Great video. A mate of mine does roofs & installs these if the customer wants. He buys the bastion vents from Bunnings & hits them with a can of spray paint (misting spray) pre install & then if necessary again when installed. You can’t tell it wasn’t bought coloured from a few metres away, let alone the ground. Saves $100 per vent
@projectlex Жыл бұрын
Thanks. Yeah nice, they are great for the price
@royvincentniepes37349 ай бұрын
man this is the easiest guide to follow! thank you!
@projectlex9 ай бұрын
You’re welcome, have fun with the install
@robertotis5173 Жыл бұрын
Don’t silicon all the bottom in order to leave a drainage hole.
@stuckster21 күн бұрын
Thanks. A roof blanket would also go a long way to improving the thermal properties of the roof.
@projectlex21 күн бұрын
Yes, you’re definitely right.
@paniadunn20432 жыл бұрын
So easy to follow! Thank you! 😊
@projectlex2 жыл бұрын
😁😁😁
@studentrajvir69703 ай бұрын
God Bless You Brother
@projectlex3 ай бұрын
Happy to help
@tinyhousediybuild359910 ай бұрын
Thank you so much for sharing. Very well done. Much appreciated. I had been wetting my pants about installing these on a tiny house, however with your demo thinking it will be a piece of cake.
@projectlex10 ай бұрын
You’re welcome & good luck with the install.
@juanlalvarez2542 ай бұрын
Thank you thank you 🙏
@projectlex2 ай бұрын
You’re very welcome
@bentot45 Жыл бұрын
Best tutorial is the simplest, what you did was perfect. Thanks for sharing.
@projectlex Жыл бұрын
Was my first ever video so a bit clunky. But thanks, appreciate it.
@edithdunn53282 жыл бұрын
So helpful! Thank you 😊
@projectlex2 жыл бұрын
Thanks. Stay tuned, more to come
@mrspeaker29262 жыл бұрын
Borat installs Whirlybird. And there's my wiife.
@projectlex2 жыл бұрын
Hi, my name a Borat. Very nice!
@jeoffer Жыл бұрын
Great instructional video. 👍 Subscribed.
@projectlex Жыл бұрын
Thank you, much appreciated. That was my first video so hopefully I’ve somewhat improved since then haha
@user-nu3wn7oc3i Жыл бұрын
Nice am from the Phillipines
@projectlex Жыл бұрын
Great stuff 👍
@leekellyplayle414011 ай бұрын
Great easy to follow video 👍 Would this type of vent be sufficient to install on a flat tin roof which is on a small room at the side of our house, which we use as a utility room here in england
@projectlex11 ай бұрын
Thank you. Yes definitely can install on a flat roof
@Cozcacuauhtli Жыл бұрын
THANKS
@projectlex Жыл бұрын
You’re welcome
@pablitopanes48724 ай бұрын
Wouldn't rain get through the vanes?
@projectlex3 ай бұрын
No, the design prevents that
@tariq_al_fahim1708 ай бұрын
The borat impression tho😂
@projectlex8 ай бұрын
😂🤣
@douglassteger85854 ай бұрын
Attic fan installation
@RevisionTrickzZ6 ай бұрын
Not sure why you had to go underneath to fit the actual whirlybird vent ? Got it to the adjustable shaft then fit shaft with screws ?
@periodofpeace Жыл бұрын
What will happen during rainy day?
@projectlex Жыл бұрын
The design is such that water is prevented from getting through the fins and into the turbine itself, regardless of whether it is a windy day, or the rain is heavy or light.
@MrArvin0306 Жыл бұрын
does water gets inside if there is like hurricane or typhoon, rain together with fast wind?
@projectlex Жыл бұрын
Hi Arvin. Don’t have such severe weather events like that where I live. Do get heavy rain & wind & had no issues.
@SK8ERguy19952 ай бұрын
How many hours did this take you to install from start to finish?
@projectlex2 ай бұрын
Was 2 years ago sorry I can’t recall. Also when I’m filming it takes a lot longer than normal.
@vin825152 жыл бұрын
Yeh boiiii time to cut holes in my roof 🤣
@projectlex2 жыл бұрын
Yeahhh!
@ianrusseladem6752 Жыл бұрын
Hi, I would like to ask a question. I already installed 1 Whirlybird. And planning to install a ceiling exhaust fan. My question is, since I already have a whirlybird at the top of our roof, is it still necessary to add a separate duct for the exhaust fan? Or is it ok to just let the whirlybird suck the hot air from the exhaust fan?
@projectlex Жыл бұрын
Hi Ian. Yes require a separate duct
@ianrusseladem6752 Жыл бұрын
@@projectlex Thank you
@projectlex Жыл бұрын
@@ianrusseladem6752 no problem
@shalashaska9701 Жыл бұрын
Is this hard to maintain? Does it need to be lubricated at some point to keep on spinning and will small leaves enter? Im thinking of installing one but worried about water seeping and leaves entering
@projectlex Жыл бұрын
The design is such that water & leaves are prevented from getting through the fins and into the turbine itself, regardless of whether it is a windy day, or the rain is heavy or light. No lubricant required unless it stops spinning when there’s wind
@trevorgillett61853 ай бұрын
So how do you get to the part needing lubricant? Pull it all apart ?
@sadanand6050 Жыл бұрын
Cost of this producr
@projectlex Жыл бұрын
Hi, the details are in the video description
@WanLobey2 жыл бұрын
🙏🙏🙏🙏
@projectlex2 жыл бұрын
😃😀😀😀
@CuzzinCoo11 ай бұрын
The sound of the drill vibrated my skeleton 🫨😅
@projectlex11 ай бұрын
Sorry mate, first video & had no idea how to edit them… still not the greatest lol