No video
How to install TST LED Pod Turn Signals & Relay on a KTM 690 SMC-R / Enduro by TST Industries
Рет қаралды 17,345
Күн бұрынUpgrade your 2019+ KTM 690 SMC-R / Enduro front turn signals to bright LED units from TST Industries.
Get LED Turn Signals here: bit.ly/2z3Pymq
Make sure to subscribe here: bit.ly/1jq2ZrN
Follow us on Facebook here: on. 1nuTjlF
Follow us on Instagram here: / tstindustries
Follow us on Twitter here: / tstindustries
Upgrade your KTM 690 SMC-R / Enduro front turn signals with bright LED pod signals from TST Industries. Our turn signal options fit within the empty signal bracket left behind by removing the OEM turn signals. The included wire harness converters ensure a plug and play installation, ensuring you spend more time on two wheels and not cutting or splicing wires. With three turn signal design available, you can choose the signal design that fits your style and improves the looks and safety of your KTM 690 SMC-R / Enduro.
@alexanderc198 2 жыл бұрын
Will the front plug n play turn signal connectors work for the rear
@ROBSOLUTELY 2 жыл бұрын
I just purchased a KTM Duke 200. I would like to put BL6 LEDs on the front and rear. What part numbers do you recommend I purchase on your website? I know the part number for the BL6 lights, but I would like to know other connectors and relay that you recommend I purchase to go along with them. Thank you!
@Canuck_213 3 жыл бұрын
Integrated tail light for 21 smc 690. No stock???? When will they b available?
@dumindacp 4 жыл бұрын
Lovely KTM I like the duke690
@TSTindustries 4 жыл бұрын
Good choice
@DaTBoY1098 Жыл бұрын
Would this fit on a gasgas sm 700 ?
@TSTindustries Жыл бұрын
We have not had one in the shop yet. By all reviews we have seen the bike is pretty much identical to the KTM model, but I can't hang my hat on it. Where are you located? Are you local to Lake Helen, FL? If you bring us the bike for verification I will give you the parts for free. The signal lamps themselves will most likely fit because they are universal. I just don't know about the connectors and relay.
@mutinous1000 2 жыл бұрын
Is there a separate relay for the rear turn signals? If I replace my rear turn signals only, do I just replace the relay in the front to readjust the turn signal rate?
@TSTindustries 2 жыл бұрын
It is just one relay for front and rear.
@cpr336 3 жыл бұрын
Would that harness converter and relay work for 2020 duke 200....hard to tell from video or web site if it looks the same
@TSTindustries 3 жыл бұрын
In the product page on our website we have a photo closeup of our harness converter connector as well as the corresponding receiving connector on the bike side. There should be no ambiguity once you take a look at that photo on our website. If your connector look like what we have pictured then you are good to go. If they do not look the same then they aren't compatible.
@rubberskilla2991 4 жыл бұрын
Dudeeee still waiting on the SD1290R tail light! I need one!
@TSTindustries 4 жыл бұрын
We are not likely to make one for that bike.
@rubberskilla2991 4 жыл бұрын
@@TSTindustries i know you have told me that before. I really think you should tho. Theres only one aftermarket brand for my bike and its chrome compared to the smoked stock one. The stock ones a known to snap at the mounting place. Mine did at 2000 miles so now i just have it zip tied on😕 i refuse to buy the chrome one tho.
@pepe_valaz 2 ай бұрын
My front signal wires are red brown and blue. How do I wire them?
@TSTindustries 2 ай бұрын
If you are referring to our Mech-EVO signals or our Quadrix signals, the wiring breakdown is below. • Red - Ground • Blue - Running • Brown - Signal
@pepe_valaz 2 ай бұрын
@TSTindustries Sorry yes the Mech-Evo signals. So wire brown to black Blue to yellow?
@pepe_valaz 2 ай бұрын
Does anything else need to be purchased for them to work?
@TSTindustries 2 ай бұрын
@@pepe_valaz you shouldn't need any additional parts. If you purchased our harness converters along with the Mech-EVO lamps then the wiring scheme is lamp-red to harness-black, lamp-brown to harness-yellow. The blue will remain not connected unless you get the running light connection kit and are willing to install that to a switched/fused 12v supply (like head lamp circuit). In the future please consider contacting our cuustomer service department through pur website for timely help. Our KZfaq staff does not typically do support.
@mariusfallan7478 3 жыл бұрын
Where did u buy the lights, and the connectors? Need it for my ktm 690 smc r 2015
@TSTindustries 3 жыл бұрын
Dude...i don't know how this wasn't apparent from my intro. This is a video installation instruction for products we manufacture and sell at TST Industries. The link is in the declscription of the video.
@valenting6157 3 жыл бұрын
great vid ! do you know where is the relay on the Duke 690 ? mine is from 2018 and i cannot find it
@TSTindustries 3 жыл бұрын
On the Duke 690 it should be up above the front wheel somewhere around the headlight.
@ricardoosornio4558 2 жыл бұрын
Lo encontraste ya amigo? Yo aun no lo encuentro
@markbcn4000 3 жыл бұрын
Great vid! Would these fit a 2017 Duke 690?
@TSTindustries 3 жыл бұрын
They should fit nbo problem. Please just verify you have the same connectors on your signals as are shown on this bike.
@markbcn4000 3 жыл бұрын
@@TSTindustries Ok, will do. Thanks!
@shakir4671 2 жыл бұрын
is the relay compatible with all ktm model? duke 200?
@TSTindustries 2 жыл бұрын
No, but our RLYG2 model is.
@shakir4671 2 жыл бұрын
@@TSTindustries where can i get it? any videos about it?
@richardjustice1228 3 жыл бұрын
Any chance of you guys doing parts for the Husqvarna 701 Supermoto?
@TSTindustries 3 жыл бұрын
If we get one in-house, absolutely.
@achikuda 2 жыл бұрын
essentially it is the same one
@keegantrunick4123 Жыл бұрын
According to the review comment on the TST website, these signals worked just fine on a customer's '22 Husqvarna 701. Said "plug and play." The flasher relay too.
@Billybigballs 4 жыл бұрын
Will these fit the 2011 ktm 690 enduro r????
@TSTindustries 4 жыл бұрын
Most likely. We have not had that bike int he shop yet but KTM has used the same connectors on all these bikes for a long time. The stud for the signal should fit too without a problem.
@Billybigballs 4 жыл бұрын
@@TSTindustries excellent thanks for the reply, also do you sell the relay / flasher unit separately? Tia
@likkitongue Жыл бұрын
I seriously lost a little bit of respect for you guys after seeing you fudging that 2 pin connector into your 3 pin STYLE relay. You know what Im talking about. I WAS considering purchasing from you.
@TSTindustries Жыл бұрын
That's cool. We can't just whip up an entire relay, with a dedicated connector on it, the molding tool that makes the connector, etc in two days. That bike was in the shop for only a few days. We came out with a relay that fits that socket two months later
@likkitongue Жыл бұрын
@@TSTindustries Ah understood. I found it on your website, I see there are 2 versions.
@nigelwolfe6150 3 жыл бұрын
As the body parts and configuration IS significantly doffernt from smc vs enduro it SUCKS anyone making it appear otherwise.....THUMBS DOWN...do SEPERATE videos!
@TSTindustries 3 жыл бұрын
If we get the chance to get the other model in, sure. We rely heavily on local riders to lend us bikes so getting them isn't as simple as it may seem.
TSTindustries
Рет қаралды 20 М.
TorqueMasters
Рет қаралды 118 М.
Rottweiler Performance
Рет қаралды 62 М.
KTM Owner
Рет қаралды 2,3 М.
16 MEDIA Andre Ullmann
Рет қаралды 26 М.