Just buy-it and I figured was something wrong with charging... so I look on you tube and I found your video. My boy is happy now for his birthday.Thanks man. The battery was different but I sorted how to fix-it. You’re the man.

Could have explained that you were connecting the negative to the spot marked B- on the board, for those that have a different one, but thanks a million, saved my step daughters hover board! Or at least saved me $60+ buying another battery.

Best video on battery advice on the hole of KZfaq, I have not be able to charge my battery and have been up the fucking wall because I paid good money for these batteries, you have just fixed my problem in 5 minutes, thankyou very much you cleaver man , jfk over and out

It work after even 2 years of not using it thanks a lot buddy !

Had exactly the same problem. Same battery. Fixed it as shown in your video. Thank you.

I don't know if i was searching correctly but after 3 long months I finally found the fix for the same issue here on your video. Thank you very much.

Would have never thought of it.....when I excited the battery........STARTED CHARGING...THANK YOU SIR!!!!

You're genius, I have 10 units new never been used but all of them have this problem, your trick worked in all of them thanks man

DUDE!!!! thank you!!!! mine looked little different but i short circuited the black wire with other pads and now its charging!!! cheers brother

Very good video!!! You explain in details a simple trouble. Many thanks!

Save Money and Don't Keep Buying Battery. This was a Excellent Video... Thank You. Best Hoverboard Charging Problem Video on KZfaq!!!!!

My battery is different, but work's. Thank you!😱

THIS WORKS!! For anybody that does not understand tell me and I will help you!

It worked for me! Faulty BMS! Thank you

Great explain.... Thank you very much Cheers from Denmark 🇩🇰

Worked 100%!!! Thank you!

Good this works, thanks for the information, I changed two of the batteries because they had corroded but still wouldn't charge all problems solved now and link removed.

Great video. Good information! Thank you!

Thanks so much bro u helped me a lot i lost my charger and i wassnt able to use my hoverboard then when i got my charge so i look up yt and found u

my battery is diferent but i i looked for the place where are almost 10 volts (two big black wires) and... IT WORKS!!!! thanks a lot

can't believe it worked!! thanks master

Thank you so much for helping me

Thank you my friend. My battery is different inside and on voltage. My cable sparked some few times but after many tries it worked.

Thankyou for taking the time, after 3 months of no use my 'zinc smart gt' only has lights on the board if i have charger plugged in, it will recalibrate but still no movement in board, i take ''green light' charger out and everything dead again, no lights no beeps. So hopefully i can kick start the battery from inside or verify that its dead forever. I have multimeter but have never used one. Now i will open board up & try. My boy would be so happy. .... EDIT.....My battery pack is different, is he putting one wire on negative and other end to a positive? or neg to neg? wire sparks and heats up but no change, BATTERY reading at 12, charger still green light. Charger isn't faulty.

Deu certo aqui no Brasil, Thanks!!!!!!

Works also for me . Thanks from Italy

It works really well!!! Thanks

100% works. Thank you buddy, i love you!!!

My battery wouldn't charge because it was just a litter undervoltage. Battery light red and only beeping. But here is a tip: when you remove the gyro cable (next to the led cable) on one side the battery charges. When it gets to 36v then the gyro cable can be attached again. That only works if no cell has failed, but you can try it (just be around the first charges, in case anything goes wrong).

Thankss!!My battery is different but you help me a looot!!!

Thank you this really worked my son is really happy now

Muito bom ,sou brasileiro e através de sua colaboração resolvi o problema do brinquedo da minha filha ,ela está muito feliz obrigado amigo.

Thanks man, this helped me, it's working

Great, you are a Genius!! Many thx man!!

Thank you. Helps a lot.

Thanks for the big help .... nice video

Can i know the indicated power does Singapore sell as i might want learn your style fix my problem

Thank you, this worked good so my son & I are pleased. Thanks again 👍🏻

Many thanks, worked brilliantly!!!

Thank you so much.......it worked..!!!👍🏻

Thank you, your video helped me a lot man.👌👌👌

thank you i fix my daughter hover 1 👍👍👍

Thanks, i did like in the video and it started charging.

Nice one !!! Thankyou :)

Just wanted to say thanks it worked

you are a life saver. I think I ended up shorting several different spots on my board before it worked, but in the end... IT worked!!! Thank you So much!! Dunno if you still make videos or not, but you got a subscribe from me for saving me $100. Thanks again!

👀👀👀Brazil!!thanks

thanks dude..it was grate

Showww!!iam brazil. Thanks

Good video, thanks for the trick

Thank you for you help 👍

Excellent hack, worked for me, thanks!

The best, thanks!!!!!!

Damn this really worked. Started charging again. Thanks.

Thank you very much brother

Thank bro my battery also working thanks alot

Thank you very much

very usefull, thank you (y)

I luv dis guy it works man thank u I don't know how to thank u man

Thank u so much 😄👍

Thanks mate, fixed mine with the same fault.

thanks ur the best

thank you bro i love you

Good job broo thx you somuch

Thanks 😍

I have Same problem, thanx .

I know it's been 4 years but I recently just got this issue with my hoverboard and after watching several videos your video was the most helpful and simple way to fix👍🏽👍🏽👍🏽👍🏽👍🏽👍🏽 thank you after jumping it its now charging 😁✌🏽👍🏽

your a genius!!

Thangssssss Good Work

Merci 👍👍👍

Nice one and thanks.. Had a different setup but just shorted out the 2 negatives and off she went! 👌👍

My brand new hoverboard run time is around 25 minutes then it cut off power of board. At full charge it was around 41.5 V and after 25 minutes the battery voltage was only 37.8 V for cut off. Why is the voltage still so high and already there was a cut off the power? At wat voltage should the board switch off? Any suggestions?

What cable can I use to short it? Would a cut phone cable work?

Thank you

Grazie, funziona!!!

Good stuff, my battery was at 6 volts and wouldn't charge, had to short it out a few times but it finally started charging. It's now at 25 volts and climbing. Thanks

Acabei de fazer seu procedimento e deu tudo certo muito obrigado

Can this work with a razor and a segway minilite?

thanks broo

Muy buen bien lo acabo de hacer igual y ahora funciona

Genial!!! Thx

Merci beaucoup

Your the man brother got mine charging thank you for the video 🙂

What should i do my board i switch on charge e board during charge is flashing amber and power is indicate red light but within 3hr power indicate light turn green but board still amber flash for about 2~3hrs... auto shut down. After i plug out switch 🔛 everything connect well on green light but when I wanna ride another side flash red with peep sounds i try it few times but charge within 3hrs done yet after 1st time charge i can't even used already

mine is 4.5 volts or so. Is it worth the try?

Very good

Thanks

God bless you bro

Thanks, very much, work perfectly, you save me

Hi, My battery is showing 41.2v but hoverboard still won't work. Does that mean the BMS is at fault? Is there a way to fix the bms or do I have to buy a battery? thanks

How big is one cell in an ampere, and can I double the number equal to 10 ampere?

Tnks .

My battery is different. But when i try this method i just big sparks. Its a different layout. Have you got social media i can contact you and forward a picture

Very well..... But I'm little bit confused ... After that if battery consumed and low warning show than we have to do that same work again or we have to do it once??? Please tell me

@deiviskn When I make connection it shows red, but when I let go it goes green again, can i fix the link ?

om thank you it works ::::)))))

Thank you so much for saving my battery!

Bro i don’t have the voltmeter? Is it that i have tk connect the wire with voltmeter and then with the black wire or we just have to get a wire and connect it with the black wire? Plz reply i’m rly confused

Nu, berods padėjo, Ačiū. (looks like working, Thanks)

thank you so much.my charger is warm and the light is red. waiting for full charge.