Great job man ! Video is really good and explained very well! I installed on my Grand Voyager, already and it's pretty same. Next will be on my Dodge neon ! I love this stupid things ( stupid because if you buy a really cheap one may have the luck that keyless to letter you down when you are most happy! Hahaha )

Figured the push button start”thanks to this video. I think I’m going to use the brown wire to trigger my intercooler pump.

If you buy a legit car that has been cheaply taken care of but you want to spend a moderate amount on it (oil, tune up and fixes) then this is great. Push button start with will make the car slightly more awkward to steal once the panels are buttoned back down. Turning a screwdriver or tire repair tool to start a car puts the gas station attendants and nosey jerks on high alert so a push button is the best of both worlds you don't have to take the key in and out and you can still start it without raising anyone's suspicion. Also if you're installed one it also lessens suspicion because you wouldn't waste money on something nice like that if it was a throw away stolen car. That is why I'm doing mine, my car was neglected but now I'm nursing it back to normalcy. I'm missing a few wires though. Don't see a ground or Key On. 1. I mean ACC and Key on 2 makes sense to me not sure what Key On. 1 is for... Also have to figure out how to tap the brake wire to the clutch one I'm guessing.

Thak you for the video. I was concerned about the shifter and steering lock. Your video answered my questions.

We went with the same thing in our coyote swap 95 f150. It's about 50 bucks now. Great stuff

love the video

Very good video, excellent details on how to do.. I suck at wiring.

Looks like a great kit for someone to steal any car they want

You could always just super glue your key in the ignition and have a “turn to start” set up.... same principal

Great job explaining. I am still considering this upgrade, nd had not thought of the transmission lock until you mentioned it. I drive a truck with trans on the column nut will still have that prob, but it makes not sense to do this and leave the key cylinder as part of start up. Thanks

Great Explanation.

Thanks man appreciate the video!

Great video and thank you

tres puntos like spider "spread it out like a spider" jkjkjk thank you for the video this is super dope thumbs up homie

Excellent video!!

Good shit homey!

Will work for my 2008 Pontiac g6 gt push start

Damn good video!!

great video thanks!

Nice video! when you remove the ignition key cylinder should the power be on or should you disconnect the battery? aslo after its removed will the steering wheel stay unlocked? would like to do this in my 2012 camaro Thanks

HA! I'm sitting here waiting for Amazon to deliver my Start/Stop unit for my Stratus so I thought I would check KZfaq for some videos, and what do I find? Thank you for the clear explanation and for showing the wires, I wasn't sure which one was the starter wire from the ignition switch, but I see you have yours hooked up the the yellow wire. Also, I never even thought of the shifter lock-out, so I disconnected the cable like you showed. I was actually wondering what the cable was for. I want to keep the barrel in the column in case the Start/Stop button poops out. Thanks for the great video. Thumbs up!

+Mizta Shy I installed this on my truck, started the accessories and everything but the engine. This happened the very first try. After that I can only hear the beeps and the button lights up everytime I step on the break, even while driving. Any clue?Any help would be very appreciated.Thanks.

Can I do this for a mini 2003? I love the car but want to do little upgrades ✌🏻

put a soleonoid on shifter thats soft the issue with gear lock

Great explain video

You could mount the shifter lock cable to the brake light switch area , so the brake pedal has to be pressed to shift out of park! 👍

Cool idea but too many concerns with installing in a vehicle that issues standard key start . Steering wheel don’t lock , and neutral safety switch doesn’t lock the gear shift .

Great job ‘ thx

I always wanted push start, but my buddy had bad experience. On the way to Vegas the ignition started going off while driving. He had to pull over and rip it off

Excellent Vid. Can explain with manual transmission?

Very good work, do you think this system will be possible to install on a boat like a bayliner ?

Ah yes. Same as my car 😊

Nice. Thanks bro. 👍🏻👍🏻

4:56 “it could cause problems, or accidents- but anyways”

On my 01 bonneville the ignition isn’t on the steering column but it’s located where the push start would be

I love push to start

So since I need a ignition switch anyways this would be a perfect solution!

mine works fine all these haters probably never bought it or tried it F the haters it works great had it over a year

Hey Bro Do You Think This Will Work On A 1984 Grand Prix Pontiac ? & Awesome Job By The Way

so when you take the barrel out is it still in position 1?

I have a push to start but I was so interested so I watched it anyways lmao

What does the antenna activate bro? Nice video btw

theoretically can you hotwire your car and install of touching the wires together to start just install a momentary button, then use keys for everything else, insert key turn to on position then push hidden button to start?

Are you able to remove the key after removing the barrel?

How close does that antenna have to be? Can you keep the little antenna piece in your pocket? Or do u have to place it right next to the receiver?

What's up bruh I know that you made this video last year. I am installing the same push button system on my 2014 Mustang gt. Can you give me some insight on how to install and where to begin ?

What is the difference in function between white and brown wire?

Push to start is cool and all, but they should still require a key. Well, not the conventional metal key we use for our house, but a place where you plug in your smart key and then push to start vs it being on the seat and starting it...

hi how I connected wire in corolla 2014 please answers??

congratulations, you just made your car easy to steal, smash the window, open the door and drive away

3:20 do you leave it in position 2 before you remove the barrel ?

Can you keep the cylinder keyed option active, while using this keyless system? "Just in case the keyless system Fails 6 months down the line"...

Hey for start stop button when it shut down engine it always lights? Or not ? i ask because mine always lightning... 😊

Can this kind of installation work on Chrysler Neon 2004? Since my ignition Actuator that connects to the ignition switch is broken, i have installed a temporal push-start directly from a battery positive terminal and starter. Works fine but i do not like the way installed this.

Nice

Instructions unclear my car is floating now

Thanks man

Is there a way to bypass stepping on the brake to start? Also is there a way to push the button once and have the vehicle start up?

Good shit fam .....

Where do we buy the product?

Will it also work with auto start?

What wires do I have to connect if I have to put up transporter

Hi, nice video, jist what i need, whre can i find this? Willnit work on a 2009 ram 1500?

can i just tap the wires without disconnecting my ignition? so that i can stll use my key if somthing went wrong on pushstart button

Can u keep the ignition Key barrel in when you just all the push button start. And will the key still start the car?

so after you use that car u need to tap again ung rfid so the push start wont work?

Would this work with a 2006 Impala SS with factory remote start and my key has a smart chip in it. And what is this kit that you used.

Professional car locksmith here. I DO NOT recommend doing this. IF you have a problem, or lose/break your key, Then we won't be able to help, and towing to the dealer will be very expensive. Keep it stock. It won't add any resell value, and it will be much easier to lose your key that way. Also why is it suposed to be so hard to put your key in your ignition now?

How bout a vice versa method? Turn a push to start ignition into a Key switch.

I have a 1986 I’m working on the damn thing has no accessories (blue wire) it has the yellow +start” brown + start without electricity” Red 12v” Instead of a white wire there’s a orange one a pink one and 2 other wires green and black and white All are +12 v with key on lolz The push button start has not arrived yet but your video was very helpful Didn’t know this push button start had a function to only turn on accessories “like radio” I’m gonna have to dig out my cars wire diagram thanks for the video “gives me a good idea how this works.

Damn bro be nice if you answered comments

I have a question I have a 2003 Lincoln town car the key won't turn over can replace the ignition cause the key won't turn over. I'm looking at getting a push start button then won't need the key any adv plz

Could you just put the push button where the key lock was? I really want to make my 2019 Fiat 500L lounge a push to start/ keyless ignition & don’t want to cut holes anywhere on the dash. There isn’t really any room on the dash for it either.

I need help! Where do I put the ground wire

Hi thank you for video...what brand is push button?

But if you remove the key system, what to do if steering wheel locks it itself? How to unlock the steering wheel?

What push to start kit was that?

Will these work for a manual gear train car?

Any idea to... Skip the button altogether? Say, scan a chip and the car starts? I'm looking at a big project for a 2003 Dodge Stratus and I think you might know the best way to go about things.

I have a 2004 Mazda 3. I installed this, however, it won’t start without the key lock cylinder and key inserted. Also, the steering wheel is lock when I start with the push button and the key in the ignition. What do I need? A bypass module? Can you recommend please? Thanks

In this push start button work in innova 2010 model???

Is it necessary to remove the pre installed or stock central lock system as has it own remote control as well?

Good video... "Like a spider spreading it's legs " lol

Hey would you be able to do it on a Buick Century 99

can you explain how this works with immobilizer? and what is the job of that RFID tag?

Need to do on a 2006 caravan

Does this work on a manual? I've been trying to get it to work on a 1995 Tacoma manual and I can get it to crank but it won't start. If I put it in acc it cranks and starts but it won't shut off. I don't get what I'm doing wrong.

Does this work for a mazda protege 03 manual?if yes pass me the link to buy one

Could you do something like this on a 2005 grand Marquis?

👍👍👍🏁

I’m about to get me a 2003 Chevy Tahoe and I’m about to get that system and have the dealer ship install it or have car stereo one install it

Hi m8 can you install this device in to a daisle cars thank you

Where did the brown and white wire connect to

Do you know if this can be done on a 1984 delta 88 Oldsmobile????

This is a one-push start, right?

I got it connected and it all works like it should EXCEPT that when I turn it on using the button the AC compressor doesn't engage and get cold. Anyone have any idea why that would be? I notice there is like one extra wire coming from the harness that also turns on at IGN 2 position but I can't find any documentation for that wires function and doubling up on the IGN2 wire still doesn't work.

I have manual with wiring for entire vehicle...

What if you push that button by mistake while driving? I don't think it has a safety feature for that, given the price and the simplicity.

Oil pump signal, so they mean tach wire?

Does it work in a corolla 2004?