How to Install Dual Brake Calipers

Рет қаралды 7,345,310

Күн бұрын

Brake Calipers. Learn how to install dual brake caliper brackets and dual brake calipers as well as replace the differential fluid, replace the rear wheel bearing, and the replace the bearing seal on your car or truck. This process works on a live rear axle. I am prepping my drift car for this upcoming season by installing a dual rear brake caliper setup so I can use a hydro ebrake.
How to Install a Hydro Ebrake: • How to Install a Hydro...
How to Properly use RTV: • How to use RTV and pro...
How to Flush and Bleed Your Brakes: • How to do a Complete B...
Again, thanks Advance Auto Parts for providing Carquest Wearever Brake Parts for the rear of the DriftStang:
Calipers: advanceautoparts.rt8x.net/O7gVr
Brake Pads: advanceautoparts.rt8x.net/2ZEba
Rotors (2008 and newer models are painted): advanceautoparts.rt8x.net/3gn6k
→ Become a ChrisFix Subscriber: kzfaq.info_c...
→ Instagram: / chrisfixit
→ Facebook: / chrisfix8
→ Website: www.ChrisFixed.com
→ My Channel Home Page: / chrisfix
*If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Week*
Disclaimer:
Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. This video was supported by Advance Auto Parts and all opinions are truthfully my own. I already shop there and use their brakes on my cars so it was a perfect fit! ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Пікірлер: 5 900

@Joey-rr7cl 7 жыл бұрын

This is why I turn my notification bell on for your channel. I know you put a ton of work into your videos but wow dude, I am not sure who else saw how clean the suspension looked, all the painted parts, the calipers, etc... You go way above and beyond and that is why I love this channel! Your attention to detail is exceptional.

@chrisfix 7 жыл бұрын

I pinned my own comment but changed my mind when I read this! Thanks Joey! That really means a lot!

@Joey-rr7cl 7 жыл бұрын

No way! I cannot believe you pinned my comment. Thanks Chris.

@JonnyGuns 7 жыл бұрын

I second that, Joey!!

@matthewyoung917 7 жыл бұрын

Its amazing how you have all this knowledge. Were you a mechanic before youtube?

@bayumahardika1996 7 жыл бұрын

love from indonesia.. keep it up man

@eddie9591 7 жыл бұрын

I came out of curiosity to see what a dual caliper setup was, I left learning how to fix a rear axle seal that I really need to fix in my car. Great video as always.

@chrisfix 7 жыл бұрын

+Eduardo Serrato that's awesome! Glad the video was helpful!

@WarHawk427 6 жыл бұрын

It must be so funny watching you film, "Now we're gonna go from this..." *four hours later* "...to this*

@chrisfix 6 жыл бұрын

haha sometimes I wish it was only 4hrs

@Erafune 5 жыл бұрын

His voice has time to go through an entire puberty before "...to this". One day it's gonna be all old and raspy. xD

@mikuhatsunegoshujin 4 жыл бұрын

@@chrisfix Do a project that'll take you 20 to 30 years and make it happen.

@dawnmiller5872 3 жыл бұрын

@@chrisfix hi

@arhumtariq9455 3 жыл бұрын

Not really cause of editing he could say it and put the picture

@travishamiltontattoos4635 5 жыл бұрын

Anyone else thinking "I just learned about another part of my car that can go bad." It's a quite a miracle that any car stays on the road for over 6 months with all the parts that have to stay kosher.

@mikehuntsr.3414 4 жыл бұрын

To make your car 'kosher' cut off the best 20% of your car and throw it away.

@benhaggerty8707 7 жыл бұрын

I don't even own a car I just like watching this stuff

@chrisfix 7 жыл бұрын

Thanks! Glad you enjoy the videos!

@gtrlover3039 7 жыл бұрын

same

@affalterbachamg2094 7 жыл бұрын

ChrisFix Same but i help my dad im a 11 years old i was a mini mechanic i can replace oil,checking fuses cleaning air filters,replacing intakes

@dwaynsmith2151 6 жыл бұрын

Me too

@Stranger56474 6 жыл бұрын

I watch and I'm just a kid

@chrisfix 7 жыл бұрын

Thanks everyone and I hope you enjoyed the video!! You can find updates on my social media to see when videos will go live and what is up in ChrisFix land. Instagram→ instagram.com/chrisfixit Facebook→ facebook.com/chrisfix8

@nano7110 7 жыл бұрын

ChrisFix Beautiful 😉

@bluezombie3884 7 жыл бұрын

Ur awesome

@firdausfitter6211 7 жыл бұрын

ChrisFix Good I have my exams so just watch your videos

@maxtrice1786 7 жыл бұрын

what editing software do you use

@toetaggerusa6315 7 жыл бұрын

ChrisFix welcome back . I love your channel, very informative and very professional. Makes me wanna get a project car , I just bought a 2014 pursuit charger so Il build that up first 😂

@POW2000 2 жыл бұрын

I started out watching how to clean an engine....but this how to clip is insanely awesome...an average guy like me can get into the gear box...change the differential oils...change the bearings...even add dual brakes if I wanna...crazy!

@harunaljabbar96 5 жыл бұрын

Can i afford this? No Did i need this ? No Did i watch the entire video? Hell yes Hotel? Trivago

@haydenreyes4621 5 жыл бұрын

Lol

@reddplays2367 5 жыл бұрын

Harun ALJabbar I do have a car. Do need help but I still won’t do it myself 😂

@lildickanator 5 жыл бұрын

i wasnt expecting that lol

@alexpero9682 5 жыл бұрын

Harun ALJabbar lol

@jirkazeman7834 5 жыл бұрын

lol

@Trades46 7 жыл бұрын

I admit I never seen a dual caliber setup before. Most would simply go for a single fixed 2 piston upgrade, but a dual setup is new to me. Very informative.

@chrisfix 7 жыл бұрын

Glad you enjoyed the video!

@dachiiiii 7 жыл бұрын

who else watches his vids just because you r interested in cars and dont have car or dont need help?

@chrisfix 7 жыл бұрын

Thanks for the support! Hopefully you still learn a lot!

@furiousfighter5385 7 жыл бұрын

DACHI YT me!

@ghodkiller000 7 жыл бұрын

me too :), also i have learned new things ( sandpaper, polish and paint scratches video )

@Merobieboy 7 жыл бұрын

Me.

@bendraws8447 7 жыл бұрын

DACHI YT me so i can persuade my parents to let me :)

@yeahnah6468 4 жыл бұрын

Dual calipers are also a lot smarter than tapping into the existing rear caliper lines. You don't risk losing all your brakes if something goes wrong. Also in some countries it's just plain illegal to modify the existing braking system, so this standalone system gets around that which is awesome! Thanks for all the effort you put into your videos Chris!

@chestercheeto2228 3 жыл бұрын

I like how he diassembled his whole suspension to paint it for 5 seconds of footage, now THATS dedication

@anthonygonzalez5289 7 жыл бұрын

The level of detail and specifications that you give in each upload are well appreciated. I cant express enough how much your videos help me to fully understand the process and the correct way to attack an issue. Thx man 👍 couldnt do it without you.

@jgysewolf9345 7 жыл бұрын

ChrisFix add soapy wooter for extra brake power

@pyone5457 7 жыл бұрын

Your a LEGEND!

@saltrust1416 7 жыл бұрын

i like my soapy wooter

@jamestowncowfoe171 7 жыл бұрын

rofl

@saltrust1416 7 жыл бұрын

,,,

@itsvoodoo7050 7 жыл бұрын

It also ads some horse power I believe an extra 10

@pump-848 4 жыл бұрын

My Favorite Mechanics 1. ChrisFix 2. ChrisFix 3. ChrisFix Sorry I'm tired of typing ChrisFix but he is still the king .......

@gasperajdnik5627 4 жыл бұрын

My favourite mechanic 👨‍🔧 IS Miroslav kumljn.

@takuachemamalona5899 3 жыл бұрын

You said mechanics not mechanic

@mrhat1073 5 жыл бұрын

went into this thinking "I don't need dual calipers" to "so that's how you replace those bearings"

@davidallen132 4 жыл бұрын

right? been searching all over for a how to replace rear bearings on a rear wheel drive but couldnt find anything good. had no idea it would include messing with the differential or taking out the axle

@b.saulius3916 3 жыл бұрын

:DD y

@leochen4891 7 жыл бұрын

your tutorials are really high quality. great job!

@chrisfix 7 жыл бұрын

Thanks!

@kristinakaravajeva8879 6 жыл бұрын

Where is your capital letters on your comment??????????

@ThePeach_PieHQ 2 жыл бұрын

@@kristinakaravajeva8879 they left to get milk

@maoristereo 7 жыл бұрын

This has to be the best DIY car channel on youtube.

@chrisfix 7 жыл бұрын

Thanks a lot!

@BlackLocustPatriot 5 жыл бұрын

I definitely second that.

@youvids9820 5 жыл бұрын

Chris, you're really amazing, we appreciate your devotion

@Dauntless.steadfast.fortitude 4 жыл бұрын

Awesome, legit, you are by far the best teacher, instructor, videographer on car mechanics. Attention to details, clear & precise voice, no shakey camera, but most of all your humble & not conceited. Great work & honestly you should be teaching automotive repair classes. I think you would definitely succeed in everything you do. A master to most but a student to all.

@chrisfix 4 жыл бұрын

Thanks a lot!

@AbhishekChandra0606 7 жыл бұрын

I have many subscriptions. But out of all em. yours are the ones I only wait eagerly for. the amount of hard work you put in phenomenal. I pray for your success and may you reach unimaginable heights.

@chrisfix 7 жыл бұрын

Thanks a lot man! I really appreciate it!

@sultanmehmoodghaznavi6312 7 жыл бұрын

I dont have a RWD but now Im a mechanic. thanks to KZfaq. very informative!! no mechanic can fool me now.

@chrisfix 7 жыл бұрын

Glad the videos are helpful!

@teamdonotbotherme1285 7 жыл бұрын

ChrisFix I'm pretty sure you've made a few people mechanics!!

@ozomini3400 7 жыл бұрын

team do not bother me correction: alot

@ImUrOBGYN 7 жыл бұрын

That kinda thinking's gonna get ya fooled! ;)

@abud512 7 жыл бұрын

me too hahaha

@johnking3623 3 жыл бұрын

you are one of the few youtubers that explains exactly how to do it, step by step! I liked your video. these are the videos you always want to find when you need help! Thank you

@TheTferrer 3 жыл бұрын

Learned a lot by watching this video - great step-by-step process on how to install and service the rear differential and installation of new calipers. Thank you for sharing!

@robrond2864 7 жыл бұрын

I'm not even considering mounting dual brake calipers, and still I ended up here. Watching the entire video. Hypnotizing. :)

@chrisfix 7 жыл бұрын

I am glad you enjoyed the video!

@thedude7726 7 жыл бұрын

I just found your channel. I really like your clear, confident, professional speaking. you earned my sub, saying alto because I'm a Honda guy ;)

@chrisfix 7 жыл бұрын

Thanks a lot!

@LynnGryphon 5 жыл бұрын

It's amazing something so small holds your axles in. I have never heard of a C bracket before. I will hopefully never have to deal with something like this but it is cool as hell to see....

@luischevere7382 2 жыл бұрын

All I can say is EXCELLENT !!!Happy you included the dual brake part for those of us that just wanted dual calipers.

@mikester1472 6 жыл бұрын

10 minutes in and I’m completely dumbfounded by how amazingly well you cleaned the diff. Insane, great video man, will be doing something like this very soon

@luima23 6 жыл бұрын

The planification and edition of this video is flawless! Great work!

@MrAlexinferno 4 жыл бұрын

This is a very common solution! Thank you for such a detailed description. The key point is to find a faceplate for your car or draw it yourself and order production.

@drofaluap6521 4 жыл бұрын

As a kid that's about to get a new car I want to thank you for these videos. After I watch these videos I feel so confident and that I could fix whatever goes wrong. My moms van actually need new wheel bearings (if I remember correctly) and it was when everything needed maintenance on her van. So she had to pay way over $1,000 for all the stuff that had to be done. Now seeing this I feel like I could've done it for a less.

@fulltimekiller_1441 6 жыл бұрын

Wow! I have been watching your videos for a long time and just wanted to say good job man! I learn so much from you. Which helps me make more money. I love how professional, clean, and detailed you are. Also, its not easy to keep someone watching a video for 15 minutes and be interested the whole way through. Amazing job man! Thanks for the entertainment and information!

@Usmanthemecano 7 жыл бұрын

you were good in the beginning Chris but now you are simply the best at video production. I wish you delved into more intricate projects like engine building, manual trans repair etc. maybe get a cameraman for those big gigs. but it's nice to see how popular you've become in such a relatively short time. Hard work definitely pays off

@chrisfix 7 жыл бұрын

+affane78 thanks a lot! That really means a lot!

@chrisfix 7 жыл бұрын

+affane78 thanks a lot! That really means a lot!

@japjotgaming899 3 жыл бұрын

can we just thank Chris how he teached us and told every single step...Thank You Chris!!

@ICKY427 5 жыл бұрын

1:51 "all that using common hand tools" 5:53 "it does require a set of specialty tools"

@emilio7741 5 жыл бұрын

thats to replace the bearings :)

@ryanmyers5628 5 жыл бұрын

Its not for the thing that you came to watch

@szepikeeh 5 жыл бұрын

besides, he says, you can rent them for free at the local part stores

@AlexGreenwoodUkulele 5 жыл бұрын

@@szepikeeh That being said, that's fine if you're in 'murica. I know of nowhere that'll allow you to rent these tools affordably, let alone for free. Probably £40 to borrow the slide hammer for a day and £30 for the driver kit.

@Reploidx9 5 жыл бұрын

@@szepikeeh Not sure where the hell I'd rent them for FREE in the UK. Local part stores here sure as hell won't

@MyPandaRawrs 7 жыл бұрын

gotta wait for that 1080p ;)

@justinkleeberger5433 7 жыл бұрын

Finally people are starting to understand how KZfaq works! lol

@xFapcior 7 жыл бұрын

yes

@MrPyroBomb 7 жыл бұрын

MyPandaRawrs You know your damn early when its at 360p

@kavitapandit7786 7 жыл бұрын

MyPandaRawrs yup

@MyPandaRawrs 7 жыл бұрын

just casually spamming F5

@tristankeith5022 7 жыл бұрын

I don't own a car, I am 14. I don't drive or work on cars. Yet every time I see a new video I stop what I'm doing and start watching it till its done now matter what happens.

@ezrakainz 7 жыл бұрын

Tristan Keith same here

@AJFresh69 7 жыл бұрын

Tristan Keith never too early to start learning! this is actually the best time for you before you actually have a car in your hands with a problem you don't know how to fix

@chrisfix 7 жыл бұрын

Thanks for the support Tristan! I hope you are learning a lot because by the time you drive, you will know more about cars than most people on the road!!!

@AirDnB22 7 жыл бұрын

Tristan Keith same here

@aden3113 7 жыл бұрын

this stuff is too good not watch :D (I'm 16 btw)

@MrJohn2475 5 жыл бұрын

hey Chris! I just wanted to thank you for your videos, which encouraged me to take a 2 year mechanics course. I just passed the first module which is introductory, and now the second module is about brakes...I had no idea about all the physics involved and math formulas like calculating deceleration...anyways, thank you again and keep it up man!

@askgodalmightyfortheholysp4797 Жыл бұрын

Ask God almighty for the Holy Spirit

@zPICKLE 8 ай бұрын

What course are you using?

@badger0888 4 жыл бұрын

Love your Channel Chris! I just do the basic stuff but love seeing these projects--just for interest and learning.

@diabl834 7 жыл бұрын

Why the hell am I watching this? I don't even own a car and it's 12pm..... xD

@chbrules 7 жыл бұрын

Time to buy a car, friend!

@rickybrat4575 7 жыл бұрын

I don't even own a RWD or AWD car but this video was still interesting

@RANDOM-nb9sm 7 жыл бұрын

Mārtiņš Balodis where are you from its only 6:30 where I live

@tomscupra6345 7 жыл бұрын

GO TRUMP europa

@shayneobrien308 7 жыл бұрын

GO TRUMP same here. 7:07pm now

@kendrickminchew1855 7 жыл бұрын

I can smell the diff fluid through my phone

@chrisfix 7 жыл бұрын

ewwwww

@clayton8or 7 жыл бұрын

should probably check your battery lol

@IhateYoutube 7 жыл бұрын

Ugh that smell! Like... Carrots and Throwup! Even stink would say that stinks!

@religiousabuse 7 жыл бұрын

strong bad reffrence? idk if you were, because ive been watching a lot of that lately, and i could just be assuming

@flyinsushi8144 7 жыл бұрын

Kendrick .minchew if you ever smelled dif fluid before, you actually kinda can

@thebackwoodsmechanic5029 4 жыл бұрын

What I can appreciate is, the man uses basic hand tools to prove anyone can make repairs, save some money and learn something along the way Great content Chris Fix

@donovanlucibello379 Жыл бұрын

Solid tips and instruction here. I have been watching and referencing you (well made) videos for years. Keep up the good work, Chris 👍

@prezzzrock 7 жыл бұрын

I have no need to do 99.9% of things you show in your videos, but they are so well done, and interesting, I watch every one of them all the way through. Excellent job with your videos!

@chrisfix 7 жыл бұрын

Thank you. I am glad that you find the videos helpful!

@realtalk4689 7 жыл бұрын

Wow, I just gotta get a duel rear braking system. Your videos are on point

@chrisfix 7 жыл бұрын

Awesome and thanks!

@jakubpollak2067 7 жыл бұрын

Dual brake capilers exist? WOW I learned something new today (i don´t have a car or license, but this is interesting), you earned a new subcriber

@ChineseSweatShoppe 7 жыл бұрын

Jakub Pollák there are cars with pistons all around the rotor.

@markchidester6239 7 жыл бұрын

Jakub Pollák keep watching and learn as much as you can! Best thing you can do for yourself. Saves you a ton of money. What he just did would easily been 1k. Maybe more. I'm 50 now and still love playing in the garage.

@konturgestalter 4 жыл бұрын

man i love your videos so much. I learnt more about cars in 3 days watching your videos than ever before. I love the mechanical details you show. Thank you!!

@chrisfix 4 жыл бұрын

I'm glad you like the videos and you've learned a lot from them! Thanks a lot!

@JoseHernandez-lj5pd 2 жыл бұрын

I’m glad you started this channel! Great videos! Did you ever make a video on how to measure rotors when they are out of round, or warped etc? Plus, did you ever convert drum breaks into disk on that project car that you had? Thanks!

@Backwater_Boonies 6 жыл бұрын

Hey man I appreciate the vid it helped out a lot thanks

@cristianpinto1894 7 жыл бұрын

He made it seem sooo easy....

@chrisfix 7 жыл бұрын

+Cristian Pinto it is easy

@cristianpinto1894 7 жыл бұрын

It is it's just that Im lazy. Love your videos Chris!

@user-em1qf2kk3r 7 жыл бұрын

pretty sure u dont even have a car lul

@kangjohan78 7 жыл бұрын

I also wish I could snap my fingers and my stuff gets done. Man that would help heaps.

@flaminskull2030 6 жыл бұрын

It is easy as long as you know what your doing

@xottso 2 жыл бұрын

Can't recall seeing of a better KZfaq video: to the point, clear, concise, useful and essential tips, very well put together. Cudos!

@Ben-3984 2 жыл бұрын

You explain things very well with easy to follow instructions

@OhighOSkater 7 жыл бұрын

Videos like this is why I have post notifications turned on for your channel!

@chrisfix 7 жыл бұрын

Thanks a lot man!

@OhighOSkater 7 жыл бұрын

ChrisFix no problem!

@aaronm406 3 жыл бұрын

0:34 is the clearest view of Chris fix that we’ll ever get. Just noticed that rewatching this.

@alabamapsycho144 3 жыл бұрын

Thx for the vids Chris watching these has taught me so much I was able to help my dad work on his truck alot

@007jhagga 3 жыл бұрын

I like the atention to detail, the way you clean the components and the paint them... I usually do the same when i work on my trucks. that is what separate the average guy to someone who likes to take care of their vehicles. nice job man .

@nakayria164 7 жыл бұрын

Great Video ChrisFix, very detailed. Cant wait to see your drum to disc conversion.

@chrisfix 7 жыл бұрын

+Marlon McLaren thanks!!!

@JamesDuren1 6 жыл бұрын

Ik you probably won't see this since it's from a bit ago, but Im in a terrible place rn and severely depressed but your videos actually calm me and inspire me! Your always so happy and positive and you put sm work into these vids. All in all thank you so much

@bryannoyola7440 3 жыл бұрын

I hope you're doing better man

@gokudbz7842 2 жыл бұрын

same

@agrisimfarming 2 жыл бұрын

Same

@SmileyFace01 Жыл бұрын

It will get better, don't worry

@jhershy1381 Жыл бұрын

Many of us have been. Sorry and hope your getting by

@stuffwithknayt 5 жыл бұрын

Really cool idea, not just for drift purposes but aesthetics as well.

@LatinDanceVideos 5 жыл бұрын

Found this while researching how to fix a leak in my Toyota Prado diff. In my case the diff is leaking at the input shaft. Liked the methodology. Solid.

@prestondewhirst6602 4 жыл бұрын

Chris, do you think you could leave a link to your magic snappers in the description? It would be really helpful.

@Kamal_AL-Hinai 3 жыл бұрын

What's snappers?

@hassesp2336 3 жыл бұрын

When he snaps his fingers

@jayayyyyy 2 жыл бұрын

Yes, please. It would save me hours! I think the secret is in the gloves.

@rogerhupp3115 7 жыл бұрын

Why I love your channel! Straight to the point.

@chrisfix 7 жыл бұрын

Thanks Roger!

@alexzeamer5751 2 жыл бұрын

i got a sn95 and i'm currently converting it to a rally car and am loving these vids

@Idoitfortheskonkas 6 жыл бұрын

Man I wish u were doing these videos back when I was an apprentice. My manager didn't show me shit and all I learned was from other mechanics at the shop and just trial & error. Ur doing an awesome job bruh ! Keep it up👍🏼

@eduardov9630 4 жыл бұрын

Love your videos dude, I might never repair my own car but I learn a lot just watching you disassembling and reassembling everything. You're the best!!!

@BullettGuy 6 жыл бұрын

Love this channel. Great vid, Chris!

@chrisfix 6 жыл бұрын

Thanks!

@dosomethingnew7548 Жыл бұрын

I specifically love to see your videos because of your easy teaching ways

@mromagachi5194 5 жыл бұрын

NEVER IN MY LIFE OF 29 years have i seen such an amazing DIY and so helpful jesus i’m super happy i subscribed i wish i could subscribes another 10 times ur videos are amazing dude thanks

@jaydenaviation2974 7 жыл бұрын

I'm a simple person. I see a ChrisFix video in my notifications, and I click like. Then I watch even though I have no car

@chrisfix 7 жыл бұрын

Thanks a lot for the support!

@jaydenaviation2974 7 жыл бұрын

ChrisFix :)

@AmaZeGaIVIing 7 жыл бұрын

Always use lubricant while driving your bearings in.

@chrisfix 7 жыл бұрын

#truth

@AmaZeGaIVIing 7 жыл бұрын

That is what she said.

@xtrememachinez2061 7 жыл бұрын

ChrisFix do you still have your Ford ranger

@ahmedsoofi2924 7 жыл бұрын

+Log farhathami?

@JONMEREDITH 3 жыл бұрын

This video is great! Thank you for ALL of them! The best of the best!!

@SaintTheDreamer 2 жыл бұрын

This guy is really good, learning a lot of things from him, wish he was in BC somewhere

@saifalbalushi4888 7 жыл бұрын

hey that was a really great tutorial, can you make a tutorial how to convert the rear drum brake to a disc brake if its possible?

@nicholastij 7 жыл бұрын

Your vids are incredible you show the behind the scenes of cars

@chrisfix 7 жыл бұрын

Thanks a lot!

@MRVinydf 5 жыл бұрын

I am definitly never doing that to my car but it is so entertaining to watch your videos. Cheers!

@2CATSCS Жыл бұрын

I learned so much from your videos people Can see you put alot efort into your videos so thank you for putting that efort into your videos

@zacharyhalls9056 7 жыл бұрын

Loving your videos keep up the amazing work! I'm super excited about the DriftStang project!

@chrisfix 7 жыл бұрын

+Zachary Halls thanks a lot

@Lysergic_ 7 жыл бұрын

24 secods ago...

@legoholic89 7 жыл бұрын

ChrisFix I was wondering if you were able to use thread locker on the fill hole of the diff. Is it recommended or not?

@baowolf0011 5 жыл бұрын

Does anyone else want duel stock calipers now?

@Phyoomz 5 жыл бұрын

dual*

@EdyAlbertoMSGT3 5 жыл бұрын

Me.

@emptysoul4455 5 жыл бұрын

Hell yeah, definitely adding them to my 95 Mustang gt

@rileysmith9843 5 жыл бұрын

Me.

@BlackLocustPatriot 5 жыл бұрын

Yeah!

@tomjohnson4730 5 жыл бұрын

Hi Chris I truly enjoy your teaching videos. Before putting the axle shaft back in - I would clean the shaft area where the axle seal would normally be. A ring of dirt could be around the axle where the old seal would be and could cut the new seal causing leaks.

@RMDZ019 3 жыл бұрын

definitely Chris Fix's channel is one of the best by far!!

@ep0516 5 жыл бұрын

Lmao i remember when i was little my dad was changing his rear brake callipers but he had the emergency brake on, then he was getting frustrated, he soon realized like an hour later 😂

@chuculun15 7 жыл бұрын

Great video!!

@dantemusarella1190 6 жыл бұрын

Love your videos, how do you always make them so helpful and precise?

@Evokidbuux 2 жыл бұрын

Good morning Mr. Chris fixed it on a say thank you your videos have been very helpful I am currently trying to convert my S10 extreme into a drift truck. I've watched your hydro break installation video about 10 times and your dual caliper video about 10 times.

@danielashworth5281 7 жыл бұрын

Best SN95 how to videos on KZfaq.

@chrisfix 7 жыл бұрын

Thanks!

@op3l 7 жыл бұрын

WOW... that little C Clip is the only thing holding the axle in?

@chrisfix 7 жыл бұрын

Yes but it is pretty thick and wedged in there tight once the pin is in. But it is interesting how that works!

@xzibit442 7 жыл бұрын

just asking do you have a video out how to change drum breaks to a Calipers set up and some info about different calipers like single calipers to 4 or 6 calipers set up

@guesswho1905 7 жыл бұрын

ChrisFix are you ever going to weld to diff

@gunyvw 7 жыл бұрын

hell its only a pin holding the front nut from coming off on most cars

@krseverpatino5258 3 жыл бұрын

I watch and learn so much and re watch sometimes just cause you explain very well

@jkwo2007 3 жыл бұрын

Hi, dude, every work after your explantations, it starts looking simple and easy, or at least very clear. Thanks a lot.

@mhmadjamel4309 6 жыл бұрын

great job

@chrisfix 6 жыл бұрын

Thanks!

@samin90 7 жыл бұрын

"Always use lubricant" Always good advice

@chrisfix 7 жыл бұрын

#truth

@eddysomeguy5068 4 жыл бұрын

Hi dude, i am a new subscriber, all i wanna say is, apart of your attention to detail, the way you explain makes me feel like i can do it now with no fear. Awesome work you do, thanks for those videos.

@thiagofernando8941 2 жыл бұрын

Chris, this is the first video I watched from your channel and already subscribed. You have done a great job explaining step-by-step guide of each part and that is of much help for people who are learning. Thanks! ;)

@robloxrules4524 5 жыл бұрын

I own the same car as you do and I am doing whatever you do to yours to mine.

@TheTheRandomShow1234 5 жыл бұрын

Except your actually paying for all the stuff!

@Evanamartin 5 жыл бұрын

dream big buddy. your not a day over 12, based on your channel

@somedudeinchirons4936 5 жыл бұрын

@@Evanamartin 😂😂

@MilesPrower1992 4 жыл бұрын

Dream big, kid.

@jrservicecentergardner1053 4 жыл бұрын

Bullshit

@sleeks9939 6 жыл бұрын

If YOU EVER get into formula D drifting I am going to hold a huge CHRISFIX SIGN. HAHA.

@peterortiz9391 3 жыл бұрын

I've saved thousands of dollars doing repairs in my cars my self just by watching your videos. Thanks

@yufeizhao2384 5 жыл бұрын

I learned so much from your video's and they are very entertaining as well!

@izzaacalley 4 жыл бұрын

5:09 you're telling me that tiny thing keeps my entire axle from sliding out!? Holy moly that is a lot of faith in a piece of metal

@michaelwyatt241 3 жыл бұрын

Most of the car is metal

@vaisanentommi7037 3 жыл бұрын

Well its very strong+dont forget about brakes 🤭

@skythelimiteme1271 3 жыл бұрын

Nice clean work, keep up the great work

@WatchRichRebuildsChannel 6 жыл бұрын

Really good video. I don't even own a Mustang and I watched the whole video. Thanks

@bumvillestudios6678 3 жыл бұрын

I love how much thread locker he uses in his vids. Convinced his car is gonna fall into pieces lol

@chrisfix 3 жыл бұрын

You never know :p