How To Install the Delta® R4700 FLWS Floor Mount Tub Filler with Supply Stops
Рет қаралды 11,549
Күн бұрынFollow along as Mike walks through how to install the Delta® R4700-FLWS Floor Mount Tub Filler with Supply Stops Rough. (Note that the installation is slightly different if you're installing from underneath. Mike's installation features installation from the top.) See our supply list and video shortcuts below to make installing even easier.
You'll Need:
- Power Screwdriver
- 1/2" - 3/4" Screws
- Construction Screws
- Tape Measure
- Level
- Pencil
- Circular Saw/Jigsaw
- Safety Glasses
- Plumbing
Steps:
0:00 Intro
1:46 Determine Position
3:07 Install Stringer
5:05 Secure Rough Valve to Stringer
7:47 Final Checks
@sanjaysenva3232 2 жыл бұрын
Thanks for the information.
@jimnaroski7138 2 жыл бұрын
In your video, you state you are using PEX, but you appear to be using copper for the supply lines. Can you clarify?
@marcg7532 2 жыл бұрын
what is the reason for the subfloor lining up with the horizontal line on the plaster guard? is it purely for convenience when access may be needed after install? I want to install my stringer board as low as it can go under my subfloor so the top of my tub filler is as low as it can be into the tub. Thoughts?
QAZSPORT TV / ҚАЗСПОРТ TV
Рет қаралды 4,5 МЛН
Delta Faucet
Рет қаралды 97 М.
Delta Faucet
Рет қаралды 20 М.
Gerber Plumbing Fixtures
Рет қаралды 4,9 М.
D PLOMERIA Y MAS
Рет қаралды 3,9 М.
Bathroom Remodeling Teacher
Рет қаралды 7 М.
The Kelley's Country Life
Рет қаралды 703 М.
SmilingFace
Рет қаралды 8 МЛН