How to Install Quarter Round (with a finished end cap) for Beginners!

Рет қаралды 428,984

Жыл бұрын

Tools Used in This Video:
- Gartol Ratchet Miter Shears: geni.us/GSaARRX (Amazon)
- Gartol non-Ratcheting Miter Shears: geni.us/9y5HmQe (Amazon)
- DAP Rapid Fuse Glue: geni.us/yVhYJX (Amazon)
Installing quarter round is not hard, even when you do not have a saw. But you should also know how to install a proper quarter round end cap for your baseboard trim. This video covers all of this.
Join our community by subscribing to Reluctant DIYers here: / @reluctantdiyers
This video is not sponsored. Some product links are affiliate links which means if you buy something we'll receive a small commission that helps us create more videos. We only recommend products we own and love, or those that we would purchase for ourselves.
Our mission at Reluctant DIYers is to help YOU overcome challenging situations, find ideas to help you create new options in your living space, and Do It Yourself with confidence. Whether you want to DIY or not, this channel is for you. From simple tasks to more complex creations, we'll cover it all.
#QuarterRound #ReluctantDIYers #ShoeMolding
Credits:
--------------------------------------------------------------------------------------------------
Song: Funky Parts / Valante / courtesy of epidemicsound.com

Пікірлер: 312

@ReluctantDIYers Жыл бұрын

What do you think of this installation method? - Gartol Ratchet Miter Shears: amzn.to/42Vns69 - Gartol non-Ratcheting Miter Shears: amzn.to/40V9UpI - DAP Rapid Fuse Glue: amzn.to/3KmKZpn

@michaelrutledge7048 7 ай бұрын

Sorry, not a fan of your method. Wayyy too complicated and creates 'make work'. I've been doing trim work for 50+ years. While using a miter saw is the preferred tool to use... normally, a 30º clip at the end. Another method is to round the end, using a disc sander or, if you don't have one, use a wood file/rasp and orbital or quarter sheet sander. I've done MANY jobs where the client liked a rounded end of the shoe. Technically... you use base 'shoe', NOT quarter round in this application.

@ReluctantDIYers 7 ай бұрын

@@michaelrutledge7048 I appreciate and value your opinion. Thanks for watching and for sharing!

@givingtreeoflife 6 ай бұрын

You sell those shirts?

@ReluctantDIYers 6 ай бұрын

@@givingtreeoflife I do… check out the store tab on my channel.

@francesrosa7577 3 ай бұрын

I like the way you teach..😊 You don't make anyone feel dumb. I appreciate it 😊

@ReluctantDIYers 3 ай бұрын

Thank you so much! You seriously just made my morning. I appreciate you! Now go Have a great day!!! 👍🏼👍🏼 (BTW… I was sick of watching terrible videos that made ME feel dumb when I was just trying to learn a new skill… another reason why I started this channel.)

@makeitjoyful 5 ай бұрын

Thank you! I've been wondering how to do this but didn't know the term to search for. Your video just happened to come up during a different search. Thank you!

@ReluctantDIYers 5 ай бұрын

You’re very welcome! Thanks for watching! 👍🏼👍🏼

@n.e2099 5 күн бұрын

This video is great not everyone has the best experience with professionals . I’m glad you posted this video

@ReluctantDIYers 5 күн бұрын

@@n.e2099 Thanks for your encouragement! ❤️

@dustongladfelter1153 9 ай бұрын

Thank you for the video. Showing how to cut and install those "end caps" on was clutch!!!

@ReluctantDIYers 9 ай бұрын

You’re so welcome! Thanks for watching!!

@christophercharles9645 3 ай бұрын

They're called "mitered returns" if you want to relate it to a designer or carpenter and they look at you funny when you say "end cap".

@ReluctantDIYers 3 ай бұрын

👍🏼

@hersonlamolli6162 11 ай бұрын

Thank you so much! Outstanding and simple instructions!

@ReluctantDIYers 11 ай бұрын

You are very welcome! Thank you so much for sharing your feedback, I'm seriously super happy this was helpful!

@brentufkes6846 7 ай бұрын

You are correct. I apologize if I’ve offended you. There’s a difference between constructive criticism, maybe an experienced suggestion, and just flat out attacking people for no reason. Have a great week!

@ReluctantDIYers 7 ай бұрын

No offense taken man. I agree with everything you have said, 100%. Thank you for weighing in on the nonsense. 👍🏼👍🏼 Have a great week!!

@seh0041 Жыл бұрын

We just had new vinyl plank flooring installed and I thought the ends of the quarter round looked unfinished. I really like your idea!

@ReluctantDIYers Жыл бұрын

Excellent! Thanks for watching! It definitely gives a nicer finished look.

@Worldwidegiantgrowers 6 ай бұрын

I do vinyl plank flooring and install shoe molding, sometimes quarter round it’s not the same thing but I would gladly finish off the ends and I sometimes do if the person is willing to pay me for the additional labor it’s all about time

@ReluctantDIYers 6 ай бұрын

@Worldwidegiantgrowers Makes great sense, thanks for sharing!

@jenathome73 6 ай бұрын

There are many ways to fix this problem…do what works for you! Great video on another way to do it. 😊

@ReluctantDIYers 6 ай бұрын

Totally agreed! Thank you so much for your encouragement Jen! 👍🏼👍🏼👍🏼

@jenathome73 6 ай бұрын

@@ReluctantDIYers like the shirt!

@ReluctantDIYers 6 ай бұрын

@@jenathome73 Thanks! You can but it in my store tab. 😉

@noelmilleryoga5993 Ай бұрын

All the people saying shoe moulding is better... in my case it is not. My home is a 1980s townhouse and the entire home has quarter round on the baseboards. I needed to replace some baseboards after a water damage incident, and in order to match the style of the rest of the house, I used quarter round to finish the job. So yes, maybe shoe moulding looks better, but it's not the only option and in my case not the most appropriate option-- for continuity's sake. Anyway, thank you for this video, it helped me greatly.

@ReluctantDIYers 29 күн бұрын

I’m so happy this was helpful! I also agree 100%. 👍🏼👍🏼

@Bennovember1 Жыл бұрын

Great video!

@ReluctantDIYers Жыл бұрын

Thank you so much!

@givingtreeoflife 6 ай бұрын

I love the shirt, gonna try to find some, unless you have them from your channel. Would love to order them.

@ReluctantDIYers 6 ай бұрын

Yes! Check out the store tab on my channel. Thanks for the feedback on my merch! 👍🏼👍🏼

@ReluctantDIYers 6 ай бұрын

Wait for tomorrow… sale starts then.

@tphannah 19 күн бұрын

Excellent, this worked for me.

@ReluctantDIYers 19 күн бұрын

EXCELLENT!! I’m so happy this helped! 👍🏼👍🏼

@blaster-zy7xx 7 ай бұрын

Same idea, but when I need a shaped return, I most often hit the end with my belt sander. This avoids needing to fill in the seam.

@ReluctantDIYers 7 ай бұрын

Another great approach! Thank you for sharing! 👍🏼👍🏼

@kimburke-smith1123 3 ай бұрын

Thank you!

@ReluctantDIYers 3 ай бұрын

You are so welcome!

@HebaruSan 16 күн бұрын

3:26 - A nice idea for certain situations surely, but I'm not loving the gap it creates between the top and the next vertically oriented piece. Maybe change the backwards-turning joint to a downwards-turning one to preserve the straight up and down edge?

@ReluctantDIYers 15 күн бұрын

Interesting thought…

@markgarland9000 7 ай бұрын

Having been a remodeler since the early '70s..here's how I would have handled this one. On the right side: continue the quarter round beyond the vertical trim by undercutting the back side to ride over the trim. Go past by the amount of the thickness of the q.r. plus another quarter inch. Then use the tool to create the return. Since the q.r. is thicker than the trim it cant just die into it. On the left side: don't stop short of the adjacent stair trim and leave the gap. Since the q.r. thickness looks to match the thickness of the stair trim, continue on to the stair trim a sufficient amount to get one nail into it and then enough to round it off with the pliers cut. Btw..thats a handy tool. I made hundreds of miter cuts doing a circular stairway raised panel effect all with an upscale- but hand operated- miter box. Ugh!

@ReluctantDIYers 7 ай бұрын

Thanks for sharing!

@kyler3683 6 ай бұрын

Ok, this should have the caveat of “for paint grade only”. In my opinion a back cut of 30 degrees looks better than that mashed miter. Not to sound snobby, proper application is base shoe, it’s 7/16x9/16 similar look but doesn’t stick out as far as quarter round. Pvc base shoe would probably cut way cleaner with your hand shears, but honestly, in the trade we only use those on chamfer strip.

@ReluctantDIYers 6 ай бұрын

I agree… however, my entire house is 3/4” shoe (aka quarter round) so I kept it uniform. 👍🏼👍🏼

@JT_70 7 ай бұрын

I’ve seen quarter round used mostly to cover up gaps between poorly installed flooring and the baseboards. Shoe mold looks so much better.

@ReluctantDIYers 7 ай бұрын

I agree. Unfortunately, some of us with older homes have A LOT of quarter round so it’s expensive to replace it all. 👍🏼👍🏼

@alext8828 3 ай бұрын

Right you are. Base shoe is the correct molding to use. Only amateurs use quarter-round.

@noelmilleryoga5993 Ай бұрын

Nope. Not if the entire house has quarter round already installed.

@alext8828 29 күн бұрын

@@noelmilleryoga5993 Better to do the job right rather that match bad work.

@noelmilleryoga5993 29 күн бұрын

@@alext8828 This is beyond inconsequential for me lol. I will never think about this again beyond this thread.

@chrissmith6495 16 күн бұрын

Great information!What kind and size of nails (brads?) and what kind of gun are you using?Please pardon if you've already answered this.thanks

@ReluctantDIYers 15 күн бұрын

I mistakenly used 16 gauge finishing nails on this instead of 18 gauge. But 18 is the size I would recommend. 👍🏼

@csimet 7 ай бұрын

If you absolutely have to install quarter-round or shoe-mold, then these are some great tips. Me... I hate the look of quarter-round myself and rather live with minor gap between the base and floor, as long as its not more than 1/16-1/8" max. If it is, I then scribe and sand the bottom edge of the base to fit or use some caulk to fill the gap (assuming you have painted base). A no-quarter-round look just looks more modern, if that is the style you are after.

@ReluctantDIYers 7 ай бұрын

Thank you for taking the time to share this! Great feedback. 👍🏼👍🏼

@cdb989 4 ай бұрын

Good tips me personally don’t use quarter round I like using door stop clean look IMO

@ReluctantDIYers 4 ай бұрын

Thanks for watching and for sharing!

@tommycorbet 6 ай бұрын

While your at it, is there a better way to transition from the stair trim to the baseboard?

@ReluctantDIYers 6 ай бұрын

Sounds like a good future video… thanks! 👍🏼👍🏼

@Eddie510s Жыл бұрын

What grit sand paper do you use to sand off the holes ? Thank you awsome video

@ReluctantDIYers Жыл бұрын

3M High Strength Hole Repair doesn’t require a coarse grit sandpaper

@Elsa-qy9hr 7 ай бұрын

I dont like either way "they" typically cut 1/4 round ends, looks cheap. You showed me the best way 👍 thanks

@ReluctantDIYers 7 ай бұрын

You’re very welcome! Have a great day!

@nathangardner772 7 ай бұрын

1/4 round or base shoe look cheap regardless. Installing the baseboard over the floor with no gap is far superior.

@ReluctantDIYers 7 ай бұрын

@nathangardner772 No argument here… unfortunately not all flirting installers can get this right. 🥺

@luispavon574 2 ай бұрын

0:24 - what kind of material did you use to make that stair nose?

@ReluctantDIYers 2 ай бұрын

That is Oak. 👍🏼👍🏼

@kyleallen1858 11 ай бұрын

Do they have 22.5 option on the shears?

@ReluctantDIYers 11 ай бұрын

Not on the shears I have. The lowest angle is 45.

@thane4647 3 ай бұрын

Does the finished end cap only work for quarter round and not shoe?

@ReluctantDIYers 3 ай бұрын

Never tried it on 1/2” shoe, but that sounds like a challenge. 👍🏼

@robertbutler8004 6 ай бұрын

Here in Australia, we call that product quad.

@ReluctantDIYers 6 ай бұрын

Very cool to know! Thanks for sharing!

@davidlorin1379 3 ай бұрын

Nice job splitting the quarter round with the first nail.

@ReluctantDIYers 3 ай бұрын

Thanks! 🤣🤣

@rickwagner6408 7 ай бұрын

For starters use a saw!

@ReluctantDIYers 7 ай бұрын

I think I mentioned that a saw is preferred (it’s been a while so I might be wrong) but for many beginners, miter shears are perfect when you don’t have the money for the saw or when your project is small. 👍🏼👍🏼

@Stephen-yd7ce 7 ай бұрын

Would have been nice to see your finished product at the door casing.

@ReluctantDIYers 7 ай бұрын

I’m so sorry that I let you down…

@drakeorion94 4 ай бұрын

I should have used pvc on my shoe molding. Doing this with wood shoe was a nightmare

@ReluctantDIYers 4 ай бұрын

👍🏼

@markgarland9000 7 ай бұрын

Quarter round or shoe..either one..looks better with the face side hand rounded into the base, greater at the floor to almost zero at the top.

@ReluctantDIYers 7 ай бұрын

👍🏼👍🏼

@peterjohnson617 5 ай бұрын

I would not allow that thing in my tool box and it just a slightly different cut but shoe moulding looks much nicer .

@ReluctantDIYers 5 ай бұрын

Thx for sharing!

@Billy-ye3ge 10 ай бұрын

Quarter round on base boards is getto! If your installing new VPF, pull and install new baseboards.

@ReluctantDIYers 10 ай бұрын

Thx for sharing

@MichaelHavens2318 9 ай бұрын

Ghetto? Lol, it actually makes it look better and offsets the floor more and actually makes the floor look like it's under the trim.

@ReluctantDIYers 9 ай бұрын

@@MichaelHavens2318 Agreed!!

@brentufkes6846 7 ай бұрын

Is it more ghetto than making up your own acronym for LVP?

@Billy-ye3ge 7 ай бұрын

@@MichaelHavens2318 Professionals install the floor under the trim.

@Whoknowsboutit Ай бұрын

I only do that to chair rail, I always 22.5 the end

@ReluctantDIYers Ай бұрын

👍🏼

@user-ry5cx5lf2q 2 ай бұрын

camphor is better than a return by far, done professionally

@ReluctantDIYers 2 ай бұрын

👍🏼👍🏼

@hondaxl250k0 11 ай бұрын

Great idea . Idk how anyone can stand painted trim over natural wood. Drives me nuts. Lol.

@ReluctantDIYers 11 ай бұрын

Thx for watching!

@brolsonmusic 7 ай бұрын

It's WAY easier to use a sander to quickly finish sand your edge to shape then cut and glue that sloppy mess! Also, use REAL wood, not that junk crap.

@ReluctantDIYers 7 ай бұрын

Thanks for the advice

@richardwojcik655 7 ай бұрын

😊

@ReluctantDIYers 7 ай бұрын

😁

@mrm14_88 6 ай бұрын

Come on man. Now all the Karen’s are going to tell the DIY Dads I TOLD YOU IT DIDN’T LOOK FINISHED.

@ReluctantDIYers 6 ай бұрын

BAAAAAHAHAHAHAHAHAAAA!!! Sorry man. 🤣🤣

@rickgreene913 7 ай бұрын

A better solution is to not use quarter round at all. Fit the baseboard or use a small flat stock that adds some interest to the base board. Nailing half a baseball bat to the floor is worse than any gap.

@ReluctantDIYers 7 ай бұрын

In ideal situations when you can reposition the baseboard, I totally agree. Thanks for sharing.

@Worldwidegiantgrowers 6 ай бұрын

Bass shoe is a better choice not quarter round. I think base shoe looks a lot better.

@ReluctantDIYers 6 ай бұрын

@@Worldwidegiantgrowers I agree! 👍🏼

@dazeyknows6736 2 ай бұрын

Every time I use the shears I crack the trim that I am cutting

@ReluctantDIYers 2 ай бұрын

That’s really odd. Is the blade on the shears sharp? I’ve never had the trim crack with these shears.

@bexaminer1 6 ай бұрын

You didn't mention who made the nails you used.

@ReluctantDIYers 6 ай бұрын

I’m so sorry… I use Metabo nails for my gun.

@user-bt5qt9pp4x 7 ай бұрын

In all honesty them shears are just not the right tool for the job. They work better for cutting rubber gaskets or PVC but they make choppy cuts on wood. When I started learning woodworking I would make cuts that weren't perfect and then cover them up with filler but within a year the expansion and contraction had caused most of the filled in mistakes to reveal themselves and the finish would look awful. My best advice to any beginner is to buy a tenon saw and a cheap plastic mitre box and practice on scrap first until you can do the cuts perfectly. Take your time, work in a well lit area, measure carefully and do the job right first time. You will need these very basic tools in your DIY adventures anyway so buy them and learn to use them first, avoid the urge to improvise.

@ReluctantDIYers 7 ай бұрын

Thanks for taking the time to share this!

@denisrhodes54 Жыл бұрын

i’ll add a similar tool to my shopping list for the local store

@ReluctantDIYers Жыл бұрын

Awesome! Thanks for watching Denis!

@chadbreton4951 6 ай бұрын

People, if you have a miter saw do not waste your money on these pliers. You can clearly see the poor quality of the joint in the video. If I see a KZfaq video i am not sure of, I check the comments so I can get a well rounded perspective. There are way too many DIY how to videos out there these days from people that want to teach what they just do not know

@ReluctantDIYers 6 ай бұрын

Thanks for the encouragement! Most beginners do not have a miter saw, which is why I used the shears in this video. 👍🏼

@chadashley1434 4 ай бұрын

I would suggest getting plastic quarter round, it's cheaper and the shears leave a nice cut

@ReluctantDIYers 4 ай бұрын

@@chadashley1434 Thanks for sharing this! 👍🏼👍🏼

@9929kingfish Жыл бұрын

the shears don't open wide enough to cut on the back flat side of the moulding against the fence.

@ReluctantDIYers Жыл бұрын

Correct. I flip my mounding around to make the cuts and it works really well.

@9929kingfish Жыл бұрын

@@ReluctantDIYers yeah, I'm not a fan of that. I don't think i get as accurate of a cut when resting the rounded side of molding to fence.

@ReluctantDIYers Жыл бұрын

@@9929kingfish totally get it… it doesn’t bother me but I can see how you might not like that. 👍

@9929kingfish Жыл бұрын

@@ReluctantDIYers Sadly I will return back to amazon and use the old fashion way with the miter saw. Thanks for your input

@ReluctantDIYers Жыл бұрын

@@9929kingfish No worries. Have a great day!

@Al-hf3iz 4 ай бұрын

You had a gap at one end with the floor not covered. The other way looks better and faster.

@ReluctantDIYers 4 ай бұрын

Thanks for sharing your thoughts! 👍🏼👍🏼

@aintmanyofusleft 6 ай бұрын

DUDE......OMG.... it's called a return and those plier type cutters are best used on plastic trailer moulding or for weighing down the bottom of your trash can. In 46yrs as a carpenter, I can say I have seen worse but not sure when, and it is quarter round a moulding with a whole different application, shoe moulding goes at the base of the base, it comes in several profiles, rounded and colonial are the two most common. quarter round is generally used to line "panels" to return the thicker outer frame to the thinner inner panel. People are already buying tools for diy, dont add to the mayhem. bet you would'nt remove your own gallbladder.

@ReluctantDIYers 6 ай бұрын

Ha! Thanks for sharing. I’ve used these miter shears very successfully for a long time on small projects so I don’t have to break out my saw. Just sharing what has worked for me countless times. 👍🏼👍🏼

@allrightman1 4 ай бұрын

Painters never,ever,sand the nail holes on shoe mound or baseboard.

@ReluctantDIYers 4 ай бұрын

Nope

@The.RyCo.Express 6 ай бұрын

I followed all the steps, and now my quarter round is a half inch short…

@ReluctantDIYers 6 ай бұрын

Ack! 😳 Sounds like that first cut might have been too far in.

@paisteplayer1040 7 ай бұрын

Its called a return.. Should have used a 18ga brad not a 16ga nailer.. Too big, the quarter round cracked

@ReluctantDIYers 7 ай бұрын

Thanks

@kennyharper4315 6 ай бұрын

Just cut a 15 °and be done

@ReluctantDIYers 6 ай бұрын

Ha! Yeah… I’m not a fan.

@mikenimmick3920 4 ай бұрын

Should be using base shoe...it looks a lot better than quarter round.

@ReluctantDIYers 4 ай бұрын

I don’t disagree, but so many homes are full of quarter round that it would be too expensive to replace it all with shoe.

@joegonzales772 7 ай бұрын

i dont like quarter round it looks unprofessional i use shoe molding

@ReluctantDIYers 7 ай бұрын

Thanks for sharing Joe! I think shoe looks great as well. A lot of older houses already have quarter round in place (like mine), so it's tough to replace it all at once to keep it uniform throughout.

@brentufkes6846 7 ай бұрын

So instead of looking unprofessional using quarter round, you use the kind of trim that looks the closest to it? It’s an aesthetic preference. Poor quality installation or not installing what the customer asked for is unprofessional. Insulting other peoples work for no reason is unprofessional. Send us a link to your shoe install so we can evaluate how professional it is.

@Hi.Im.Chucky 7 ай бұрын

Cant you just caulk it?

@ReluctantDIYers 7 ай бұрын

You can if you like that look and as long as the gap isn’t too large. It’s ultimately up to you. 👍🏼👍🏼

@chadvartanian9125 7 ай бұрын

So, you just cut a miter return. That’s it, that’s all you did.

@ReluctantDIYers 7 ай бұрын

You are correct!

@goaheadmakemyday9859 4 ай бұрын

This and every other kind of video are all marketing commercials "If you have "This" your life will be less challenging".

@ReluctantDIYers 4 ай бұрын

Thanks for your feedback! The purpose of this video was two-fold. First, show a nicer way to finish and install quarter round. Second, show a tool (that I was not paid to show) that can help you accomplish this at a fraction of the cost of a $400-$700 miter saw. Beginners do not have big expensive tools so this is why I showcased this process and tool. That’s my underlying mission behind all of my videos. Have a great day! 👍🏼

@bassfan41 7 ай бұрын

to me that looks more unfinished than just clipping the corner off

@ReluctantDIYers 7 ай бұрын

I guess it all comes down to personal preference. Thanks for sharing! 👍🏼

@goaheadmakemyday9859 4 ай бұрын

All these videos are pretty much commercials "If you are going to be doing this type of job then you will need this specific tool right here".

@ReluctantDIYers 4 ай бұрын

As I said in my last reply, my goal is to provide less expensive tools to get the job done without breaking the bank. 👍🏼

@billhamilton7524 7 ай бұрын

NO ,,,its all personal preference ,,I think it looks worse in almost every application, IMO,,especially if the casing is thicker than the base ,which you didn't show for obvious reasons ,,also just back cut back 30% not 45%,,nothing more irritating then someone pushing their preference as if its the only way over another ,,

@ReluctantDIYers 7 ай бұрын

I was simply showing one way to do it. 👍🏼

@billhamilton7524 7 ай бұрын

@@ReluctantDIYers 👍🤟

@harveypaxton1232 2 ай бұрын

Looks like a lack of planning which ends up looking like crap.

@ReluctantDIYers 2 ай бұрын

Wow, thanks!

@bilnitro 7 ай бұрын

Quarter round sticks out too far. Base shoe is made for that. The rest is good knowledge. Quarter round covers more, but looks like crap.

@ReluctantDIYers 7 ай бұрын

I guess it’s a matter of opinion. I think shoe looks better also.

@justjay3750 6 ай бұрын

better idea: scribe your baseboard properly and skip the ugly quarter round.

@ReluctantDIYers 6 ай бұрын

Another option also. 🤣🤣

@davidhjortnaes2000 4 ай бұрын

Not going to work when you have your wood stained and varnished. Never liked white baseboards.

@ReluctantDIYers 4 ай бұрын

Totally agreed on the stained wood. I would cut that before staining. 👍🏼👍🏼

@Mike-do2bp 7 ай бұрын

First of all it's not quarter round it is Base shoe1/2"x 3 /4"

@ReluctantDIYers 7 ай бұрын

Thanks

@silveryfoxx4791 4 ай бұрын

Don't use quarter round is my best advice.

@ReluctantDIYers 4 ай бұрын

I guess it depends on what you already have in your home.

@jspatz1 7 ай бұрын

Your giant nails spilt the quarter round wide open.

@ReluctantDIYers 7 ай бұрын

Actually, I haven’t had that issue.

@jspatz1 7 ай бұрын

@@ReluctantDIYers I wasn't speculating, you can see it in the video.

@ReluctantDIYers 7 ай бұрын

@@jspatz1 I’ll have to look. I’m just using basic finishing nails.

@donnafinocchiaro5836 3 ай бұрын

waste of time cut it flush or at a angle. that doesn't look much better and no way cutting small pieces on a mitre saw. you would have to have that tool which isn't to neat.

@ReluctantDIYers 3 ай бұрын

Thanks for sharing your opinion. 👍🏼

@bexaminer1 6 ай бұрын

Lol. Just kidding. I'm sure you're trying to be helpful as well as generate a little revenue, but I don't recall seeing that many suggestions for products.

@ReluctantDIYers 6 ай бұрын

🤣🤣🤣🤣🤣

@bruceganter8449 7 ай бұрын

Key: dont install that crap!!

@ReluctantDIYers 7 ай бұрын

What part?

@anthonytonzola1506 6 ай бұрын

Get better caulk

@ReluctantDIYers 6 ай бұрын

Ha! I love this stuff.

@JonDoe-cg4mr 4 ай бұрын

I despise quarter round. Do it right. It looks terrible

@ReluctantDIYers 4 ай бұрын

Thanks!

@user-pe2jc1hp4o 7 ай бұрын

Amateur looking returns

@ReluctantDIYers 7 ай бұрын

Thanks! 😳

@patriotatarms7208 7 ай бұрын

Mitre shears are worthless

@ReluctantDIYers 7 ай бұрын

I actually love mine… saves a ton of time when I don’t have to pull out the mitre saw for small projects.

@coreyfranco7060 5 ай бұрын

This looks like dog piss with 1/4 round or shoe and no matter what you call the returns. Put backband or a plynth, much better

@ReluctantDIYers 5 ай бұрын

Thx for the feedback

@rafars2246 6 ай бұрын

That looks terrible lol

@ReluctantDIYers 6 ай бұрын

Wow thanks. 😢

@DanRichter 3 ай бұрын

Why do you look so surprised, raising your eyebrows, for the entire duration of the video? Pretty distracting.

@ReluctantDIYers 3 ай бұрын

🤣🤣🤣 Do I really do that??

@MikeP2510 4 ай бұрын

Looks terrible lets be honest

@ReluctantDIYers 4 ай бұрын

Wow thanks 😳

@jeffreylonigro4081 8 ай бұрын

Why do inexperienced persons who apparently never spent a day in the trades make these videos? Shoe goes on the bottom of baseboard, not quarter round. If you didn’t know that, maybe you shouldn’t be teaching. And for goodness sake, it’s called a mitered return.

@ReluctantDIYers 8 ай бұрын

Thanks for the encouragement!

@jeffreylonigro4081 8 ай бұрын

Oh, that’s right…you’re part of the “everybody gets a trophy” generation who apparently seek praise even when spreading bad information to people who don’t know any better. If you go to the store and ask for quarter-round, you get quarter-round. Quarter-round isn’t for baseboards: shoe is for baseboards. And the thin side sits on the floor. You’re welcome.

@ReluctantDIYers 8 ай бұрын

@@jeffreylonigro4081 I hope you have a great day.

@jeffreylonigro4081 8 ай бұрын

@@ReluctantDIYers Thank you. I hope you have a wonderful day as well!

@ReluctantDIYers 8 ай бұрын

@@jeffreylonigro4081 👍🏼