No video
How to Install SM Project Axle Sliders on Husqvarna 701 Supermoto & KTM 690 SMCR
Рет қаралды 6,535
Күн бұрынThis how to, is a how to, on how to install the SM Project front and rear axle sliders!
I have only done this video as to me it wasn't exactly obvious on how to remove the old and fit the new adjuster block to the rear axle.
Purchased from SM Project.
Front - bit.ly/2U4q2WC
Rear - bit.ly/2u4egAL
Check out their other sexy parts and shineys!
www.sm-project...
Any questions, please drop a comment down below. :)
Just a heads up on cleaning also. Do not use any degreasing products (kitchen cleaner type stuff) or harsh alloy wheel cleaner on your bike! When left to soak they can and will strip the colour from any anodized parts on your bike, stock or aftermarket and sometimes even the chain!
Remember to hit like and subscribe! Thanks!
See more from me on my Insta!
/ twedymoto
@GONE_LIKE_JOHN 3 жыл бұрын
just fitted these myself that rear axle was a pain in the ass ended up using a blow torch to heat the thread lock up
@GONE_LIKE_JOHN 3 жыл бұрын
and i didnt have any bobbins to jack it up so used normal bolts in the swingarm to get the paddock stand on
@justinkase1360 3 жыл бұрын
I would like to buy these in black for my 2020 KTM XCF-W but there is so much confusion when it comes to axle sizes and what will fit that it's frustrating. There doesn't even seem to be agreement on what fits what. Sometimes even manufacturers list something different than retailers...
@elainehoodies 3 жыл бұрын
Hi mate what cotton reels do you use? I bought some standard ones but are flush at the back and don't fit i need a bit protruding and was wondering if the r&g ones will suit
@Twedymoto 3 жыл бұрын
The R&G ones are very popular. I use SM project sliders cos they're pretty. 😂
@SaulBarry 4 жыл бұрын
did you use medium or strong loctite?
@Twedymoto 4 жыл бұрын
Neither, and to be honest I've never used it! lol
@husky-7017 4 жыл бұрын
They look great mate.. whete did you get them from..👍👍
@Twedymoto 4 жыл бұрын
Cheers pal. they're from SM Project. Link in the description.
@brucefile7430 4 жыл бұрын
@@Twedymoto i recently spoke to my parts guy at the local shop regarding changing the gearing on my 701 SM to 15/45. He mentioned something about the possibility of the sprocket rubbing on the swingarm or something like that. Have you encountered anything like this? My parts guy said this might be too much of a change. As long as i still have enough on the top end to reach 100 mph + i feel like this would be a good setup for me. I think i remember you saying this setup would still reach 115 mph...
@Twedymoto 4 жыл бұрын
@@brucefile7430 I've had 115 before from 15/44. I have seen some instances of the chain rubbing through the swing arm slider but don't know what sprocket sizes were used. I'll check for you when I get home 👍
@brucefile7430 4 жыл бұрын
@@Twedymoto ok thanks! I appreciate all the info you always provide 👍
@Twedymoto 4 жыл бұрын
Just checked mine and there's no excessive wear on the swing arm slider. 👍
@listenheremeow2637 4 жыл бұрын
Front axle sliders the shaft is too short. The threads don't even contact the nylon portion of the locking nut.
@Twedymoto 4 жыл бұрын
Something clearly not right there! Have you contacted SM project? They'll see you right 👍
Twedymoto
Рет қаралды 23 М.
Bolzi
Рет қаралды 1,6 М.