thanks for comment

Do i need a new batteri?

Ya no dijiste nada, explotó o si funcionó, es que quiero hacer lo mismo🤣😂

😅 are yo going to update

i should try da same thing tho

did it work?

Thank u so much for good comment 👌👌👌👌👌

I think you need to invest in a good charger if your doesn’t shut off automatically

@@sarcastrophe6992 his point was that: even if the good charger shuts off automatically, you can overcharge a single cell. That WILL happen when one battery cell goes bad and then another cell gets overcharged to compensate. Each cell should have 4.2 volts. 10 cells added in series makes 42 volts. If one cell is bad and has 0 volts, then the other cells will have to have more voltage to still total the 42 volts for the charger to cut off. And they will be overcharged. Have you heard of lithium batteries exploding or catching fire? That is a definite possibility if one cell goes bad causing another to overcharge!!! Maybe the reason the circuit board stopped charging is because one cell is bad, and now you are overcharging all the rest of the cells the moment you installed this jury rig fix. It may not blow up until a second or third cell goes bad. But John Henry is so absolutely right!!! It is very dangerous to bypass the safety circuit. He has spoken like a true electrical engineer. GB, BSEE from U of H 1980.

U most welcome

If you are charger is working you can remove battery protection board may be battery protection board not working so in this case direct connect charger with battery but you have to be auto cut off charger .

Well not every single battery but each series which has however many in parallel but your on the right track

Yes this hoverboard has auto cut off don't worry my friend

@@YoursSmartTV Thankyou for reply

And plz help me my hoverboard is damage due to 250v direct goes in the charging port plz help me make a video on it

I just connected battery wire without protection board . Hoverboard charger has auto cut off .u can connect direct charger wire to battery

every battery has protection board just disconnect protection board from battery and direct connect with charger

@@YoursSmartTV okey i will try tomorrow :) thnks

if u use auto cut off charger don't worry it's fully safe

Not really if you have 1 bad cell it will heat up when charging become over critical burst into flames an shoot across your floor like a rocket, I've had that happen to myself and I ended up losing all the batteries because they all burnt

Same

Why?

@@pdbrooks7647 because if one cell goes bad and you have bypassed the BMS, the others can overcharge and catch fire or blow up.... You may have heard how dangerous lithium batteries can be.