hits the drone , I already replaced the ribbon cable but I think I was stuck between gimbal and a motor cover on the gimbal . After replacing the gimbal itself and the ribbon cable it still dissent work do you have any ideas ? Would be great to hear from you ☺️
@frogtechtips 4 жыл бұрын
Hi if I good understanding did you replace full gimbal and still doesn't work
@discoverdifferent2994 4 жыл бұрын
Yes I replaced the gimbal but not the motherboard of the gimbal
@frogtechtips 4 жыл бұрын
@@discoverdifferent2994 ok maybe is PCB gimbal faulty is not a usual problem but can happen as well
@discoverdifferent2994 4 жыл бұрын
Do you know what I can do about that ?
@frogtechtips 4 жыл бұрын
@@discoverdifferent2994 do you have some hard crash
@nixxonnor 3 жыл бұрын
Did the fix work?
@frogtechtips 3 жыл бұрын
yes
@SaniGamePlay 4 жыл бұрын
bro do you know me? before 2 years ago we were friends if you remember me
@frogtechtips 4 жыл бұрын
Hi not sure bro
@SaniGamePlay 4 жыл бұрын
@@frogtechtips do you remember funny up loader?
@frogtechtips 4 жыл бұрын
@@SaniGamePlay Oh ye how is going do you have new channel
@Crazy2limchai 3 жыл бұрын
Hai sir. I have phantom 4 pro. It crash. Already replace many parts. But noo thw gimbal cannot be center. It go to lefr or right. Alresdy repalde tge esc yaw board still the same. Motor and ribbon replace new. Try many time recalibrate but still the same. Any clue to solve it.? Thank you.
@frogtechtips 3 жыл бұрын
Hi did you replacing only part or complete gimbal as there can be still some damage on motor
@Crazy2limchai 3 жыл бұрын
@@frogtechtips thanks for replying. I did repalce yaw and roll motor. Yaw arm. Ribbon cable and esc yaw board.the gimbal work well except the yaw got wrong angle. Cannott be center.
@frogtechtips 3 жыл бұрын
Sorry no idea why
@ATOZArun 6 жыл бұрын
👍👍👍👍👍👍👍👍👍
@frogtechtips 6 жыл бұрын
Thnaks
@richardkaz2336 6 жыл бұрын
No acid free glue/sealer/silicon on the plugs....
@frogtechtips 6 жыл бұрын
Richard Kaz no doesn't need at all never problem with that
Frog - Tech - Tips
Рет қаралды 140 М.
Jason Derulo
Рет қаралды 29 МЛН
Ted Nemeth
Рет қаралды 125 М.
Frankie Lopez SHOW
Рет қаралды 88 М.
HughTube
Рет қаралды 228 М.