How to Fix: Silverado 2500HD Front Suspension Rebuild (Link for rebuild kit in description⬇️)

No video

How to Fix: Silverado 2500HD Front Suspension Rebuild (Link for rebuild kit in description⬇️)

Рет қаралды 40,277

Жыл бұрын

#silverado #suspension #rebuild #balljoint #tierod #controlarm
Here is the link to the rebuild kit: amzn.to/3eKF53U
I show you how to rebuild the front suspension on a Silverado 2500HD four-wheel-drive pickup.
Disclaimer: please do not attempt anything you see in my videos without first consulting a professional and reading all applicable owners manuals, instructions, and product information manuals and labels. It is our recommendation that you perform all actions seen in these videos under the supervision of a licensed professional.

Пікірлер: 168

@jorgeleyva3939 3 күн бұрын

I have watched through out the process of my own truck’s suspension renewal many times. Thank you 😅 Continue!!!

@GrubNGas 3 күн бұрын

I’m so glad this helped, and thank you for the feedback! Have a blessed one, friend!

@sparkadaus Жыл бұрын

The love that radiates towards your wife makes this video. Thank you❤

@GrubNGas Жыл бұрын

Thank you so much…she’s a blessing, and I’m eternally grateful for her! Hope you have a blessed day, friend!

@JamesWright-ho9tm 15 күн бұрын

Great video - thanks for all the explanations! Shout out to all the wives that help out!!

@GrubNGas 15 күн бұрын

Thanks, friend! And yes, they are definitely a lifesaver!

@theelijahsanchez Ай бұрын

Thinking about doing this for my truck and was hesitant, watching you go through it has given me so much confidence and your energy is encouraging. Thank you for this video 👍

@GrubNGas Ай бұрын

You can do it, friend! Glad this video helped, and appreciate the feedback 👍💯

@theelijahsanchez Ай бұрын

@@GrubNGas I did forget to ask, how was the quality of the Detroit axle parts

@GrubNGas Ай бұрын

@@theelijahsanchez they were all pretty good. The upper control arms started to squeak, and with no zerk fitting I couldn’t grease them and had to replace one. Other than that, all good!

@theelijahsanchez Ай бұрын

@@GrubNGas okay okay awesome! Thanks again for a great video

@GrubNGas Ай бұрын

@@theelijahsanchez you’re most welcome! Thank you for the comments and feedback!

@jorgeleyva3939 3 күн бұрын

I love your video. It’s very detailed and edited speed when stepping obvious.

@GrubNGas 3 күн бұрын

Appreciate you much, friend! It’s comments like this that keep me going!

@delberth.atcitty9141 6 күн бұрын

Awesome video! It made my worries go away and I'm confident I can do my ball joint replacement.

@GrubNGas 6 күн бұрын

I’m so glad this helped! Hope you have a safe and successful repair!!!

@chip7522 Ай бұрын

You did amazing with this video. I have a 2007 LBZ with 154,000 miles. I’m traveling in retirement and I’m going to do this front end job next year. I’ll save this video. Thx again

@GrubNGas Ай бұрын

Thank you so much, friend! It means a lot that folks get value out of these videos. Stoked it was worth your time. Safe travels and God bless!!!

@user-ld7mv6li9j 10 ай бұрын

This one of the best repair videos I have seen. Great job!

@GrubNGas 10 ай бұрын

Thank you so much, friend! I really appreciate the feedback, and if you see anything that needs improvement, please don’t hesitate to let me know!

@jaybach240 Жыл бұрын

Great video thank you, I'm about to do the same front end rebuild on my 03 1500hd. Better then giving the dealership I'm guessing about 5k for parts and labor . I appreciate all the insights!

@GrubNGas Жыл бұрын

You’re most welcome, and glad this helped! Yes, it would be quite expensive to have a dealership do it.

@marksomma6169 10 ай бұрын

Just watched this video and thank you,I did just order the Detroit axle kit bit with the cv axels off of Amazon it was about 500 bucks.i should have it October 6th 2023 so next weekend.

@GrubNGas 10 ай бұрын

You’re most welcome, and I’m glad this video helped! Let me know how the job turns out:)

@user-zt4oj9ip3o Жыл бұрын

Bro what a joy to watch im so going to do the same with my 04' Avalanche Thank you sir

@GrubNGas Жыл бұрын

You’re most welcome, glad the video helped!

@bigredjohnson6921 Ай бұрын

Awesome job, I've done plenty of these and you my friend did it to perfection with great narrative skills. Regarding upper control arms, a quick tip is to spray paint the cams prior to removal, then on reinstall you just line up the cams where the paint marks are, that gets you close. Thanks for your time and effort.

@GrubNGas Ай бұрын

Thank you so much for the tip and feedback, friend!!! I really appreciate it because this old truck gets used A LOT so future repairs are an almost certainty:) Have a wonderful day!

@Malotortuga 11 ай бұрын

Everything I needed. Well explained. Thank you sir

@GrubNGas 11 ай бұрын

Really glad to hear this video helped! Have a great one and thanks for the feedback!

@steveaiello849 9 ай бұрын

Great video. I dig how you mentioned the size of the wrench/socket for each component.

@GrubNGas 9 ай бұрын

Thanks so much! Yeah, I thought it might help with tool inventory if a person was planning in advance.

@connorgardiner3781 6 ай бұрын

Bout to do the same thing and rebuild all control arms with new delco bushings/ oem parts. Thank you for the great video!

@GrubNGas 6 ай бұрын

Those OEMs are the way to go! Thanks for the feedback, and I’m glad you enjoyed the video:)

@themoneyflows8771 4 ай бұрын

that was so good im actually gonna subscribe! very in depth!!

@GrubNGas 4 ай бұрын

Thank you friend, I’m glad it was helpful!!!

@RLFinch33 10 ай бұрын

Excellent video brother--nice work keeping the FastForward a good amount of time while slowing it down when further info is needed. I'm.doing nearly this exact same job on an '09 Silverado 3500HD this coming weekend and I'll have you right there with me. Thanks very much.

@GrubNGas 10 ай бұрын

Thank you so much for the feedback, brother! I’m really glad this helped, and wish you the best success in your truck repair:) Appreciate you!

@coldspring624 Жыл бұрын

I feel better about doing the job now. Big thanks and I feel better about my left front tire.....it looks just like yours.

@GrubNGas Жыл бұрын

You’re most welcome, friend! You got this! Cool tire:)

@grndhg86d Жыл бұрын

Great video Sir. Thank you for making this and even more so, thank you for reminding me to be grateful to God during the entire process of the job.

@GrubNGas Жыл бұрын

Thank you, my friend! And amen Brother! Life can make us so jaded…I have to constantly be reminded to stop and thank Him!

@mrkelseykenny 4 ай бұрын

On my 1998 silverado I replaced both hub bearings, the rotor and hub bearings are held together with the 8 wheel studs on each side. Other than that this video was very informative thank you!!

@GrubNGas 4 ай бұрын

I gotcha! Thanks for the feedback, and I’m glad it helped!!! Have a great one:)

@richardsanders3523 8 ай бұрын

You, sir, know how to make an informative video. Thank you!

@GrubNGas 8 ай бұрын

Appreciate you much, friend! Glad it helped, and you are most welcome!

@wingnut6867 Жыл бұрын

Thank you for taking the time to make this video. I have to say that your explanations, editing, and speed video parts were great for getting to the point and showing key elements without a bunch of wasted BS video time! I am just getting ready to order a front-end rebuild kit from Detroit Axle, so this was perfect! Hubs were already recently replaced with Napa severe duty, so they're good. My 07 Duramax only has 120,000 on it, but my pitman and idler arms are toast, and the boots on the upper and lower ball joints are deteriorated... so I was gonna go ahead and get the kit with pitman, 2 piece idler, inner/outer tie rods, loaded upper arms, and lower ball joints. Also doing Bilstein shocks, and new drilled/slotted rotors and carbon pads at the same time. My truck sees as many miles towing a 17,000lb 5th wheel as it does empty! I have just a couple questions/ comments... I was originally thinking I'd completely disassemble and rebuild one side and then the other, vs. removing the whole drag link as an assembly and rebuilding it loose on the bench. Is it too hard to get the inner toe rods apart from the center link if it's still in the truck? I was wondering if that's why you removed it all together? Also, wouldn't it be easier to just put a floor jack under the end of the lower control arm and lift "slightly" to remove the shocks, vs. turning the torsion keys loose and having to try to "reset" the ride height of the truck? Just wondering if I was missing something! Oh yeah, I almost forgot to ask.... do you know if there's any way to determine if the truck has a 3 groove vs. a 4 groove pitman arm, without disassembling it first just to verify? Great video, and I'll be saving this to refer back to once I have all my parts! 👍

@GrubNGas Жыл бұрын

Thank you so much for your feedback, and taking the time to post such a well articulated comment. This one wins comment of all time! In retrospect, I would’ve removed the tie rods with the center link still in the truck. It was a PAIN to do it out of the truck. Also, yes, the floor jack lifting the lower control arm would’ve been easier. Sometimes my efficiency is not the best, lol! As for the pitman arm, I took a chance that the kit online would have the right one for the application. Probably not the best move, but they got it right. I genuinely appreciate your comment and insight. I wish you the best on repairing your 2007. These trucks are totally worth the maintenance!

@wingnut6867 Жыл бұрын

@Grub 'N Gas Right on! Thanks for the reply and the compliments! I respected your ability to clearly explain what needed to be done, and felt a concise reply with a couple legitimate questions would be worth the time.... and I was right! You da' man! 👍

@GrubNGas Жыл бұрын

@@wingnut6867 the feeling is mutual! Thank you for the comments and challenges to do it better:) Have a rocking awesome day!

@RLFinch33 10 ай бұрын

@@wingnut6867 Hello Sir... Jusf was reading your comments and replies here and I admit my mouth watered a little bit when I read the upgrades you had planned or already completed on your 3500HD. I've got an '09 that is going to need all of that itself but I'm afraid I won't be able to afford it all in one bunde. Wondering if you finusged up, and if you would mind sharing approximately what you ended up paying in totsl for the stuff you talked about in this thread. Ty both for fun reading as well. Im always a fan of wit over sarcasm anyday.

@auzzy89 2 ай бұрын

I'm about to do this on my 06 2500 as well. This video helped me realize the headache I'm in for since I'm also doing the control arm bushings. Great video and thank you.

@GrubNGas 2 ай бұрын

You’re most welcome, and yes, it’s a chore. You got this, though! Just be sure to keep those jack stands and extra safety precautions in place to keep you safe, friend:)

@auzzy89 2 ай бұрын

Got the 6 ton stands on the way and I'll do the tire trick as well.@@GrubNGas

@GrubNGas 2 ай бұрын

@@auzzy89 rock on! Here’s to your success! Appreciate the comments!

@bigredjohnson6921 Ай бұрын

Start spraying your torsion bars where they connect to lower control arms and keys with penetrating oil for a week or so before you start your job. That is going to be your biggest problem on disassembly, trust me.

@GrubNGas Ай бұрын

@@bigredjohnson6921 thanks for the info, that helps a lot!

@TheCorvetteBen 10 ай бұрын

Thanks for making the video! Just ordered my kit, which saved me a few $$ from buying something off rock auto.

@GrubNGas 10 ай бұрын

You’re most welcome, and glad this helped! Have a great one!

@cody6.6max 5 ай бұрын

How is ur kit doing now

@luisnaranjo4745 6 ай бұрын

Thank you brother. Great video!

@GrubNGas 6 ай бұрын

Thank you, brother! Glad you enjoyed the video and I hope it was worth your time:) Have a blessed one!

@adamscott4013 Ай бұрын

Subbed outstanding video, explained perfectly

@GrubNGas Ай бұрын

Thank you so much, friend! It helps to know the video met expectations 💯

@jimgrady7458 4 ай бұрын

That's a very well done video 👍

@GrubNGas 4 ай бұрын

Thank you so much! Trying to improve with each one:)

@FarmerRiddick Жыл бұрын

Yours is the best video I've seen, thank you! The only thing I'm doing different/ in addition, is replacing the lower arms as well. Other video's regarding that, is the torsion bars can be a bugger to remove! One thing I love about Chevy, is the design and parts stay rather consistent for many years! Mine is a 2008 6.0L 3500HD 4x4 DRW crew cab with a dump bed. Thanks again!

@GrubNGas Жыл бұрын

Thank you so much for the feedback, and I’m stoked this video helped! I’d love to have a dump bed one day, I’ll bet that comes in handy!

@GrubNGas Жыл бұрын

And yes, love the consistency of Chevrolet’s design!

@FarmerRiddick Жыл бұрын

@@GrubNGas I have a side business doing firewood here in south central Colorado. I can haul some two cords in the truck, or two in the dump trailer and one in the truck. The truck gets a lot of 4x4 action and a lot of off road action as well, in some extreme weather conditions. Otherwise the dually gets used for the farm. It hit 200k miles, and it was letting me know, "Hey! I need some extra TLC!" lol FYI, Kanati Trail Hog tires rock for the winter. I haven't had to chain up in some 3 years! That I found astonishing, as Dually's generally suck in the snow!

@GrubNGas Жыл бұрын

@@FarmerRiddick heck yeah, that’s good info to know! I’ll look those tires up when mine are worn out👍

@skaterman30 Жыл бұрын

I have to do this same job on my 04 2500. I could do it myself but I work so much I don't have time. Saving up to take it to the shop.

@GrubNGas Жыл бұрын

Totally understand that…it’s a time consuming job, no doubt.

@danieljohnston5306 7 ай бұрын

Gotta do mine soon. Thanks.

@GrubNGas 7 ай бұрын

You’re most welcome! Hope it helps!

@js1451 8 ай бұрын

Great video! You get to it. To the point.

@GrubNGas 8 ай бұрын

Thanks so much, friend! That’s what I’m striving for in each video. Appreciate your feedback!

@diquanwatts5961 9 ай бұрын

Amazing job here only thing I seen was tightening the brushing at while car is loaded

@GrubNGas 9 ай бұрын

Thanks for the feedback and the kind words! Have a wonderful day!

@Paletozo1 Жыл бұрын

Great video I’ve got a 05 LLY with 233k need to tackle this job

@GrubNGas Жыл бұрын

Thanks so much! Glad the video was of use to you!

@mecharenacorrupt1055 Жыл бұрын

Thank you, much appreciated

@GrubNGas Жыл бұрын

You’re most welcome!

@riccoronado430 4 ай бұрын

Great video by the way

@GrubNGas 4 ай бұрын

Thanks so much!

@a.f-body1vids655 8 ай бұрын

Awesome video

@GrubNGas 8 ай бұрын

Thank you, friend!

@carlosizquierdo3923 Жыл бұрын

Good job brother

@GrubNGas Жыл бұрын

Thanks brother! Appreciate the feedback!

@-loki-7727 6 ай бұрын

10:25 I have a 97 k2500 suburban and the ball joint directions said to point the fitting towards the inside of the vehicle. Well, you can see the relief in the control arm where you installed it correctly. Impossible to grease the fitting as per my directions. Such a little thing caused a big PITA. Wish mine come apart like yours did!!

@GrubNGas 6 ай бұрын

That sounds like a ROYAL pain! Sorry to hear this is such a headache. Maybe one day I’ll get a chance to work on a 90’s and catch it on film. I wish you all the best, and thanks for reaching out!

@00jonesin 3 ай бұрын

Hey brother, great tutorial! To the point step-by-step, clear camera angles and i feel the 90% "how-to-do" commentary and 10% banter/chemistry with wifey struck a good balance. Quick question. 01 Silverado 2500hd 4x4 and just recieved that same detroit axle kit and one thing that drew my attention was how not so heavy duty the upper control arms at least appear to me by comparison to whats on the truck just like the one you replaced in the video. So i was curious if its just a looks can be decieving thing or if it is just a lighter duty swap?

@GrubNGas 3 ай бұрын

Thanks so much for the feedback on the video! It was a lot of sweat making it, but worth it:) I too noticed the lighter upper control arms. I haven’t had any issues with them so far, but I did notice the non-greasable ball joints squeak on one side within a couple of months. If I had it to do all over again, I would have looked for uppers that have the zerk fittings. That’s my thoughts so far, hope that helps!

@jack0903 11 ай бұрын

Just finished up replacing ball joint tie rod ends, next year new control arms for the 3/4 ,plow truck.

@GrubNGas 11 ай бұрын

Heck yeah!!!

@jaysonmartin1448 Жыл бұрын

"My Lovely Bride" I refer to my wife as the MLB commissioner. I tell people, too many side projects and I get fined for out of contract play bt the MLB. Good stuff mate👍

@GrubNGas Жыл бұрын

Hahaha! I love that, will have to try that one! Happy New Year, my friend!!!

@jeffbonifield8981 Жыл бұрын

Thanks!

@GrubNGas Жыл бұрын

You’re most welcome, friend!

@condor5635 7 ай бұрын

Good vid ! I just did my suburban and it was a long job. Never understood the plastic insert with the single hole on the camber guide cams. That fixes the camber and eliminates the capability of adjusting the camber. Mine on had 2 plastic guides on drivers side only. Not sure why

@GrubNGas 7 ай бұрын

Yeah, that didn’t make sense to me either! Glad you got yours done!

@GrubNGas 7 ай бұрын

Thanks for the feedback!

@jocarr1791 Жыл бұрын

Thank you for taking the time to share this. I'm looking to do the same to my 2004 2500. How are things holding up for you? Any issues with these parts?

@GrubNGas Жыл бұрын

You’re most welcome, and thank you for commenting! So far, I’ve had really good service. One item in the list to get elsewhere is the upper control arms, as these are not greasable. Definitely get some that are greasable as one of mine started squeaking and I replaced it again.

@rayfan2034 Ай бұрын

Awesome video! Still kinda scared to try to tackle this by myself. But curious. How did the Detroit Axle parts hold up? Since this video was uploaded a year ago. Any update??

@GrubNGas Ай бұрын

Thanks for the feedback! You got this, it is a challenge! So far so good! Only one control arm started squeaking.

@joelhernandez-nd4tl 10 ай бұрын

God is good. Thank you for the great video!

@GrubNGas 10 ай бұрын

Amen, and you’re most welcome, friend!

@jamleakatandlyd 4 ай бұрын

Best video yet!! Thanks!

@GrubNGas 4 ай бұрын

Thank you so much, friend!

@David-yy7lb 4 ай бұрын

I rebuilt my front end to however I replaced the whole front end with a solid axle swap

@GrubNGas 4 ай бұрын

Now that is cool! I’d like to do that one day!

@David-yy7lb 4 ай бұрын

@@GrubNGas 🤙🏿👍🏿

@cody6.6max 5 ай бұрын

Ok man how well did this kit end up ?? I see reviews saying parts last two weeks to one year then some great price and worked well ?? I’ve used tie rods that’s it before but nothing else so I’m worried about quality but don’t wanna spend tons of money on other parts

@GrubNGas 5 ай бұрын

It’s a mixed basket. I had to replace an upper control arm within a year. Definitely spend the money for the greasable ball joints (upper). Other than that, it’s a mostly good kit!

@shannisgeorge 4 ай бұрын

How r the parts holding up , i was skeptical of detroit axle. From all the mixed reviews, so i bought different parts

@GrubNGas 4 ай бұрын

So far only one has failed. It was the upper ball joint and it started squeaking within 6 months, replaced it with a greasable one.

@christopherhendricks4369 3 ай бұрын

how is the Detroit axle ball joint holding up? Ive heard mixed reviews so far

@GrubNGas 3 ай бұрын

So far so good. The only issue I had was with one of the uppers, it started squeaking within 6 months. Since it wasn’t greasable, I had to replace it.

@K5MOB Ай бұрын

So what is the good, bad, and ugly on the Detroit Axle parts after 1 year of service. I am about to do the same job on my 2002 2500 and I am currently contemplating Detroit or Moog....

@GrubNGas Ай бұрын

Well, the good is, all my parts have held up great…the one outlier is that the non-greasable upper control arms start to squeak about 6 months in. My advice is to definitely get uppers that have zerk fittings. Other than that, it’s been a great kit. The Moog is better quality, but the Detroit has held up nicely for me…minus the squeaks.

@GrubNGas Ай бұрын

I replaced the squeaking upper with a greasable Moog.

@AnitaHandy65 11 ай бұрын

Hi there. How are the parts in this kit holding up? My 04 2500hd needs a front end refresh and im curious about how all the different kits hold up. Thanks!

@GrubNGas 11 ай бұрын

Good morning! So far, so good. I had to replace one of the upper a-arms because they were non-greasable and one started to squeak. But all in all, a good value.

@Ageman6058 9 ай бұрын

This is what I came to ask and I see my question is already answered. Can’t beat the price for the parts. Nice video… thanks.

@GrubNGas 9 ай бұрын

@@Ageman6058 thanks so much for your feedback, and glad this video helped!

@ryanbenge335 5 ай бұрын

anyone know the torque spec for those wheel bearings? i cant find it in the manual, and google is giving me a bunch of different specs. literally doing this same rebuild

@GrubNGas 5 ай бұрын

Here’s a good link to read: www.duramaxforum.com/threads/torque-spec-on-axel-nut.101522/

@BTTDwasc 7 ай бұрын

About how long did it take start to finish?

@GrubNGas 7 ай бұрын

I’m slow, but about 6-8 hours. And I was filming.

@gregspeth7910 Жыл бұрын

👍🏆

@GrubNGas Жыл бұрын

Thank you!

@Angelortiz-sf4zb 9 ай бұрын

How is the kit holding up? I bought mine recently but after looking at the reviews kinda makes me wanna buy moog parts.

@GrubNGas 9 ай бұрын

So far, so good. I’ve put a few thousand miles on the truck and it’s holding alignment, etc.

@leviwoodside4005 11 ай бұрын

How has the Detroit axel front end held up since you put it on there.?

@GrubNGas 11 ай бұрын

Still holding strong. Hoping to get some miles out of it:)

@leviwoodside4005 11 ай бұрын

@@GrubNGas I’m thinking about getting the Detroit axel kit myself.

@GrubNGas 11 ай бұрын

@@leviwoodside4005 it’s been a good purchase this far along. Hope it serves you well too!

@TannerRumping 24 күн бұрын

How are the parts holding up ?

@GrubNGas 24 күн бұрын

So far so good…just one control arm started squeaking.

@salvagerebuilds9071 Ай бұрын

How has the kit held up?

@GrubNGas Ай бұрын

So far, so good! One of the control arms developed a squeak, so I had to replace it with a greasable one. That’s the one thing I would change: I’d get two greasable upper control arms.

@stevenharvey1375 9 ай бұрын

What kit did you use for this job?

@GrubNGas 9 ай бұрын

Here’s a link: Detroit Axle - 8 Lugs Front Wheel Hub Bearing + Upper Control Arm w/Ball Joint Suspension Kit Replacement for Silverado Sierra 2500 3500 www.amazon.com/dp/B07RWQMQR8/ref=cm_sw_r_cp_apip_JS69kpaNdgIxa

@riccoronado430 4 ай бұрын

I now want an air chisel

@GrubNGas 4 ай бұрын

Hahahaha! Do it! Totally worth it!!!

@davidflores5783 Жыл бұрын

Are these ebay parts? And how did they hold up?

@GrubNGas Жыл бұрын

These were purchased on Amazon, and they’ve held up pretty well! The link is in the video description:)

@joelhernandez-nd4tl 10 ай бұрын

Would it matter if my truck is 2wd?

@GrubNGas 10 ай бұрын

Definitely check the part number for the kit, but most parts should be the same. You can plug in the 2WD parameter in the Amazon parts search.

@riccoronado430 4 ай бұрын

How are those parts holding up after a year

@GrubNGas 4 ай бұрын

I’ve only had to replace on upper control arm since..and that’s because it started squeaking due to no greasable zerk fitting.

@riccoronado430 3 ай бұрын

I went with the moog uppers. Let's see how hold up

@GrubNGas 3 ай бұрын

@@riccoronado430 I’ll bet they do well!

@not_dxnny4804 6 ай бұрын

How much did all that cost??

@GrubNGas 6 ай бұрын

About $325. Here’s the link to the kit: amzn.to/42dpcaZ

@flow1180 3 ай бұрын

I would have probably gave up and just went and bought the whole new set everything new lol

@GrubNGas 3 ай бұрын

I hear ya, lol!!!

@Lstrong8811 6 ай бұрын

Great way to ruin the sector shaft on the gearbox hitting it with a air hammer

@GrubNGas 6 ай бұрын

😳 Whoops!

@navigator185 Ай бұрын

You didn't show tighten the torsion bar. They are people who only understand seeing someone else doing the exact way.

@GrubNGas Ай бұрын

Ah good point…I might need to make another video showing that.

@navigator185 Ай бұрын

@@GrubNGas You did a good video to help others complete that task.

@GrubNGas Ай бұрын

@@navigator185 thanks friend! Appreciate the feedback.

@user-xd6tw4lu7v 3 ай бұрын

I am amazed you never pressure-washed the area you worked on , Detroit parts are not going to last , not watching whole video

@GrubNGas 3 ай бұрын

There was definitely room for improvement in this video. The Detroit parts have done fairly well so far, but time will tell. Have a great day!

@user-xd6tw4lu7v 3 ай бұрын

if had say a bench vice and some proper wrenches you wouldn't need to jack hammer your stuff

@GrubNGas 3 ай бұрын

This is true.