How to Install a SunTouch Electric Floor Heating Mat

Рет қаралды 467,938

12 жыл бұрын

www.warmyourfloor.com
This Warmyourfloor video explains everything necessary to install SunTouch Floor Warming TapeMats. It highlights what's included in the mat kit, planning and preparation, installation, floor coverings, SunTouch SunStats, and final testing. This low profile installation provides true radiant under floor heating for tile, stone, laminate, engineered wood and carpet.
Made in the USA by Watts Radiant and designed for quick and easy D-I-Y installation.

Пікірлер: 27

@monicaduby1362 2 жыл бұрын

Such detailed description. Thanks for all the information. Awesome job

@salimsopari 4 жыл бұрын

great video. thank you!

@DIYApprentice 12 жыл бұрын

I got into a discussion on a forum with an electrician/inspector over some info in the installation instructions that seems to contradict the use of a 20A breaker for a mat that small. He said that he would fail an inspection if a mat that size were installed on a 20A breaker. Instructions: "The circuit breaker in the main circuit panel should be 15 amps maximum for a floor warming system totaling 12 amps or less. For larger systems up to 15 amps, use a 20 amp maximum circuit breaker."

@byrdsdoityourselfgarage7330 4 жыл бұрын

Cool. Simple to install. I'm going to use backer board over the floor tho. I'd never go directly on plywood/osb subfloor. Especially in a bathroom wtf

@michaelprimeau4900 4 жыл бұрын

Yeah, I agree.....probably a "just give them the basic idea" video. Obviously if you're installing tile, you'd have Du-rock and waterproofing membrane down first.

@GGBel1 Жыл бұрын

can you provide a link for the type of product you refer to? I'm about to install mine and was trying to find out if I need to install a sublayer to the thinset or not

@piezoman79 11 ай бұрын

Generally you can tile directly over plywood as long as it meets deflection requirements, but not osb

@rileypenner9114 8 жыл бұрын

can a person lay this product right on cement

@andrzejmroz7153 6 жыл бұрын

Yes you can lay this directly on cement but insulation are recommended insulation boards can save up to 95% of energy .

@rileypenner9114 8 жыл бұрын

yes, thx

@jimmymacpherson4507 7 жыл бұрын

Riley Penner ,

@daver3230 10 жыл бұрын

directly to OSB?

@szekelymihai 3 жыл бұрын

You should always pass the floor sensor through a tube in order for it to be easily replaced

@Rico702Vegas 3 жыл бұрын

How the hell you going to flatten a tube to fit under the thinset & tile??

@szekelymihai 3 жыл бұрын

@@Rico702Vegas You "dig" enough under it so that height of the cement you put over covers it. Plus, there are multiple size tube diameters.

@DIYApprentice 12 жыл бұрын

Does it make a difference whether I install the Sunstat Pro therm and mat on a 15A or a 20A breaker? I planned on running a 20A dedicated circuit, and I have a bunch of 12/2 wire I wanted to use up; I didn't want to use 12/2 wire on a 15A circuit. The mat I'm installing is only 10 sq ft.

@threeonamatchventura 6 жыл бұрын

IF I install a 20 amp receptacle on 20 amp/#12 wire,fed by a 20 amp breaker, ,then plug in a 5 watt light bulb to the receptacle, that is not a problem. There is plenty of power available ,opposite of a problem. You can also do what you suggested, Use #12 on a 15 amp breaker. The control unit gets powered first on the line side of the controller ,THEN "Drips" the power from controller to floor wire.

@bulletsnbrains 5 жыл бұрын

On this 15a v 20a issue... First determine the power required for the heating system in watts. Let's say 1500 Watts as an example. So 1500÷ 115vac would equal just over 13 amps. If the run is 75', NEC codes say 12g wire. You've got to take in account for the wire resistance and resulting voltage drop (based on distance to the panel) not to exceed 3%. There may be a code saying 14g wiring for only lighting circuits. Frankly, if you need to ask these questions, get an electrician. Wiring your house wrong could result in your insurance Co not covering a fire or other damage.

@stevenkipus1505 4 жыл бұрын

I oversize my wire all the time. Learn physics or don’t do the stuff

@moneytime4441 Жыл бұрын

how do you "burn" the subfloor ? wait until it drys then lay mat over the dry burned subfloor?

@jessicachristopher4230 10 жыл бұрын

We want to put this in a house that has tile and carpet now. We want to pull out the carpet and put this only where the carpet is will we see a significant difference in the height of the tile. another words, how thick is the product?

@GGBel1 Жыл бұрын

It's only 9 inches thick