I thought I bought the dry clean washer by mistake. After 5 years today I found your video. Now I have regular washer machine thanks. :)))))

Who the heck decided for us that all washing machines should have stupidly low water levels.

Very helpful finally I can wash with enough of water, I was going to get rid of this machine finally got the fix thanks dude for the video

Thank you for this video. All these while I've been adding extra water manually using jug via the drawer. I hope there is no adverse effect on the machine.

OMG you're a money saver. Worked like magic. Turned it 3ce. I guess I'll have to reduce it because it seems water is too much now 😁. I love it

I have this same washer. If only I didn’t have the dryer sitting on top of mine I would do this. But if I ever need to open it up for repairs, I’m definitely doing this. The minimal water lever in these things just isn’t sufficient.

lucky me my mums washing machine always does high water level on final rinse like what i mean is it fills up to almost half way which is good

TOP LOADER FAN ALWAYS ! They get you Big Time at the Laundry Mat, with these machines ! They wash and rinse your clothes in a Teaspoon of Water ! I want my clothes Washed in Water ! Not Dragged threw a Gallon of Water !

Takes 2 men & a dog to take the top off my GE front load. It's a stacking set & the dryer is on top of the washer. That dryer just isn't a feather weight object, thus the dog to lift & move it. I think the inventor of front load machines, & especially HE/low water, never did a lick of laundry before inventing this disaster of a machine. I received it for free when one of our children worked for GE & won it as a bonus for a job done well but who din't need it personally. Have battle with getting clothes clean in it since 2006 when we got it. I think I've martyred myself enough. It's going to find a recycling location one of these days.

How on earth is that enough water to actually wash anything ? I am glad my top loader still works, because these "high efficiency" front loaders seem like they are skimping on water and the laws of physics to lie about cleaning things !

Years ago I did this to a high end Samsung. The machine was priced at somewhere around $1600 and could not wash anything properly. Two pairs of jeans would not even get completely wet. I adjusted the water level so that it comes up right to the opening for the door and now the machine works great. I don't blame Samsung for this. These same machines are sold in other places in the world where the government regulators don't have rocks for brains. Actually rocks would be an improvement. They have fecsl matter where the brains should be.

Yes I had to do this to my brand new Samsung front loader 🎉

1 full turn isn't enough you have to do 1-1/2 to 2 full turns is huge difference, the water will come to the bottom of the door opening. You have to wait till the middle of the cycle to get the most water..👌

In addition to doing this, which actually does work. IF one has lower water presure as those in third world countries do. Who rely on gravity presure from tanks on their roof. There a little, generally blue in color restrtictor in one of the hose's that come from the generally black in color selinoids that supply water. Using a two to three inch long 1/8 in diameter screw inseted into the restrictor sufficently far enough to get a good bite on it. Then using a plyer's, pulling straight back, and it being very tight will take some doing. Pull it back and out. Replace the water tube. And the time it takes to fill to the level will be faster.

These people are behaving as if water is a scarce commodity that takes billions of years to replenish.

It is said that if you add more water to front loads, it diminishes the efficiency of the machine as it is not "calibrated" to accommodate a "manual" fill.

Frankman711: You mention that hot water is not necessary. This is frequently true. However, running a wash cycle with HOT water (especially the ones where the washer heats the water) about once a month will kill any residual mold & eliminate all odors. No special additives needed. The usage recommendations on most HE detergents are also quite conservative. Often, much less can be used; detergent levels should always be adjusted for load size and how dirt the clothes are. Reducing the amount of detergent will help prevent odors and mold. Finally, leaving the door cracked open after the last wash will help the drum dry out and prevent residual mildew formation.

if the screw gets stuck, scrape off the red glue. if it does not help, heat that part with hot air, be careful not to burn it. Then you can unscrew it easily.

I also purchased the front load but I not satisfied with the water level.It takes so less water ,result in not cleaning the clothes properly. Top load is best..

Thank you for the video. It is very helpful. Nevertheless, perhaps you would consider to edit the video for it to focus on the important items that you want to highlight. Opening of top cover should be like 30 second rather than the whole 3 minutes without need to wait for the right screw driver to use or show the whole screwing process. The testing of water level should be like 30 sec as well. And the drainage... you shouldn't have to include the whole spinning. Also, there is too many silent moment in the video. Suggestion for you to focus on the location of the adjustment screw and how it is connected to the water inlet. Thank you again for the video. It give me some ideas 💡

Oh my gosh! Talk about SLOOOOOOWWWW!!!! IF somebody is that slow , they have NO business messing w/ ANYTHING!!

Add more, just about the rubber sealing world of an italians we allways got front load!

Thanks so much. Hoo hoo I fix it!

Thank you for the video!

I have a Whirlpool duet. It leaves my clothes dirty. When I add more water through the detergent dispenser, it finally starts to touch the water with detergent underneath, and it starts foaming and thus removing more dirt. These high efficiency washers are a failure and should no longer be produced.

1k whirlpool front washer won't clean my clothes because of its water saving feature i dump a 3 gallon bucket of water into the detergent dispenser tray during the wash cycle. ill try this

And thus the clothes' fabrics remain soaked in washing powder residue and dirt residue because rinsing uses too less water for proper flushing of the remaining molecules. Hence the need for double or triple rinsing. That's some water saving... ;)

That’s the same. You have to wash clothes to see the results.

I have a Bosch and can’t do it on mine be cause of a different valve without access to turn anything

this looks like how much water my 2005 Duet FL washer uses after your modification...I think LG's use more water for rinses so the rinse level might be even higher than the wash... I think you chose a good level you do not want much more than that or it's starts rolling the load instead of lifting and dropping.

😊 thanks nice 👍🏻

My machine fills and then stops after a few seconds. It donts wash. What could be the problem

Thank you

Have someone done it in a whirlpools front load ?

The factory puts red thread locker on there for a reason so you can’t adjust it. Not sure why 🤔 I stripped mine and now I have to replace the part 😂

Hey I now have the whirlpool WFW94HEAW0 i got it used and I can’t find the screw to turn it down anywhere

did you get notice when it was brand new or the first day you washed? try to remember that water levels, i did. This time it runs some what dry, it's time to adjust water level assuming you already clean the filters.

This is great, but I'm wondering if the extra water weight will wear out the bearings or other parts sooner? Can the machine handle the extra weight?

Is it possible that the level screw is glued so it can’t be adjusted? I can’t seem to turn the dial without stripping the rubber piece.

Can this be done on a Bosch 6 or 8 Series? Considering buying a new front loading Bosch machine but dont know if I will run into this water issue.

What do you do if you do strip the screw? Is there any way to fix it or is there a way to replace that part?

What washing machines have an adjustment screw does this work for whirlpool duet?

Could this machine handle a comforter?

Thank u

Nah, Top loads are still the best, we need more water to wash our clothes properly.

that is enough water to wash a load of clothes a laundry basket full ?

Hello does this trick apply to front load of Samsung? Thank you

Would anyone know how to increase the water level on a Miele W5873. I've looked for the screw and cannot seem to find it anywhere.

Water level is still the same. I really hate this washing machine

Good idea! But I have a beco... 🙁

Do you know how long you would need to wait for the warranty on an LG Front Load Washer?

There's a countable amount of water that's needed to dissolve a given amount of washing powder and an estimated amount of dirt. Using not enough water only leaves a residue of washing powder and dirt inside the fabrics and thus creates a need for a second washing (which wastes electrical energy). The same with rinsing - there has to be enough water to properly flush the said residues out of the fabrics (transport the molecules of the said residues). Insufficient water amount only makes it necessary to rinse twice or triple. Again: waste of electrical energy. The stupidly low water level in washing machines is an unscientific scam.

My screw is stuck, I’m scared to turn it hard, I may strip it.. good vid tho!

I have a kenmore He4, I don’t seem to have a water flow adjuster! 😕

Does this void the warranty?

Does this process for increasing the water level also work for the

I HATE HE appliances, especially washers. Run them 2x to get as clean as my old washer. F'ing SUCKS.

Won't it be a lot easier, just throw a bucket of water in there before you shut the door?

That's still not enough water. The clothes can't get soaked and thoroughly cleansed in that pint of water :)

😀😃😄😁😆😅😂🤣 I could chug more water than that.

Yoooo, that’s not enough water

Another AI ROBOT VOICE. I went to another video to find out how to do this.

No enough water ur adjustment was didn't work

Wow that’s more water lol.

👍

02:48 🤣🤣🤣🤣🤣

You still need more water than that

Fucking computer voices get dislikes.

Holy shit do we have to do we have to see you unscrew every screw with every twist learn to edit

I understand why you did that, but, your going to cause water to go places it should not be. You will have leaks and machine damage. Good luck.

TEXT TO SPEECH SUCKS!!!!!

What is with the goofy voices in these videos?