Pro tip: screw your field point/ broadhead into the insert and use that to push into the arrow. That way you don’t run into any depth issues
@longshotdiedtired1582 Жыл бұрын
That’s always just seemed like common sense to me don’t know why people over complicate it and if you get epoxy all in your threads you should t be building arrows anyways
@bobyexley67752 жыл бұрын
Be cautious with the step he shows at 2:45 (flipping the tool around and re-inserting it to make sure the depth is set correctly). I did this and on 2 of the 6 arrows I was adding inserts to, I'm guessing it was this step where I must've unknowingly pushed the inserts even deeper into the shaft, and the result was my field tips were left with maybe only 1/8" of bite threading into the inserts, which were sunk too deep.
@xtreme85417 ай бұрын
Had the same thing happen.
@LARZ31310 ай бұрын
I tried to put the insert in just like this today. The insert was way too tight to go into the arrow. Customer was not happy.
@SS-ps5rg5 ай бұрын
What MM shaft? These came with my 5mm and fell in all the way.
@jamesstockton37772 жыл бұрын
Pro Tips= Don't use the green plastic push tool or the epoxy. The insert will float and doesn't set to the right depth. Use a quick setting glue and a field point. Let the glue set up enough to pull the field point out.
@bluegill20303 жыл бұрын
I hate HIT inserts, wish you guys would make Axis shafts that used normal insert!!!!!!!!
@kaizen50234 жыл бұрын
I nearly ruined $130 of arrows installing these inserts because they didn't come with instructions explaining they need to be jammed inside the shaft so far instead of mounted flush like a normal insert... geez! Fortunately the 90-minute epoxy wasn't dry yet!
@sanitarium44 жыл бұрын
I did the exact same thing. Thank goodness for the 90mins
@dillonnance42393 жыл бұрын
i ruined mine the only thing i know to do know is to order outserts and cut the arrows to where the insert will come out
@stickbowsniper77892 жыл бұрын
Why not just use standard inserts with the collar? Seems like you are making this more complex than is needed to be. What is the advantage of the "hidden" insert?
@Adamjmckay Жыл бұрын
Why is the insert tool longer than a field point or broad-head?
@Harvey-eb7wi5 жыл бұрын
Hey man I just bought a set of Easton hexx 400 wanted to see if you would are have done a review on them?Thanks
@22panthers3 жыл бұрын
What is the little red brick that comes with the epoxy and filaments?
@grapekrypt55573 жыл бұрын
What size is the hit tread inside a 5mm..?
@lcjjr.6714 Жыл бұрын
How do you remove them?
@J57133 Жыл бұрын
HIT sucks when u interchange points for hunting
@toreyyoung15183 жыл бұрын
You need new insert tools. They push in too deep.
@redneckfarmer65845 жыл бұрын
Y'all are making this hunting too difficult. No wonder our youth don't want to get involved.
@jurisprudence65494 жыл бұрын
You can buy arrows that are already built. Beyond that, if you're going to hunt with a bow and take the time to become a good archer (as you should if you're going to hunt with a bow) then what's a few hours spent building some arrows?
@cHoLoM3oW3 жыл бұрын
@@jurisprudence6549 I find it rather therapeutic
@1989inception3 жыл бұрын
There is nothing like taking wild game with arrows you fully built yourself
@Sapper_Rage3 жыл бұрын
So what you're saying is you're too lazy to build a better arrow and that you're raising lazy children?