How to Install a Door Hinge - How to Cut a Door Hinge and Hang the Door

Рет қаралды 99,026

Күн бұрын

Whether you are a "Do It Yourself-er" or in the carpentry field, this How to Install a Door Hinge video will help you get the door hung faster and more smoothly. In this video, we will show you How to Cut a Door Hinge and How to Hang the Door from start to finish.
Tools used in this video that can be found on www.hingeoutlet.com/
- HingeMate 350: tinyurl.com/yc8wb87c
- Door Lifter: tinyurl.com/7bueznyk
- Door Holder Stand: tinyurl.com/ushrea85
- ProHold Adjustable Magnetic Wrist Strap Organizer: tinyurl.com/55b7e4aj
- Flex Screw Bag - Screw Organizer: tinyurl.com/zrj794hc
- Pin Popper - Hinge Pin Removal Tool: www.hingeoutlet.com/products/...

Пікірлер: 35

@kgucmen Жыл бұрын

Zero info, how the location on the door and jamb matches This is not informative video… This is just commercial…

@Thedoctorjosh Жыл бұрын

You skipped the entire process of mortising out the door jamb.

@cruithin4773 Жыл бұрын

Everything can be made to look easy. But when you need to match the hing on the door up with the hinge on the frame, it’s not all that easy after all.

@Gabriellariz 2 жыл бұрын

Ok KZfaq, on this video I’m gonna demonstrate how to build a rocket ship to go to the moon. Build the carcass, then attach the wings and u r done, is that simple.

@unclem4626 Ай бұрын

The hard part is measuring the length of the door jam to meet the length of the door so everything matches. This also determines how high the door is from the top of the jam and the floor. None of this was mentioned. So much was skimmed over(placing the door in position-rather difficult-got the t shirt) in this vid, I think it's just a promo for the tools. Thanks for showing off these helpful tools, but don't disregard the process. I also noted the door jam was perfectly flat(makes install easier), unlike most door jams that have a ridge that stops the door.

@andyfloyd8267 Жыл бұрын

So... buy a bunch of stuff. Use them. Done!

@johnreddick413 2 жыл бұрын

This wasn’t helpful at all, this should be a hey buy these products video. Minimal info on installing the door

@ronj1602 2 жыл бұрын

I guess you just kind of eyeball where to place the mortise on the jams .

@joeyprather4739 Жыл бұрын

Do you sell a hammer swinger for use with the hinge popper?

@WelcomeToTerrorvision 11 ай бұрын

Holy expensive job Batman

@imnotmike Жыл бұрын

You tried to hawk $260 worth of specialty tools for this. And after I spent $260, I would still have to do all the work. How much does a professional door installation cost?

@t.e.1189 Жыл бұрын

I do this professionally (35 years plus) and I can say this is a horrible video. I makes it look so easy. So much was left out as far as depth of mortise, hinge backset and height location. Also nothing was mentioned about scribing the door, beveling it, possibly cutting to height nor boring the holes for the knob & latch. If you are going to buy a slab and mount it in an existing opening all of this will be necessary. These videos are designed to sell products not give a customer a realistic idea of what it takes to machine a door on site. The price varies, but on average I charge around $200 per door, sometimes more depending on the situation. Solid core doors upstairs can definitely increase the cost. It takes a lot of specialized tools (more that what mentioned here) and years of experienced to do a good job. Not just any carpenter can machine a door on site. Not even most finish carpenter do it. And quit honestly I've been called more times in my career that I can remember to fix or completely rehang a new door that was hung by a "finish carpenter" that thought he new what he was doing.

@Bambooken Жыл бұрын

How about the fine adjustments that are necessary? But if the door always wants to swing open or closed? What tools do I need to buy to adjust that?

@guerosantana2460 10 ай бұрын

A level

@guerosantana2460 10 ай бұрын

Lol 🎉

@hinnmanfamily 5 ай бұрын

A finish carpenter once told me he just smacks one of the hinge pins with a hammer to put a slight bend in it to fix that.

@t.e.1189 Жыл бұрын

I do this professionally (35 years plus) and I can say this is a horrible video. I makes it look so easy. So much was left out as far as depth of mortise, hinge backset and height location. Also nothing was mentioned about scribing the door, beveling it, possibly cutting to height nor boring the holes for the knob & latch. If you are going to buy a slab and mount it in an existing opening all of this will be necessary. These videos are designed to sell products not give a customer a realistic idea of what it takes to machine a door on site. It takes a lot of specialized tools (more that what mentioned here) and years of experienced to do a good job. Not just any carpenter can machine a door on site. Not even most finish carpenter do it. And quit honestly I've been called more times in my career that I can remember to fix or completely rehang a new door that was hung by a "finish carpenter" that thought he new what he was doing.

@barriowoodworks 9 ай бұрын

I made a solid wood doors for our home. That was the easy part, the real work was everything you mentioned.

@jdiaz8866 7 ай бұрын

There are so quite a bit of details that should be added to this video, all the pre-work involved, leveling and adjusting. A better detailed video would really help for the DIY repair and improvements.

@seaneee175 2 ай бұрын

having a hard time listening to DIY advice when they call a router bit a drill bit.

@11bravo13 4 ай бұрын

Sales pitch??

@joeyj6526 Жыл бұрын

How to fit hinges... First thing you want to do is buy loads of tools you'll never use again..

@timmcgill284 6 ай бұрын

Is this a gadget ad.....really

@stevewiverstad2805 10 ай бұрын

No help At all

@kevinblundell4969 Жыл бұрын

oh great.. lets go out and spend several hundred dollars on tools just to install hinges, NOT.

@johnsturdy8255 8 ай бұрын

Not an insurrectional video. This is just a commercial for stuff the content creator sells. WASTE OF TIME.

@jayfontane3242 7 ай бұрын

Crappy video no detailed instructions about all the tough parts of the job. Just a sales video

@odc43054 5 ай бұрын

Worthless

@jacquelinepodgorski7557 7 ай бұрын

You didn’t say how to measure up the actual hinge placement 👎👎👎

@jordainjaynell6797 2 жыл бұрын

aipamy #von.ong

@bobcooper592 7 ай бұрын

Sadly they all seem correct on the lack of good information. He sets the jig up against the jamb but with the casing on the door opening you can't do this properly with the configuration he shows. You'd need to remove the set knobs and measure the distance because the casings don't let the jig hit the jamb properly.