How to Install a Security Light the Easy Way

Рет қаралды 233,776

Жыл бұрын

In this electrical DIY guide i will be showing you how to fit a security light. I will take you through step by step how to wire a security light. If you like the content leave a like and please subscribe for more content like this as I've got a lot more to come and there will be something that will help you out.
Buy items seen in this video here;
Stanley Fatmax Wire Strippers - amzn.to/3O1nEsc
Security Light - amzn.to/3b1yQXZ
Outdoor Junction Box - amzn.to/3os91Du
Glands - amzn.to/3okRzks
Wago Connectors - amzn.to/3BbqTdA
🛒 My Shop -www.amazon.co.uk/shop/thediyguy
► BECOME A MEMBER OF THE DIY CLUB Click! 👇🏼
/ thediyguy1
► Get FULL access to the Discord Group and other perks!
Follow me on Instagram 👉 the_diy_guy_youtube
Thanks for watching The DIY Guy. My mission is to bring you the best Tips, Tutorials and Tools to help you learn and save money.
Please be advised that this is only a guide which is intended for informational, educational and entertainment purposes and The DIY Guy cannot accept responsibility for any work undertaken. Be safe and have fun! The Amazon links above are affiliate links and as an Amazon Associate I earn from qualifying purchases. I may earn a small commission if you purchase via the recommended links, however this will not cost you any extra.

Пікірлер: 297

@neillscannell9278 9 күн бұрын

Second one I've watched. I might take up sparkying you make it look so easy!!

@stevepratt9646 Жыл бұрын

This was installed better than a lot of professional electricians I have come across would ever do great video really good install. I'm a self employed electrician with my own business it's nice to see someone explaining things and installing things correctly.

@TheDIYGuy1 Жыл бұрын

Thanks 👍

@alapone5063 11 ай бұрын

The wiring inside the garage does not need to be in a conduit?

@adzg4m1ng85 3 ай бұрын

I always feel for a professional it's just another job. It's the same with working on your car, a garage has the official know-how of mechanics etc, but your car is just another one in a sea of hundreds worked on every day. Doing things yourself gives you a natural drive to want the best looking finish possible.

@craigyboi1979 Жыл бұрын

The electrician that originally installed our light, wired it directly in to the light itself, so was always a bit difficult to get the light replaced each time. So I added a junction box. I come here to learn how to do it and I found this incredibly helpful. You are a born teacher. Thank you so much for posting this.

@mastercontrol469 Жыл бұрын

Installed the light, wired directly into the light?

@DeanSmith3935 Жыл бұрын

Hi just wondering (obviously not an electrician), why couldn't you just feed the flex though the wall to a switch, why do you need a junction box?

@paulb9769 7 ай бұрын

I don't see how that made it hard to change the light and realistically how often will you be changing the light?

@Ryan.90 4 ай бұрын

@@DeanSmith3935 Those types of light come with a like 6 inch bit of flex usually. So you're going to need a junction box. There's another kind where you wire straight into the back of the light. (Also not an electrician lol.)

@tizthelocsmith4758 3 ай бұрын

@DeanSmith3935 Great question mate!

@annahabanna Жыл бұрын

I like how you explain: clearly and to the point in addition to the charming English accent😊I may do this project for my back garden in future. This weekend though I have to install a dog flap on my back uPVC door. I guess my main struggle will be the adjustment of the door panel thickness to the larger depth of the dog flap.

@TheDIYGuy1 Жыл бұрын

Thanks very much

@ncooty 5 ай бұрын

Another great video. You're an excellent instructor and presenter. In addition to all the other stuff (e.g., competence, structure), I also appreciate that you use a clear, natural speaking voice without the childish affectations so many KZfaqrs use. Well done all around.

@lisabevans2639 5 ай бұрын

Great instruction video! Thank you for not repeating yourself ad-nauseam. I believe I will subscribe! Cheers!

@indeed8724 7 ай бұрын

Earned yourself a new sub, I did very basic electrical training in college for a couple of months and this video is so simple to follow. Will definitely look into your channel more. Thank You.

@CH-en4er Жыл бұрын

great program. im 52 and took it step by step. worked a treat. thank you.

@TheDIYGuy1 Жыл бұрын

👍

@GaryThatsgary Жыл бұрын

Nice simple well produced video. Pushed both buttons for you. You can tell that you've watched a lot of American channels before starting yours because you "go ahead" and do things ALOT! 🙂

@TheDIYGuy1 Жыл бұрын

Thanks for that!

@fanfeck2844 Жыл бұрын

Brilliant quality video, and verbally superb instruction. A born teacher

@TheDIYGuy1 Жыл бұрын

Wow, thanks!

@sahidhussein9606 Жыл бұрын

Amazing innovations. We used connecters before

@julianbenjamin3695 8 ай бұрын

I knew nothing about installing lights...i just replaced mine using this video as a guide..welldone and thank you..light works perfect..

@TheDIYGuy1 8 ай бұрын

Glad it helped

@MarcusOliver2006 5 ай бұрын

Excellent vid. Subscribed. I only need to swap out an old Halogen for a new LED but now I know what all the wires do. Thank you

@jamesmontague4770 Жыл бұрын

Great video, very professional delivery.

@TheDIYGuy1 Жыл бұрын

Glad you like it

@alexpage7292 7 ай бұрын

Thanks for this video, I’m installing my new light tomorrow and I’ve used your links to get everything I need. Thanks for sharing.

@TheDIYGuy1 7 ай бұрын

Glad I could help!

@L2succeednow Жыл бұрын

Once again your videos are so easy to follow. I always come away thinkig.... I'm going to try that :)

@TheDIYGuy1 Жыл бұрын

Thanks, I'm glad you like my videos! Give this one a go

@alex1_matthews Жыл бұрын

Watched this video this morning. Trip to screwfix and I have 2 new outside lights. Thanks for the video 👍🏼

@TheDIYGuy1 Жыл бұрын

Nice 👍

@TheEXTREMEcleaningguys Жыл бұрын

Great video. Helped me out ALOT 👌👌😀😀. Clear and simple to follow. Great stuff 👍🏻👍🏻👍🏻

@TheDIYGuy1 Жыл бұрын

Glad it helped!

@drnh4444 Жыл бұрын

Superb video buddy. I've been trying to figure out how to install this using an indoor socket as a power supply but i think i have it susses now thanks to you. Cheers mate, well done!!

@TheDIYGuy1 Жыл бұрын

No problem 👍

@simonmaverick9201 5 ай бұрын

This is bloody fantastic!!!

@ZalthorAndNoggin Жыл бұрын

Thanks for the tip about the Stanley Fatmax Wire Strippers. They look awesome so I've just ordered myself a pair.

@TheDIYGuy1 Жыл бұрын

Good man!!

@ZalthorAndNoggin Жыл бұрын

@@TheDIYGuy1 Just to say the strippers arrived yesterday. Thanks for your recommendation [and how to use them]. Got to be the best DIY purchase I've made in a long time. Superb!

@sali6120 5 ай бұрын

Really enjoy your vids and would to thank you on the great tips you give regarding all DIY jobs around the house….A true Star ⭐️

@TheDIYGuy1 5 ай бұрын

Thanks 👍

@Russ1007 Жыл бұрын

Brilliant video, very well explained 👏

@TheDIYGuy1 Жыл бұрын

Thanks 👍

@magicmagic3747 Жыл бұрын

What a brilliant video

@mwansashericaezra6952 Жыл бұрын

Thank you for this video it's really helpful 🤗

@TheDIYGuy1 Жыл бұрын

Your welcome 👍

@exwhyz33 Жыл бұрын

Great instruction - Thank you

@TheDIYGuy1 Жыл бұрын

Your welcome

@JG-fg1ye Жыл бұрын

I planned to do this the weekend so happy days

@TheDIYGuy1 Жыл бұрын

👍

@harveysingh8690 Жыл бұрын

Thank you mate. Very helpful 🙏

@TheDIYGuy1 Жыл бұрын

No problem 👍

@xtomvideo 7 ай бұрын

Very well done tutorial.

@andyjackson2269 Жыл бұрын

New to your channel love your Vidoes, your first video I came across was glanding a SWA. Thanks for your Vidoes they are so helpful 👌👍

@TheDIYGuy1 Жыл бұрын

Thanks a lot,glad you like them

@BrodaPaul Жыл бұрын

Good step by step guide. Keep up the good work!

@TheDIYGuy1 Жыл бұрын

Thanks 👍

@peterash9524 Жыл бұрын

@@TheDIYGuy1thanks for video I have liked it and subscribed, just wanted to ask the far left box in the garage looks like a fuse box what is that for? Is it bcoz there's a more than spur so needs its own fuse ? Thank you Pete

@DjGiluk Жыл бұрын

Thanks mate great video again, cheers

@TheDIYGuy1 Жыл бұрын

Thanks a lot 👍

@FrancescoGarraffa-ex7zl Жыл бұрын

Great Video. Thank you.

@TheDIYGuy1 Жыл бұрын

Glad you liked it!

@andrewbeardsworth5461 Жыл бұрын

Great video 👍

@TheDIYGuy1 Жыл бұрын

👍

@hkmmagar617 7 ай бұрын

Good job 👏

@MuhammadAtif-dd8rl Жыл бұрын

Very useful video

@TheDIYGuy1 Жыл бұрын

Thanks glad it helps

@marcusregan4815 Жыл бұрын

Good vid, thanks

@TheDIYGuy1 Жыл бұрын

Your welcome

@apprentcepat 5 ай бұрын

great wee video well explained

@TheDIYGuy1 5 ай бұрын

Glad you enjoyed it

@denisconor648 Жыл бұрын

Great stuff.

@TheDIYGuy1 Жыл бұрын

Cheers 👍

@mickeymouse4897 4 ай бұрын

Some of the best DIY vids on KZfaq. Curious as to why you never silicone sealed the hole drilled in the junction box & hole u drilled thru the wall to stop moisture ingress & crawlies etc. Personally I use crimps in junction boxes to connect bare wire ends, not a fan of the Wago clips.

@andrewmorgan1802 Жыл бұрын

Great video. Our electrician mounted security light right next to the boiler flue so everytime the boiler comes on the heat off the flue triggers the light!

@acelectricalsecurity Жыл бұрын

Did he fit it where he wanted or did he fit where you wanted it. When I install anything I always ask or I am told before hand, if I see any potential issues then I will raise my concerns, but if a person is insistent on a certain position, then it's their problem.

@andyhawkes3335 8 ай бұрын

Pir don’t work on heat

@daveyboyh3107 Жыл бұрын

Really good video

@TheDIYGuy1 Жыл бұрын

Glad you enjoyed it

@alastairforsyth3820 7 ай бұрын

Very good video easy o follow.one thing though .I don't do metric .

@user-wg5hq3of3x 3 ай бұрын

Tip Top Video so informative

@TheDIYGuy1 3 ай бұрын

Glad you think so!

@subhashsingal2401 3 ай бұрын

excellent.

@TheDIYGuy1 3 ай бұрын

Many many thanks

@traceydeuchar7509 Жыл бұрын

Brilliant thank you, perfect explanation on how to wire up.🙂 save me £200 that an electrician wanted to charge me to fit 2!!!

@TheDIYGuy1 Жыл бұрын

Great, that's what this channel is all about

@user-lj5ln6dg5g Ай бұрын

Wow you’ve made that look very easy 😀 I’m going to try

@LeapOfFaith121 8 ай бұрын

Love it. Thanks. If I'm wanting to take a feed from a light switch in my garage to fit an outside light can I just take a spur straight from the light switch?

@MRMB1983 4 ай бұрын

Great video. 👌

@TheDIYGuy1 4 ай бұрын

Thank you! 👍

@sanddeeprudhra5597 4 ай бұрын

YOU..! My man are a fantastic bloke ! You have a pill/cure for every ill !. Great Skills Indeed. Thank You So very much and yes I have smashed that Subscribe and like and commented. Wishing you so much success in life. God Bless.🙏Namastae.

@TheDIYGuy1 4 ай бұрын

Thanks very much 😊

@richblack1216 10 ай бұрын

Thank you! This is a brilliant video for the installation. Im subscribing to your channel immediately. Can I just ask, should you drill any holes in the bottom facing side, to allow for any condensation build up to escape the box? Many thanks

@astralgary. Жыл бұрын

New subscriber, i think i need a better drill for Christmas , great video

@TheDIYGuy1 Жыл бұрын

Thanks 👍. Happy xmas

@xlfive Жыл бұрын

Excellent video and well presented,would it be good practice to seal the hole through the brick

@TheDIYGuy1 Жыл бұрын

Absolutely. I did this but couldn't put it into the edit due to my camera man messing up 🙈

@ZalthorAndNoggin Жыл бұрын

The DIY Guy? Nahh CUTE Guy...Deffo!!

@emfestudios3631 2 ай бұрын

Great video, just what I needed! What screws do you use please?

@kylem8053 Жыл бұрын

Great video! I don’t have a fuse spare switch in my garage , do I just add a fuse spare switch from the garage circuit or plug in the light to the sockets in the garage? Cheers

@harmoneedj Жыл бұрын

You sound like you're from my neck of the woods sir (norfolk) 😃 Great video

@TheDIYGuy1 Жыл бұрын

I am! Thanks

@selimekizoglu8542 Жыл бұрын

Could the cable go through the soffit instead of the brick assuming that drilling through it would have been easier?

@kvshrmchn9804 Жыл бұрын

Subscribed! You explained it really well. Thank you so much

@TheDIYGuy1 Жыл бұрын

Thanks for being a subscriber 👍

@R1chardH 4 ай бұрын

Excellent video. Do you have one that runs to a second light? or do u just get a bigger connector?

@notaclue Жыл бұрын

So would this be the same method behind installing one of the ring wired pir light cameras?

@roystonpereira2887 Жыл бұрын

Do you use 6mm plug for 6mm screws and 6mm drill bit? nice video

@shadowthegamer5978 Жыл бұрын

as an electrician, ive always found a step drill bit a hell of a lot easier than using a spade drill bit :) just food for thought, but otherwise good video! dont forget to backfill the hole with weatherproof silicone before you put the cover on as well!

@TheDIYGuy1 Жыл бұрын

I agree, unfortunately I didn't have one with me at the time of recording so had to beg steal and borrow what was knocking around. Cheers

@tsb3093 6 ай бұрын

The issue about using a sealant on the rear transit cable hole is exactly the concern I had after watching the video. The way it was left had seriously compromised the IP rating of the JB. An alternative would have been to use one of the side ports with a gland to pass the power supply cable through.

@themulchingman4412 6 ай бұрын

@@tsb3093twin and earth shouldn’t be exposed outdoors though so you have to put it through the back, then silicone it up

@pabgs4884 Жыл бұрын

Top man

@TheDIYGuy1 Жыл бұрын

😁

@afnankhokhar5578 5 ай бұрын

Hi, great video - I'd like to ask; is the junction box necessary? Can you not plug straight into the light itself (assuming you can remove the cable that comes with the light)

@samirmanir3188 2 ай бұрын

Firstly, another excellent video. Not only have you saved me alot of money but I'm now working around the house as a DIY junkie :). I noticed that the links for the WAGO link and Junction box items are unavailable from amazon, therefore would any IP55 junction box do the job ?

@tonyedwards7568 4 ай бұрын

Good video, My outdoor lighting has only a live and neutral connection? How would I connect this to the mains? Would i be able to just put a plug on the end of it and into a socket in my garage?

@Aceshighuk 7 ай бұрын

Great video thanks. I'm about to purchase the items from your link. I don't have a fuse spur in my garage. Would it be ok to use the 1.5 twin cable with a 13Amp fused plug to plug the light to a wall socket? Or should I use 2.5mm for the security light?

@nalinkothari466 6 ай бұрын

Good job! How much do you charge to install? Thankyou!

@leeguitarmcr 5 ай бұрын

Great video! Im just slightly confused with the connection at the end. Could the security light not be fed off the permanent feed instead of the load side of the fused spur? This then enables the switch to operate the outside lights only either side of the garage? Or am I missing a vital part somewhere in the video? Thanks.

@tk4270 Жыл бұрын

Which is a good UK brand of these kinds of lights that don't leak or burn out. Every led pir light I have had leaked rainwater or the led burnt out prematurely. An old halogen one I have from 23 years ago is still intact and works fine, but it costs more to run.

@kingofwebguru 6 ай бұрын

a great great video, on 11:03, is there a maximum number of twin & earth cables that can be wired into the power feed?

@user-kx8lj6ue5i 5 ай бұрын

Hi After some help please. Have a new build with outside light on the back wall. But want to add a spotlight with pir above the door as well. Can I get the power from this light somehow?. Thanks Brian

@BrunoTunes 5 ай бұрын

Neat! 👍🏻

@RC-oi1gg 6 ай бұрын

Hi. How many security lights can you run through a switched spur. For example can I run two PIR security lights off the same switch spur, or would they require individual isolation switches?

@lllCostalll 6 ай бұрын

Just to clarify, you have a 2gang switch one is for an inside light and the other is free, and did you connect the floodlight live wire to the inside light to share electricity? Thank you

@LT212-24 3 ай бұрын

Already have a outdoor light, but it’s not the brightest so wanting to swap for a new one, but can I add addition light fitting in a daisy chain to the same Switch so I can light up more area when I switch lights on?

@archiewiles5512 4 ай бұрын

Great stuff thanks! What about if it's going onto a wall that is already plasterboarded inside? I'd like to fit one to the front of our extension.

@TheDIYGuy1 4 ай бұрын

You’d need to do some more work to find a cable route. Thanks

@harryh2157 5 ай бұрын

Just a quick question....could I wire this to a plug socket instead? Also does the plug socket need to be on at all times for it to work? Hope you get this

@bol317 Жыл бұрын

Great video. Would a dewalt xr combi drill do the same job as that sds drill? Also if I drilled this into my house how do I make sure the drill bit doesnt go straight through into the room and plasterboard?

@TheDIYGuy1 Жыл бұрын

That's dependant on what your drilling into but I'm most cases a SDS drill is preferable. Measure the depth of hole that you need to make and then put a piece of insulation tape around the drill bit at the required depth. Stop drilling once you reach the piece of tape 👍

@paulsavage7289 4 ай бұрын

Hi im looking install Nest Floodlight Camera, taking power from an existing double Socket, could i create a spur double socket with a switch for the Camera and another socket for any appliances if needed? (like a cooker switch with socket attached)

@TrueBrit1 Жыл бұрын

quick question. I'm looking to install some outside lights to be powered by a plug and socket, rather than wired into a lighting circuit. However, the outside all lights I bought do not have an earth connection, and the instructions say it is not required (the lights are made of plastic, not a metal construction, if that makes a difference). So there is just a live and neutral. Is it ok to just use a live and neutral on the plug, and to leave the earth pin empty?

@oli230 4 ай бұрын

Thanks for this video. Can you tell me what that white switch box type is called please? I will be just wiring one light up. You said switch spur, is that what you ask for at the shop? Switch spur box? 😮

@Jeremyisyourhandyman 5 ай бұрын

I’m installing a Phillips hue floodlight. It says wall installation only but I am adding a junction box southside for the back porch steps. I have to make my own mounting plate 5 1/2 inches wide by 5 inches tall but the junction box is only 4 x 4.

@vitsin87 Жыл бұрын

Great video! I do have a question, can you just put the wire straight through the wall and use water proof silicon instead of using the box?

@davidhoughton2073 10 ай бұрын

You can but if the light fixture needs replacing, may be more difficult to remove/replace it. The junction box makes it that bit easier.

@paulb9769 7 ай бұрын

Most lights have weather proof seals on the box so yes you can.

@rokhsana7291 10 ай бұрын

Can you put the supply/feed cable straight into the light and discard the black cable completely? I have a light on the side of the house that has been wired directly, so no junction box.

@adamsala9291 6 ай бұрын

What size black cable did you use thanks.

@filmboxhd2837 3 ай бұрын

Hi, mate do you know why we need a junction box instead of wiring directly to a switch? Thanks😊

@DintClempsey Жыл бұрын

Is there any reason I can’t install the junction box about a meter to the side of the light? The H05 cable supplied with the light is rated for outdoor use

@WanderFeetChronicles 4 ай бұрын

How do you change the sensor settings? I’d like to know that. Thanks.

@martinsteele5171 Жыл бұрын

Hi I am trying to get my head around a problem. I have an led light bar rated at 860 w alledgidly. I am also using an ac dc transformer, when I put my watt meter on the 240v side it reads 80 watts ish. Is there a drop in wattage between 240 volt and 12 volt or is it as I suspect the unit is approximately 10 times less in wattage. Regards Martin steele

@HK_111 Жыл бұрын

I had an electrician fit a PIR light for me but it only works when my porch light switch is on. How do I get around this? Appreciate the help

@rosivison6526 9 ай бұрын

I see you have used a fused spare? Do you need to? I want to put an extra light outside my garage - it is a Ring spotlight that has to be hard wired and I already have a PIR light outside. Would it be acceptable to spur off a light cable and connect with wago clips and then connect the light and put it on a new light switch? It would be the same as you did when you put your extra loft lights in? Is that acceptable or do I need a fused spur?

@ef7480 Жыл бұрын

Maybe put the flex straight through the wall into the garage and use internal junction box?

@thomasneill.6101 4 ай бұрын

Can I add a plug to it and attach it to the plug in my outdoor shed which had it's one trip switch on it

@ArtSurroundsYouAll 8 ай бұрын

I am wanting to put a powered security light up on my garage but I do not have a spur on the inside of the garage, just a small consumer unit, 2 plug sockets and an indoor light. Could I wire up a flex cable connect to the twin and earth from the light connect them inside a maintenance free box and the other end of the flex put on a plug and leave it plugged into the sockets in the garage?.

@OpinionatedMonk Жыл бұрын

I have a question that no one seems to have answered - anywhere! I have an outdoor light with a PIR motion sensor. Works fine. The LED has gone and I can't solder. Can I replace just the light unit, AND keep the PIR (so I don't have to replace the PIR housing unit etc)? And if I can, how do I go about wiring this? Or is it just easier to replace both things, as they seem to come as a unit?

@VinnieTheVanno Жыл бұрын

Is there a reason you can’t just feed the flex through the wall and have the junction box on the inside? (Asking as I’ve done just that last week!)

@stendecstretcher5678 Жыл бұрын

Good idea.

@highlife_singh9541 Жыл бұрын

The junction box is to prevent against weather conditions in an electrical fault. Incase the flex is damaged. Thats why a IPX rated junction box is used.