I like the idea of the mdf backboard. Todays top tip is, when terminating cables in a switch, socket, etc… don’t cut the earth cable at the same length as live & neutral. Leave the earth cable longer so that if, for any reason, the cable/flex is pulled out the earth cable is the last cable that loses connection. 👌

Absolutely great idea, I bought and connected the pendant to the wiring and fitted in a day. By the end of the week I have fitted loft boards on loft legs, now I have so much more usable storage space.

I think if it was me I would've taken a piece of flooring or timber up to lay across the joists, then you wouldn't have needed to balance on the joists. You could've also taken a sturdy toolbox to stand on too to give you the extra height so you don't need to re fix them higher later on. But other than that, yes it's a good idea. Thanks for sharing 👍

I've installed pendants in my loft too. I absolutely agree that these offer a big advantage if you happen to knock against them with your head, and modern LED bulbs don't feel too hot if you brush against them. It's a good approach if the slope of your pitch roof is shallow and you don't have much head room.

Thanks Stuart. I've just installed the same set up in my loft after seeing this. Brilliant idea for someone not comfortable enough with electrics to install a full socket

Glad even the best DIYers swears at some jobs lol. Looking forward to the boarding out and what ingenious cost effective ways you come up with to board over the insulation.

Just finished installing the same setup in my loft after being inspired by your video. It was pretty straightforward and works really well. Quite cheap to do too. Thanks for the video!

What a brilliant idea to do all of the fiddly stuff in the workshop! I can't recall the number of times I've struggled with wiring etc in the loft or in some inaccessible space.

Looking forward to your video on insulating and boarding out the loft. Mine already has the flooring, but everything is covered in dirt as the angled roof sections are just the original boards with the tiles on the outside. It’s a 1935 detached house, and I’ve been putting off doing this job for ages, partly due to the amount of ‘relics’ accumulated up there, over the years! One day I will have a good clear out, or so I keep promising ’she who must be obeyed’!

Attic lights make all the difference!! Great video. Thank you for sharing.

Thanks for the inspiration Stuart. I've just installed this in my loft today. Without your video I'd have probably made do with an inspection light on a hook. This is a much more useful solution 👍

Stuart, Thank you so much for this inspiration. I am visiting my parents in Ireland to help insulate their loft and put this setup together. All put together and tested in the workshop/living room. Working a treat. Plus I got to buy some new tools 🔧 ☺️

Top man, my son and I just finished putting the lights in. Thank you, great video.

When I did my attic I put some temporary loft boards down to enable me to use a small step ladder and provide safe places to stand. Once the wiring was complete I added the loft legs, insulation and boarded it out. Sometimes a temporary fix saves lots of time and improves safety and comfort. Glad you didn't put your foot through the roof and good money saving idea using pendants.

Another great video Stuart, refreshing to find someone who clearly plans it and delivers it in a professional manner

Thank you very much for the informative video. It's always good to see an effective workaround for some of the more 'daunting' jobs for the everyday DIYer.

Great channel with so many useful projects. Thank You!

This is what we planned to do originally, in fact we got as far as wiring in the first one then left it for 5 years! Lucky for us there was a socket right underneath the loft hatch so it took literally 2 seconds to plug it in. In the end, since we had a few 5m LED tape strips left over from another project we ended up just putting them up along the ridge board, which gives a bright, even light across the whole loft!

Excellent job. I'm looking forward to you boarding out your loft.

looking forward to you doing the flooring and storage as this is a job waiting for me but not confident without good guidance , from yourself of course regards

I still have engine bay inspection lamps clamped to my rafters, works great, but always meant to be a temporary solution. Move on 10 years and still doing a great job.

You can now get LED battens in various sizes e.g. 5ft length, which have the advantage of not using so much headroom and starting much better in cold weather compared to older fluorescents.

Another great video and a great idea. This is a job I need to do and you make it look so doable…… Also it was great to meet you this week. Keep up the great work!

Another masterful touch with the audio when you take the ear protectors off around 8:29 - Spielberg-level work!

Great video Stuart nice easy job for the DIY person… I replaced my old strip lights last year with LED batons really bright now 👍👍👍👍

Brilliant idea ! This is in my opinion the best instructive DIY channel on KZfaq!!

I will never forget a friend of mine yesrs ago who clipped a whole load of cables along the length of his loft only to find when he had finished that he had also clipped his tail light cable in with them LOL. As far as I know the tail light is still in the loft. Nice video, think I will do the same when I come to board my loft.

Making the world better one job at a time👍🏾

really enjoy your videos, properly informative and instructive and you are wonderfully engaging and interesting. Greatly admire your work. thank you sir! x

Great job, and good idea to do the work ahead of the install. 👍👍

Great tutorial once again!

From experience working in the loft, always take a small grandchild up with you when attempting this. Not as you may think to sit on your shoulders to use the drill and hammer to fix the lights and cables you are struggling to reach. But for their useful questions like; “Grandad why did Sue say be careful not to fall through the ceiling” etc. It’s a great job. Fortunately my son in law is an electrician, so did this job for me. Its a very neat solution you have come up with and good advice not to cut into cables that you think you have traced correctly as a light circuit. Will be interested to see how you do the boarding and storage and update the insulation, especially around the hatch. With ours as soon as the lights were installed I could see a large gap around the hatch when switched on.

great idea

Thanks for this video, I’ve just installed my own this weekend after being inspired by this video. Instead of a junction box, I opted to use Wago connectors which are super simple to fit. Loved the idea of MDF backing, so did something similar with some spare off cuts of timber. Keep up the great content. Thanks

Looking forward to seeing the loft board project next!

Love you stuff Stuart - some great tips, so many thanks. But why didn't you show us a fully wired up bulb? After all the detail of what could be done, there was too little detail about what was done.

Great video thanks. I have a similar setup with just one bulb, so I am going to do this soon. Just a thought I wonder if showing us a final picture of how you wired the rose after explaining how you had to alter the wires. This might help others watching. ?? 👍

Another great video. Thanks Stuart - keep up the great work 👍🏻

For those with a socket in the loft and the socket isn't in an easily accessible location to the loft hatch then you could quite easily add a pull cord switch to the junction box with some additional flex. The wiring is slightly different, but trivial once you look up a diagram. You'll also need two of the pieces of brown insulation to signify the switched live conductor in the junction box and in the pull cord. You can then leave the plug plugged in.

Greetings again from South Africa, once again we are in the dark here, load shedding, thanks for this one Stuart, you take care up in that loft….

Thanks Stuart, I will be installing that in the new year.

I finished this project last weekend. They work well and look great. Will you be doing other loft videos? I need to board my loft but I'll hold off of you're going to do a video on the subject. Thanks for the great content

Although this may be a simple cheap and cheerful DIY job I always thought it’s better to run loft lighting from a socket circuit fused down as if you are working on the lighting circuit and it’s isolated there will be no power in the loft so you have to mess around with additional lamps and torches. I’ve done this before and it works a treat but now I’ve spurred it off one of the sockets on the landing and put in a fused switched connection unit with 5amp fuse in it so that you don’t have to spend more time plugging it in etc. I have my fuse spur mounted on the side by the hatch and it works really well! Nothing wrong with your work at all matey and a good video for anyone who’s wanting to just get a quick lighting job done up the loft! 👍🏻

I use you as an excuse, when my wife ask me to do a diy job around the house, I tell her “ yes I’ll do that as soon as PD shows me how to do it I know what to do” 🥴

Great job as usual. Have a great weekend 👍😃

Living up to your channel name as usual mate 👏 another thorough and precise video 👍 very enLIGHTening 😆👍

you made it so easy and simple

Great advice. Thank you

A shot of the final wiring in the light fitting would have been nice

Very good and informative video, well thought out. I'd be buggering about in the loft.

Yes I’ve done exactly the same. Well done.

Great job. I know how important it is to get lighting up in the loft.

Fabulous video ...gets me inspired

Nice job 👍

Very good video Sir to give an idea you can make another video teaching how to install an outlet in the attic for that purpose appreciate sharing your knowledge

Great job thanks for sharing 👍

Great idea. Thanks

Thats a prime space for a full loft conversion. Would make an awesome vid

THANK YOU!

Splendid video... Pretty sure I wouldn't be hammering in cable clips onto powered up cable!

This is a brilliant idea being able to make it up and just plug it in. When will you be doing the attic storage video?

Wow ..that is a good idea ..

Another enjoyable episode Stuart, most enlightening. Ever thought of installing an off-grid style solar & wind unit with a electric generator to use and store some free wattage?

Hi great video as usual. Tip from Skill Builder with the loft hatch adjust it so the treads have a bit of a gap from the hatch so its more comfortable climbing up the ladder with space for your boots to go. In future you could run the cable down to the consumer unit and pay a leckie to connect the lights up. My loft came with a 12 inch plank running lengthwise on the joists for a walkway.

Great video. I’d like to do something like this but didn’t really understand the initial rose wiring.

I used a 5M led strip light all the way along, easy and cheap and good light spread. Had to run a cable to both ends to avoid voltage drop along the length of the LED.

Tip: mount lights on alternate sides for a slightly more even overall illumination😁 I have one light up there…I might take your approach and fit it out properly!

Would love to see a video on how to fit loft insulation to go along with this

A couple of LED floods work really well. Same wiring method if you want to do it that way

First time I've seen you get at all flustered! :)

Excellent video just what I was looking for. Can you do a video showing how to put sockets in the loft. I want to build a railway up there. Thanks

Brilliant !!!

Take a feed from a bedroom ceiling light, the power is already in your loft. And just put a switch near to the loft hatch. A lot easier than having to plug it in every time you want to use it..

@13:10 I get this. Which is why I have been slowly but surely flooring my attic with runs of sub floor or with 'lily pad(s)'

Cracking video. FYI your Keylite loft ladder is not properly adjusted. The 4 brackets held in with hex key need extending which gives you more toe room on the treads where it joins the hatch

Very neat.

Hi keep the videos coming I really enjoy what you're doing. My friend is fitting wall lights for me an would like them using flex cable with a 13 amp plug. What cable did you use when fitted you're loft lighting an wwre did get it. Can you send A link or just say the wire code... thanks Again keep them videos coming you're doing a great job Robbie

I find that a 4 ft by 2ft 3/4" sheet of ply ideal in the loft as you can easily move it to where you are working. A small home made hop up provides for extra height.

NOOICE!! Too Good!

Good job. I'm thinking of doing something similar but I might use twin and earth cable for the section that is fixed up in the attic to have the option to get it connected into the lighting circuit at some stage in the future. Flex definitely makes more sense for the part that goes to the plug and no point in oversizing that if using a 5 amp fuse. Are you planning to have a raised the floor on loft stilts?

Brilliant. Great job for entry into diy electrics. I will definitely be doing this. Thank you. Do you have a "suggestions box" for future ideas because I often run into things I can't find on youtube. Cheers

Please do a video on boarding your loft!

I had really hoped you had something on your channel for how to deal with the walking on the attic. Now you have the lights, but you are still walking on the studs. Easy cheap walkway please? :D

Quality, thank you.

Congratulations to exactly 100000 subscribers

I like the pre assembled light in string. plus the trailing lead means that you don't forget to switch the lights off! That reminds me I need to fit an indicator light to my installation, any bright ideas that don't involve cutting a ceiling mounted neon or led into the circuit?

very enlightening.

Nice video, they look like they will do for Christmas!!

Hi, what a great idea and would love to do this,any chance you could show a bit more detail on how you wired the ceiling rose up and so on. You closed it to soon 😆.

What an excellent video with great ideas (socket power, daisy chain, mdf backing) and very straightforward explanation of the loadings and fuses etc. Thanks!! PS Love the loft ladder - home made?

Used a pir on my set up just above the hatch , on when you open and off when you leave….😉

I’m going to do the same after watching this inspiring idea , however I’m going to connect a switch rather than use an extension cable to a socket in a room below the loft!

great videos as ever. what is the make of the loft ladder you use?

1 guess as to what your next job in the loft will be :) Great video as always Stuart!

Hey PD sorry I'm late I've been busy in the garden before the weather gets worse 🙃. There is something about seeing/hearing a usually composed person loose their cool and speak French 🤣. Also I'm observant not nit picking......your loft ladder.....the section attached to the door hatch needs adjustment so you can safely put your feet on the rungs. If you look at the two plates either side that have the slots in, you need to loosen the bolts slightly and pull the ladder away from the door/hatch then tighten them again in the captive position. If you don't understand what i mean please take a look at one skill builders latest videos about the keylight loft ladder installation. All the best 👍🏼

Could you have taken a small board up into the loft to stand on (it would span several joists and much easier to balance on)?

I'm looking forward to more videos on loft insulation and boarding, especially the hatch door. I can't find any good videos on how to insulate the door with the equivalent of 17cm of wool that is compatible with having a ladder too... I would appreciate advice on a few options maybe?

Just a thought. If you will be moving them to a final higher position as soon as you have laid more insulation and boarded, surely a lower very light fitting with one screw and no cable clips would reduce the strain and danger of overreaching! Oh, and can we see how the pendants are actually wired in their finished state. Cheers

Whats that drill bit attachment that is being used? looks really useful

What i did was keep the old light fittings every time i upgraded so its very interesting with all the old style lights not cost a penny