My surmise is that people who argue against furlers don't have to sail short-handed. Nicely done!
@Antipodean332 жыл бұрын
whats their argument against furlers?
@BillB232 жыл бұрын
@@Antipodean33 One argument is that they fail at the worst time. Hell, everything on a boat fails at the worst time. If a furler fails then strike the sail just like a hank-on.
@Antipodean332 жыл бұрын
@@BillB23 I've been looking at a little boat to buy, a ketch cutter and I said to the old fella "pity there's no furlers" and he looked at me like I was a heretic. He said "this boat is built to cross oceans, without all the stuff that breaks" he's a purist
@jasoncreed63962 жыл бұрын
Feel sorry for the Canadian,little rude to publicly state that her was only second choice .id not be helping this guy again after that
@marklapierre56292 жыл бұрын
Just one of several hundred things I need to buy for my C-25 resto-mod.
@richardcranium84083 ай бұрын
Hey, thanks for taking out the time to make this video. I reviewed it a lot when setting up my LS100. It took me 5 hours total alone.
@SAILINGintoFREEDOM2 ай бұрын
No problem
@davidfisher2682 жыл бұрын
Congratulations for not loosing one of those screws in the dock or overboard!
@joboyjo2 жыл бұрын
Couple of tips for Facnor and sta-lok fittings. Use anti seize on thread prior to tightening wire terminal occasionally there will be galling of the stainless to stainless thread and it will literally weld together unable to be undone. No need for thread locker on that one it gets done up FT as plukka said. But do use screw thread lock on furler joining screws they will work loose and disappear. Good choice on Facnor I love the gear they build.
@markbailey60512 жыл бұрын
I had this problem of seizing and found it was caused by the sharp end of the wire cutting into the receptor, easy fix is to take the edge off of the end with sand paper, file or grind wheel so it does not bite but slides.
@clivestainlesssteelwomble76652 жыл бұрын
@@markbailey6051 Ive seen one other channel take care to make sure strands dont get caught in the groove.. so they fitted once undid it checked nothing was jammed in the grooves and then retightened it to full Torque.
@lesabre19722 жыл бұрын
That's great glad to see the upgrade Plucky.
@jacobfirst23652 жыл бұрын
Nothing wrong with a bit if bromance with the Facnor. ❤️⛵❤️
@stefanieobermeder20652 жыл бұрын
I love these instructional vids. You’re a natural teacher
@stephenlucier2 жыл бұрын
Great to see improvements happening!
@5minpick-me-upswithlorenwa4962 жыл бұрын
Great information. My Roller Furler needed some TLC & this vid was very helpful
@nealchristensen17932 жыл бұрын
Just fun adventure wisdom no DRAMA load of pineapple's and amazing information ! Thank you !
@mattparker97262 жыл бұрын
NOT ENOUGH PINEAPpLes Also No LiSa REEEEEEEEEEEE!
@KennyP882 жыл бұрын
I could have sworn I left a comment this morning. Anyway, nice piece of gear for the boat.
@christinasimpson77502 жыл бұрын
Good job guys. Congrats. Now you can clean and paint the inside of your boat.
@jimlofts54332 жыл бұрын
and install a white rocks storage system to keep the sheilas happy
@arimmer23562 жыл бұрын
This is now officially number one sailing channel on YT people.
@odysseyofjason2 жыл бұрын
Hey Plukky 😃 I like this one. Nice work. Top Stuff People !! Cool how you can access the turnbuckle. Never seen that before 🤙
@harrineher24812 жыл бұрын
Nice to see a technical video for a change. But no snorkeling, spearfishing and no girls. comon people.
@kevintwiss34952 жыл бұрын
That's a nice looking furler!
@sonnylange30512 жыл бұрын
WOW! Plukky is actually doing some work and not just surrounding himself with pretty girls and fish. :)
@SAILINGintoFREEDOM2 жыл бұрын
Harsh
@troublekaliman2 жыл бұрын
Awesome! Keep up the greatness that is the pluck meister.
@stevethurlow90592 жыл бұрын
If you put one wrench on the dock and the other one above the lower one then you can put on more force
@sailor-rick2 жыл бұрын
Thanks for the expert info... and all the other high quality content.
@ulliezaubitzer47522 жыл бұрын
Really exciting and very good lession. Thank you! 🙂
@andysimons92262 жыл бұрын
My ancient Rotostay furler has the track, or foil, which slides up and down. The whole track slides up the forestay, then you turn the furling drum to loosen or tighten the forestay. There are "D" sections sauged on the stay top bottom and centre, the stay has a big bearing at the top so the whole lot turns. Kinda weird, but it works. Although, I'm a bit jealous of your new kit!!
@comfortablynumb93422 жыл бұрын
I grew up fishin' in boats but hearing you talk about sailboat stuff is like listening to French, but I'm learning. However FT is pretty easy to understand 😂.
@markbailey60512 жыл бұрын
Very good design. I like to use a good paint instead of sunbrella for my UV protection. It is lighter so not to wight heavy on your sail when it is raining, cheeper and no holes.
@oldjack30232 жыл бұрын
That's very interesting Mark, what kind of paint do you use?
@timnoneya8112 жыл бұрын
i agree with jack, that's very interesting. and yes im also very curious to know what paint you use.
@markbailey60512 жыл бұрын
I use a quality opaque wood stain. BEHR premium solid stain 5011 white snd this can be tinted to any color. I also use it on decks. Roll on and shake sand into wet paint, let dry for second coat. Paint the sail cover and Bimini top. Cleans with water and dries fast.
@oldjack30232 жыл бұрын
Thanks Mark I'll give it a go
@timnoneya8112 жыл бұрын
@@markbailey6051 Thanks for the great info. I think I'll give it a try on my old 130 Genoa.
@NearlyNativeNursery2 жыл бұрын
I truly appreciate you Plukky posting the how to vids. Sure wish you would do more.
@SV_Ruli2 жыл бұрын
I've instal a harken MKIV unit, works simmular, slides up and I can ajust the trunbuckle too.
@SV-DEDICATED Жыл бұрын
Thanks Plukky, Just what I needed.
@carlvandenberg1402 жыл бұрын
What a good idea that was.Making life easier and safer.Even with crew it is a great idea.......yes upgrade where and when you can.That eas very positive.Nice Marina too.
@larryoutdoor2 жыл бұрын
He once flirted with danger, but danger got to clingy. He normally doesn't question himself but when he does he likes his answers. Happy Valentine's day my friend. Stay thirsty🍻.
@NZL505052 жыл бұрын
I never got your email asking for help! 😊 Well done and good choice on the extra halyard guide. See how you go with furling at normal halyard tension. If the angle is good that should work fine. If you find it catches the halyard (and tries to turn it) and jams at normal tension you can normally ease the halyard a touch to get furling again. And then take a fresh look at the angle adjustment.
@SAILINGintoFREEDOM2 жыл бұрын
Thanks NZ champ...
@andrewcarroll22772 жыл бұрын
Do the fastnet lighthouse. Will meet you out there, love your vids plucky.
@willphelps67152 жыл бұрын
Good to see you doing some repairs and upgrades on your boat. Smooth sailing, Lad.
@danieloliver202 жыл бұрын
Great furler install Plukky, I must admit I got a little nervous with that beautiful shiny drum sitting @5:35 at the edge of the dock! 😁
@tomwilliams86752 жыл бұрын
That's going to be a lot safer for you, good to see Peter.
@eamonncoady98232 жыл бұрын
Bloody Norah, telescopic sections, great idea.
@deborahmiorgan8292 жыл бұрын
It looks like good chromium but we will have to see. I remember Plukky saying that stainless steel and chromium has took a serious nosedive in quality! But I hope for the best always! I love it, step by step, complete install steps. WooHoo!
@ckh28152 жыл бұрын
Nothing wrong with stainless or chrome, unless it was made in china. They have no quality control, no consumer protection and no regulation. Stainless chinese chain has been known to last a whole year, sometimes. All stainless builds corrosion in salt water.
@jaylindsey79432 жыл бұрын
Good day people nicely done plucky that will be a great addition to your boat and all the adventures over the next wave 🌊 cheers sailor friends 🍻
@MegaTriumph12 жыл бұрын
Good place to tie up to the dock and stay awhile. Explore it looks like a great find in Panama.
@leadreviewer32572 жыл бұрын
Great video beautiful out there
@ianh26742 жыл бұрын
Very educational pee pol, that will be a great addition to the boat Peter, definitely will be much safer for you when going solo.
@GunShot1012 жыл бұрын
love watchin plucky you grill and smoke fish the best
@pontoonrob79482 жыл бұрын
Awesome video. The ones where you teach something are great.
@roadboat92162 жыл бұрын
Very nice. Reminds me of a Pro Furl. Similar design. Great rig! Thanks for the demo. Will look into it.
@benlindner52852 жыл бұрын
Hey Plucky thanks for the vid, it was of great value to me because my boat came with Stayloks all around and it was great to see your tips on installing them. Ben S/V DAWN
@mattpovah59522 жыл бұрын
Nothing but quality people! :)
@garrickmartin77072 жыл бұрын
Good work laddy. Now. what I would like to see. More sailing. The chickies and the wreck diving are all well and good but are you stuck in Panama? Let's go somewhere!
@SAILINGintoFREEDOM2 жыл бұрын
I am stuck without a jib. Saving up so I can move
@Spoon2792 жыл бұрын
Look who's moving up in the sailing world. What's next, an espresso machine? 🤣
@stephen80862 жыл бұрын
don't forget to locktite the scrubscrews
@Wedontwantnowarnomore2 жыл бұрын
Very educating people! Cap is a master in furl forestay installations! Rock Hard 🤘
@braithmiller2 жыл бұрын
Keep this up eventually you'll get to painting again.
@SAILINGintoFREEDOM2 жыл бұрын
I have to wait till rainy season first
@nfinitymarine44662 жыл бұрын
You're going to ruin your reputation putting new parts on that boat. 😁 Bonus points for doing DIY videos.
@nooneanybodyknows79122 жыл бұрын
Glad to see you getting quality equipment. 👍
@SOLDOZER7 ай бұрын
I prefer hank on as a solo sailor. Yes they are more work but theres nothing to break or go wrong at all. Furler is fine of you have 3 people to help you unjam it as the sail violently flogs.
@SAILINGintoFREEDOM7 ай бұрын
Sometimes yes...i had to do it by myself once without an autopilot in squally conditions close to reef and rocks....it wasn't good
@paulb2672 жыл бұрын
Nothing but quality as always plucky, cheers mate.
@markshenstone5082 жыл бұрын
Very Educational Plucky ! Thanks for sharing 10/10 greetings from 🇦🇬
@LoremIpsum19702 жыл бұрын
Nice job! Good to see it worked out well and you've now doubled the price of your boat 🤣 Time for a well earned pineapple I think 🍍
@jenseggertsen21982 жыл бұрын
Lyckely I have a furler, maybe I should have a look on it, very good instructions. see ya Plukky.
@kevinsearle47612 жыл бұрын
I like this ! Good to see you building up your home !!!
@DurinSBane-zh9hj2 жыл бұрын
Nothing dodgy about that install, nicely done
@dgregor10002 жыл бұрын
Job well done 👍
@markperrins94852 жыл бұрын
Great tech film plucky. Luv yu
@geraldinepluyms59352 жыл бұрын
Just hearing your voice is good with me. And something substantial. thats up to you , but whatever LOL. Thank you!
@dongeary22192 жыл бұрын
Sent you some rehab money, enjoy your videos !
@SAILINGintoFREEDOM2 жыл бұрын
Thanks Dub...I need all the help I can get
@Gerard62352 жыл бұрын
Excellent work cousin cheers mate.
@hamishesslemont37052 жыл бұрын
Great job - very informative ( and you still managed to inject plenty of humour ) 😊
@Corrvision2 жыл бұрын
Cool Good to know!
@63bigmac632 жыл бұрын
Great Job Plukky 👏👍👌
@melinda57772 жыл бұрын
How to. I love these kinds of videos. Thanks Capt. P? LOL. ❤🇺🇸⛵🎬🤙
@ctrader62 жыл бұрын
Five stars on this video, Captain!
@davidfield44322 жыл бұрын
Enjoy these plukky. 👍👍👍👍💪💪💪💪👌👌👌👌
@davetaylor88582 жыл бұрын
Very interesting Peter. Hope you don't have to do much sailing single handed.
@mariescott98532 жыл бұрын
Enjoyed watching your expertise. Thanks!
@lancesmith72352 жыл бұрын
The new intro music is nice.
@RockDodger2 жыл бұрын
Nice when you can put your engineering degree to good practical use 😉 Hope this comment finds you safe well and happy mate
@gordonclark17112 жыл бұрын
Much more single handed sailing? Plucky the fun you have with your crew makes your videos much more entertaining. There is only so much spear fishing and beach barbequing you can do on your own before it gets samey. That said I have no idea for the reasoning behind the decision so we can only wait and see although I do have one observation...not one tongue in cheek comment about your engineering skills. You are slipping mate.
@SAILINGintoFREEDOM2 жыл бұрын
Nobody wants to come to my boat ha
@kimfoots12882 жыл бұрын
Great video educational thanks waving hand for Maryland👋
@63bigmac632 жыл бұрын
Plukky do you still get to see your daughters ?
@earlsnapp52092 жыл бұрын
4th... Great install info.
@sailingcitrinesunset40652 жыл бұрын
Nice video hope it all works well.
@helluvatime45622 жыл бұрын
So easy a cave man can do it!!! Nothing but quality here people.
@waynecummins97132 жыл бұрын
Nicely done mate 👍 👌 👏 🇬🇧
@willslever81122 жыл бұрын
super vid
@ianprice90052 жыл бұрын
Great like the new furler
@jacksbackable2 жыл бұрын
Very interesting to see! Thanks for sharing! 😎🐬🏖🌴☀️🇦🇺
@thomasg13232 жыл бұрын
Nicely done.
@ConvergTV2 жыл бұрын
Awesome! Let us know how it performs.
@TheTandeddu2 жыл бұрын
oh no! what happened to the new crew?
@jamesdaley18522 жыл бұрын
i loooove reggae music
@davidfinley142 жыл бұрын
I was watching the interview you had with James (sailing Zargio) and you mentioned the names of the better catamaran's to own for blue water sailing. I didn't catch the names of the manufacturer's because I'm not use to your accent. Please rename those for me to help narrow my search for a quality boat.
@billkaroly2 жыл бұрын
I'm guessing this is close to real-time? No crew?
@Cptnbond2 жыл бұрын
Excellent episode. Facnor has mixed reviews on some cruiser forums. I guess they have fixed the issues with new models. What model did you install on the boat? Cheers.
@thenorseman28042 жыл бұрын
This is how you install Facnor furler. DON'T! But if you do, then you have to install a HALYARD LEAD, just like you did. Nice to see you did that. If not, the reflecting wheel gets wear from the helyard that makes grooves. Then you will experience that the grooves hooks on to the helyard and twist it around the forstay profile and jam it. Then a lot of sailors try to furle the sail with the winch. Result: forstay gets twisted the wrong way and brakes the wire cords slowly one by one or all in one big................! . Not fun! But plucky knows a thing or two when it comes to sailing.
@SAILINGintoFREEDOM2 жыл бұрын
lets not go overboard with 2 things...occassionaly i know something
@thenorseman28042 жыл бұрын
@@SAILINGintoFREEDOM 🤓
@clivestainlesssteelwomble76652 жыл бұрын
Safer smoother sailing Plucky.
@hughrodgers51712 жыл бұрын
Nice job. Safe ⛵
@arnoldlueders75002 жыл бұрын
I didn't understand ANYTHING you said but good video nonetheless!
@johndodds79492 жыл бұрын
I think you need a video sponsor for New Zealand 🇳🇿 sailing champ to bring you un-duz-it deck cleaner for him or her to scrub your deck and clean off the rust marks!😂😀
@kevinh20482 жыл бұрын
Happy Valentines Day "People"
@kealyduvalle11782 жыл бұрын
Yes yes very nice job Plucky. When you find new friend come aboard?
@ZipJoy Жыл бұрын
Good video? Do you need to change the headsail to suit or just use the existing one already had?