How to fix misaligned forks/wheel/steering on motorcycles (1 solution)

Рет қаралды 38,835

Жыл бұрын

We all crash, and sometimes we crash in a way where the handlebar and the wheel takes most of the hit, and they often end up misaligned.
"There are many to skin a cat", and in this short video I am teaching one of the ways to get your bike back in sahpe with minimum tools and effort.
This is a simple tutorial on how to fix misaligned wheels / forks / wheels
-Diogo Guerra
#mechanics #advmotorcycles #motorcycletips
----------------------
Reach out!
info@offroad-offcourse.com
www.offroad-offcourse.com
Help me keep the videos coming!
1 - Hire me as a guide or instructor or rent one of my bikes!
2 - Buy motorcyle tires from me. Free shipping around Europe!
3- Learn offroad with my video course! offroad-offcourse.com/online-...
4 - DONATE: www.offroad-offcourse.com/donate
-----------------------
PROMO CODES:
12% discount on all FodSports intercoms @ fodsports.com/ - Use code "OROC"
10% discount on BN-ADV.com (Adventure/Offroad school)
Use the link bn-adv.com/discount/OFFCOURSE or use code "OFFCOURSE"
10-20% discount on "One Adventure" 3d rally towers for CRF300L and other bikes.
Use code: "OFFCOURSE" at oneadventureoffroad@gmail.com / instagram: @oneadventureoffroad
----------------------
Get notified of my latest motorcycle videos and clips and events!
/ offroadoffcourse
/ offroad_offcourse
----------------------

Пікірлер: 53

@jellyfinger Жыл бұрын

Be careful loosening all the bolts too much, especially if you are going to ride it to test before tightening. You could easily end up with the yokes/triple clamps dropping down the forks and jamming the wheel against the frame or engine.

@OFFroadOFFcourse Жыл бұрын

Your are absolutely right. Usually if you only loose the bolts half a turn like i suggest you should be alright. But i should have warned people about that :/ I rushed this video a little bit :( Thank you for your input. I will pin this comment ;)

@OFFroadOFFcourse Жыл бұрын

i've edited that bit out. thansk for the input :)

@bobcat7227 Жыл бұрын

But seriously why would anyone test it with the bolts loose.. obviously your ment to tighten them before any test rides

@robertr9343 Жыл бұрын

@@bobcat7227 🤣

@robertr9343 Жыл бұрын

@@OFFroadOFFcourse i crashed now im here

@DaveZee01 Жыл бұрын

Thanks for the handy tip! Here's a thought/tip re the way I do it. After tapping it straight/realigning it against a rock/doorway etc, I tighten all 8 about halfway - so that the forks don't unexpectedly pop through the yolks at the top, on a test run. If/when happy with the alignment, I tighten all the bolts as you described.

@wranglertr Жыл бұрын

Thanks for the tip. I have a slight misalignment on my crf rally. Will first try it with just loosening bottom triple clamp screws.

@bmwe6xcsm913 5 ай бұрын

Thanks man! Just what I needed

@norrielcornetes4187 3 ай бұрын

Nice video direct to the point is important thanks

@JohannesDalen Жыл бұрын

Can’t wait for November my friend! I had this happen on my 701 after a fall, but everything seemed straight except the handlebars and the wheel - It was the handlebar clamps that had twisted slightly.

@citizenX117 Жыл бұрын

life saver tip, thanx

@tomdoingfunstuff Жыл бұрын

Awesome man I love the tips and Tenere 700 content

@tschmidtty 2 ай бұрын

Cool video, thanks! Laid my KLR down today learning to wheelie, and I was afraid I bent my handlebars. I'll try aligning first though, if I don't see any damage!

@Riezig Жыл бұрын

Thanks for this video. I went for a ride this morning and found lots of sand, I ended up dropping my T7 at one point and found that the alignment went out. I remembered this video and used it to straighten my alignment in the middle of no where. It wasn't perfect but was 90% better than what they where, and was able to keep riding. Thank you!

@OFFroadOFFcourse Жыл бұрын

Thats brilliant! Thank you for commenting back 😁😁😁

@mabsbry1318 Жыл бұрын

See others comments for better ways to realign.

@AmazingPhilippines1 3 ай бұрын

Watching from the Philippines and I will try this. I had a kid/student run into me yesterday and misalignment is one of the issues.

@paulwelch4373 Жыл бұрын

Could you put out a video about rear wheel / chain alignment; as well. I put a 300mm steel rule flat against the rear sprocket face and adjust the rear wheel position to the point where the chain is exactly aligned with the edge of the steel rule. Seems to work. Also, love your channel !

@user-xn2vi8xz5z Жыл бұрын

Thanks for sharing this content, it actually helped me. I just dropped my bike today and had this bent.

@OFFroadOFFcourse Жыл бұрын

Brilliant! Ahaha...you can pay me back by sharing one of my videos somehwere 😁😁

@ADVENTUREISCALLINGOFFROAD Жыл бұрын

Holding the front brake and pushing down the suspension a few times after losen the bolts also helps solving the problem. /João

@OFFroadOFFcourse Жыл бұрын

Its true! Should have mentioned that one!

@jprafael Жыл бұрын

I usually do this way as well. But I tend to unlock the wheel bolts to make it work.

@fahianmiah3489 Жыл бұрын

Would this work on a moped which only has one yoke

@chadlisenby4806 Жыл бұрын

That makes complete sense . That's bro! It's off to the trails !!!

@OFFroadOFFcourse Жыл бұрын

Thanks man! glad I was useful :D

@robotech1990 Жыл бұрын

That happened to me twice. Both times i put the wheel between my legs, move the handlebars and everything (i thought )was straight. After that every time i loosen my hands from the handlebars, when driving, the byke started to pull right or left. One gets used to it in a couple of rides hahahaha...cheers!!

@windmusicfan Жыл бұрын

Good one ! Who did this to your little Suzuki? 😁

@natanmortenfeld5813 2 ай бұрын

what? if you loosen upper and lower triple bolts wouldn't the fork come out up and the entire bike will fall down? 😢

@helderneves91 Жыл бұрын

nada melhor que encostar a roda a um pinheiro e fazer força contrária hahahah

@SomeInfoSecDude Жыл бұрын

Thanks for the tip! These 'on the trail fixes ' vids are great idea. My questionis totally unrelated... i like your watch. What is it?

@OFFroadOFFcourse Жыл бұрын

Ahaha, what a odd question! Its a very normal watch, nothing too fancy about it :p Its a Timex Expedition (but there are different versions in the expedition series). Thanks for watching, noticing and commenting! :D

@JohannesDalen Жыл бұрын

I second this, I too like these ‘on the trail fixes’ 😁

@spotthedogg Жыл бұрын

How do you loosen all triple clamp bolts without the fork sliding up? I usually loosen upper triple and axle pinch bolts, then brace the wheel between my knees. ✌🏻

@OFFroadOFFcourse Жыл бұрын

And you are not wrong!...Thats why i recommend only loosening them half a turn. They wont slide down just like that... Usually 😅 To be honest, most times i dont even bother anything at all, just sit the wheel against a tree and turn the handlebar... But i dont think that is the most correct of ways.

@TomJAdv Жыл бұрын

Oh, i already see it ending in tear for someone! Loosen up only bottom clamp bolts, adjust as needed and tighen back up before testing - as if fork stancions will go through the top - rider will be even in a bigger problem then just a bit twisted handlbar. (And even that should be just as a emergency / temp fix, as thats not the correct procedure to reset twisted steering)

@OFFroadOFFcourse Жыл бұрын

You are right! And thats why I recommend only loosening the bolts half a turn. Its usually enough to keep the forks where they should be, even if you ride the bike (carefully, of course). Either way, another viewwer already pointed out that you should be careful doing this, and I pinned his comment up top for everyone to see. It was just a quick tip video, Its not a mechanic masterclass :D Thanks for commenting!

@mabsbry1318 Жыл бұрын

Your tip is wrong. It’s not correct and is potentially dangerous

@OFFroadOFFcourse Жыл бұрын

@@mabsbry1318 i've edited out that bit where i suggest people ride around with the suspension loose. thanks for the input.

@skylinerr4762 Ай бұрын

Are you talking about the lower clamp screw on the wheel spindle? Or just the bottom screws of the middle clamp? Cbr600 has a slight bend, I will try to fix it. I'm a little new, I'd be glad if you could help me.

@robertkoper3039 Жыл бұрын

I learned quite a few tricks from you last month!Hope all is well and cooling down a bit.Can not wait to see the new crf 300 being used and your ideas on it now you own one. I will email you shortly...have fun in the mud when you get some!

@OFFroadOFFcourse Жыл бұрын

It rained here yesterday and a bit today... Perhaps we will have mud next time :D

@jonasfrito2 Жыл бұрын

Dr350 in 2022. Is it a good bike Vs something like a crf?

@OFFroadOFFcourse Жыл бұрын

Performance wise, yes. Its perhaps better (more power, bigger and fully adjustable suspensions, 20kg less), but of course its not as polished (heavier clutch, carburettor, etc). Note: my dr is the SE version (electric start), and it has 6 gears, and so it is surprisingly smooth on the road (about the same cruise speed as the crf) I have both bikes (1x crf300 and 3x dr350se) so my opinion is not just theory (still just an opinion though)

@sergiotalves Жыл бұрын

👌👌

@lucianconstantin5819 Жыл бұрын

❤️

@AlexAlex-yu6jd 3 күн бұрын

Saved me 1600, I am shocked

@mabsbry1318 Жыл бұрын

You said ride the bike when all triple clamp bolts are loose! That is insane. Never do that. Tighten first, then ride, and if you need to realign more, start again by loosening. In fact, you only really need to loosen the lower clamp to align the forks, and it’s better if you loosen the wheel bolt. But never ride with all clamp bolts loose! Please correct your advice….

@OFFroadOFFcourse Жыл бұрын

I do appreciate the comment, but i dont mean completely loose, man! :P the screws are supposed to be only half a turn out. I explain that in the video. And by riding around i dont mean 80km/h on woops... Its just 10m to see if the bike feels straight or not. But i will try to edit that portion out...a lot of people are assuming the worst xD

@angeloreyes357 9 ай бұрын

Some idiot mechanic told me its probly the damn..t-post..thats why my forks and handle bar doesnt agree with each other..but i doubt it..then ive seen this..