How to Install Engine Oil Pan - Rebuild the 289 Ford

How to Install Engine Oil Pan - Rebuild the 289 Ford - Part 12

Рет қаралды 5,610

Жыл бұрын

Today at Alf's Mustang Garage, we are working on the 289 engine rebuild and we are installing the oil pan.
The book I recommend you buy for your build. You will not get all the information there is to know from watching these videos. This book will help guide you through everything. www.npdlink.com/product/book-...
Things I used in this video.
As an Amazon Associate I earn from qualifying purchases
Replacement Oil Pan amzn.to/3VzukTv
ACP one piece oil pan gasket www.ebay.com/itm/225422631846
Permatex Ultra Black RTV amzn.to/3AzfhiV
Engine assembly lube amzn.to/3JomXKr
Lucas break-in oil amzn.to/3JOJGiA
GoPro Camera & accessories amzn.to/2NwysVu
Lighting set up amzn.to/3ph54R2
Basic mechanics tool set amzn.to/3ob7q2B
Subscribe to the channel and click on the notification bell. / @alfsmustanggarage
We want your thoughts and comments below. What kind of project are you working on? What Mustang are you daily driving?
Alf's Mustang Garage is not responsible for any mechanical or technical error that you may encounter when working on your own car. You are responsible for your own quality control and your own proper repairs.

Пікірлер: 46

@alwayslearning8365 Жыл бұрын

Thank you for this video. 👍

@AlfsMustangGarage Жыл бұрын

You're very welcome

@eltonlacey-ck1uw Жыл бұрын

Brother im not what u would call a mechanic but u explain everthing better than anyone could 4 me 2 understand, Im 70 yrs old n you have inspired me to try all this myself ,i would love 2 finish my 66 before i pass on .keep up what u an th guys r doing.

@AlfsMustangGarage Жыл бұрын

Well I have to tell ya, it's feedback like this that really makes doing these videos enjoyable for me. I really appreciate you taking the time to say that. I will do my best to keep them coming.

@BPattB Жыл бұрын

Now that i am confident about my oil pump and oil pump drive shaft clearances ill be watching this video tonight or possibly tomorrow!!!! Thanks again.

@AlfsMustangGarage Жыл бұрын

Awesome, you're very welcome.

@nunyabiznez3584 Жыл бұрын

I really like that gasket, Sure beats the old cork and rtv method. Thanks for the video! 👍

@AlfsMustangGarage Жыл бұрын

Absolutely!

@blbenson8548 Жыл бұрын

Little dob is a great idea! Thank you for the video.

@AlfsMustangGarage Жыл бұрын

You're very welcome

@robertclymer6948 Жыл бұрын

A little dob will do ya! Kinda like the head to china walls, in those corners, but it is a must do.

@AndyKruseChannel Жыл бұрын

This is turning into a great series!

@AlfsMustangGarage Жыл бұрын

Thank you sir Andy! Lots of videos to be made when doing something like this.

@BPattB Жыл бұрын

👍

@gmarshall1026 Жыл бұрын

😊great stuff mate

@AlfsMustangGarage Жыл бұрын

Thank you!

@robertclymer6948 Жыл бұрын

I have had excellent results using a Moroso rubber steel core gasket also. Googled ACP gaskets, and comparing prices.

@AlfsMustangGarage Жыл бұрын

Oh ya right on. I bet those are pretty good. I'll have to try one next time.

@robertclymer6948 Жыл бұрын

@@AlfsMustangGarage Good but expensive. I hate leaks, big time. Oh, got the top end back on the 460. Small coolant leak at the rear china wall.................... Dammmmmmmmmmmmmmmmmmmmmmmmm. Raised torque to 31 or 32 ft pounds, will re-start and see if I will be pulling the manifold again, lol

@AlfsMustangGarage Жыл бұрын

Oh gosh ya I hate leaks. These old engines don't seal up as well as modern engines so we need all the help we can get.

@robertclymer6948 Жыл бұрын

@@AlfsMustangGarage Hi again Alex! Question sir. "IF" I have to repull the manifold to fix rear china wall weeping coolant, DO I have to install new intake gaskets again? I didn't use those rubber end seals, probably should have with a dab of Untra Grey on them and at the corners Thanks much! Appreciate your feedback.

@AlfsMustangGarage Жыл бұрын

Well I typically install new ones just because I feel like the expense of another set is easier to handle than the risk of having to do the job again.

@AlanSchildroth Жыл бұрын

Looking good! I missed though if you degreed the cam? What is left, to tighten up the top end?

@AlfsMustangGarage Жыл бұрын

I did degree the camshaft. However, my footage was awful. I'm going to refilm that on my next rebuild and throw it in this Playlist.

@flying_Turtle 3 ай бұрын

I already bought an oil pan gasket from npd, and it's cork with rubber pieces for the front and back. Where do i use silicone on it?

@Craspan Жыл бұрын

👍

@AlfsMustangGarage Жыл бұрын

👍

@hughphillips67Mustang 3 ай бұрын

So if I send you a back up 289, you will rebuild it for me to keep as a back up for my 67? Lol

@AlfsMustangGarage 3 ай бұрын

Absolutely!

@whiteboy_rick Жыл бұрын

Have you ever seen oil in the gas? And what would cause that situation?

@AlfsMustangGarage Жыл бұрын

I've never seen oil in a gas tank naturally. Sounds like your fuel is contaminated or your tank is due for replacement.

@scottcatron3924 Жыл бұрын

When u painted the oil pan did u brush it on.

@AlfsMustangGarage Жыл бұрын

Yes

@hughphillips67Mustang Жыл бұрын

Did you get my message on Facebook? I wish you were closer to me (Ohio). I would come work for you. Just because I love classic Mustangs that much. Lol

@AlfsMustangGarage Жыл бұрын

I did. And I responded. It's definitely hard to find good help. Helps to have passion though.

@hughphillips67Mustang Жыл бұрын

@@AlfsMustangGarage I sent you photos. I don't know any other way to contact you.