DIY LED Light Bar Harness - How-To Make Your Own

Рет қаралды 392,341

9 жыл бұрын

In this video I'll show you how to make and wire your own relay wiring harness for your LED light bar or any other accessory. In the end we'll have a harness that will include a single relay, a fuse, and a switch, and will power your Light Bars or accessories with the push of a button.
Check out Quadratec and their stuff Here: bit.ly/1EMfJo8
More Detail on how-to install your wiring harness: • How-To Wire Offroad Li...
How-To Solder: • How-To Solder
Build your own relay and fuse box for up to 7 accessories: • BleepinJeep's DIY: Re...
A good Wiring Diagram from SirGCal and found on the JeepForum Website: www.jeepforum.com/forum/f20/wi...
And a Handy Wire Gauge Chart: www.offroaders.com/tech/12-vol...
Website: www.bleepinjeep.com
FaceBook: / bleepinjeep
This product is meant for entertainment purposes only. Your mileage may vary. Do not try this at home. Void where prohibited. Some assembly required. For off-road use only. Slippery when wet. Batteries not included. Do not use while operating a motor vehicle, heavy equipment, cherokee XJ, wrangler TJ, wrangler JK, or any Jeep vehicle, especially the newer Fiat ones. How-to videos may be too intense for some viewers and children under 30 years of age. Please remain seated until the 4x4 ride has come to a complete stop. Studies have shown viewing these videos causes increased cancer risks in laboratory test people. I am not a professional, I have no training, I'm not even particularly good at horse whispering. Don't believe everything that you know. Please keep your hands in the vehicle at all times. Do not tap on glass. Do not eat anything that has been on the floor for more than 3 days. Keep your hands to yourself. Not to be taken internally. Reproduction strictly prohibited. Driver does not carry cash. Objects in Bleepinjeep mirrors may be farther than they appear.

Пікірлер: 325

@bunmi5125 Жыл бұрын

Dear Bleepin Jeep, I am NO reading or writing English well, just understand your speaking about 35%, but I able to follow your drawing picture and wiring the spot lights to my 2016 Toyota Hilux and it's working perfect. You are a God sent. Many many Thank you from Vietnam to you Sir and God bless you and your family.

@danielbonner8309 6 ай бұрын

Broooo. Watch about 10 videos trying to figure out how to wire my prebought harness to not have constant power. This is the one that made it click. Youre the MAN!!

@DarnellHannah 9 жыл бұрын

I'm very thankful that you took time out to explain this whole process in this video. You are a God sent, this was a perfect video. You taught with patience, slow speech, and proper english and even had visual demonstrations. EXCELLENT

@RealStraightTruthBroadcast 6 жыл бұрын

i agree

@RealStraightTruthBroadcast 6 жыл бұрын

Thank you for helping many people, you just taught me a huge lesson in wiring light in 20 minutes. thank you for your patience .

@oscarsanchez6233 6 жыл бұрын

I followed your directions step by step for my 2003 honda civic si. The fog lights work like a charm and I didn't have to pay an arm and a leg for a shop to do it. Thanks brotha!!!

@11E9 8 жыл бұрын

Thanks for putting this together! I just used this diagram and instructions to create my own wiring harness. It wasn't any cheaper than buying one premade for me because I didn't have any of the wiring or parts on hand, but if I ever need to make another, which I will, I have everything I need! Thanks again!

@vity44 7 жыл бұрын

Very educatioal, easy to understand, the best so far Ihave seen, you shoul be a teacher. Thank you.

@aaronkarch181 6 жыл бұрын

You are a extremely comprehensible teacher , visual aide is a big plus ! thank you for taking the time to make this video, truly appreciated. I am wiring a 20 inch cree bar to my 2016 argo , this will be most helpful . cheers man !

@ezmoney82 6 жыл бұрын

I like how this guy always explains stuff thoroughly and doesn’t bullshit. Keep it up brother

@928PvAz 3 жыл бұрын

Im so so sooooooo thankful for this video. It was well detailed in just wired my very own first led pods on my 2013 F150. Because of this video, i saved money by wiring my own Led Pods. I was so scared to mess around with the cars electric, but i did, and i was sooo happy!!!!

@salmanfarooq1354 15 күн бұрын

wow....what a tutorial. I love it. Great demonstration with short wires and connections.

@nuggetzor 3 жыл бұрын

This is by far the best for dummies explanation I have ever watched for lighting harnesses and the logic behind them. Thank you so much

@jaredlucas8012 6 жыл бұрын

Best explanation ever! Thanks for taking the time to do this video!

@dee3368 5 жыл бұрын

You made this easy. And got right to the point.I've watched several videos on here on how to wire up these.people just ramble on about things that have nothing to do with wiring or do not show the whole process.great video thank u

@KoffoMotors 5 жыл бұрын

This video was very helpful today. I have just been able to wire my LED off road lights to my Tundra without buying anything. Thanks for the great video. Kudos to you.

@shanestewart2955 7 жыл бұрын

thanks for all the "details!" totally helped me install my led lights on my rubicon!

@roberthayes5249 8 жыл бұрын

thanks for a great, informative and easy to follow video. This is the best on youtube for those of us that are not experienced 'auto electricians'. I will also refer friends to this when the need arises. I'll definately be following it word for word when I fit a light bar and other lights to my '97 TJ. Regards. Bob-Skegness, UK

@kenadair585 8 жыл бұрын

finally a video that helps me!!! great job man, very helpful!

@kingkrapper108 6 жыл бұрын

Thank you for your help I finally got my lights working after billions of videos yours worked

@Miikecash27 5 жыл бұрын

Thank you so much for this video imma just start making my own wire harness now thanks good video

@lllamaaa9315 4 жыл бұрын

This 100% worked, easy to do if you follow along! No wiring harness would work on my car and doing this made it work! Thank you for the help

@bleepinjeep 4 жыл бұрын

Ya no problem

@bowmaster24 7 жыл бұрын

You saved me. Couldn't find the color diagram for my light bar and I've made peace with the fact that I need to just make a another harness. You da man!

@Strider-bc2iq 6 жыл бұрын

One of the most useful videos ive ever watched on youtube

@emfl4437 3 жыл бұрын

Excellent video, exactly what I needed to guide me through wiring leds

@alexwen2786 8 жыл бұрын

Thank you for explaining everything in simple terms.

@dewabj3941 8 жыл бұрын

Thank you for your tutorial.. Very helpful!

@Gianfranco_Estremadoyro 9 жыл бұрын

Great video! very well explained and very detailed, easy to understand and use! thank you!

@3olemrac 6 жыл бұрын

Thank you so much for your video, I feel more confident now to experiment in my old truck!

@greym6436 6 жыл бұрын

Thank Sir for sharing this tech wiring info with us. This has been something, that I have always wanted to learn! Im only comfortable with the R/C hobby car world wiring. Once again, thanks for the info bro.🤘

@ExploreWithSandeepG 4 жыл бұрын

Brilliant , super informative and superb way of delivering technical content ... !!! Thanks a lot.

@billsmith147 5 жыл бұрын

Thanks for the great video. I have been looking for this video for 6 weeks.

@ronschwab75 2 жыл бұрын

Finally a great video on how to make your own wiring harness THANK YOU!!!

@shawnmo2204 4 жыл бұрын

Thank you very much. You’ve made this look like child’s play. Your explanation was perfect and easy to follow along. Liked & subscribed

@c230benzito 7 жыл бұрын

Another great helpful video. Thank you!

@katanaburner 8 жыл бұрын

Very VERY well done. Thanks for the explanation. Very well done :) Thank you!

@ty6896 Жыл бұрын

Hey! Best tutorial about how to wire a switch to a relay! Thank you so much! I was a little stumped when it came to wiring an LED switch to a relay.

@cwaddy878 6 жыл бұрын

Excellent explanation, thank you. You made it click for me.

@92GQ 9 жыл бұрын

Nice work. Simple explanation and drawings. Glad I came across your page.

@LONESTARBILT 4 жыл бұрын

Thanks for the great tutorial! Lots of useful Information for someone like me who's never hood up lights!

@TrumanSparx Жыл бұрын

Great video! All of the information I was looking for was here. Well done!

@qualityreno9689 3 жыл бұрын

best tutorial on the subject on youtube. thank you for posting this.

@JohnDoe-lm3oj 2 жыл бұрын

Thank you for taking the time to make this video. You're an mvp

@paxtonwirtz 8 жыл бұрын

Most helpful way to understand replays and a 101 for any wiring thank you

@hwajeongkid25 5 жыл бұрын

I see a light at the roof of my SUV! This video works great! Time well spent thanks a lot

@moesislek4902 9 жыл бұрын

Thank you very much. The pre-owner of my xj jamboree installed it like your cheap way. Now i can install it the good way. Greets from austria

@bleepinjeep 9 жыл бұрын

Moe Sislek Danke

@OHIOVALLEYFIREARMSANDBAIT 4 жыл бұрын

Thank you for a great video. Easy to understand. Thank you!

@cameronishype7384 8 жыл бұрын

Well done. Definitely saving me money from buying $20 harnesses and having to wait in the mail! Haha. I appreciate it man. Definitely helped.

@rastagamer4808 7 жыл бұрын

Excellent job in explaining everything!!!!

@dynaJoe2002 9 жыл бұрын

I want to thank you with your explanation and diagram It gave me the confidence to wire my our lights...Thank you thank you thank you....

@msark1741 4 жыл бұрын

Thank you. Great length of information. Keep it up.

@jamesgriffin519 8 жыл бұрын

great explanation! thanks for the info

@Sunshine0955 7 жыл бұрын

Slowly is key! Well done sir, I totally understand now!

@farivera2815 5 жыл бұрын

Very good explanation, thanks.

@asianredneck6259 8 жыл бұрын

Best video I've found on KZfaq on how to wire a relay, also took your time to let us screenshot the diagram

@asianredneck6259 8 жыл бұрын

+BleepinJeep haha your welcome, and I do watch a lot of videos from you, even thou I have a wrangler, your Cherokee is close to everything in my wrangler

@nomadic8577 8 жыл бұрын

I love your video bro, you the man!

@justinharris2646 6 жыл бұрын

Very informative! Thanks!

@kopyit7033 8 жыл бұрын

well done mate! pretty much better and cheaper. you are good instructor.

@EdgeofEternityBillCameron 3 жыл бұрын

Great instructions. Thank you.

@mohammadkhan-gl2yw Жыл бұрын

Nice one Thanks very easyto understand.

@koraykaranfilci142 5 ай бұрын

The best and the simplest explanation ! Thanks

@gevorgnazaryan8720 4 жыл бұрын

Exactly the video I have been looking for

@joshhead9368 3 жыл бұрын

Awesome video man thanks a lot

@guilhermebarbosa3785 4 жыл бұрын

Thank you that salved my installation very well done

@rickeybones7952 8 жыл бұрын

i just used this wiring diagram you made to wire up my led light on my atv .. I just wanted to let you know that you made a perfect video 2 thumbs up

@bleepinjeep 8 жыл бұрын

Awesome thanks!

@SinjinCerasani 8 жыл бұрын

Big big help, thanks so much!

@joemurray1279 8 жыл бұрын

Sick! so neat and organized i like it. thanks for the video now i can wire up my 2 12inch light bars the right way and not the hack way!

@taterrj91 7 жыл бұрын

fantastic job on that video that was great thank you

@SuperScareface007 3 жыл бұрын

Excellent video

@ferdieveloso7937 7 жыл бұрын

nice and easy to follow... thanks for the video...

@ethandevitt5003 3 жыл бұрын

Thank you for the video helped me out. I subscribed

@jrobinson3483 5 жыл бұрын

Great video! Thanks!!

@osvaldoalarcon1813 7 жыл бұрын

really helpful thanks man! and bad ass jeep!!

@Finesse79 3 жыл бұрын

Nicely explained. Thank you!

@trials_bike-xu3xf 6 жыл бұрын

This is exactly what I needed thank you for such a great demonstration. Cuz I got a used light bar and it has the in line fuse but no relay or switch and not nearly enough wire. I already have a spare relay and plenty of spare wire. All I need to buy is the mounting brackets and the switch. I just am not the best with wiring yet so this video will help a lot!!!

@bleepinjeep 6 жыл бұрын

no problem, thanks for subbing!

@saldav420 2 жыл бұрын

Great video bro thanks

@pete9b 5 жыл бұрын

Great, informative video, thanks!!....

@emzye4641 Жыл бұрын

Excellent tutorial 👊 best one out there by far. Thanks will be attempting this very soon

@bleepinjeep Жыл бұрын

Have fun!

@mattdovi2255 8 жыл бұрын

this guy is great, out of the 5 questions I had pertaining to my jeep (JK, but similarities amount many jeeps) 4 of them were answered so well I was able to do it myself. This most recent one here (wire harness) was great because my LED bar came with two fog lights as well and the wiring harness but the wing harness was cheap and i wanted to run the two fog lights and LED bar separately. Went to Advanced Auto and for $30 bought 3 packs of 14 gauge cable, connects, two fuses and relays and 30 amp fuses and was able to make the wiring harness go where I WANTED it to go as well as hook it up to the rockers I had bought.

@walterk1221 8 жыл бұрын

Don't exceed seven feet wire length using AWG #14 in a circuit fused at 30 Amps.

@mattdovi2255 8 жыл бұрын

+Walter K I've been doing it no problem. What would be the issue?

@gabegarcia1199 7 жыл бұрын

thank you for the drawing. It helped me

@luisacosta2280 5 жыл бұрын

Bleepin Jeep is that Guy. There are so many DIY self Led light videos, why would anyone feel it necessary to make another video of a preassembled factory harness??? This guy on the other hand breaks it down to the nuts and bolts, another True DIY self video on a DIY self harnes. Friggin awesome Video Man !!!

@qualcont2 7 жыл бұрын

Really appreciate the video!!!

@paulwilliams2849 7 жыл бұрын

Great stuff. Thanks

@chrisarmstrong5038 8 жыл бұрын

Your videos are so good...

@mahfuzul2015 5 ай бұрын

Perfect 👍🏻 i like it 💯

@mikebadaa1597 6 жыл бұрын

Great video thanks

@joseramirez-ez2oh 4 жыл бұрын

thank you so much eres el mejor

@chosenone5659 6 жыл бұрын

Thank you for this

@sheeshalready 9 жыл бұрын

Nice job, thanks!

@WestWire 8 жыл бұрын

Great video I just got a 22 inch light bar for my truck and have a wiring harness from fog lights I never installed found a 40amp relay from a stereo wiring kit I removed from a car I traded in and with the switch from the fog light wiring kit is a 15 amp fuse which I now know thanks to this video how to properly and safely put together. Thanks

@mengtselai3818 4 жыл бұрын

pretty useful,cheers

@nike1337ib 7 жыл бұрын

great video

@kcsaude 7 жыл бұрын

Thanks for the video.

@MartialArtsTutorialsFighttips 8 жыл бұрын

thank you very good video

@KarpucMotoring 3 жыл бұрын

Finally easily explained!!!

@theregularguy5409 4 жыл бұрын

it's crazy how informative this video is, thank you so much, now i know how to wire lights. Additionally, would the wiring be the same if i'm installing an on board compressor, or a CB radio?

@loganandmatt11 9 жыл бұрын

I thought it was a great video! I used it to hook up my 20 inch light bar on a ford ranger. Allthough on the relay I had to put the wire going to the fuze in the 87a spot instead of the 30 spot then it worked great! Now all my buddies want me to hook up their lights like this!