How To: Heatstain your Exhaust

Рет қаралды 148,537

Күн бұрын

Visit my Webshop for lots of the tools paints and other products used in the video!
✖www.thescalemodelingchannel.com/
Other useful links to products i use are further bellow
✖ Want to support the channel, become a channel member or Patron!:
/ @thescalemodelingchannel
www.patreon.com/thescalemodel...
✖My Amazon shop for US viewers: www.amazon.com/shop/thescalem...
My Workbench:
www.hobbyzone.pl/
My airbrushes and setup:
2 Bar(28PSI) 0.5mm needle
Mr Hobby Ps-290 Airbrush:
amzn.to/3v4Gt56
Grip for PS-290:
amzn.to/3uWiqFH
I use a Eurotech 20A Aircompressor
A Spray booth i recommend:
shorturl.at/gvDV1
amzn.to/2yp5T25
Number 5 Paint:
shorturl.at/ktAT4
Streetblisters Paint:
shorturl.at/hsMVY
General Tools:
shorturl.at/szCQ4
amzn.to/3lAT4ZJ
amzn.to/2xGdDOB
Sanding sticks:
amzn.to/3cVCCPJ
amzn.to/2l1FWOV
Tape:
shorturl.at/bnsJ7
amzn.to/2xGHWQk
amzn.to/2yplZZE
amzn.to/2ypqUKa
amzn.to/2yp9IEH
amzn.to/3cXgowQ
amzn.to/3c8MmXL
amzn.to/3f4uM8X
amzn.to/3r8sTL3
Tape with plastic sheet: amzn.to/3c8MKWj
Knife:
amzn.to/2xGMvz4
amzn.to/2ypq3sT
amzn.to/2yxGC6J
Tamiya Weathering Set: amzn.to/2Aj0n07
Flush Cut Pliers: amzn.to/2xHd6qQ
Cutting Mat: amzn.to/2znJ0dT
Glue:
shorturl.at/nFOUW
amzn.to/2Pgofx4
amzn.to/2NFHgsD
amzn.to/2zb0jhg
amzn.to/2za8KJX
Respirator: amzn.to/2yn8rfA
Gloves: amzn.to/394jFcv
Tweezer:
shorturl.at/bfyLS
amzn.to/2hIxj9F
Brushes:
shorturl.at/kmyI6
amzn.to/2xG77r3
Decals Solutions:
shorturl.at/quzQ3
amzn.to/2ylIPzQ
amzn.to/2ypuRP7
Panelline scriber:
shorturl.at/xVX19
amzn.to/2hGDElS
amzn.to/2gXsrOl
amzn.to/2JmKDRH
amzn.to/2Lxp1if
amzn.to/2MbulJl
amzn.to/2Mb9cyI
amzn.to/2M6vu4V
Permanent markers:
amzn.to/2zptYoa
amzn.to/2z8WREd
amzn.to/2zFEgjS
Sanding & Polishing supplies:
shorturl.at/dftxN
amzn.to/2xGMKtY
amzn.to/2xPVsq8
Spray stand: amzn.to/2z9Y2D9
Parts holders:
amzn.to/3c6HDpi
amzn.to/3f2GbGD
Panelline accent color:
shorturl.at/fuNS9
amzn.to/2xGB7OA
BMF: amzn.to/2EYoP8k
Proxxon Micromot 50E: amzn.to/2H4D7cw amzn.to/2HemhFE amzn.to/2uNDGlQ
Hand Drill/Pin vice:
www.thescalemodelingchannel.c...
www.thescalemodelingchannel.c...
amzn.to/2IwW58I
Hole Punch:
amzn.to/2ELyvTk
amzn.to/2IQJMEf
amzn.to/2EOL944
amzn.to/2GYgbwa
In my videos I'm showing all sorts of tips and trick about model car building. I do tutorials( how to's ),model kit builds, unboxing reviews and all sorts of other scale model related stuff.
If you have any suggestions or questions at all just post a comment or email me at info@thescalemodelingchannel.com
Also don't forget to like us on Facebook & Instagram for project updates and news.
/ thescalemodelingchannel
/ thescalemodelingchannel
Music copyright ® by KZfaq Audio Library
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites

Пікірлер: 80

@Toppervision1 9 жыл бұрын

Outstanding result! Thanks for taking the time to show us.

@MrMinidreams 9 жыл бұрын

Another great and useful video. Keep up the great tips

@tylermartin6963 3 жыл бұрын

Awesome job, I honestly thought it was going to be more complicated to heatstain the exhaust but you sir have given me some faith in myself, thank you!!

@Homerlovesbeer2 9 жыл бұрын

Thanks mate, your tutorials are an excellent tool and look amazing. Keep them coming!

@truefilm1556 7 жыл бұрын

Great work! Well it's really hard to nail that look, because it's so familiar. I remember (especially from bike exhausts, two stroke) the colors change a bit more randomly, are less saturated and the colors don't blend that smoothly in certain places. It looks to me similar like that rainbow effect of gasoline or oil on water puddles. A similar challenge is also a certain type of galvanized metal. It has those colored smears which are very typical. Not an issue in 24th scale though. Thanks for sharing your tips!

@leomorse7605 9 жыл бұрын

Amazing stuff!! Keep it up!

@WhatIsKenDoing 9 жыл бұрын

Nice tip! Thanks for sharing

@pturley84 9 жыл бұрын

Great tutorial

@renestofregen4048 3 жыл бұрын

Building a Nissan Skyline so this is a great video. Thanks for the tip👌

@petermotta1623 4 жыл бұрын

Thanks for sharing !

@Dockernan1977 2 жыл бұрын

Awesome! Thank you brother!

@rickyedison5151 5 жыл бұрын

Had No Idea How It Was Done WOW I Will Practice This........WOW

@mrupscale Жыл бұрын

Awesome Thanks!

@alexeyermakov7958 5 жыл бұрын

Like before watching))

@andrewhartley9305 2 жыл бұрын

Great work just 2 questions did you thin down the clear paints for the airbrush? The other one is how long did you wait before airbrush the next colour and so on make it look so easy excellent work 👍👌

@stevewatts3502 9 жыл бұрын

When the blue went on it was like alchemy, before that, I was going "What the blinkin' heck's he doing?" lol, nice one, Always been a bit of a tentative exhaust effects guy, maybe it's time for a more 'balls out' approach... inspirational stuff, ta K)

@fordman1956 9 жыл бұрын

LOOKS SO REAL. I like the look , a lot. Thanks......jim

@emericaskater1940 4 жыл бұрын

Not sure if you mention this in another video but what brush setup are you using?

@koncreteto2758 5 жыл бұрын

brilliant

@menetric12 7 жыл бұрын

Is there another to do this without airbrush?

@serbiamodelkits3291 5 жыл бұрын

Hello great tips.Maybe try it instead yellow color with bronze 😉

@rickgregory9616 Жыл бұрын

I'm going to give this a try. I'm building the Fast & Furious Dodge Charger form Fanhome and thought this would be a great modification. I figure it's safe for a first timer: If it turns out great - Its bragging rights. If not - no one will know unless the car is turned upside down. And how often will that happen! 😅 I might kick it up a notch by cutting small strips from a Coke can to hide connecting joints - paint them to simulate a welding point.

@braydenwalker9706 9 жыл бұрын

Hi thanks for the tutorial i have always wanted to try this but didn't know how. Btw will tamiya acrylic paints work or only the enamels? Also what thinner (if required) would be best to use?

@TheScalemodelingChannel 9 жыл бұрын

Brayden Walker I just used these as i had them laying around for way to long. You can pretty much use any brand or type of paint as long as its a clear color(or candy). Use the apprpriate thinners for the brand. Tamoiya acrylic has its own thinner from Tamiya. Pretty much every paint brand has its own complete system with thinners and cleaners etc.

@hermanuijthof8552 9 жыл бұрын

Great video, I have done this too, but at the end I sprayed some deluted smoke to softner the colors. Keep on going up with this usefull videos. Maybe you can make a tutorial how to make racing seatbelts?

@TheScalemodelingChannel 9 жыл бұрын

Herman Uijthof Will do that on an upcomming project, though that might take a while, Thanks!

@sondreolsen6725 7 жыл бұрын

The Scalemodeling Channel haha you hold what u promise

@speedyxd527 8 жыл бұрын

injects you a color to the other without break ? is the color of diluted tamiya ? have you ne exact description in German , perhaps?

@czondag 4 жыл бұрын

Which pistol do you use?

@swish-1223 9 жыл бұрын

hello TSC, 1st really nice work on all your builds....I really love the paint jobs....I just started using a airbrush for my builds.....the application is so much better than spraying from a can. My question is where did you get that spray booth? or did you build it yourself.

@TheScalemodelingChannel 9 жыл бұрын

I got it from Zero paints. But it has been sold out for over a year now. But there are a lot of other options out there if you search airbrush spray booth

@neckissue334 9 жыл бұрын

Hi... I love ur channel!...its really helpfull for noob like me... Haii from indonesia. I want to ask,witch is better..enamel or acrylic? Thanks

@TheScalemodelingChannel 9 жыл бұрын

Enamel is stronger(harder) and can resist scratches better. But it takes longer to dry. Acrylic dries fast and is better for your health. But a lot easier to scratch.

@DanR57 8 жыл бұрын

Cool ! I will try this... Transparents colors need to be dilute?

@TheScalemodelingChannel 8 жыл бұрын

+Daniel Roger some do others don't depends on the paint used and your personal prefference

@sasho89 3 жыл бұрын

Cheers for the tips, I'll be doing this tomorrow and wanted to ask what kind of drying times you leave before changing to the next colour?

@TheScalemodelingChannel 3 жыл бұрын

Couple minutes

@sasho89 3 жыл бұрын

@@TheScalemodelingChannel cheers!

@parascalemodels 8 жыл бұрын

What paint booth are you using? Cheers in advance.

@TheScalemodelingChannel 8 жыл бұрын

Sparmax

@hitoshiwar 6 жыл бұрын

Paint list?

@n3f2r80 9 жыл бұрын

Can I use Vallejo Air instead of buying the Tamiya ones?

@TheScalemodelingChannel 9 жыл бұрын

If they have transparent Colors sure!

@FS-wl6uo 7 жыл бұрын

Are these acrylic paints? For these small parts, you always need to user primer on the pieces so the paint can stick better?

@TheScalemodelingChannel 7 жыл бұрын

These are enamel paints, you could use clear acrylic paints aswell. No problem. Primer is advised if you ask me.

@FS-wl6uo 7 жыл бұрын

Subscribed to your channel! Thanks! Will follow your tips, I am new to the hobby.

@henryprophete4879 8 жыл бұрын

what was the needle size you was using in this video? i know is been awhile

@TheScalemodelingChannel 8 жыл бұрын

0,2

@rickgregory9616 Жыл бұрын

Ok, so I'm about to do this tomorrow - but questions. (I'm new to airbrushing) The shaking. I get that its due to very little paint in the cup, but how many drops there abouts did you add to the cup, and wouldn't that little cause splattering? In terms of adding very little color to the part, why not just further away from the part with quick strokes?

@TheScalemodelingChannel Жыл бұрын

The further away, the wider the spray

@rickgregory9616 Жыл бұрын

@@TheScalemodelingChannel Thanks. I completed part of the exhaust - and though I may have overdone it a little, I think it turned out great. From a normal distance, it looks good. Thanks for the tips!

@derekburnett2728 8 жыл бұрын

Did you thin your Tamiya paints any?

@TheScalemodelingChannel 8 жыл бұрын

+Derek Burnett Yes, though i have no idea how much, i just kept adding thinner untill it went through the airbrush.

@derekburnett2728 8 жыл бұрын

The Scalemodeling Channel Okay great. I did a lot of interior parts the other day and basically mixed it 1:1. Had great coverage, no runs, but I did have to shorten my trigger stroke because it was coming out really heavy. I'm used to seeing a huge fog from a real gun doing automotive panels so it's a bit of a learning curve for me. So far so good though.

@flyingchicken33 9 жыл бұрын

I love it!! Great work! I know Tamiya Paint is not really air brush friendly. Did you use any thinner?

@TheScalemodelingChannel 9 жыл бұрын

Yes i did, otherwise it would not have gone through the aibrush ;) i used terpentine to thin it down. Wich most likely was not the correct one to use, but it worked :)

@flyingchicken33 9 жыл бұрын

What i was meant to say was, what was the ratio with paint to thinner?

@TheScalemodelingChannel 9 жыл бұрын

flyingchicken33 I just did it by feel. Added some more tested it and so on untill it went through the airbrush. Some colors needed more then others.

@ELPModelling 9 жыл бұрын

The Scalemodeling Channel It's funny really, I was thinking yesterday "I wonder if I can airbrush Tamiya clear colours without thinning", thanks Tom!

@TheScalemodelingChannel 9 жыл бұрын

ELP Modelling Well, some can, but the ones i used where old(very old) so these could not be sprayed without thinning. The ones in the bigger circular bottles can in most cases be airbrushed straigh away without thinning.

@thatswhenireachformyrevolv3595 7 жыл бұрын

can i do this with spray paint?

@TheScalemodelingChannel 7 жыл бұрын

WLFZBNE no. Only with an airbrush

@x3mperformace 8 жыл бұрын

Not to spoil your tread. But what you do here is a discoloration af titanium exhaust, NOT a standard iron tube exhaust as on the model. Well, the exhaust tips, are ok to do this with, but the standard exhaust dosn't get discolored after the header, it just get's rusty. It makes a more belivable model to use rust colours on all the "joints" of the exhaust, edges on the mufflers and like. That gives a much more realistic look. Normally i would use vallejo rust Air color, and some rust pigments, since the iron tends to swollow up where it rusts. You did a good job, but on the wrong subject.

@TheScalemodelingChannel 8 жыл бұрын

+x3mperformace If i was replicating a stock steel exhaust, you'd be correct, though i'm not. I am trying to give it the look of an aftermarket titanium exhaust: www.motorworldhype.com/wp-content/uploads/2008/11/amuse_gtr_exhaust.jpg

@PanzerChicken69 8 жыл бұрын

+The Scalemodeling Channel The effect is just wayyyy to much.

@overreactivecas 7 жыл бұрын

May I know what model was used for this video??

@TheScalemodelingChannel 7 жыл бұрын

Aoshima R35 GTR

@overreactivecas 7 жыл бұрын

alright thanks!

@JoeL-yf4ee 5 жыл бұрын

I find that the welds rust more so the heat is harder to see unless your work is done for a newer car... But then this to me is over done at least for my taste. I been a Mechanic so I have seen many cars on the lift. If this work had been a third less to look this way I would of giving you an A... lol Nice work over all...