Remote control modification instructions - racingbrick.com/lego-technic-42111-dodge-charger-rc-mod-with-42095-plus-servo/

A small modification with a HUGE visual impact. Nice!

Third solution hands down, just finished my charger yesterday and without hesitation i used the mod, thank you so much!

I just raised it in the back, then the front and the whole car looks more aggressive and dope! I also put some spacers on behind the wheels so they stick further out :)

Thanks for the ideas! Also quick option for front suspension; remove the brown pin and lock it below the grey steering bar. Suspension will be almost nothing, but the wheels doesn't come down when you lift the car and don't need additional spare parts.

Thank you!! I just finished my second bag so I was able to do this mod in the middle of my build. Cheers mate!

Thanks for this! I realised that I already had the wheels too low however I wanted it to be in the normal position and this video saved me from hours of rebuilding

Thanks, great presentation and not forgetting humor! :)

You've got yourself a new subscriber with this video, I'm going out to the garage right now to do the final mod shown. Thanks for the guide!

Looks so much better, makes me want to buy the set now !

I'm making mine look like the off road charger from f7 with 4 wheel drive

It looks much much better. I bought this car after watching your video. thanks a lot

I love this video great solution!!!

That's an essential fix. Nice. 👍 Those mustang wheels somehow look appropriate now.

Another great video!

Love it, thanks for the instruction

Nice update 💪

I got this issue and it helped SOOOOO much

Having just got this set this was helpful thanks and an improvement. I also think if you flip the wheels around, they look better! Just procured the light set for it as well.

Thank you for fixing the Build these Tires look better

Excellent custom made. Very nice . Only new rims looks smaller for me.

I finally got one of these and definitely doing version 3 as I build it.

Im actualy getting this and in the images i googled i saw that problem so this is going to help

I'd just got this on Christmas and Iam done building it and thanks for the solutions

Very useful, if I will get this set for my upcomming birthday I will make those changes

Nice job!

Personally, I like the 3rd solution for the front wheels the most

Amazing bro thanks a lot!

Ill make sure to do this when i eventually get this set

WHAT? You don’t like the B-Model Charger “DONK” edition? You know LEGO and DUB magazine have been trying to find a good project to collaborate on for some time now right!😉🤣😂 But seriously, you nailed the stance with your modifications! Bravo 👏

Thank you!!

Really cool

Great video, I just started my build and just finished bag there, was going to do the rear, but apparently i put it together that way in the 1st place. accidental win.

Got my set on Monday and already did this upgrade

*lets do this without taking the car apart* takes the car apart lol. love your content you make your viewers so relaxed

LOVE IT

Looks way better!

Would love to find a way to lower the engine (removing the big air filter and chain mechanism) so you can make a full solid hood you can close close with no cut outs

I adjusted the front suspension attachment points. I moved the axle stop closes to the middle of the car and moved the shock attachment point to the closest to the tires. You have to shove something behind the axle while you reattach the wheels but it drops the front to the lowest and everything still works. Thanks for the video.

nice will do that man love ittt

I'm going to go with your third option and still have suspension at the front and sacrificing the slammed look slightly ;) Mustang wheels look ok but still bit small.

Looks much better.

All i did. For the front end was remove the brown axle that you put through the shock and spring and lifted the lower arm, slid the axle throw the shock, wedged under the arm and stuck the locking piece on the end of the brown axle, saves having to get additional pieces

I only did the back side and I like the look

Thanks i ordered wheels and got it the 3rd version my wife said it looks great i was surprised haha

I replaced all four springs on mine with pieces that function like the thin 1x6 beams (waiting for them to ship in) and I didnt notice any rubbing with the rear wheels. The charger looks so much better when lowered. I hated the monster truck ride height

I like the third solution the best and with the mustang wheels nice great vid by the way now I know what to do and could you do a video on making it a 1970 Daytona plz and thank you for the video

i love the newer stance

would really love to see a video on how to motorized it someday

Please do Porsche RSR next! I’m curious as to how you would go about it

Yep, looks miles better siting lower! I modified my Creator Beetle to make it sit lower and have it some proper modded Beetle stance. Videos are on my channel.

Hiya, love the video on this. Are you able to tell me the part numbers for the 3rd set up on the front suspension please. I think I’ll do that as it looks much better. Cheers 😉

I just tried this with my model, there was a noticeable difference when it was off the ground, but i think my suspension is not tight enough for it to actually make a noticeable difference when on the ground.

Yay it's 12 am in one hour for me which means it will be my birthday in 1 Hour, yayyyyy

i love thes car

Yes, your mod does make the car look better.

Good

Back then I only installed softer shock absorbers on the front axle. Due to the weight, it then goes down by itself. Steering is retained and when lifting the axle does not fall down as far as if nothing was in it. I didn't want to fix the axle with two 1x6 lift arms, there should still be some travel with the Technic model. I left the rear axle like that, now it has a nice wedge chassis. :o) I still installed side mirrors, closed the trunk floor a little more and extended the exhaust system (the pipes now go to the rear axle and then a little upwards, where you can no longer see the end), painted black rims. The bonnet and the bracket for the radiator grille, etc. I also changed something, because the two brackets in the radiator grille bothered me. Now there are no more to be seen. It is a pity that there is no sticker that is continuous without this recess where the brackets were.

Looks 10x better

Tried it on rear axle, but the shocks didn't work. They got bent when pushing the car down instead og flexing on the spring. Not a big deal for a display model, but I appreciate the functionality of technic lego.

Tökéletes! ha valaki szeretne egy chargert de nem annyira tuningolva mint a sorozatban (mert mondjuk nem szereti) akkor még kikapja a motor tetejét hogy fedje a motorháztető a motort és kész!

Much better.

Does anyone know where I can get those wheels at 5:53 They look better then the wheels that come with the car

this is compromise but a hella good one

I think it just needs thicker tires. Cause the slim tires just don't fit it.

I like dom 's dodge charge

uhhh i would not permanently compress the springs like that just to lower the front ride hight

There are also springs that are shorter. I think they’re blue

I’m trying to lift mine but keep the steering do you have any ideas for that

It looks better with the stock ride height

Please, put the engine from "42109" in it )

Can you possibly help me with my dodge charger set? my ram suspension is loose and not that stiff unless it’s a part for the car

Uhh is it ok if I don’t use the gray pieces cause I don’t have those but I have the long black one’s

I actually want lego to do the Supra from the original movie next!

getting there

I didn't know this existed

I had my stanced and wanted to make it normal, but my rear suspension is not like it was before i stanced it. I have done everything correct but does anybody know what i could have done wrong

I think charger donk doesn't look good, and that low suspension is quite weird for me, because in the movie, this charger does wheelie, so the suspension should be a little higher. That's just my opinion.

Hey can you help me with the Dodge Charger? I have problems to get the engine run freely. When I put the last part of the engine on its place the pistons get stuck (they dont have enough space to move). How do I fix that? Thats really bad cause as long as that problem is there I cant move on.

Hi Racingbrick! The video got really good and then you don’t make a video in which you also build a Toyota Supra? : D

It could be racked up but its better like this if u like low riders

it looks good but then its not Doms charger with a weird stance and to much spring like to movies

I just wish they had used thinner tires on the front like every other dragster on the planet

0:23 hahahahahahaha I actually felt the same way!!!

I just removed the springs

5:20 This is the way.

Honestly I prefer the charger with the old thick tires

Just put a softer spring on to make it sit lower

This guide show u how to make the car higher or lower?

Do those parts come with The Set That were used To Lower The Front Suspension ? The 2 Grey Bars ?

It’s supposed to be raked. You turned it into a low rider.

The Charger is just a poorly designed set all-round. LEGO cut corners on this model, not with pieces but with development, or lack thereof.

My suspension on the back doesn't really work, Do you have an seloution about that??

They did this car wrong they cut so many corners I want a redo with this in the LEGO creator style

why am i watching this, i dont even own this set, and i have no plans to either...

16th like for you+

I don't like it. I love it! I don't have it or I will but anyway,I like it

You should definitely try to motorise it!

Thanks,but the lego charger is still to short...

Are those mustang wheels being sold separately anywhere ? I really don't wanna buy a whole set just for some wheels 😭😭😭 what's the part number for them?