How To Install A Winch | Kings Domin8rX Into an Ironman Bullbar

Рет қаралды 27,315

Күн бұрын

In this video, I'll show you how to install a winch into a bullbar. This is a Kings Domin8rX 12,000lb winch that I fitted into the Ironman bullbar that's on my Nissan Navara.
The install required the removal of the bullbar, so if you are considering a winch when selecting a bullbar, it would make the process a bit easier by installing both at the same time.
Besides having to cut the bumper bar below the grill, to fit the winch, the rest of the install was fairly straight forward.
Having a crane to support the bullbar, made this a one person operation. If you don't have a crane, I'd suggest getting some help with the bullbar.
As noted in the video, there wasn't a fairlead in the box, so always enquire about the supply of one, because you shouldn't use a winch without a fairlead, as it protects the winch rope from nicks or sharp edges on the bullbar.
During the winch tensioning, I measured the current draw by the winch and it was 136 amps....that's why you need to have your engine running when using your winch!!
If you like my videos and you would like to help support my channel, please consider buying me a coffee...your support is greatly appreciated , thanks. www.buymeacoffee.com/rustyadv...
Music credit:
Insiders by Joe Crotty | / joecrotty
Music promoted by www.free-stock-music.com
Creative Commons Attribution 3.0 Unported License
creativecommons.org/licenses/...
Higher Octane - Vans in Japan.
KZfaq audio library
If you liked the video, please give it a Thumbs Up. If you would like to subscribe to the channel, hit the Subscribe button and hit the bell icon to be notified of upcoming videos.
Thanks for watching and I'll catch you in the next video.

Пікірлер: 56

@trainstrains1 2 жыл бұрын

I purchased a Dominator Extreme winch a couple of months ago and had it professionally fitted into the bullbar only to find it was dead out of the box. Kings did give me a new one but now I have to remove my bar and install the replacement, Thanks for showing me a few things that will make it easier.

@RustysOutbackAdventures 2 жыл бұрын

Bummer about the winch being dead, but hopefully it won't take you too long to replace it. Glad my video was helpful.

@aahf6309 3 жыл бұрын

You made it look Very Easy to install the winch -virtual installation process .Thank you

@RustysOutbackAdventures 3 жыл бұрын

I hope the video helps you with your winch install.

@danielbaxtrom3001 Жыл бұрын

Happy to see you defeated the virus mate. Up here many good quality winches don't come with fairleads as they are used in so many different applications many of which aren't even mounted on vehicles. Usually they ask what it is being used for and will recommend one or 2. Love the videos. Cheers from Alberta Canada ✌

@RustysOutbackAdventures Жыл бұрын

Hi Daniel and thanks for your comments. The shop where I bought my winch from, specialises in 4WD, camping, etc. so any winch they sell is almost certainly destined for a 4WD. I'm guessing the weather in Alberta is quite cold this time of the year, as we're heading into our summer....no doubt we'll be having close to 40C days soon.

@TheOldaz1 2 жыл бұрын

Excellent instructional at the right time, I have an ironman bar on my D40 and looking at a kings winch for it. Perfect timing, thank you.

@RustysOutbackAdventures 2 жыл бұрын

Thanks TheOldaz1, I'm glad you found the video helpful. Good luck with your install and make sure you get a fairlead with your winch!!!

@xavier8366 2 жыл бұрын

This was a ripper of a tutorial mate, thanks for sharing all the trips and gotchyas.

@RustysOutbackAdventures 2 жыл бұрын

Thanks Xavier, glad you like the videos....I enjoy making them.

@paulneal8751 3 жыл бұрын

Enjoyed the video. Real-world process. Thank you.

@RustysOutbackAdventures 3 жыл бұрын

Thanks for your comments, Paul. I hope you found the video helpful if you're thinking of installing a winch.

@GavinClarkdiy 3 жыл бұрын

Another good video mate, well done.

@RustysOutbackAdventures 3 жыл бұрын

Thanks Gavin, I enjoyed making this one.

@razzdixon8323 7 ай бұрын

Very helpful thanks 👍

@RustysOutbackAdventures 7 ай бұрын

Thanks, I'm glad you found my video helpful.

@tingpranav999 Жыл бұрын

Hi Rusty - just about to do the same install but on my 2013 Dmax with Ironman Bar - have pulled a few panels off and looks very similar to your Nissan so thanks for posting your very informative video and will now go next door and get my fussy panel beater mate to assist - you, him and me are the same with lining things up exactly! - just an FYI - the Kings Winch Kit with the white rope (instead of orange rope) has the fairlead included - thanks again and hope your trip up north went well!

@RustysOutbackAdventures Жыл бұрын

Hi tingpranav999, I'm glad you found this video helpful. Yes, lining things up properly is very important...well, it is to me, and it sounds like it is to you, too. Hope your install went well. I would expect that any winch company offering their products, should include all required parts...doesn't make any sense to me, to leave out vital bits.

@hutchinsonsadventures4678 3 жыл бұрын

very informative mate.

@RustysOutbackAdventures 3 жыл бұрын

Thankyou....hope it helps if your thinking of installing a winch.

@davidfaraday385 Жыл бұрын

Excellent video thanks

@RustysOutbackAdventures Жыл бұрын

Thanks David, I hope you found it helpful.

@TriNguyen-qq5ul Жыл бұрын

Great job

@RustysOutbackAdventures Жыл бұрын

Thanks Tri, I hope you found the video helpful.

@MrJohnno1969 2 ай бұрын

nice job I'm doing my 80 soon. and I agree fairleads should be included in the box. but kings is a budget brand that's probably why you didn't get one. thank you again for the video. and I'm in Brookdale do you want to come and give me a hand lol.

@RustysOutbackAdventures 2 ай бұрын

Hi John, glad you found my video helpful. Would love to come and help you install your winch but I can't find Brookdale on google maps, haha!

@conmanumber1 2 жыл бұрын

Apparently you will need to get a wheel alignment to compensate for extra weight. I have a Nissan Navara D40 diesel which I fitted a Ironman Commercial deluxe Bullbar and love it. The D40 Nissan Navara (Frontier) was phased out here in New Zealand a few years ago but it's only phased out in the United States in 2021 so basically I still have a late model vehicle. I changed tires to Toyo open country A/t's which are very durable tires. My machine is 6 speed stick shift which is horrible to reverse as it's high gear. To make these vehicles run way smoother and more reliable I changed all my lubricants to Amsoil Signature series diesel oil with a very long extended drain interval.

@RustysOutbackAdventures 2 жыл бұрын

I did the GVM upgrade after I'd fitted the bullbar, but you're correct in saying that a wheel alignment would be necessary with the addition of a bullbar and winch.

@894runa 2 жыл бұрын

Perfect vid👏. I have the same car, same bar & I'll prob get the same winch.

@RustysOutbackAdventures 2 жыл бұрын

Hi John, it's a fairly easy install. Just take your time and you shouldn't have any problems. You might have to rotate the clutch lever to suit the location...and make sure you get a winch with a fairlead, or at least buy one when you buy your winch.

@894runa 11 ай бұрын

Managed to sneak it in without removing the bar or body panel but had to cut the same as you. Multi tool was perfect for cutting. Fitted a 9500lb though so that might have been the difference

@flacky93 3 жыл бұрын

Great stuff mate glad i own an arb summit bar on me np300 🤣 drop the bash plates and slots straight in without droppin the bar but great work matey 👌🏽 also u can rotate the clutch assembly to before u put it in

@RustysOutbackAdventures 3 жыл бұрын

Thanks Dane. I should have fitted the winch when I had the bullbar installed....but where's the fun in that!!!

@flacky93 3 жыл бұрын

Haha thats it mate all in good time 👌🏽 love your channel keep up the awesome work 😃 im acually currantly getting a tray built for my np300 nav steel tray fully kitted out then getting a full canopy and dogbox later on

@RustysOutbackAdventures 3 жыл бұрын

@@flacky93 sounds good. Just keep an eye on your total weight....that's why I did the GVM upgrade because the Navara only came with a GVM of 2805kg.

@flacky93 3 жыл бұрын

@@RustysOutbackAdventures np300s 2910 im pretty sure but ill weigh it up later on see what it is then get a gvm upgrade 👌🏽

@rodney9585 2 жыл бұрын

When they fitted the winch bar they should have cut the bumper to suit the winch. Any way good to see you in action anyway 😀

@RustysOutbackAdventures 2 жыл бұрын

I thought the installation of a winch would have been pretty straight forward....but that's not the way these things happen, unfortunately.

@vrjohnny Жыл бұрын

This is a good video to follow! So , just a question. On last, why did you pull out the rope for after put back in ? I bought today the same winch! Appreciate to saw everything that I need ! Thanks mate

@RustysOutbackAdventures Жыл бұрын

I'm glad you found the video helpful. The reason for pulling out the rope and winding it back again, is to put some tension on the rope, so when you do actually use it to winch yourself, the rope has been 'pre-tensioned'...making it work and spool better.

@SuperPigHunter 2 жыл бұрын

Cheers kiaora bro good video! Have you used the winch out in the bush yet, looking at buying the same winch, how does it perform. Cheers mate.

@RustysOutbackAdventures 2 жыл бұрын

I haven't had an opportunity to use the winch yet. I should go out and try it, just to make sure I know how to use it, should the need arise!!

@DGDK23 3 жыл бұрын

Great video, just a bit worried about that power cable so close to the engine?

@RustysOutbackAdventures 3 жыл бұрын

Thanks Drikus. I've been looking at re-routing the cable....thanks for your observation.

@OTPpride 2 жыл бұрын

Well, planned on doing this myself. Will be paying someone to do it.

@RustysOutbackAdventures 2 жыл бұрын

It wasn't really that hard to do, but it took a bit longer than I thought it would.

@bloffy2883 2 жыл бұрын

Hey rusty was just wondering why you had to keep your bumper bar doesn’t the bullbar normally cover where your bumper normally is or is that just a navara specific thing

@RustysOutbackAdventures 2 жыл бұрын

Hi bloffy 28. The lower section of the front 'bumper' gets cut off to accommodate the bullbar. The other option was to remove the whole front plastic 'bit' but I don't like that look.

@craigwarne9543 8 ай бұрын

Mine came with the fairlead in the box. Interesting that yours didn’t.

@RustysOutbackAdventures 8 ай бұрын

Thanks Craig....maybe I should have looked closer in the box before I bought it. I'll know better next time.

@georgevenet-sanos1847 Жыл бұрын

Different packages with winch with or without the fairlead

@RustysOutbackAdventures Жыл бұрын

When I bought the winch I 'assumed' it came with everything...silly me for not checking first. I'll definitely know for next time.

@rustywalsh56 3 жыл бұрын

Nice video, not as straight forward as you thought, when installing the solenoid box are you a perfectionist or pedantic in your work. As you said it would bug you being off center, and please dont take it the wrong way. And yes they should include the fairlead with the winch as a package

@RustysOutbackAdventures 3 жыл бұрын

Hey Russell, all good!! Yes, it would bug me if I mounted the solenoid box 'off centre'. Apparently, the Domin8rX Extreme winch has the fairlead in the box.

@SalvoDan Жыл бұрын

The Domin8r X does not include a Fairlead. The Domin8r Xtreme does and is a bit more expensive. Unless you already have a fairlead, or have a specific fairlead you want to use, like the Yankum Ropes Groove Fairlead, it is a no-brainer. Pay the extra $50, get a better brake, remote control, better rope and a $30 Fairlead for “free”.

@RustysOutbackAdventures Жыл бұрын

When I bought the winch, I wasn't aware there was an Xtreme version, otherwise I probably would have bought it. For the small difference in price, the 'extras' are definitely worth it.