Just want to say thank you! I know this video was made 5 years ago and I’ve been watching you a long time! I’m a 61 year old woman and I have a 30x50 pole barn with metal roof! After watching your video- I knew I could do this! And did finally this last weekend! Because of your video saying just do it. 🔥

"Agricultural Situation" love that! Thanks for the great video. I am installing a wood stove in my cabin. Stay warm!

We had a wood stove just like that one! We love it, keep us warm in the winter.

Just what I needed. Going to be doing exactly the same. Great to see someone else do it first.

Just bought a second hand wood stove for my little outdoor family area. Didn't know how to cut the metal roof, now I know. Thanks mate.

"This is an agricultural situation" Love it.

I'm going to fix my mother-in-law's wood stove pipe this way. That insulated piece of pipe is awesome. Puts me at ease because the boot won't get much heat. Class A.

Love the video. It made the install a lot nicer and also save me some money. Great for my woodshop. Thanks Ron

Found this video at just the right time--I'm putting in a chimney pipe for my blacksmithing forge in my not-really-to-code-either smithy in the backyard. You answered ALL my questions and showed just the right amount of detail for me to feel like I can do this myself! Hell, I already built the whole 8x8 smithy myself! Not bad for a 52-year-old lady!

I wish i found ur video 100 videos back! Thanks man just what i was looking for!

If you shine a light thru the pipe to the roof it will cast a nice elliptical shadow on sloped roofs so you know where to cut.

Nice install. Here's a tip for cutting round holes in sloped surfaces. You need to cut oval to get the same clearance around the pipe, because your string changes length in relation to level as you rotate on the angle of the roof. Bet the chimney was tighter on the top/bottom than the sides. Mark the ceiling straight up from the edges of the pipe.

one off the better video's​ I've seen brilliant job simple explane well done

Looking forward to cutting a hole in the roof of my little shop now. Thanks for the video!

Thank you so much. Your tutorial has been very helpful. God bless.

glad to see someone out there is using the right flashing for metal roofs! always see attempts to make a metal cone flashing work. looks good!

I thank you for making this video! I've been holding off on finishing my stove because I am scared to cut a hole in my metal roof. This video gave me some reassurance. Like you said, their isn't many leads when it comes to putting a stove in a metal building!

Thanks for sharing josh! Very informative 👍

love the flashing product, thanks for video, might give this a try

Thank you Sir, from Morin Heights Québec, Canada

Very informative video. Thank you and Merry Christmas!

Great video! Thanks for posting it.

Right on buddy 👍 good clear directions.

Having put 2 Vermont Castings in a pole barn, the chimney must have the Silkirk (unless you're using the other brand) Adjustable Ceiling Bracket JSC6RS. It hold the chimney up. Then the ceiling mount box, supports the black wall pipe. Got to be fairly close to installation code, or your Insurance Company could likely deny a claim. Also, have the insurance co come out and do an inspection, so it is on file. Menards has all the parts. We bought our stoves new, years ago, but the local stove retailer/installer would not do an install because we didn't buy it new from them. Stuck learning a lot on our own. Selkirk has a great tech support/install dept. It is not easy going from a house to a pole barn install. Did go with the Dektite #8 boot instead of the Selkirk, just not the quality expected.

Good job. Sure helped me out. Thanks for the info !!

Vintage stoney ridge!!!!!

Thank you! You saved me some time I appreciate it!!!

Great vid, just what I needed, thanks!

Great job!

Great Job Josh 🇺🇸

"I'm not too confident on what I'm doing" at least he's honest. You did a great job man, professional!!!

Great video! Really helpful.

Nice work!

Thank you, good information & video...

first time I've seen a plumbob used. thanks

When I installed mine in my wood shop I went thru a secure transition box and positioned the pipe 2 feet above the nearest surface that was 10 feet from the center of the pipe.

Just as food for thought, if you work on gasoline equipment in your shop, the stove should be setup 18-20 off the ground, to keep from igniting gasoline fumes.. This is code for natural gas water heaters installed in garages.. Just don't want to see anyone get hurt.. Great job..

"this is an agricultural situation" lol I love it. Going to have to use that in the future.

Cool Ive got too do this soon Got my heater and Nearly all the Pipe Just Waiting on some Insulated Pipe too go through the roof , Im a Iffy too about cutting My Roof don"t want any leaks LOL ,Cool well done thanks for the Info

Thank you very helpful

Should of held a piece of pipe up there. If your roof is angled your hole will not be a perfect circle, it will be an elliptical cutout. Hold a pipe straight up with the "wall" side edge touching the roof (leaving the opposite side will be a couple inches from the roof). Make your guide marks from that.

Great video. Also shout out to SolDuc hot springs! My hood!

Thank you for sharing. Very informative.

"and/or if I just wanna come out here and cook a pot of beans...... 'cause thats what I wanna do" HILARIOUS!! Thanks for the morning laugh.

Great video, really appreciate the time you took to make it. That adapter.. the one you used to hook your single wall to double wall pipe. Does it have a technical term? Reason I ask is because I'm having a hard time finding it for online purchase. I'm looking for one for 8" pipe.

👍thx for the video👍 always fun to watch along w/ being educational✌️

Nice Vid Dude, Thanks!

Iv put in many of wood stoves in my day. I always cut the hole in the roof first. Then move the stove to fit. But each to their own

Great job. Keep an eye on your cap. My son installed one and the screen creosoted shut in short order. His is a much taller installation.

Thank you

Job well done..Can you do a video on the blower motor also..thankz..

Thank you! I'm doing this exact thing in my agricultural non-code required building. I was nervous to go through the roof, but much less so now! Sadly I'm stuck at finding a stovepipe to chimney adapter as my outer wall for the chimney is 10inch triple wall. The companies just tell me i must frame it in. 😂 no way I'm changing or adding structural.

Was there an option for a storm collar to deflect rain from the rubber flashing? May be an option you can still add on and would help protect the rubber gasket.

Josh always try to layout the Dektite so water flows around both sides and doesn’t dam against the roof ribs

Great video thanks! I noticed a channel (at the 14.19 mark) outside base of the base flashing. Will water collecting in that channel quicken corrosion over the life of the flashing?

Wood stove firebox should be raised 18” off the ground when installed in a garage or shop in case you spill flammable liquids and should also be in a location where it cannot be hit by a vehicle, especially since the stove is holding up the chimney(not to code)Also the rubber flashing is not rated for the high heat that a wood stove gives off. I understand this is a “agricultural situation” but this is fire and codes are there to keep you and your family safe. I could go on about what is not to code but I would just like to say get it professionally done. Stay safe.

Thanks mate! doing my pizza oven flue this weekend here in Sydney Australia thanks to your video. I haven't posted my 2nd video yet but you can check out part 1 of my brick BBQ / pizza oven video if you like

Thanks for the video, I've got a stove on the way for a Carolina Carport building. Off subject question is regarding the gutters on your building. Could you provide some info on the gutter installation. Thanks from SC.

WOW really nice video Josh and you really make it all look pretty easy too : ), can you tell where you found the orange cone gasket thingy ? i am getting ready to install a woodstove in my shop because for the past 5 years i have been working in a snowmobile suit because o fthe cold, so i built a nice riding lawnmower for a guy and traded him for a like new woodstove , just today i got a ladder so i can finally reach the roof and now after watching your cool nice video i am excited to do mine and get a fire going. Where i am people are constantly throwing out nice hardwood pallets so it will be free firewood for me just a little work cutting them up is all. Well thank you very much and hey can you make a video showing your fire in your stove ? that would be really cool, have a nice day Josh, hope your stove is keeping you and your friends warm during the cold, i'd also love to know your "pot of beans" recipe : ), i used to have a 4 bean soup that was great with corn bread. !!

Josh how is the stove working out... just watched the video, and you could have put some cement board between the stove and wall to keep the wall cool... Good shop video... Chief {NYS/ADK}...

Sweet sweatshirt 😁 love that place

Great video. I think my new building in KY is the same as yours. Was your's from Carolina Carport? 30' x 60'. Great building and a great value. I was wondering if that angle across your roof near the edge is a snow break. Where did you get it? I also insulated the roof of my building to reduce/eliminate the condensation. I did 2/3 of the roof with the rolls of radiant barrier insulation. I ran out in the middle and could not get more locally so I then finished with 1/2" foam board radiant barrier from Lowes. I cut chipboard into strips and screwed them to the runners between the roof trusses and then stapled the radiant barrier to the chip board. Worked well until the ends at the eves where I could not get a stapler into . The foam board was much easier and looked better at the end. Cost was about the same for the material, but installation was much easier with the foam board. Just used fender washer and screws to attach to the chip board. I've not seen any condensation since installing the insulation.

Hey man! Great video I’m just about to do the same thing but wondering how you’re screws are tight without anything underneath your tin?

How has the roof flashing held up since it was installed?

What's done is done, but my question is why wouldn't you measure your double sided wall pipe and add just a 1/4 inch from center. This would give you half inch larger hole for easy installation and not have such a large excessive hole. Just curious. Love the video.

Dude I love your videos hahahaha we need to drink a beer together. Just bought our first house in the middle of the woods in Arkansas 10 acres got us a tractor ain't got no head of cattle just built my metal shed and looked up stove videos to get ideas on what to do. Found this love it....

Hey how are you! Quick question, how did you attach the tin wall sheets to the metal studs. Did you pre drill a small hole then put in the screws? Thank you!

How are your gutters attached. It looks like i have the same building. Also did you make the snow stoppers out of on the roof

Awesome and informative video (never to long or informative) but the gasket landing on the roof at the 13:15 mark made me laugh pretty damn hard! Instead of that RTV sealant some RV roof seam EPDM calk or even caulk used for OTR trailers with aluminum roofs would be a much better and more durable choice.

Hey josh has this caused any condensation inside?

does that rubber get hot with a double wall insulated pipe?

Question. Is it more beneficial to cut the diameter of the flashing piece as oppose to cutting the diameter of the pipe or is it just preference?

Any issues with condensation on the interior tin when its cold?

looks like rain coming

What is the adaptor that you used to connect your stove pipe to the chimney? I cant seem to find one like that. they all seem to require a roof support box.

Love your video! Just started following your channel. I’d like to ask why did you go through the roof versus the wall? My wife and I just started making KZfaq videos (Off-Grid on Friday) to chronicle our journey on developing our property. I am hoping to have similar success with my project. Any info on why you went through the roof would be great. Thank you!

The last time a man looked at me like that and said he was goin to show me his gasket, cost me 50 bucks!

Nothing like having a wood stove in the shop. I put one in last fall just before it got cold, and it's been great. I got a rusty old Vogelzang box stove (not the smallest but the next size up), for practically free at a yard sale (I sold the other stuff I got as part of the deal). I used up 3 Horrible Freight cup brushes on it, painted her up, and replaced all of the hardware with brass. She's a beaut! I used one of those silicone boots, too, but I just used a regular rain cap, or hat, or whatever they are called. I think I'm related to that Mexican drug lord, but they call me El Cheapo, not El Chapo.

Nice job. Do the instructions for the rubber cap recommend cutting the hole in the ceiling that large?

Thaaaaank yoooou! Exactly what I've been searching for!!!! Can you tell me please, what exactly is that piece that connects your single wall pipe to the insulated?

Sharing it with wood and pellets stove company in latrobe pa USA

How much double wall pipe did you use in total?

hey! i wanted to ask you.. I'm thinking about doing this and nowhere local sells those boots. I have the same style building and with triple wall pipe if i just went trough the metal with a 1/4 inch gap and siliconed it with high temp silicone do you think it would be sufficient? that triple wall shouldn't get too hot and there's no insulation or wood. Just looking for ideas.

Great video! I have 2 quick questions though. At 5:00 you put the gasket over the adapter. Was that just for demonstration? Didn't you slip the adaptor over the insulated pipe later? Also, did you use double wall or triple wall pipe? Thanks again for doing this video and giving your advice!

hi. how are you finding the water getting free from the lip at 13:59? any issues 4 years on? thanks!

About to add a wood burner in my uninsulated shop as well. How well does the stove heat the space with no insulation?

Is the insulated pipe strictly to prevent discoloration? I have a workshop constructed very similar to yours except my sheeting runs vertically.

have you had any problems with the pipe boot condensating and dripping into the living area ?

What's a Sol Duc sweatshirt doing in N. Carolina?

Does the Tee pipe you added work well for cleanout?

At 4:55, you refer to the adapter. I cannot find that part. Do you have a link or a part number?

Farmer where did you purchase the rubber gasket?

Awesome thanks! How well does it heat in 30 degree weather? Does it bring the temperature up enough to work comfortably?

How is the wall where the heater doing since you installed

Love the hat lol

What adapter was used to connect the insulated pipe to the single wall? I need to connect Duravent single wall to a triple wall, but I cant find useful info. I'm using this video as my guide

The smoke pipe joints are backwards, the crimps should be in direction of air flow! Otherwise they leak co2! Proper mechanical connection! My 20 by 30 metal shop went up last week. Agricultural lol

Have you put insulation in the shop yet? Seems like that should have been the first step. What size shop is that? Im about to get one built and im having them do the 1/4 inch double bubble throughout.

Why no support inside the building up near the ceiling for the heavy double wall pipe? It would be a disaster if for any reason that thin black smoke pipe deteriorated and all that weight came crashing down inside the building!

Looks great.Good way to dry out bails of hemp.....lol.......Woooo