No video

How To Install a SkutrNet Servo Buddy on a 15-17 Yamaha R1 from SportbikeTrackGear.com

  Рет қаралды 57,272

Sportbike Track Gear

Sportbike Track Gear

Күн бұрын

How To Install a SkutrNet Servo Buddy on a 15-17 Yamaha YZF-R1
Watch as Brian shows you how to install a servo buddy from SkutrNet on an all new 2015 Yamaha YZF-R1. Stay tuned for more instillation videos!
www.sportbiket...
Sportbike Track Gear is the #1 online eCommerce site for protective motorcycle apparel and performance parts. Buy popular brand name motorcycle helmets, riding gear, tires and parts at SportbikeTrackGear.com today! If you have any further questions post us a comment or send an email to orders@SportbikeTrackGear.com

Пікірлер: 124
@wyattp.6219
@wyattp.6219 4 жыл бұрын
Hey there, all these ‘15 R1 videos have been a great resource for me as I add mods to my newly purchased ‘17 R1. Keep it up! My bike came with an aftermarket slip on and connecting pipe, with the valve removed. I looked for the cables but found none. (No engine light at all). I go to see if the servo motor is still there and it is, plugged in, with no cables attached. I unplug it and immediately get the engine light on next key up (as expected). Plug the motor back in to see if light would go away, it does not... Should have ordered the servo buddy first! So now I have an engine light on until the servo buddy comes in.
@sportbiketrackgear
@sportbiketrackgear 4 жыл бұрын
You may need to go to the dealer to get the code cleared. Try disconnecting the battery to see if that will clear it, then install the servo buddy before you start the bike back up. - Van
@wyattp.6219
@wyattp.6219 4 жыл бұрын
Sportbike Track Gear oh wow, well that wasn’t what I was hoping to hear haha. Once the servo buddy comes in I’ll try that and see if it clears. There aren’t many dealers around me so I guess I’ll cross that bridge when/if I come to it. Thanks for the help!
@BadShadd1
@BadShadd1 9 жыл бұрын
I love watching Brian wrench on bikes. Just from watching him I was able to install stainless Spiegler lines on my bike and properly bleed it. Best youtube videos for wrenching on bikes. Keep em coming! Also I think Brian is the Vin Diesel of the bike world.
@sportbiketrackgear
@sportbiketrackgear 9 жыл бұрын
BadShadd1 Thanks for watching and the kind words! - Van
@adamcameron9029
@adamcameron9029 Жыл бұрын
Thanks so much for the videos Brian
@sportbiketrackgear
@sportbiketrackgear Жыл бұрын
You are welcome and thank you for watching! - Van
@joshecho9
@joshecho9 8 жыл бұрын
Thanks @Sportbike Track Gear for making these awesome videos. I ordered my servo buddy, BMC air filter, and Graves pipe from you guys. I hope to be installing on my R1 by today!
@sportbiketrackgear
@sportbiketrackgear 8 жыл бұрын
That is awesome! Let us know how you like it and thanks for the business!
@user-ub3or7uw8h
@user-ub3or7uw8h Жыл бұрын
I've seen this video many times now. Just finished installing Slip on and Link pipe on my 2018 R1. only issue is with the Engine check light. I will probably use scanner tool to clear it.
@sportbiketrackgear
@sportbiketrackgear Жыл бұрын
You need to make sure you do not turn the bike on after removing the exhaust servo BEFORE you install the Servo Buddy. If you turn the bike on before the servo buddy is installed the light will turn on and the code will need to be cleared with a scan tool. - Van
@drmurda
@drmurda 9 жыл бұрын
Thanks for the tutorial. Audio is good. Heard the 15 R1s are the best all around. Want to test ride one badly hahaha
@Shortcuttravels
@Shortcuttravels 8 жыл бұрын
Just installed this today, thanks for making it so easy. still waiting for my exhaust to come in but I noticed its louder with out the active servo
@sportbiketrackgear
@sportbiketrackgear 8 жыл бұрын
+GC8 No problem! Usually the servo will limit the air flow when at an idol, which explains why it is louder without. Thanks a ton for the comment and appreciation!
@r1rider174
@r1rider174 6 жыл бұрын
Hi Brian, thanks for all the videos! Would there be any diff to remove this on a stock bike? I am still breaking in m,y new 2016 R1S bike and waiting to put on 3/4 exhaust, but curious if it's worth removing servo first on stock bike and then adding the buddy.
@TBAGTOM
@TBAGTOM 9 жыл бұрын
Here's a new STG Video Drinking Game. Drink every time he says "bad boy".
@banditman97
@banditman97 3 жыл бұрын
Thank you for the helpful video. I will be removing the EXUP valve and servo from my 2020 MT-10 and installing a CAT eliminator and Servo Buddy,
@sportbiketrackgear
@sportbiketrackgear 3 жыл бұрын
You are welcome, happy to help out. - Van
@youngmonger4502
@youngmonger4502 3 жыл бұрын
@@sportbiketrackgear Van thank you so much for your incredible channel! Do i need a servo buddy for installing a slip on exhaust?
@googlesuxballsaxfukukunt4591
@googlesuxballsaxfukukunt4591 7 жыл бұрын
thanks 4 the vid..very helpful.. waitiong on my decat pipe and servo buddy.. Also totally agree with you on the ABS!!!
@TrackSol
@TrackSol 9 жыл бұрын
Great video. Can't wait to see what you guys do with this bike!
@rickyfromthe407
@rickyfromthe407 8 жыл бұрын
Great video ! Thanks. Just removed the exup cables from my '16 R1S. Always good tutorials!
@sportbiketrackgear
@sportbiketrackgear 8 жыл бұрын
Thanks for watching!
@bonc182
@bonc182 2 жыл бұрын
This video is great! Also the most over engineered battery compartment ever.
@sportbiketrackgear
@sportbiketrackgear 2 жыл бұрын
Thanks for watching! - Van
@pR1mal.
@pR1mal. 9 жыл бұрын
I have the flash tune rig and intend to disable EXUP in the ecu, but I bought a servo eliminator anyway because I didn't want to leave the bike's wiring harness with an open plug which could be exposed to weather, and I didn't want to leave the servo on the bike.
@mathis4103
@mathis4103 Жыл бұрын
Great Video. Can i keep the servo in and Just Plug the eliminator instead of the servo? Greetings Form Germany :)
@sportbiketrackgear
@sportbiketrackgear Жыл бұрын
Yes you could leave the servo in place if you like. IMO it makes more sense to remove it from the bike if it is going to be disabled. - Van
@survive.canada
@survive.canada 8 жыл бұрын
I love those videos. Very well detailed. Thank you.
@sportbiketrackgear
@sportbiketrackgear 8 жыл бұрын
Thank you! I really try my hardest to be thorough!
@Dreadzedan
@Dreadzedan 8 жыл бұрын
That motor is huge dang.
@nineteen74
@nineteen74 9 жыл бұрын
I met one guy with an R1M and he was saying after he put a servo buddy on it all the electronics stopped functioning. Any issues with traction control, lift control etc?
@ACXR6
@ACXR6 8 жыл бұрын
Hey Van, Love all your DYI videos. They are really helpful and have helped me along the way with my R6 project. Speaking of the R6, I know your dyi's are for the R1's. Is there much of a variation in terms of process between the R1 and the R6? Ex. Servo motor location, tear down etc. Keep the vids coming. Cheers :)
@sportbiketrackgear
@sportbiketrackgear 8 жыл бұрын
+ACXR6 Honestly there are a good amount of differences between the two as far as location, but mostly the general process will be the same.
@johnvencak573
@johnvencak573 2 жыл бұрын
Do you recommend a tune after removing this ? I have a slip on ,Oem headers, i was gonna remove this and add a link pipe. ? Would that be safe and okay? With servo buddy ??
@sportbiketrackgear
@sportbiketrackgear 2 жыл бұрын
It would be 100% safe and ok. This will keep the check engine light off. Make sure to install this before you start the bike or key it up. - Van
@grayfox117mk4
@grayfox117mk4 3 жыл бұрын
I just ordered one of these for my ‘18 R1. You have done great vids. Will the servo still allow you to change the modes? Or is the bike going to be stuck in one only with this servo?
@RealdealFlex
@RealdealFlex Жыл бұрын
Can you remove the O2 sensor the same way for an 18’ R1?
@sportbiketrackgear
@sportbiketrackgear Жыл бұрын
If you remove the exhaust sensor you will need to flash the ecu to turn off the check engine light. - Van
@Stan_in_Shelton_WA
@Stan_in_Shelton_WA 6 жыл бұрын
Exhaust system, air pump block off, servo removal, all done. How much weight trim did you achieve? Do you think the same process applies to an R1S?
@sportbiketrackgear
@sportbiketrackgear 6 жыл бұрын
Same process for the R1S end of the day. We did not total up the weight loss over all the projects (so many different parts installed on this project make that tough) but I know it is a metric shit ton for sure. The exhaust system is where the real savings is at, only a couple extra pounds with the block offs and servo elim. - Van
@TheRealReasons
@TheRealReasons 8 жыл бұрын
Is this still the best or only option for doing this once you install a 3/4 or Full setup?
@jessequintero2651
@jessequintero2651 3 жыл бұрын
Will the check engine light go off once u ride it a certain amount of miles?? I installed mine but the check engine light is still on?? I installed an s1r two brother exhaust
@sportbiketrackgear
@sportbiketrackgear 3 жыл бұрын
If you installed this on a 16 or newer bike after the check engine light came on you will need to clear the code with a scan tool. - Van
@jessequintero2651
@jessequintero2651 3 жыл бұрын
@@sportbiketrackgear thanks for the reply man I appreciate it. I’ll go ahead and get that code cleared up then 🙏🏻👍🏻
@chellouniquestyle
@chellouniquestyle 9 жыл бұрын
Amazing Videos! Thank you so much!!!!
@TheLBug22
@TheLBug22 6 жыл бұрын
I have installed the servo buddy but the check engine light is still on. Does it need to be ridden for the diagnostic to clear the code?
@sportbiketrackgear
@sportbiketrackgear 6 жыл бұрын
What type of bike do you have? Did you install anything else when you installed the servo buddy? - Van
@eaelife7889
@eaelife7889 6 жыл бұрын
hi! I have yamaha r1 2009 ! there is an error exupéry Saint-17-18 ( exupéry Saint-deleted) your device will fit 2009 motorcycle
@Paul-vh4xj
@Paul-vh4xj 6 жыл бұрын
Why do we need that connection when we disconnect the cable sir ?
@IHaveTheBestSon
@IHaveTheBestSon 8 жыл бұрын
where do you guys get your icon posters? lol. I know, completely unrelated. but I'm looking to cover some walls in my garage. and icon posters like what you have here are exactly what I'm looking for.
@sportbiketrackgear
@sportbiketrackgear 8 жыл бұрын
+MaTTyMaTT We got those years ago from our Icon Rep! I just checked and it doesn't look like we have anymore otherwise I would send you some!
@IHaveTheBestSon
@IHaveTheBestSon 8 жыл бұрын
+Sportbike Track Gear shit.. thanks just the same. I tried getting ahold of icon sales and got nothing there either. even went to local dealer. empty handed... just wasnt ment to be. keep these awesome videos coming on bike tear down/ installs.. watching your videos and the in-depth info in them has helped me tackle some of my own bike projects I never would have done myself otherwise. cheers!
@sportbiketrackgear
@sportbiketrackgear 8 жыл бұрын
We appreciate the input! We intend to make this stuff as easy as possible!
@Shortys01s
@Shortys01s 9 жыл бұрын
does this affect the power options on the bike? as well as traction control?
@SoleGFXTube
@SoleGFXTube 4 жыл бұрын
If I disable EXUP with the Graves ECU flash, the servo buddy is not required?
@sportbiketrackgear
@sportbiketrackgear 4 жыл бұрын
No you do not need to install the servo buddy if the ECU flash is used to disable. - Van
@m1000rrc
@m1000rrc 3 жыл бұрын
Does this also fit on my 2018 Yamaha R1M?
@sportbiketrackgear
@sportbiketrackgear 3 жыл бұрын
Yes this will also work on the R1M. - Van
@bigboyylucas
@bigboyylucas 9 жыл бұрын
I have a 2013 R6 and looking to get the M4 or MJS y-pipe do you recommend one of these over the other? Also should I only add the Servo Buddy or just get a Power Commander?
@ironDsteele
@ironDsteele 9 жыл бұрын
Good product but when Flash Tune releases their side harness for that bike you won't need the servo eliminator. You won't need a PCV either.
@sportbiketrackgear
@sportbiketrackgear 9 жыл бұрын
ironDsteele That is if you decide to flash tune. Some will and others will not. - Van
@ironDsteele
@ironDsteele 9 жыл бұрын
Yeah that's fair enough. I went for a flash tune on my R6 because of factory throttle restrictions that I could not get around with a PC5. Also since it was far cheaper and had war more options it was the logical choice. I recon you wouldn't have to worry about that with the R1 though, since all the electronics are adjustable.
@ToxicBeamer
@ToxicBeamer 7 жыл бұрын
Hey Brian i have a question for you about the servo buddy i have a 2015 S1000RR and i just gotten my Danmoto mid pipe for the bike and i was told i have to buy servo buddy and i have someone else tell me i am required to buy two servo buddy for the bike and not one. so if u have an answer for that it would help on the confusion for me
@PatrickKmetz
@PatrickKmetz 6 жыл бұрын
Hey Van, i eliminated my servo motor and installed the servo buddy but my check engine light is still on for the 2017 yamaha r1. Any ideas? Thanks!
@r1raulito
@r1raulito 6 жыл бұрын
PK Motovlogs Have you found a solution to the check engine light? Also did any thing else happen to being able to access the menu and different modes from removing the servo?
@picklz69
@picklz69 7 жыл бұрын
can anyone tell me what this modification is for? I just heard its for emissions.
@buica4658
@buica4658 7 жыл бұрын
please can someone help me here???? I bought an aftermarket headers/midpipes for my zx6r 2008 to conet with my two bros slip on. the pipe came with no holes( should have 2) i believe that holes are for the o2 sensors???? RIGHT????? does SkutrNet Kawasaki ZX-6R/RR 05-16 Exhaust Servo Buddy will do me good? so if I instal the servo budy i dont need to make holes on the pipe?\ THANKS IN ADVANCE
@Playaarrrr812
@Playaarrrr812 6 жыл бұрын
I heard that eliminating the servo of the exup leads to a worse response and also the issue that the bikes are running lean - in the sense of oil/petrol mixture. ( Especially on the Yamaha R6 RJ15) Does the R1 have the same problems? i m looking forward to hearing from you.
@sportbiketrackgear
@sportbiketrackgear 6 жыл бұрын
I rode the R1 several times previous to tuning it with an ECU flash and had no issues with the bike. To get the best performance out of the R1 we went with the FTECU Flash Tune which smoothed out the delivery making the bike more fun to ride. Best practice is to use a fuel controller etc... after installing a full system to get the most out of it. That said you do not have to do it immediately. - Van
@Playaarrrr812
@Playaarrrr812 6 жыл бұрын
Sportbike Track Gear Thanks for replying, Van. I understand that it is best to flash the ECU to get a smoother throttle response. I mean are there any negative points according to the r1 RN49 If you eliminate the exup without flashing the ECU? Does it effect the bike of Running Rich or lean?
@robledog
@robledog 6 жыл бұрын
are the servo buddies necessary or can my local shop flash the code off?
@sportbiketrackgear
@sportbiketrackgear 6 жыл бұрын
You can turn the light off with most ECU Flash Kits, typically run $300 - $400 depends on the model. This servo elim is much more affordable if all you are looking to do is turn off the light after installing an exhaust system. - Brian Van
@chodiusmaximus4042
@chodiusmaximus4042 4 жыл бұрын
do I need this for my 2019 R1 after getting a full exhaust system?
@sportbiketrackgear
@sportbiketrackgear 4 жыл бұрын
You will need this for that bike when removing the exhaust valve. Only other option would be to flash the ecu. Here is a link to the servo buddy on our site: www.sportbiketrackgear.com/skutrnet-yamaha-yzf-r1-02-17-exhaust-servo-buddy/
@badass1g
@badass1g 4 жыл бұрын
More trunk room FTW
@sportbiketrackgear
@sportbiketrackgear 4 жыл бұрын
Removing the servo motor really cleans things up in that space. - Van
@mertulusoy7630
@mertulusoy7630 8 жыл бұрын
How much weight saving?
@gsdreamwork501
@gsdreamwork501 4 жыл бұрын
Would this be the same process for my 2020 Yamaha R1 ???
@sportbiketrackgear
@sportbiketrackgear 4 жыл бұрын
Yes I would expect this process to be pretty much the same on the 2020. Make sure not to turn the key on until you have the servo buddy all plugged in so you do not trigger a check engine light. - Van
@bayshapso3534
@bayshapso3534 3 жыл бұрын
@@sportbiketrackgear hii . i got the check engine because i turned on the r1 befor i pluged it . how i can dellet this f1 for the dash . its stucked the mode rides. . . thank you .
@johnnyn7947
@johnnyn7947 3 жыл бұрын
@@bayshapso3534 use an odbII to clear the code
@charliewrightiii804
@charliewrightiii804 8 жыл бұрын
Is there a servo buddy for 2016 zx10r? and what does it do?
@sportbiketrackgear
@sportbiketrackgear 8 жыл бұрын
+Charlie Wright III The unit from the 2015 should work just fine for you. Basically if you change your exhaust and remove the servo motor your bike will likely throw an emissions code causing the check engine light to come on. With the Servo-Buddy it will trick the ECU into thinking the Servo is still working properly and will turn off the check engine light. thanks for the great question!
@carlomassimo3299
@carlomassimo3299 7 жыл бұрын
Hi Bryan..I have a R1S with akrapovich..Whats different make have a Skutrnet servo buddy? Thank you for your time
@sportbiketrackgear
@sportbiketrackgear 7 жыл бұрын
The servo buddy will work on the R1S no worries, same one. www.sportbiketrackgear.com/skutrnet-yamaha-yzf-r1-02-16-exhaust-servo-buddy/ - Van
@NZsarge1
@NZsarge1 9 жыл бұрын
Nice, by the way I've just been looking at the Graves videos and you said you'd measure the weight difference between the standard system and the new system, did you do that in the end? Plus the servo motor too..
@sportbiketrackgear
@sportbiketrackgear 9 жыл бұрын
NZsarge1 The weight savings is around 14 lbs with the exhaust and the servo motor. We weighed it and forgot to mention it during the video. - Van
@NZsarge1
@NZsarge1 9 жыл бұрын
All good, cheers.
@spcwilson79
@spcwilson79 9 жыл бұрын
Also the battery is held down by the plastic piece that you put on, not the seat. lol
@sportbiketrackgear
@sportbiketrackgear 9 жыл бұрын
spcwilson79 Man you all are tough, the bracket holds the seat and the battery. - Van
@spcwilson79
@spcwilson79 9 жыл бұрын
I'm just yanking your chain a little bit. Lol
@HermanRamlan
@HermanRamlan 9 жыл бұрын
How much does it cost??
@Dkflying1
@Dkflying1 9 жыл бұрын
If you kept the stock exhaust would you still have a service engine light? I'm doing a midpipe install on my 2007 R6 and I am leaving the stock exhaust. Wondering if I need this ex up removal on the stock exhaust to get rid of the service light.
@sportbiketrackgear
@sportbiketrackgear 9 жыл бұрын
Dante Klein If you plan to eliminate the servo motor and valve then yes you would need this to keep the light off. I think the valve is part of the stock canister and I have seen it wired open with the servo and cables removed.
@Dkflying1
@Dkflying1 9 жыл бұрын
But as far as getting a service light with just a midpipe install I shouldn't get one?
@thaiorr4723
@thaiorr4723 7 жыл бұрын
Hey van love the videos !! On my 2016sp r1 I still have stock pipes . If I get a servo buddy for my bike will it still run the same ? Or will it run better or shitter ?
@sportbiketrackgear
@sportbiketrackgear 7 жыл бұрын
If you have the stock system there is really no reason to eliminate it and it will like not function as well without it. Thanks for watching!
@ycui7295
@ycui7295 4 жыл бұрын
Bro, did you eventually test it without servo?
@EarthToNeff
@EarthToNeff 5 жыл бұрын
Installed this on my 17 R1 and it threw a code. I’ve ridden the bike to see if the ecu would adjust to the servo buddy but the light stayed on. Then I took the bike to the dealership to see if they can delete the codes it was throwing which was “P0476” and “P048D” as expected but they weren’t able to get rid of them, then I was out $77 dollars just for them to take my seat off. 😡 what can I do? I’m not sure if the actual product is defective or if it’s just the 17 R1 because I know they made changes with the obd.
@sportbiketrackgear
@sportbiketrackgear 5 жыл бұрын
Did you install it before starting the bike? It is also possible the servo buddy is faulty, this is not very common. - Van
@EarthToNeff
@EarthToNeff 5 жыл бұрын
Sportbike Track Gear yes I did but it still threw a code. I’ve had the bike sitting for about 7-8 months now because I’m afraid it will hurt the transmission.
@sportbiketrackgear
@sportbiketrackgear 5 жыл бұрын
We need to get your bike out of the garage. I called Woodcraft asking if they have had any issues with this Servo Buddy and they have not seen a repetitive issue with it. That said it could be faulty. Please shoot them a call or email (better to work with them direct to save time) 1.978.297.2977 or email to info@woodcraft-cfm.com - Van
@EarthToNeff
@EarthToNeff 5 жыл бұрын
Thanks so much for trying to do whatever is possible to help me get that thing back on the road and also on the track!!!
@stevenkistner7408
@stevenkistner7408 7 жыл бұрын
Hey Brian do you need to do this step if you use the FTECU to disable the EXUP? Or is the Servo different from EXUP?
@sportbiketrackgear
@sportbiketrackgear 7 жыл бұрын
No need to use a servo eliminator if the FTECU can disable it. - Van
@TheRealDjSilk
@TheRealDjSilk 9 жыл бұрын
where do i buy the servo buddy your site says The selected product combination is currently unavailable. What do i do or can you send me a link? for the right one?
@sportbiketrackgear
@sportbiketrackgear 9 жыл бұрын
TheRealDjSilk Here you are: www.sportbiketrackgear.com/skutrnet/exhaust-servos/ Thanks!
@duramaxyami5187
@duramaxyami5187 7 жыл бұрын
Will you still need the servo buddy if you get the ECU flashed?
@sportbiketrackgear
@sportbiketrackgear 7 жыл бұрын
Negative, the FlashTune stuff eliminates the need for the servo buddy. - Van
@benholland2175
@benholland2175 9 жыл бұрын
Do ya ever ride that thing
@CesarTorres-kt8co
@CesarTorres-kt8co 4 жыл бұрын
Can that work for a 2018 r6
@sportbiketrackgear
@sportbiketrackgear 4 жыл бұрын
SkutrNet Yamaha YZF-R6 02-19 Exhaust Servo Buddy www.sportbiketrackgear.com/skutrnet-yamaha-yzf-r6-02-17-exhaust-servo-buddy/
@Thafinest06
@Thafinest06 9 жыл бұрын
is there a video out there for a 2013 R1
@sportbiketrackgear
@sportbiketrackgear 9 жыл бұрын
Kerrin Payne Not that we did, the SkutrNet came out after we had the 2012 R1 Project Bike. The process is relatively similar from bike to bike. Thanks for watching! ~Aubrey
@Nihadkeso
@Nihadkeso 7 жыл бұрын
Hey man, can you just remove the cables, and reinstall the motor back on the bike? will that throw a check engine light on?
@sportbiketrackgear
@sportbiketrackgear 7 жыл бұрын
Yes there will be a light. - Van
@Nihadkeso
@Nihadkeso 7 жыл бұрын
No light came on my bike... I did the similar thing, just with the two bros pipe. When you remove the cat on the bike, will it do the bike any harm? I don't have the ecu flashed or anything
@flyingchicken33
@flyingchicken33 7 жыл бұрын
And today, we're going to deal with this "Bad Boy"!
@nineteen74
@nineteen74 9 жыл бұрын
I met one guy with an R1M and he was saying after he put a servo buddy on it all the electronics stopped functioning. Any issues with traction control, lift control etc?
@nineteen74
@nineteen74 9 жыл бұрын
I met one guy with an R1M and he was saying after he put a servo buddy on it all the electronics stopped functioning. Any issues with traction control, lift control etc?
@nineteen74
@nineteen74 9 жыл бұрын
I met one guy with an R1M and he was saying after he put a servo buddy on it all the electronics stopped functioning. Any issues with traction control, lift control etc?
@sportbiketrackgear
@sportbiketrackgear 8 жыл бұрын
Nope! I haven't had any issues with these. Thanks for watching!
When A Gang Leader Confronted Muhammad Ali
11:43
Boxing After Dark
Рет қаралды 7 МЛН
Пройди игру и получи 5 чупа-чупсов (2024)
00:49
Екатерина Ковалева
Рет қаралды 3,3 МЛН
Bony Just Wants To Take A Shower #animation
00:10
GREEN MAX
Рет қаралды 7 МЛН
7 Days Stranded In A Cave
17:59
MrBeast
Рет қаралды 81 МЛН
Yamaha YZF-R1M Dashboard & (YRC) Yamaha Ride Control Explained
6:53
How to wheelie for beginners
17:09
Gixxer brah
Рет қаралды 12 М.
Motorcycle Stand Comparison from Sportbiketrackgear.com
17:58
Sportbike Track Gear
Рет қаралды 51 М.
How to change your coolant in a 15-17 Yamaha YZF-R1 from SportbikeTrackGear.com
18:28
How to Flash Tune a 15-17 Yamaha YZF-R1 from SportbikeTrackgear.com
10:34
Sportbike Track Gear
Рет қаралды 56 М.
Is That A Bike Or Spaceship !!! Yamaha R1 Street Ride !!!
8:24
SuperBike Racer
Рет қаралды 557 М.
Пройди игру и получи 5 чупа-чупсов (2024)
00:49
Екатерина Ковалева
Рет қаралды 3,3 МЛН