How To Fix Your Leaking Snow Blower Carb

How To Fix Your Leaking Snow Blower Carb - Briggs Or Tecumseh

Рет қаралды 151,683

4 жыл бұрын

Is your carburetor leaking or pouring fuel out of your carburetor on the air filter side or does it flood into your engine oil making the oil smell like gasoline? No matter what side it’s leaking from, it’s the same repair. Watch now to see how to easily stop your snow blower or snow thrower carb from leaking fuel.
This applies to almost all 4 stroke 4 cycle engines, with the float bowl on the bottom, on snow blowers, riding lawn mowers, walk behind lawn mowers, water pumps, generators, general purpose engines, etc.
This video ONLY deals with Briggs and Stratton or Tecumseh carburetors.
👍Please click the like button and tell me what you think of this video in the comments section below. 👇👇👇
✅Click here for a Briggs repair kit ➜ amzn.to/2XH3DhG
✅Click here for a Tecumseh repair kit ➜ amzn.to/2DdxIfr
✅Click here for a new float ➜ amzn.to/33mAABy
For more videos like this, check out:
👉How To Fix Your Leaky Snow Blower Carb - Honda Style ➜ • How To Fix Your Leaky ...
👉Fastest Way To Tell If The Crankshaft Is Bent On A Mower ➜ • Fastest Way To Tell If...
👉Here's Why Your Lawn Mower Is Leaking Gas - Honda Style ➜ • Here's Why Your Lawn M...
👉How To Adjust the RPM Speed on a Lawn Mower ➜ • How To Adjust the RPM ...
🔧WELCOME to the Steve’s Small Engine Saloon KZfaq channel! Here you will find a vast library of easy do it yourself repair videos for all types of small engine equipment like chainsaws, weed eaters, hedge trimmers, brush cutters, leaf blowers, lawn mowers, pressure washers, generators, riding lawn mowers and so much more. I have been a small engine mechanic for over 30 years and my videos are absolutely loaded with tips and tricks that I have learned and want to pass on to YOU. 🙂
👉SUBSCRIBE for more free repair videos ➜ / @stevessmallenginesaloon and don’t miss another video by turning on the bell notification 🔔
👉JOIN this channel to get access to perks 🤩 here ➜ / @stevessmallenginesaloon
⭐Members-only have cool access to badges, emojis and exclusive content as well as a way to help support the channel.⭐
You can connect with Steve here too:
✅Visit Steve’s WEBSITE ➜ www.stevessmallenginesaloon.com/
✅Visit Steve’s PARTS & TOOL STORE ➜ www.amazon.com/shop/stevessma...
✅Follow Steve on FACEBOOK ➜ / stevessmallenginesaloon
✅Follow Steve on INSTAGRAM ➜ / stevessmallenginesaloon
✅Follow Steve on TWITTER ➜ / stevesaloon
❤️Thank you for watching!! If I saved you some money with this video, please consider supporting my efforts with a donation ➜ www.paypal.com/cgi-bin/webscr...
💡If you have an idea or suggestion for a video, please fill out this form ➜ www.stevessmallenginesaloon.c...
If you choose to try one of the suggestions made in this video, you do so at your own risk. No information contained in this video shall create any express or implied warranty or guarantee of any kind. Any injury, damage or loss that may result from the improper use of tools, equipment or information contained in this video is the sole responsibility of the viewer and not Steve’s Small Engine Saloon Inc. Please ensure that you take all proper recommended safety measures before attempting any project. Steve’s Small Engine Saloon Inc. assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. As an Amazon Associate I earn from qualifying purchases.
#stevessmallenginesaloon #smallenginerepair #smallengine #repair #troubleshooting #engine #lawnandgarden #lawnmower #lawnmowerrepair #mowerrepair #carburetor #carbreakdown #mower #Tecumseh #briggsandstratton #snowblowers

Пікірлер: 438

@StevesSmallEngineSaloon 4 жыл бұрын

✅Click here for a Briggs repair kit ➜ amzn.to/2XH3DhG ✅Click here for a Tecumseh repair kit ➜ amzn.to/2DdxIfr ✅Click here for a new float ➜ amzn.to/33mAABy For more videos like this, check out: 👉How To Fix Your Leaky Snow Blower Carb - Honda Style ➜ kzfaq.info/get/bejne/hLpyn7mFxsXOdIU.html 👉Fastest Way To Tell If The Crankshaft Is Bent On A Mower ➜ kzfaq.info/get/bejne/adugaJp1rc-noac.html 👉Here's Why Your Lawn Mower Is Leaking Gas - Honda Style ➜ kzfaq.info/get/bejne/qtZmaqSrvLTGeWg.html 👉How To Adjust the RPM Speed on a Lawn Mower ➜ kzfaq.info/get/bejne/bb-idJaCqq-qnnk.html You can connect with Steve here too: ✅Visit Steve’s WEBSITE ➜ www.stevessmallenginesaloon.com/ ✅Visit Steve’s PARTS & TOOL STORE ➜ www.amazon.com/shop/stevessmallenginesaloon ✅Follow Steve on FACEBOOK ➜ facebook.com/stevessmallenginesaloon ✅Follow Steve on INSTAGRAM ➜ instagram.com/stevessmallenginesaloon/ ✅Follow Steve on TWITTER ➜ twitter.com/SteveSaloon

@davidbabcock1231 2 жыл бұрын

Steve is there a Way that the fuel could be coming out of both sides?? The air cleaner side and the engine side?? I see the gas leaking from the snow blower but when I did an oil change on it it looked to have some gas in the oil. I’m not 100 percent sure if there was but the oil seemed very liquidy and not as thick as when I put it in and it also had a type of sheen to the oil. I’m not sure if it could be both.

@seanboulter9848 9 ай бұрын

Steve, great video--loved the toilet analogy! It's the first time I've understood a carb float. Your link to the Tecumseh repair kit goes to an item that is unavailable though, FYI. Be great to get an updated working one!

@richardkenworthy9312 6 ай бұрын

Do all tecumseh carbs take the same needle and seat kits

@greyes701 3 ай бұрын

Would this cause oil out the exhaust?

@ryanmartin7522 3 жыл бұрын

Thank you for the fantastic tutorial, Steve! Great production with still, focused shots and thorough instructions!

@StevesSmallEngineSaloon 3 жыл бұрын

Very welcome!

@jmartin897 2 ай бұрын

For my first carburetor job I did Eagle Rare bourbon neat. Nothing against beer, I love beer, I just like to drink the good stuff when I can find an excuse to hang out in my shed and work on stuff at my own pace.

@carlw9009 7 ай бұрын

Grolsch was my go to beer when I was younger. Now I can’t find it in my area, (greater Boston). No matter I gave up all alcohol for health reasons but I do find your video very informative. Only thing I didn’t know was how to make sure the float is level after making the repairs. That is much appreciated and thanks for sharing your experience and knowledge with us! 👍🏼😎👏

@jeffreyrubish347 4 жыл бұрын

I limped my 25 year old Toro along all last season. Too cold for my arthritic fingers to fix. This spring cleaned the jets and passages, runs great again.

@dtomejr 3 жыл бұрын

Glad to have found this video! I kept thinking it was a gasket issue! Installed all ne carb and back up and running. Also bought the needle and seat repair kit to fix the old one as a spare...

@walterschilling4512 3 жыл бұрын

Steve, your the best! Whenever I'm in doubt, I come to your channel to resolve the issue , Cheers.

@StevesSmallEngineSaloon 3 жыл бұрын

Cool, thanks

@gnic76 4 жыл бұрын

Thanks Steve, I had that problem with my snow blower two weeks ago, when I went to check it over at start of winter. Had gas in the oil, it leaked past the fuel line shut off valve and through carb. I was trying to figure out how it would have gotten into oil. Now I know.

@wildefox1478 4 жыл бұрын

Great carburetor repair video Steve, when I fix leaky carbs to test the needle and seat I just use my mouth to gently blow into where the fuel line connects to the carb.

@tsdelaney 4 жыл бұрын

Right on the money! Thank you as this is exactly why the carb on my Briggs a generator was leaking.

@StevesSmallEngineSaloon 4 жыл бұрын

You're Welcome...

@keithpedersen2584 3 жыл бұрын

Thanks for the detailed video. Done well and professional! It was helpful even though I am working on a Toro1000. Leaking out this brass tube right next to the fuel intake. Thanks again!

@theajeff 4 жыл бұрын

Steve - you’re the greatest.

@StevesSmallEngineSaloon 4 жыл бұрын

Thank You...

@j.elliott4310 7 ай бұрын

Steve!! You have a gift for teaching! Thank you for going into depth with your explanations and analogies. The close ups are so helpful. Excellent tutorial!! 🙂

@StevesSmallEngineSaloon 7 ай бұрын

Wow, thank you!

@patrickhauser631 Жыл бұрын

This vide was exactly what I needed to fix my snow blower carburetor. Thank you for posting this!

@StevesSmallEngineSaloon Жыл бұрын

You're Welcome...

@charleslarue7082 4 жыл бұрын

I want to thank you Steve! I've used several of your videos to help fix so much of my equipment.. it's sad really. So thank you good sir, you've made some amazing videos. And as far as liquids to drink while doing repairs.. forget beer, captain and coke or jameson and 7up. you'll never mistake that smell for fuel or leftover fluids lol

@baddad5781 3 жыл бұрын

Thanks, one of the best carb/float videos on youtube I've ever seen. Thats why I'm a subscriber.

@StevesSmallEngineSaloon 3 жыл бұрын

Great to hear!

@RobKeenan826 4 жыл бұрын

Now I know Google is listening to me, was talking about leaky carb on my blower, this comes on recommendations. Thanks for posting

@kwedtc 2 ай бұрын

Thanks Steve, my snow blower has that problem, going to fix it.........Now it"s fixed.👍👍

@StevesSmallEngineSaloon 2 ай бұрын

Excellent!

@Windgumby 4 жыл бұрын

Grolsh works very well for me in this situation. Thanks.

@ilocke2007 3 жыл бұрын

great vid steve. I really appreciate the effort you put into showing exactly what you are talking about with the closeup shots. nice video work and editing.

@StevesSmallEngineSaloon 3 жыл бұрын

Thank You...

@BrucesShop 4 жыл бұрын

Always fun. Thanks Steve

@johnt890 4 жыл бұрын

Going to try on pressure washer this spring. Great tutorial

@crbourret 4 жыл бұрын

I've been having that exact issue with the Briggs carb on my log splitter, thanks for this man!

@StevesSmallEngineSaloon 4 жыл бұрын

You're Welcome...

@georgetaylor8535 4 жыл бұрын

Steve your always full of great small engine knowledge. I watch all of your videos they're great. You and your wife are an awesome team on making these video's. Thanks you guys i learn something from every video.

@StevesSmallEngineSaloon 4 жыл бұрын

Thank You...and You're Welcome...

@geyser3445 2 жыл бұрын

Was working on snowblower and felt something was wrong with the seat. Really didn't think using a compressor would blow out the seat but it worked like charms. Thanks.

@robc.5745 2 жыл бұрын

I know this might a little late in the game , But I had that problem with a tiller and a tecumseh engine and had to replace the float , Then it worked perfect. Steve , Your the man !

@raywalz4952 4 жыл бұрын

Saturated float...In 1976..on a 73 ChevVan...plastic coated opencell foam float in a Qjet 4barrel.. took apart twice...still flooded...third time noticed float was heavier than normal...replaced with used one from parts stash...set up level..reassembled...ran better than new. Thank goodness the hollow plastic floats that are used in small engines are better quality today. Best to you and yours.

@itself227 4 жыл бұрын

Don't really have a carburetor beer, but Yuengling is a good all purpose brew

@francofavot6761 3 жыл бұрын

Great video Steve! Your demeanor is perfect and being an old school professional mechanic myself the explanation and repair process is on point. Two thumbs!!

@StevesSmallEngineSaloon 3 жыл бұрын

Wow, thanks!

@brianmontello9074 3 жыл бұрын

Thank you! I rebuilt the carb on my 5hp Tecumseh about a week ago. I initially thought all went well and it started right up on 1 pull. 1 week after storing it I noticed a fuel smell in the garage and a puddle of gas. After watching your video I pulled it apart and checked the brass float. Sure enough it was filled with gas. I replaced the float and reassembled and no leak. It runs better than it has in at least 5 years. Great video. Thanks Brian.

@StevesSmallEngineSaloon 3 жыл бұрын

Great to hear!

@greendoorinvestments 2 жыл бұрын

air tip was great, thanks

@johngabrielson1969 3 жыл бұрын

Thanks -- So that float is how the gas is controlled. Nice and clear now.

@nickz8632 Жыл бұрын

Wow, this fixed my issue on a 15yr old snowblower that had a discontinued carb. I didn’t want to have to buy an updated carb and deal with all the things that I could see that were different. Cleaned a popped these new little bad boys in and pow, everything is 100%. This vid was sooooo helpful, Ty Steve! Help us regular foke fix like the pro’s

@StevesSmallEngineSaloon Жыл бұрын

Great job!

@zerohope6720 7 ай бұрын

Now i wanna drink beer and fix stuff!..very helpful.this vid is part of my research before i tackle my carb project( leaky carb/ craftsman 4 stroke)

@user-mb6gs3xm7b 4 жыл бұрын

Steve, i have a crafsman as secondary, bought used, always leaking, i will tackle next spring. Thanks all info. Happy holidays... Newburgh N.Y.

@tfishercanadianeh8738 Жыл бұрын

Like your beer warm Steve. Great video thanks.

@robertnick6403 2 жыл бұрын

Thanks Steve

@larry851 4 жыл бұрын

Great information my snow blower been leaking every time I prime it. I'm going to order the parts and a six pack of those special carburetor beers.

@robertnick6403 2 жыл бұрын

Thank you!

@Catttrain 4 жыл бұрын

I had this issue with my riding mower. Although I didn't realize at the time this was the exact same problem, I did get a carb kit and replaced all the little bits like this and that did fix it. Thanks Steve for so many great videos.

@StevesSmallEngineSaloon 4 жыл бұрын

You're Welcome...

@derrickmcdonald7331 3 жыл бұрын

Not sure that’s what my problem is, but I enjoyed the video thoroughly! Very educational and entertaining! Appreciate you going the extra mile to help those of us guys who are NOT mechanically inclined! Thanks again!

@StevesSmallEngineSaloon 3 жыл бұрын

Glad you enjoyed it!

@robertmoneypenny6028 4 жыл бұрын

Thanks for that. My beer of choice is James Ready a great Canadian lager.

@BearE9090 4 жыл бұрын

Great video. Carbs & OV gets the job done for me.

@gordonwright1602 4 жыл бұрын

Hi Steve, I also like my beer and to work on small engines,you are a great help to me and I admire you for your knowledge about whatever it is that you might be working on. Please keep the great videos headed my way.

@StevesSmallEngineSaloon 4 жыл бұрын

Right on Gordo...

@simonkenton5927 3 жыл бұрын

Thanks as always Simon

@StevesSmallEngineSaloon 3 жыл бұрын

My pleasure!

@tab_nebraska235 Жыл бұрын

Great video, Steve. Thanks much!

@StevesSmallEngineSaloon Жыл бұрын

No worries!

@eilertvonaswegen1958 4 жыл бұрын

Hi Steve, My Makuni carb on an fb460v as22 is similar to the one you repaired. I removed all components, cleaned cleaned everthing, assembled it and in the end, I could not get fuel into the bowl. I'll get a Het Anker Ambrio from the fridge and go and check everything again, following your guidelines. Thanks for your great video. NEVER let your camera-man go! Greetings from your Belgian fan.

@neilcrompton3488 4 жыл бұрын

Seems like a easy fix @steves small engine saloon keep up the good work,your teaching style is easy to follow & no nonsense or bs brilliant 😉😉

@StevesSmallEngineSaloon 4 жыл бұрын

Thank You...

@paulstir 4 жыл бұрын

Steve Scotland loves you for your videos , as a noob to small engines the toilet explanation has helped me understand how the mechanics of the carb works ( forever great full for you sharing your knowledge 👌)

@StevesSmallEngineSaloon 4 жыл бұрын

Right on Paul! Thank You...

@paulstir 4 жыл бұрын

Your welcome Steve , keep the vids coming 👍 , thank you

@khalidromman1702 9 ай бұрын

thank you, I had the leak all over the snow blower. I would go and change the carburetor.

@howardkoster4026 4 жыл бұрын

Ahhh...I had an old Sears lawn vac with a Clinton engine on it that flooded a lot towards the end. I junked it because of that, and a lot of other issues it had. The chassis were the engine bolted on had broken away, so the engine was only holding on by one bolt..GREAT VIDEO!!!!

@lessage760 5 ай бұрын

Thanks Steve dealing with this now thought I had it fixed this summer now snow is here and oh no hahahah

@rawkinrobn Жыл бұрын

I am absolutely horrible with engines. You have saved me so many times it embarrassing. Thank you

@StevesSmallEngineSaloon Жыл бұрын

You're Welcome...

@369SkinneR Жыл бұрын

[Québec, Canada] I already understand the concept of a float and seat.. but the way you explained it gave me way more insight and less guessing of what does what. TY. Im subscribing to your channel Awesome video

@StevesSmallEngineSaloon Жыл бұрын

Great to hear!

@fransiscoscaramanga674 3 жыл бұрын

i have a troybuilt 5.5 h/p snowblower leaking fuel from carburetor..........very good video, very informative, i think i can tackle this project.. you made it simple to understand. good job brutha...

@StevesSmallEngineSaloon 3 жыл бұрын

Yes you can!

@Stevenheiny 2 жыл бұрын

Worked like a charm! I didn't have a beer since my son was with me but...while we were working our neighbor stopped by with a plate of cookies. Fantastic!

@StevesSmallEngineSaloon 2 жыл бұрын

Good stuff!

@kstickak 7 ай бұрын

That’s a perfect video. Thanks.

@StevesSmallEngineSaloon 7 ай бұрын

You're welcome!

@87GP400 3 жыл бұрын

Thank s Steve, very good info !

@StevesSmallEngineSaloon 3 жыл бұрын

You are very welcome

@suggestedusername6662 Жыл бұрын

You the man, Stan 👌🏻

@StevesSmallEngineSaloon Жыл бұрын

Thank You...

@michaelgoostree4177 7 ай бұрын

Perfect video. Exactly what I needed! You've got yourself a new sub.👍

@StevesSmallEngineSaloon 7 ай бұрын

Awesome, thank you!

@toddhurley1237 2 жыл бұрын

hey. was just cleaning carb on my snowblower, put it back together and it was leaking gas bad ,watched this video and when i was blowing out the gas intake, i DID blow that seat out on the floor but didnt know it.works fine now....thanks... just subb

@StevesSmallEngineSaloon 2 жыл бұрын

Great job!

@winstonclarke9221 4 жыл бұрын

Excellent thinking, Stevie, Great Video.

@StevesSmallEngineSaloon 4 жыл бұрын

Thank You...

@Leonardokite 4 жыл бұрын

10:44 Good job, I could indeed hear the sloshing! Hard to imagine that plastic wins! I guess in the right application!

@bruceburton3515 4 жыл бұрын

Good job Steve. I have used a small self tapping screw to remove the plastic seat. Just scew it in gently with fingers only until it feels tight and remove the seat with rhe screw. I think the Grolsch is an excellent choice for this job. Cheers!

@davidrobbins1172 2 жыл бұрын

Probably the best video I have seen bar none on small engine repair. If my knowledge of engine repair was dynamite you could not blow your nose with it and I understood every bit of that video. Thank you so much.

@StevesSmallEngineSaloon 2 жыл бұрын

Wow, thanks!

@IndianHemlock Жыл бұрын

Thanks Steve !! Having this exact issue !! Thanks for the how to video ! I think I will order the parts and have a Pabst blue ribbon when I fix it ! Cheers 🍻

@StevesSmallEngineSaloon Жыл бұрын

Good luck!

@roygiehtbrock9124 3 жыл бұрын

I normally stay away from task like these! But your video makes it look easy. I found the information on how to order the needle and seat. Thanks for your help.

@StevesSmallEngineSaloon 3 жыл бұрын

You are so welcome!

@roygiehtbrock9124 3 жыл бұрын

@@StevesSmallEngineSaloon well today I took off the carburetor and found that I have the brass float HMMM Then I couldn't find the hole on the underside to blow out the seat you talked about so I put it all back together. So it wasn't as easy as you made it to look like. HMMM I'M STUMPED

@dufreebell 3 жыл бұрын

Thanks a ton for this informative video. Instructions are crystal clear and useful.

@StevesSmallEngineSaloon 3 жыл бұрын

Glad it was helpful!

@tehaysli Жыл бұрын

Steve, perfect tutorial. Thank you

@StevesSmallEngineSaloon Жыл бұрын

Very welcome

@gravelyman 4 жыл бұрын

I hold my thumb over the seat hole and blow through the inlet. Yes it hurts lol. After I install seat I hold the carb upside down and blow through the inlet with my mouth. Great video Steve 👍

@malcolm.cfittis1062 2 жыл бұрын

That was the easiest explanation, hands down. Its been a long time since I was in high school ( where I learned small engine repair) your video shook lose that information. I personally like to repair with Maclays ale .........works every time.

@StevesSmallEngineSaloon 2 жыл бұрын

Glad it helped!

@rkroz4005 2 жыл бұрын

Very Helpful lesson. Thanks!

@StevesSmallEngineSaloon 2 жыл бұрын

You're very welcome!

@brianstitt4161 Жыл бұрын

Thanks Steve. You're a big help and I drink a Budweiser or at times a good bitter IPA .

@FreedomAlchemy 2 жыл бұрын

Good stuff. I'm going to give it a go.

@StevesSmallEngineSaloon 2 жыл бұрын

Good luck!

@Morning-Star1975 3 жыл бұрын

Loved the video thanks.

@StevesSmallEngineSaloon 3 жыл бұрын

Our pleasure!

@1903bretep 4 жыл бұрын

Steve: another great video many thanks.

@StevesSmallEngineSaloon 4 жыл бұрын

You're Welcome...

@tobytollefsen8802 3 жыл бұрын

AWESOMME VIDEO. i LEARNED AND SAVED ALOT

@StevesSmallEngineSaloon 3 жыл бұрын

Glad to hear it!

@tomschisler1545 4 жыл бұрын

Great information as always. i find keystone by Coors always makes these jobs easier. thanks steve

@arthurfricchione8119 4 жыл бұрын

Great video Steve. Have two carbs to do that on. Thanks much. 👍👍👍

@StevesSmallEngineSaloon 4 жыл бұрын

You're Welcome...

@jimo2983 4 жыл бұрын

Wow! Steve had to wait to the very last second to have a drink of beer. You're working too hard Stevo!

@liujw0able 2 жыл бұрын

Thank you Steve for this great video, especially the part you explained with toilet flushing. After understanding how the float and needle works, I was able to pinpoint the mistake I made last time after I cleaned carb. The floater was upside down (yah, stupid). As soon as I put it back and tested it, the snowblower is not leaking gas anymore.

@StevesSmallEngineSaloon 2 жыл бұрын

Glad it was helpful!

@marklawson8346 4 жыл бұрын

Your the man thanks Steve for the video 👍🏻

@StevesSmallEngineSaloon 4 жыл бұрын

You're Welcome...

@darellsunderlin4670 4 жыл бұрын

Steve there were some older Briggs with brass floats , and you should mention a lot of the Tecumseh carbs had a high spot & a low spot in the bottom of the fuel bowl and it has to be put on correctly or it won't allow the float to come down. I have also repaired many brass floats by putting them in a cup of boiled water & held it completely under the water , and then you should see bubbles come out . Then you can Mark it , clean it & solder it .! :-) hope that helps someone too.

@allanpeters596 3 жыл бұрын

My problem is obvious .... Wrong beer! My bad. Great video. Thanks for the info. Makes sense. My carb has an adjusting screw in the centre of the bowl. Going to order the rebuild kit and repair.

@jnh5462 2 жыл бұрын

Great explanation!

@StevesSmallEngineSaloon 2 жыл бұрын

Thanks!

@tonyreed9810 3 жыл бұрын

Thanks for the info Steve! Have a chraftsman blower leaking needs work this helps!

@StevesSmallEngineSaloon 3 жыл бұрын

Good luck!

@oskarandradev147 7 ай бұрын

Well explained thanks

@StevesSmallEngineSaloon 7 ай бұрын

You're welcome

@mikeadams2339 7 ай бұрын

Thanks! Good info,.

@StevesSmallEngineSaloon 7 ай бұрын

You're Welcome...

@superdaddio3583 4 жыл бұрын

Thank you, that is exactly my symptom.

@StevesSmallEngineSaloon 4 жыл бұрын

You're Welcome...

@ronsilva516 4 жыл бұрын

Extent info just the key I was looking for my snow blower doing just that! It’s a Tecumseh engine on it . Thank you so so much for putting this info out now As for beer I think blue moon or shock top will do !😁😁😁😁

@StevesSmallEngineSaloon 4 жыл бұрын

Right on Ron...

@marksullivan4180 2 жыл бұрын

Great video. I'm pretty sure mine has a bad float. But I'm going to replace the 25 year old needle/seat also. Thanks.

@siryarwammowray3445 3 жыл бұрын

Excellent video thx exactly what mine needs

@StevesSmallEngineSaloon 3 жыл бұрын

Glad it helped

@MrGrimsbonian Жыл бұрын

Cheers 🍻 thanks fornthe info

@StevesSmallEngineSaloon Жыл бұрын

You're Welcome...

@cameronwebb3959 4 жыл бұрын

Great video thanks for sharing

@StevesSmallEngineSaloon 4 жыл бұрын

Thank You...and You're Welcome...

@michaelmurad1489 5 ай бұрын

Great video thanks man 👍

@StevesSmallEngineSaloon 5 ай бұрын

Thanks for watching!

@DouglasUphoff 4 жыл бұрын

Awesome Information! Thanks

@StevesSmallEngineSaloon 4 жыл бұрын

You're Welcome...

@faisalbashir9842 2 жыл бұрын

excellent , great video, mine was leaking into the engine side and into the oil sump. thanks .

@StevesSmallEngineSaloon 2 жыл бұрын

You're welcome!

@splash5974 4 жыл бұрын

Hey Steve, recently changed a needle and seat on a flooding Tecumseh carb. Next morning there was a nice pile of gas under the snowblower where the gas leaked out of the carb overnight. Checked to make sure everything was seated right, then noticed the plastic float was full of gas! Could hear it sloshing around. I needed the blower right away, so i drilled 2 tiny holes in the float to empty it out. Figured out that the floats are 2 piece units that have a seam running down the middle. Thats where it was leaking fuel inside. So i took my plastic welding gun and re-melted the plastic in the seam area and the 2 holes, and reinstalled. So far its holding up great! Lol Next time i see gas again, i will order a new float. But yes, the plastic ones can get full of gas inside them! Cheers