How to Install an Exhaust Fan in a Basement Bathroom (DIY Exhaust Fan Installation Step-by-Step)

Рет қаралды 19,477

6 ай бұрын

Check out my FREE "How to Add a Bathroom to a Basement" Ebook (w/ Cost Breakdown) ⬇️
proud-tiger-97948.myflodesk.c...
Learn how to Install an exhaust fan in a basement bathroom with this video!
Tools and Materials 🛠🧰 needed to install an basement bathroom exhaust fan: amzn.to/3Rhb8cT
In this video, I will show you how to install an exhaust fan in a basement bathroom, step-by-step. Specifically, you will learn:
1. How to core drill a penetration through your home's cinderblock foundation for the exhaust fan discharge.
2. How to install the exhaust fan hood on the exterior of your home.
3. How to install the exhaust fan in the basement bathroom ceiling.
4. How to hook up the exhaust fan ducting to the exhaust fan.
5. How to install a drop ceiling around the exhaust fan.
Once you finish watching this video, you will know exactly how to install an exhaust fan in a bathroom.
This is Episode 9 in my "How to add a basement bathroom" series where I am going to show you how to add a bathroom to your basement, step-by-step. Below are the Previous Videos in the series:
Episode 1: Basement Bathroom Planning, Permitting, and Below Slab Plumbing: • How to ADD a Basement ...
Episode 2: How to Build Basement Bathroom Walls:
• How to Build Basement ...
Episode 3: How to level an uneven basement floor
• Self Leveling Concrete...
Episode 4: How to Install LVP in a Basement Bathroom:
• How to Install Vinyl P...
Episode 5: How to Build a Modern Barn Door: • Modern Barn Door Build...
Episode 6: How to Install a LED Bathroom Mirror: • LED Bathroom Mirror (...
Episode 7: How to Install a Basement Bathroom Toilet: • DIY Basement Bathroom ...
Episode 8: How to Install a Drop Ceiling in a Basement:
• How to Install a Drop ...
In the next few videos, you will learn how to:
- Install Basement Bathroom Drywall
- Install a Basement Bathroom Vanity
- Much, much more!
Be sure to subscribe and hit the notification bell so you don't miss any future videos that are part of the Basement Bathroom Renovation Series!
This "How to add a Basement Bathroom" video was preceded by my "How to finish a basement series". For more information and videos on my entire basement remodel, Check out the videos below!
Time Lapse of the Entire Basement Renovation:
• Incredible DIY Basemen...
How to Remodel Basement Stairs:
• DIY Stair Remodel on a...
How to Install Rigid Foam Insulation
• How to Install Rigid F...
How to Frame Basement Walls
• DIY Basement Wall Fram...
How to run electrical in a basement
• Tips for Adding Electr...
How to Replace and Trim Out Basement Windows
• How to Replace and Tri...
How to Drywall a Basement
• Basement Drywall Tips ...
How to Install LVP Flooring in a Basement
• LVP Flooring Installat...
How to Install a Drop Ceiling in a Basement
• A Drop Ceiling that Lo...
▬▬▬▬▬▬▬▬▬▬▬▬▬
Follow me on Instagram: / atimprovements
Check out my Blog: Atimprovements.com
Subscribe to my KZfaq Channel ⬇️ kzfaq.info...
Check out my Website for additional DIY Content: atimprovements.com
▬▬▬▬▬▬▬▬▬▬▬▬▬
Thank you so much for watching!
*All content on the Andrew Thron Improvements KZfaq channel reflects my own opinions. Please seek out guidance of professionally trained and licensed individuals before making any decisions. Links in the description may be affiliate links.

Пікірлер: 28

@zeeshaniqbal5518 2 күн бұрын

Hey, very nice and clean procedure you have followed Andrew. Have you installed an ON/OFF switch in the room for ease and accessibillity.

@kirilkirov6036 4 ай бұрын

As a HVAC engineer as you Americans say or heating and ventilation engineer / duct fitter (known in UK). I see few things wrong (not hate). First the flexible ducting cannot be longer than 70-80 centimeters , also you have to hold the flex with a hose clamp / jubilee clips and then aluminum tape. Also minimize the 90 degree bends to the minimum if you can. That's pretty much it I believe. Other than that great job and good video !

@cadayx 6 ай бұрын

Another great video Andrew! I would suggest using some stainless steel hose clamps in addition to the aluminum tape for connections.

@AndrewThronImprovements 6 ай бұрын

Appreciate! I totally agree - I may just go back and add some since I completely forgot during the install. I think the tape will probably be fine, but having that extra security never hurts.

@mikelallo4004 6 ай бұрын

Love your videos great information

@AndrewThronImprovements 6 ай бұрын

I appreciate it! Thanks for the support 👍

@gillgetter3004 6 ай бұрын

Looking good👍installed one years ago in basement. Used rigid pipe though, I’d use the flexible if I did it again, back in those days the flexi was crummy vinyl, I think that foil one is way better.

@AndrewThronImprovements 6 ай бұрын

Good stuff! Yea I think rigid is objectively a better bet - but the ease of flexible is hard to beat. Thanks for watching!

@limpfinger12 6 ай бұрын

Is there anything code wise about the vent being so close to the ground?

@LanaFauxFauna 6 ай бұрын

I love your videos!

@AndrewThronImprovements 4 ай бұрын

Thanks Lana! Appreciate it

@ppomm 6 ай бұрын

Looks good Andrew! I've never had such a big bit for masonry, so I drill a bunch of 1/2" holes in a circle then bust out the middle. You did a neater job! I think flex is fine for bath fan .. it just blows out humid air. Dryer vents have the whole lint accumulation issue so I think worth the extra effort to install rigid there. Thanks for sharing your work!

@AndrewThronImprovements 6 ай бұрын

That works too! And probably saves you 50 bucks on a bit you will never use again lol. I totally agree - I think I’m in good shape for a lightly used bathroom exhaust fan 👍

@leislymejia2864 2 ай бұрын

What about the exterior hood location, Does it matter where the air blows?

@rakeshshah3658 6 ай бұрын

Hey man I love you videos I always wait for your next video to upload this time do a basement gaming room

@AndrewThronImprovements 4 ай бұрын

I appreciate it! No plans for a gaming room at this house but maybe on the next one 👍

@jamesandrew4859 4 ай бұрын

Andrew, it looks like you have a rather long run of ductwork (maybe 8-10 feet?). Was wondering how well it is venting.

@dryerventcleaningde 6 ай бұрын

Pretty confident you're not supposed to use the hammer function on this diamond tipped bore saw. Drill setting only.

@AndrewThronImprovements 6 ай бұрын

Idk… I’ve always had an easier time drilling through CMU or concrete using the hammer function 🤷🏼‍♂️

@jealousmuch888 6 ай бұрын

How am I first, lol 😂❤ great video

@AndrewThronImprovements 6 ай бұрын

Haha I appreciate it! Thanks for the support 👍🙏

@jealousmuch888 6 ай бұрын

@@AndrewThronImprovements for sure ☺️

@gamessnacksb2b561 3 ай бұрын

Empty cavities in basement 😅 I never find those usually that high up its a bond beam with rebar and most foundations especially now are completely filled, drill a small hole to confirm it isn't and you don't need to use hammer function while drilling and definitely not when starting hole, experience: doing this 5-80 times a week as a concrete cutter

@elvaaz1000 6 ай бұрын

Great Job EXCEPT the bird or ...... can built nest out side of pipe. Need to add accessory that close the vent out side when it is not in use and will be open when the vent blow out . Other than that it is Pro Job 😉😉😉😉.

@AndrewThronImprovements 6 ай бұрын

Haha I hear ya! But there is a bird screen that goes on the outside so hopefully I am covered 🤞 thanks for watching!

@sflowers99gmail 6 ай бұрын

I'd be careful, some fans specifically say avoid flexible hose (e.g. Panasonic). Looks like a dryer exhaust kit btw.

@AndrewThronImprovements 6 ай бұрын

I totally agree that rigid duct is the better way to go! I didn’t see any warnings on the fan about only using hard duct so I’m hoping everything will be ok since it’s only an exhaust fan for a lightly used bathroom. Thanks for watching!

@WoodUCreate 6 ай бұрын

@@AndrewThronImprovements Flex pipe is fine for bathroom exhaust. There are often code requirements for dryer ducting. Typically in my area, the pipe must be rigid except the last bit of length to the dryer can be flexible.