How To Install An Adjustable Fuel pressure regulator

Рет қаралды 135,815

klowny1969

Күн бұрын

Aeromotive 13130 AFPR fuel pressure installation video. In this video i show you in detail how to install an adjustable fuel pressure regulator. How to adjust a fuel pressure regulator. Where to mount a fuel pressure regulator. How to mount it. How to plumb a fuel pressure regulator. This vehicle was a camaro but the regulator is universal. AEM Turbosmart
check out my channel for more videos:
How to change a tire pressure sensor (TPMS) yourself:
www.youtube.com/watch?v=PDpDm...
Dakota digital dash Install (1982-1992 Camaro)
• Dakota Digital Dash In...
How to install a 4L60E transmission:
• How To Convert a Stick...
How to Wire A Switched fuse block:
• How To Wire A SWITCHED...
Complete Brake Overhaul:
www.youtube.com/watch?v=TVA0t...
Vintage air serpentine setup:
www.youtube.com/watch?v=ByVdD...
How to Upgrade your fuel pump:
www.youtube.com/watch?v=8-7sB...
How to install an electric vacuum pump:
www.youtube.com/watch?v=i1n3b...
How to build a camaro from top to bottom:
www.youtube.com/watch?v=5twT_...
400 Cubic inch small block Dyno testing:
www.youtube.com/watch?v=eavm4...
How to Clock an Alternator:
www.youtube.com/watch?v=_I24m...
How to Replace a u-joint:
www.youtube.com/watch?v=QQsXs...
How To install a trans pan drain bolt:
www.youtube.com/watch?v=zXFCB...
How to install subframe connectors:
www.youtube.com/watch?v=9n1Yc...
How to do a quick wheel alignment (toe in toe out):
www.youtube.com/watch?v=Ycdoo...
klowny1969 - best car mechanic on youtube
Only clown mechanic in the world ! Uses for an air hammer
This video can be applied to chevy, ford, mustang , impala , camaro , corvette, truck , toyota, lexus , honda , nissan. etc.. volvo cadillac gmc astrovan truck blazer silverado turbocoupe thunderbird clown clowny69 klowny69 GMC Savana 2500 Siera 1500 Sonoma isuzu hombre GMC

Пікірлер: 72

@giuseppeverdi1253 3 жыл бұрын

Missed ya, Klowny. Keep those videos coming!

@klowny1969 3 жыл бұрын

Hey man..happy holidays! i will be gearing up for some great videos in 2021..stay tuned :)

@terrancejones6652 3 жыл бұрын

I appreciate all the help

@klowny1969 3 жыл бұрын

Thank you..don't forget to subscribe!

@johnmilner7603 3 жыл бұрын

Always looking forward to a new video. Merry Xmas.

@klowny1969 3 жыл бұрын

Thanks man! Merry Xmas to you as well!

@Phillifully Жыл бұрын

Thank you. That’s what I surch for. Greetings from Germany 🇩🇪

@klowny1969 Жыл бұрын

Thanks and don't forget to subscribe

@jaysilver4670 Жыл бұрын

gotta hook up the same pressure regulator today. good tips in here. Thanks for posting

@klowny1969 Жыл бұрын

Thanks for watching and don't forget to subscribe

@RedLeoLion 4 ай бұрын

If it has 2 inlets does it matter which side to use.?

@randyluvan9623 3 жыл бұрын

This is a great tutorial! Thanks

@klowny1969 3 жыл бұрын

Thanks for watching and don't forget to subscribe!

@adamfurlong4032 2 жыл бұрын

What do you do with the factory fuel pressure regulator on the fuel rail?

@trippynyc Жыл бұрын

Thank you this was just the information I needed 💪🏾💪🏾💪🏾

@klowny1969 Жыл бұрын

Awesome! Don't forget to subscribe!

@trippynyc Жыл бұрын

@@klowny1969 got you

@turbo79civicbf 3 жыл бұрын

Clean and straight to it 👏🏼👏🏼 but Man get rid of that Russell filter get a aeromotive one ,Russell gets dirty way to quick trust me

@juiced71 3 жыл бұрын

Merry Christmas !

@klowny1969 3 жыл бұрын

Thanks man..You too!!

@125sm3 3 жыл бұрын

It's been a while Klowny, have a great Christmas.

@klowny1969 3 жыл бұрын

Thank you..you too!!

@davemmustang5038 3 жыл бұрын

Thanks - great video -I purchased the Aeromotive 13205 and it didn't come with any fittings?

@saulwulf 2 жыл бұрын

Will this work for a 92 Chevy RS 5.0 tbi to carb swap?

@djack2058 3 жыл бұрын

Man I need your help. So you see how you have that black cap/fitting in one of the holes on the fuel pressure regulator? Well, where your regular has that gold ring for your gauge, my has another hole that would fit another black cap. So my question is, what size gauge would fit on my regulator? Again, my regulator hole is the same size as the hole you screw your black cap in. I've ordered 2 different gauges, didnt fit. Asked the person I bought it from and they said a 1/4" size, but that's too big. But not to mention, my 6an lines and that black cap fits in the same spot

@wolfdaddy2841 3 жыл бұрын

I enjoy your videos , they take me back to the days of hanging out with my brother , thank you for that , but I have to ask , I can't place your accent , is that Alabama or maybe southern Georgia ? 😈😂😇

@klowny1969 3 жыл бұрын

Thanks for watching and commenting..glad I can bring back those memories..I'm from new york

@youngmoe8452 2 жыл бұрын

what Carburetor you are using?

@Mitutumuch 3 жыл бұрын

hey man quick question, how come you capped off the one side? you said you were going to out a fpr on the inlet and the outlet?

@winstonjohnson155 Жыл бұрын

Feed line only no return

@jcamp2112 2 жыл бұрын

Hey I noticed the fuel pressure is only 40 PSI, and on a holley sniper it's supposed to be 58-60 psi. I bet you have a lot of issues with that sniper having such low fuel pressure.

@kk-bo8ey 3 жыл бұрын

Nice video as usual. Why are you switching to Atomic?

@klowny1969 3 жыл бұрын

Thank you..customer had an extra atomic laying around that he preferred to have on his car..happy holidays!

@kk-bo8ey 3 жыл бұрын

@@klowny1969 Same to you and Brianna

@sebieusebeuse4838 3 жыл бұрын

So Nice 💘💘💘💘💘💘

@klowny1969 3 жыл бұрын

Thank you

@philsigman9088 3 жыл бұрын

Just curious, why are you swapping out the Sniper?

@klowny1969 3 жыл бұрын

Customer had it laying around and liked it better..thanks for watching

@chevytruckjerry 2 жыл бұрын

*Spreads assembly lines with fingers on threads, wipes fingers an pants. I definitely share a common bond here 😆

@klowny1969 2 жыл бұрын

Yeah baby..don't forget to subscribe

@hankpb1 3 жыл бұрын

hi is it fitted before or after the fuel pump?

@klowny1969 3 жыл бұрын

always after..dont forget to subscribe

@stevereitnauer8406 2 жыл бұрын

So, those are AN hoses? Are they ptfe lined? If so what’s the difference between this hose and the hose that uses the ferrules?

@Diabloshell Жыл бұрын

They're braided lines, the an is the fittings

@rafaelrivera4505 2 жыл бұрын

Hello. I am Rafael, i want to know if you elimínated the original regulator to install the other, or do i install the way you did it.

@tgray5327 3 жыл бұрын

OK.. sorry but I must be missing something.. you've got the bottom return line back to the fuel tank, right side of Regulator feed out going to the throttle body... where is your supply feed into Regulator from the fuel pump?? I mean correct me if I am wrong but that's the point of the fuel pressure regulator is it not?...going from a high pressure fuel pump, regulating fuel pressure into a carburetor,throttle body, fuel injector rail..

@rogjackson 2 жыл бұрын

I was wondering about that too. Also, he says at 10:55 that he's not using the regulator to regulate the fuel pressure because the Sniper unit does that in this particular instance. Then why have a regulator at all? Maybe just for the return line fitting out which goes back to tank? If that is the case, then I wonder does the Sniper regulate fuel pressure without providing it's own return line out?

@Diabloshell Жыл бұрын

Same, soo confused.

@HoffshawsFrankenstang-ne8io 5 ай бұрын

Same, I do not understand why the return line is being regulated (?). Trying to maintain back pressure?

@sanjim89 Ай бұрын

Did anyone ever figure this out ? I was wondering the same thing.

@lenloe5390 Ай бұрын

@tgray5327 @rogjackson the pressure reg is on the return because it has a return. With no regulator, there is free flow through the return wich causes no pressure but lots of flow. So when a regulator is added, it is not regulatimg the fuel to reduce pressure as you might think, it is to add pressure. It being on the return allows you to close the valve in it a little bit, restricting flow, and adding pressure to the parts that need it. Any questions?

@donlovelace2127 2 жыл бұрын

So it looks like you are still using the internal regulator. Why ?

@vandettabuilds6641 2 жыл бұрын

Fucken sweet man!!! Where did you get it?

@klowny1969 2 жыл бұрын

thanks man..from summit i think..i dont remember

@jess6972 3 жыл бұрын

What engine?

@klowny1969 3 жыл бұрын

vortec

@aqib2000 3 жыл бұрын

Could have just fitted a t piece and called it a day

@klowny1969 3 жыл бұрын

sorry i'm not sure what you are talking about?

@itsnodawayitustabe5654 3 жыл бұрын

Thirdgen King

@klowny1969 3 жыл бұрын

Thank you sir..happy holidays

@rafaelandrade134 2 жыл бұрын

isnt it before the carb.?

@klowny1969 2 жыл бұрын

This is fuel injection..don't forget to subscribe

@rafaelandrade134 2 жыл бұрын

Ahhh, makes sense.! Really nice setup you have.!

@malcolmmok08 3 жыл бұрын

No ac or heater core in that engine bay. Oh boy

@klowny1969 3 жыл бұрын

I actually have a video on installing a vintage air ac system on this car oil thanks for watching

@SupraJoel 3 жыл бұрын

Nice vid, except It's called petrol and fuel, not gas. :P Gas is an aerosol, not a liquid.

@klowny1969 3 жыл бұрын

Lol

@jamesortega8681 5 ай бұрын

i dont get it, u said the bottom hose sends gas back to the tank, while the side hose is an inlet so it accepts the fuel from the rail so that could only mean the regulator controls the pressure going back to the tank , not the pressure going to the rail

@emozburnes1733 5 ай бұрын

No false the inside of the regulator or different than basic dead head regulator so yes you receive fuel from side and return on bottom but opposite on dead head regulators