Young man you are a real tutor,your explainations give me enough trust to install the alarm with trust!

I'm installing my alarm on Tracer 900 tomorrow. Your video is very educational and will definitely help. Thank you and keep up the good job!

Nice video brother!!! I bought a alarm with remote start about 6 years ago and about 3:26s into the install I changed my mind. I think I’m gonna try it for real this time. Nice work man

Man that was fantastic. I watch tutorials for legit everything nowadays and that by far, was one of the best. No bs, no fluff; just super clear, straight to the point, and easy to follow as well as start and stop. Now all you need to do is buy a Hayabusa and install every mod I’m looking to do on mine. That would be fantastic and I’d really appreciate it. That’s not too much to ask right?😂 But seriously, I wish all tutorials were like this. Great job bud

A great help, Cheers.

By the way I like how you explain the installation process!!

After many tries to find some help I found this very helpful clear and well explained video. Thanks for your time and efforts. Perfect

Thanks for this amazing tutorial! I will try this on my GSXR 1000

this video is so well explained and video'd i literally taught myself wiring from ground zero , because i hyperfocused and started googling , damn all i wanted was to look cool infront of my friends , now i feel like i just did a whole electrial diagram course

Soooooo good tutorial. You are amazing bro!

you are a boss!

you are the man I tried to hook that up for mouths and in 30 min you told me how to do it thanks

Very nice tutorial.

Hi Brovacs, can you tell me if the same resistance (100 Ohm?) you install on ignition to remote start,can be right for a Suzuki bandit 1200? I don't know how to get the exact resistance forma this bike. Thanks form your tutorial and help!

Great video...thanks...now where do I find the tap connectors and other connectors? And I have a 2007 Honda shadow Sabre, will the kill switch and starter function work on it as well?

A very Good n Detailed explanation, which i never found on any other "How to" If possible could you suggest where will i have to use the "Immobilizer" wire/wires to a KTM Rc390. I have more than basic knowledge about my RC390 n the Wiring, but am Confused about the Immobilizer connections. Waiting for ur rply... Thx.

Great video young men,

great video! Fot the folks wondering the kit is called "BlueFire Motorcycle Security Kit"

Handy tip if you unplug the screamer while your fitting this, the alarm will still give off enough noise to notify you that it's triggering properly without deafening you. Once your done tinkering you can plug it back in and have your ears unharmed. Given how many bikes are sold with alarms that have been bodged into place this comes in handy if you have an alarm pre-installed but doesn't work as intended so you have to play around to find the short

Red / black negative positive. Yellow. Alarm lights. Blue relay signal. Orange starter switch. Pink kill switch. Grey ground. You're welcome whoever sees this.

Hi Brovacs thanks for the video, ihave a question regarding the antihijacking feuture, if your are driving and activate the alarm this will stop the bike but will aso blow a fuse?

Hi, great video, very informative.👍 Before i get going with my project, i was wondering if wiring in the remote starter to a TDM 900 with a built in immobiliser which needs a coded key is the same process you used. i.e. blue wire to starter relay, orange wire to starter switch and resistor to ignition switch/ground. Any help would be most appreciated, thanks in advance.

Any chance you know how to set the sensibility mode? My alarm keeps startling for minor reasons,like rain or wind.

Thanks so much.

It may well be the most comprehensive video on the subject of cheap chinese motorcycle alarms, kudos! Have you tried to sniff the signal sent by the remote? I wonder if they were smart enough to use a rolling code.

This is a very nice and complete video. It really helped me to install one of those on my bike and saved me a lot of money. Thanks buddy and greetings from Greece.

great vids. where did you get your automotive test light? thanks

Hi thanks for the video, I be able to connect blue, red and black, I have kawasaki er 5 and just wonder do I need resistor for the orange, and I tried all the wire from the ignition switch but no help. Bike now tried to start but won't start unless I but the key in on

Thank you for the vid! I was wondering where I can figure out what size fuse I need for my motorcycle? Reference to 1:11. Thanks!

Thank you for the video I can't find a wiring diagram for gilera dna 50 But under the seat the is a ready wires to connect alarm (dna alarm made for this type of Motorcycle) But i cant find on Internet so i bought alarm same as yours I allready conected the red and black and the 2 yellow to the blinker and it is working But still the start and off Funktion need to be connected so There is 4 wires blue gray orange pink But i dont know the wires colors of this gilera dna 50 Can you tell me what to do? Thank you

Congratulations on the video, does the motorcycle need to have the key in the ignition to turn it on? I have a r1 2004, does this alarm system work on this bike?

Fuse, ring/spade connector, tester and tap connector? Where did you get those?

Make sure your in neutral when remote starting

Very well explained

Are you familiar with the 2007 honda vtx 1800t adding a remote start? And if so do I need a resistor or relay to get the remote start to work? Thanks

BRAVO! This was very informative and detailed, I appreciate it. For a while now i forgot the reason people uploaded HOW TO videos to youtube, until now. Thanks!

Trying to follow your write up for my install on a 09 Yamaha R6S, however, there are many differences between the 2. Any way we could discuss it? No write ups online for it either. Have wire diagrams, and pretty wire savvy.

What fuse did you use because I can’t find any that can fit

amazing ! everything looks so easy with you. I ve never seen such plugs and tools you have used (I m not garagist)... your video is amazing ! thanks. is there something much easier for a beginner like me ?

got this today for my xenter 125 (2017 edition) the instructions that come with it are useless but since someone had a go at stealing my bike last night I decided i had to atleast install the alarm. I connected the red wire to the red of the battery and the black to the black (I did not get any of the connectors you used with my kit so i twisted the wire around the screws on the battery, should be ok? ) also i did not get a fuse with mine, as well as not getting the connectors, everything else looks the same, did i get a counterfit copy? how nervous should I be?, i mean the alarm works but I am now worried i will get a flat battery or a fire! (never done any diy work on a bike before)

Bro! Vacs! You're an electrical stud.

Does the blue wire go to the start switch in the start relay as I'm trying to fit to rocket 3

Good day sir. There is a line for START in the module, where do i connect this in the start key line of motorcycle? There are 2 lines which one? TIA

Hi im pretty comfortable with everything you've done i just kind find what size resistor i need for my 2006 Yamaha R6. Any chance you could help me out with this?

Hay do you compromise the safety of your motorcycle by installing a remote starter. Makingbit easier to steal via say hot wiring? Will the bike start whilst In gear or whilst the kick stand is down?

Not sure if anyone has mentioned this but i found that with mine, rotating the unit 90%(wires facing left of bike, laying flat) made a HUGE difference with the sensitivity of the unit! initially I could shake the crap out of it with it parallel to the bike and it would Not go off, but now its like his video and just a little shake makes it go off to the point where i might have to turn the sensitivity down.

Thanks for the tutorial, it was most helpful. I have one complaint though; when I am done riding the bike and I put it in neutral and turn the engine off, the alarm makes 3 beeps, stops and after a short while it makes 3 beeps again. It only stops when I arm the alarm. Is there a way for me to stop this beeps when the alarm is not armed?

Great video, how do i set the sensibility of this alarm?

Hi. I have an similar alarm, with same wires. The thing is that I got all the wires connected where they should be, but when I double tap the lighting button from the remote it just turn on the ignition but doesn't crank. I mention that the bike is a 2004 yamaha fz6 and I did not put a resistor like in your video because I'm not sure where to put it and if this might be the problem. If anyone can help me with some info about that, would be nice. Thanks.

Hi is it possible to connect a diode to this alarm so when the alarm is on keep flashing and if so which wire to use.Regards

did you wire the resistor from the ground wire to the wire running to your ECU

Hey do i need to put the keys in the switch to make the bike start remotely or not ?

Hey I'm trying to hook one up to a raptor 700 I shouldn't have to do the resistor thing should I?

Tanx for the information But after installing the alarm system on sv650s nothing work on the bike if I start with the remote the only thing that work is the engine,is there something i am not doing right

I need some advice on wiring one of these to a yamaha pw50 so I can remotely kill the engine. The kill switch on the bike has start, run, and stop, so it has me stuck.

On the orange and gray wire what wire are you hooking them too you did a good job on the rest but stumped me on the others

What amp of fuse did you use on the bluefire box 5 10 20 or 30

Hi. Can you help me telling which resistor should I use for my bike? I do have a 2014 ninja 650r. Thanks.

Hi got honda cbr 125 just wondering if u know where can get resident from

How about for DC-CDI? where can i apply the resistor?

if we connect this device while remote staring does ODO meter and switchs work??

Instead of connecting engine start wires to start my bike can I connect them to turn on LED lights I have installed. Don't want to start bike without key

I really want to go ahead and install my system, but I have a 2007 Kawasaki EX250 Ninja. I'm having a hard time figuring out what fuse to get to protect my bike. What fuse did you use, or do you have a recommendation for this particular kind of thing?

good man

I hope ypu answer this comment ik the videos old but how does tour one so sensitive my one takes a good amount of shaking the bike to make it go off

Is that the "Samoleus" or the "BlueFire" ? There are 2 on amazon they look exactly like this, but which one is the one you are using?

Where can i find the auto start and also can i install it on a honda innova 125i ANF

So that resistor at the ignition switch is a need and the bike won't start of I don't install it??

Awesome, great tutorial. Question. When installing this,. Can I get rid of my ignition key?

I have a R1 2004 i live in Germany I connect the remote start with a relay pin 30 and pin 86 connect together and then ground to the bike the blue wire from spy 5000 to pin 85 and then pin 87 to the right side of the bike to the blue wire from the starter switch on the handle,the engin won’t turn over but if i put the key in the ignition and turn it to the on position it will start with the remote,on the left side there or some wire coming from the ignition so I connect the 2 wires dash light up engine turn over but will not start,any help.

Where did u get these double splice connectors? (Tap connector you named it)

when using your remote started.. does you need to have your ignition key on and turn on?? for some reason mine wont start if i dont have the ignition key turn on.

Do we need to do the resistor bit if we dont have any security system like a steering lock on the bike? I a installing it to a yamaha raptor quad bike??

What size resistor will I need pal? I've got everything else working but the engine start just turns the bike over won't fire?

Hi ! If I want to use it without auto start for my bike , is it just connect the power for the alarm and then connect the yellow wire only that's all right ? Which mean that I use only 4 wire only ... ? Thanks :)

Hi, what kind of resistance do I need for a ktm rc 200? I don't understand very well how to connect the remote start wires

I have a 93 honda cb nighthawk 750. What if my bike don't have a mobilizer should i just follow the process.

Hey man. The cable system in my dl650 is same with your bike. I've connected all as you described. But only fuel pump does not work when I'm trying to start he bike with remote. Just one moment I couldn't understand correctly ,where you've installed the résister. I can't see clearly you've connected orange and grey cables with résister or what? And where I can find his résister. ? Regards.

Does this wiring diagram work for a taotao atm50-a1 scooter?

Does the stop engine switch have to always be in run?

Hello, am trying to fit this alarm system on my bike, am leaving out the 2 wires of remote starting up because it is kick start only but I would like to fit grey and pink wires so it will be on and off from my remote. will you please explain more where these wires to go? Thanks

hi i have a yamah R1 2004 and would like to install my remote start spy 5000m,i have seen loads of video on here showing the bike starting but not how they do it,I have seen someone just just disconnect the wires from the key but you used a resistor can help me find what resistor wouöd i need,I also see ppl used a relay to connect the blue wire to any idea why.

Really helpful video But I have a question When you wire the Emobiliser I am not sure what you ment sorry I really not sure what to cut My bike is a royle Enfield intersepter 2018

Hey mate. Does your original starter still work?

where do i connect the grey wire and pink wire coming from the alarm to my mio i 125 motorcycle? pls responce thanks

I like that test probe you have it holds the wire in place for you I would love to get one like that

the orange wire - connecting it to the starter switch lights up the dash?, my problem is the starter motor works but the electronics are off

Hi how are you i hope you will be in the best case.. I have a simple question and I hope you will answer me I have a spy alarm system 5000m and my motorcycle is Suzuki GXR1000 K7 but unfortunately I can not install it with the knowledge I have tried very much but every time it turns off fuel pump Can you help me with that and I will appreciate that

Hi where did you get the headlight for the sv the look cool

@brovacas , may you explain better the first metod to wire grey cable and pink cable? thank you

Whats the name of the alarm you installed in the video, and where did you get it from?

Does the engine start button also turn off the engine if not what is the best system that has that function

Hi I buy an alarm and I get wiring diagram for my bike. I connect the red and black to the battery. I connect the blue to the starter and I hit the bottom on the remote start and the bike try to start but don’t turn. The orange to an accessory but I don’t know where I have to install the resistor

I have the same stuff bought online. But my alram buzzer is not that loud

Who made the intro instrumental, is there a longer/full version?

Where did you buy the test probe?

Why do you need the resistor replication does your motorcycle key comes with a chip im lost on that part

What's the name of the circuit tester you use in detecting signal light?

Hi I like to install one too but my scooter seller tell me that will have problem after few months due to the fuel injection system ???? any idea for it ??? tks

Hello...... If i am connecting to my headligh for flashing when alarm goes off, does it matter where along the headlight wiring i connect? Many thanks