How to Install a Windshield Washer Kit on a Can-Am X3 64 inch RC, Base

Рет қаралды 15,786

3 жыл бұрын

How to install a windshield washer pump washer fluid reservoir bottle kit on a Can Am X3 RC Turbo. Watch before you buy! How to install a window washer on a Can-Am X3 64 inch RC, Base, XMR! Please like and subscribe and follow along on this next project build the BLUE REAPER! This is a educational video for a 2019 Can Am Maverick X3 RC Turbo 64 inch unit.
UTV DIRT Swag!!! It's finally here!!! Show your support and visit our Merch store to get your custom UTV DIRT swag today!!:
click.teespring.com/wf/click?u...
Follow us on Instagram:
/ utv_dirt
#ad
amzn.to/2SoxmdB

Пікірлер: 22

@ntoxic8edx 2 жыл бұрын

Go get you a 2001-2006 ford escape rear wiper motor it was a way better 172 degree sweep and would get your whole window.

@peterpk6991 3 жыл бұрын

Good little washer kit , it will definitely come in handy out on the trails . Hope all is well Mr Mike and the boys.

@UTVDIRT 3 жыл бұрын

Thanks Peter! Yep for the price of the kit you cant beat it. Thanks for watching!

@d.maisel8063 3 жыл бұрын

Did you have to trim the plastics after flipping the shocks? Just ordered the washer kit for my BM 2.0 windshield so curious how it has been doing since your install and your trail rides.

@UTVDIRT 3 жыл бұрын

No I didn't have to trim the plastics because mine is the 64 inch model. I believe on the 72 inch models the plastic will need trimmed.

@2012Electric 5 ай бұрын

Where you got the power for the wiper and the reservoir

@dustinkurtz9939 Жыл бұрын

Can you show final install location? I can't find a good place to put mine. I have a similar machine but orange. I'm thinking Velcro instead of zip ties but wanted to see your final. Did you drill holes to run the zips through or what? I just can't see how you connected it without obstructing the mount onto the bracket. Thanks!

@UTVDIRT Жыл бұрын

I don't have a picture of it but if you look at time mark 5:32 in the video it shows how I mounted it. Hope this helps. Thanks for watching!

@redneckwarriors1 3 жыл бұрын

what size light bar is that yall got attached to the shocks

@UTVDIRT 3 жыл бұрын

It is a 10 inch Baja Design light bar.

@josesolis4505 2 жыл бұрын

Ok...so where did you get the kit from (Important ilnfo) and how much?...I'm in the process of getting one and I'm curious...THANKS!!

@UTVDIRT 2 жыл бұрын

I have links in the description of the video for all parts.

@saywhen8582 3 жыл бұрын

Wow all that work for a washer, good job though

@UTVDIRT 3 жыл бұрын

Yeah it wasn't to bad. Probably took about an hour to do the job. Thanks for watching!

@steveoptebeke2955 3 жыл бұрын

Nice job, I'm going to do the same. Question what is that controller you have that you used for the Switch, I'm looking for something similar.

@UTVDIRT 3 жыл бұрын

@@steveoptebeke2955 Thanks! I did a video on the Feniex Controller when i installed my chase lights. Check it out.

@goldenninja007df 2 жыл бұрын

How do I wire the switch if I want to use the switch they give me? the ground goes to the bus bar ground where does the other wire go?

@UTVDIRT 2 жыл бұрын

You have to run the switch wire and washer pump wire together and run it to the hot to get power.

@sfunk3 2 жыл бұрын

Would have been nice to see it actually work

@UTVDIRT 2 жыл бұрын

Did you actually watch the whole video? I demonstrate it working at 11:37 mark in the video.

@Casperarizona Жыл бұрын

So the machine works the exact same by flipping the shocks? Its no big deal?

@UTVDIRT Жыл бұрын

Yes no problem at all.