You are a lifesaver, my new LEDs were upside down and the vendor kept on suggesting I had my headlight hoywsing upside down, as it turns out they had to be rotated 180 degrees, No instructions included I was SO frustrated until I saw video explaining hiw to rotate the bulbs THANK YOU !!!!

I recently ordered the H13 2Stroke 3.0 for my 2007 Ford F250. I installed them as suggested in this video, perpendicular with the LEDs pointed horizontally. I struggled with how very low on-road output and even on the wall the beam was just scattered. So I compared how the OEM sylvania bulb mounted into my Ford OEM housing and noticed it can only be installed one way due to one of the mounting tabs being larger than the rest of the tabs. With that, the filaments are actually not perfectly perpendicular as you guys suggest. It is pointed at about 10 o'clock and 4 o'clock, so diagonally. This is the same for both passenger and drivers-side housings. I oriented the 2Strokes the same way and to my surprise the beam on the wall was no longer scattered and a defined hotspot appeared. The on-road light output was also much 100 times better than initial.

Another helpfull video, thanks Chris. I will buy LED's from your company because of these videos that you make.

If you came here looking fir the answer i was, not to knock the video its fantastic, HAT GOES ON TOP, THE HAT KNOB TO LOCK THE BULB IN PLACE GOES ON TOP. your welcome.🎉

I have the H13 LED bulb from XKGLOW installed on my 2013 dodge challenger R/T. I have the main headlights, the switchback bulbs and fog lights. Zero problems with the switchback bulbs and fog light bulbs. The main headlight bulbs are very problematic. When you reach 95 mph, they start to flicker, the faster you go, the more they flicker, 115 mph, they flicker like crazy. Today i was racing around enjoying some spirited driving and the drivers side headlight low beam went out. I love the look but they are inconsistent at best. I have also tried Lightening dark, they are really good, they do not go out, but they also start to flicker at high speed. Its not an electrical problem, I put the stock halogen bulbs in and no problems with flickering at any speed and they do not go out.

Hope u still look up here but I have a 2011 mustang v6 base and I have already bought 3 different sets of lights the problem is the new light plug is small with 3 prongs and the car looks wide , flat with 16 pins I want to know how I can convert my halogen to LEDs on a budget

I notice one led light has the light chips in different positions 3 chips on top and 3 chips on the bottom in a zig zag pattern. Does it matter which row of chips are on the top?

Put the morimoto h13 on a Lincoln mark lt. Saw it wasnt straight but then noticed those tabs. They are extremely bright.

you guys need to test the slyvania leds from the parts store... and do a video on it

Does a 2009 Hummer H3 take H13 bulbs also?

Having a lot of trouble trying to fit these led lights into my 2013 camaro ss. And I know 2013 camaro takes H13 headlights I don’t know what the issue is. But turning it and trying to lock it in place is not getting in. And I’m not able to get connected and get it to lock any help?

Awesome videos! Very down to earth fast and no BS! I have h13 out of the 2006 ram 2500, love the GTR lighting ultra2 but I'm choking on the price,. Will a run of the mill HID perform similarly in brightness? Install complexity not withstanding of course. Furthermore, I am a ham radio operator, I anticipate the RF noise to be a bit worse with the HID vs LED. Thoughts? Thanks!

I'm looking to replace the headlights on my 2010 F150 Lariat. The current bulb is a h13, however it seems any replacements that I find around only fit a h7. If I do get a replacement set I'm assuming that I will have to eat the cost of my H13 LEDs, for the H7s? Is this correct or can the H13s be utilized as well?

I bought the gtr ultras 2 and the PWB modules do the install on the lower bulbs in my f250 super duty

I installed a set of H13 led bulbs on a Lincoln LT and 9145 led fog light bulbs. My problem is when light switch is on parking light position I can turn the fog lights on. When I switch them to on (Low beam position) the fog lights go out. If I turn the fog light on it automatically turns the high beams on. Any input on this issue would be appreciated. Btw I have checked polarity and that is all good. I'm thinking it may need a decoder harness but IDK.

Love your products is this the same h13 lights they use in snowmobiles?

Thank you very much for making this video. This helps me alot

does the gmc yukon 2009 take h13s as well? i want to intsall em but cant any info anywhere

Does it matter which leds are on top or bottom for high and low on the morimoto 2 stroke

Have a 2020 nissan nv1500 it has daytime running lights bought a set of h13 but they flicker when daytime running lights on . On the left side would i need resistors or a harness ??

So If the hi and low led chips are offset from one another, which is top and bottom?

Awesome videos. Thank you Sir.

Whats the brightest h13 bulb you would reccomed currently run hikari and they arent too bright

Help 🆘 06 Durango 9008 H- 13 LEDs stay on when switch Is off /key off 📴although not at full brightness ,but more than ghosting ?thank you for your time.

I have a 2013 f250 that takes h13 bulbs I'm thinking about get the gtr mini but my truck has day time running lights and I don't know if they will work or not

Good Stuff & Great Tips 👍 Thanks!

i have been told the ford f-350 has issues with using the H13/9008: GTR LIGHTING ULTRA 2.0 as the computer is saying lights out??have anybody heard anything like this?? thanks

Does it fit with the 2012 Chevrolet Cruze Lt ???

If I was to replace the h13 bulbs in my Dodge Ram will I get an indicator staying light out?

Is it normal to lose flasher functionality when LED's are installed???

Hi Chris. I'm so new to this. Just a curious question, what will an H4 bulb pattern look if installed in an H13 housing?

The pwb,s install on lower bulbs only. Correct?

Great info, thanks.

how do you get the headlight out of the car?

I have a 2013 chevy cruze that takes the h13 bulb and when I put my led in and turn it to tighten it it doesn't line up right. The LEDs are supposed to be at 9 and 3 but I can only get them to 2 and 8. Is there anyway to fix this? I have 2 auxito 9008/h13 high and low beam LEDs

How about coming up with a LED Bulb that fits the 2017 JEEP JK Factory LED Bulb? Mopar Part Numbers are: 68366024AA & 68366025AA These Bulbs are about $500 each. Im thinking this is Highway Robbery!

I'm installing h13 led lights in a 2018 kia soul .my problem is the both leds are lighting on low beam and only 1 is lighting on high beam. The plug only installs one way . I can't reverse polarity

Do they overheat? What if the fan goes out

2011 GMC Yukon. What led would you recommend for headlight and fog light

I keep buying led headlight h13 bulbs but there always flickering on my ram what can I do to fix that problem.

Hey man am having trouble installing my led because they are facing up and down

Hi What LEDs setup you recommend for a 2011 jeep liberty (Canadian version that runs daylights) that doesn’t flicker? Thanks

After leds installed, now when i turn on my fog lights high lights get on instantly. Help

Does it fits at Hummer h2?

hello, i installed this h13 on nissan nv200 2015, only high beam work but not the low beam, anyone can help pelase

Best h13 led is ? Please link 🔗 I have Escape 2010 all i buy is shit

I have a question does the bright chip need to be up or down