How to install Ultimate Headers Low Profile Band Clamps, Pontiac Re-Build part 12
Рет қаралды 6,790
Күн бұрынTime to fix my exhaust header connection, and add proper low profile swivel ball joints, from @Ultimate Headers. We're on the tail end of my engine rebuild, and I need to fix the exhaust before re-installing it. If you missed it, check out the engine tear down episode... the bearings were toast! In this episode, "How to install Ultimate Headers Low Profile Band Clamps, Pontiac Re-Build part 12", we just installed the new Dual Disc from RAM Clutches, but I noticed my header to X pipe connection needs some serious help. Thanks to Ultimate Headers, they have the solution! These things also pivot 15 degrees! Follow along with the Pontiac 400 (Now a 470) engine installation, by subscribing below;
Subscribe by clicking this link; kzfaq.info?sub_conf...
This channel is all about muscle car how to's and what to watch out for, when working on your own car. Also fresh off of installing a New TREMEC TKX from Silver Sport Transmissions, and a FiTech fuel injection system. Subscribe to watch more projects on this built, not bought, 1969 Pontiac GTO.
Tremec TKX vs. TKO review, install, and test drive;
• Tremec TKX vs TKO, Tes...
NEW! FMG MERCHANDISE available! Here's the online store for shirts (pick a color), and face masks, (Grey, Black, or Red) fmgmerch.threadless.com/
Part's and/or supplies used in this video series;
Ultimate Headers, Extreme Low Profile Band Clamps
ultimateheaders.com/2018/01/31...
RAM Dual Disc, Concept 10.5 info;
ramclutches.com/ram-concept-1...
VHT High Temp Engine Enamel Primer
www.amazon.com/VHT-SP148-Engi...
1966-70 Pontiac all V8 Engine Metallic Blue Paint
www.inlinetube.com/products/i...
Swag Offroad Portaband vice conversion;
www.swagoffroad.com/SWAG-Port...
Butler Performance Tomahawk Valley pan for Roller Lifters;
butlerperformance.com/i-24453...
M/E Wagner Dual Flow Adjustable PCV
mewagner.com/
Butler Performance Pro Oil pump, 80 lb. and 60lb. available.
butlerperformance.com/i-24452...
Tomahawk Windage Tray
butlerperformance.com/i-24453...
Bench Top Ring Filer;
butlerperformance.com/i-31617...
Ring Compressor tool;
www.summitracing.com/parts/sm...
Custom Ross Racing Butler Performance, co-designed pistons;
butlerperformance.com/i-31643...
Plastigage
www.summitracing.com/parts/cl...
B.O.P. Engineering One Piece Main Seal;
butlerperformance.com/i-24452...
Here's the latest Walk Around of the GTO, filmed by RestoMods.com • A Walk Around of my "B...
Playlists of interest;
Hydraulic Clutch and Tremec TKO/TKX install;
kzfaq.info?list...
FiTech Fuel Injection Install;
kzfaq.info?list...
Here's the original Hydraulic Roller Lifter Fail Inspection, and process:
• Something is still WRO...
Here's the Official Part 1, where Mike starts the preparation of Engine removal
• Pontiac V8 Camshaft Re...
Here's the start of the TREMEC installation, • How to install a Wilwo...
#GarageBuilt #Pontiac #DIY
@hipoman8087 7 ай бұрын
Use a hose clamp as a guide to use a saws all if you don’t have a band saw like me. Converting craftsman band saw to metal. Doing my cars from scratch so pipes will be easy on length. Great video again. Never saw that type before. Thanks again. Love the layman instructions. I can actually understand them. Lol Adaptation is the name of the game.
@FastMonty 7 ай бұрын
Thanks Brother! Love the hose clamp idea!
@hipoman8087 7 ай бұрын
@@FastMonty have used it. Do like you did setting it up then hose clamp like you did tape. Going to order those exhaust connectors. Getting ready to order headmen full length headers for the impala and Chevelle. Don’t like how the mid length worked on passenger side. Will cut those flanges off and weld these on. So I should contact them for the downsize 3 to 2.5?
@FastMonty 7 ай бұрын
Awesome! And Correct, need to call them to get the correct pieces, as they're not online. Keep us posted! @@hipoman8087
@SidewaysTA 3 жыл бұрын
Pee Wee's Playhouse, Mike. Hey nice exhaust, those new clamps are super clean!
@FastMonty 3 жыл бұрын
Yeah, Brother... that was a disturbing show, wasn't it? ha, ha... yeah, I love these connectors, actually can't wait to pull my exhaust again. Thanks for the comment!
@65chevelleboys91 3 жыл бұрын
Great tips Sir as always keep them coming stay safe
@FastMonty 3 жыл бұрын
Thanks, you do the same!
@RestorationObsession 3 жыл бұрын
That looks like a handy gadget. It's cool that it comes with the O2 sensor fitting, too.
@FastMonty 3 жыл бұрын
Totally! The O2 bung is optional too... so cool!
@RestorationObsession 3 жыл бұрын
In a Butthead voice: "Heheh, he said BUNG! Heheh" ;)
@FastMonty 3 жыл бұрын
@@RestorationObsession Thanks Beavis! ha, ha...
@pontiacontap 3 жыл бұрын
Hmm, I need a set of these! I can't get my bird on my lift without long ramps because my header flanges contact the lower rung of the lift. Thanks for showing these off!
@FastMonty 3 жыл бұрын
You're welcome! Yeah, you're gonna love not bangin those flanges anymore... ha, ha... Thanks for the comment!
@mikeburnett7028 3 жыл бұрын
You can get different thickness rubber mounts for the crossmember if you just need to raise the trans
@FastMonty 3 жыл бұрын
Yup, next episode is an eye opener... for the amount of room I can gain with the TKX, it's crazy. Thanks!
@anthonynoland2593 3 жыл бұрын
Hey mike this is anthony from the pontiac car show with the blue firebird h.o next to brandon i remembered your youtube channel and checked out your videos on the engine rebuild and wat a huge difference it looks wen you added color to it ibstead of all chrome now it inspired me to tear apart my engine and redue it thanks for the inspiration and the time you take out on explaining everything oh yea at the pontiac car show a few weeks ago they were doing awards and you won an award but left before i could tell you
@FastMonty 3 жыл бұрын
Hey Anthony... thanks, yeah, I was over chromed. ha, ha... I wish I could've stayed for the awards, but I looked at my google maps, and it said traffic to get home was over 3 hours! And, it was... but, I made it. Great meeting you, and see you next time!
@anthonynoland2593 3 жыл бұрын
@@FastMonty definatley keep me updated when you go to the next show love to hang out with you had a blast at least you have power steering and ac unlike mine lol
@FastMonty 3 жыл бұрын
@@anthonynoland2593 Will do my best! I've vowed to never do a Saturday show up in LA ever again... 3.5 hours driving home was zero fun. ha, ha... And didn't run the A/C for the fear of overheating in bumper to bumper traffic. The bright side is I think I lost 5 pounds in sweat. See ya!
@anthonynoland2593 3 жыл бұрын
@@FastMonty lmao thats insane and i actually live in san bernardino county redlands to be exact heres my number hit me up anytime 9092469577
@Slingudwig 2 жыл бұрын
Great video MR Monty. I’ll check with the muffler shop about using these 👍
@FastMonty 2 жыл бұрын
Yeah, they're awesome. Let us know how it goes!
@Slingudwig 2 жыл бұрын
@@FastMonty Ok, got the V-Bands installed yesterday. Didn’t realize how much of a leak I had with the stainless steel bands. I love these V bands
@FastMonty 2 жыл бұрын
@@Slingudwig Awesome to hear! Yeah, Makes it super easy to remove too. Enjoy!
@Rick-O-Shay60 3 жыл бұрын
AT-A-BOY MIKE!
@FastMonty 2 жыл бұрын
Thanks Rickey! I love em!
@kaljam2 2 жыл бұрын
What TIG welder do you use and do you like it?
@FastMonty 2 жыл бұрын
Good question Bill... it's a Miller Diversion 165, with a pro torch conversion, and foot pedal from arc-zone.com Unfortunately, I don't think Miller makes it anymore? But, I do love it!
@mitsuturbo 4 ай бұрын
What band saw are you using?
@FastMonty 4 ай бұрын
I have a Dewalt Pipe Cutter. Head over to www.swagoffroad.com/collections/swag-portaband-tables-accessories Then you can get any version, Dewalt, Milwaukee, etc... then, hang it on the wall. Have fun!
@rohrt1 3 жыл бұрын
Why does the O2 need to be 15deg?
@FastMonty 3 жыл бұрын
Good question... it's so moisture doesn't collect in it, and prematurely oxidize it. :) You could go vertical, if you wanted, but it probably won't fit.. ha, ha... thanks for the comment.
@mikeburnett7028 3 жыл бұрын
Did you use any filler rod when welding?
@FastMonty 3 жыл бұрын
Yes, sir. But, don't have to when tacking.
@isidrosevier1125 Жыл бұрын
How well did these work , did you have any leaks with these?
@FastMonty Жыл бұрын
They work great! No leaks!
@isidrosevier1125 Жыл бұрын
@@FastMonty awesome I just got some can't wait to put them on. Thank you
@FastMonty Жыл бұрын
@@isidrosevier1125 Saaaweeeet! Can't wait to hear how happy you are, after install.
@FastMonty 2 жыл бұрын
Be sure to subscribe for more, click here; kzfaq.info Then get your FMG hat here; three color combos www.etsy.com/shop/fastmontysgarage
@craiguhlenkott392 3 жыл бұрын
his next stor
@FastMonty 3 жыл бұрын
And here all week... ha, ha... Thanks Craig
Fast Monty's Garage
Рет қаралды 3,3 М.
Fast Monty's Garage
Рет қаралды 117 М.
Khabar SPORT
Рет қаралды 370 М.
BleepinJeep
Рет қаралды 110 М.
How To Get them TIGHTER & Prevent Exhaust Wrap from Unravelling! Stainless Steel Zip Tie Tech Tip 32
Fast Rust
Рет қаралды 159 М.
Fast Monty's Garage
Рет қаралды 116 М.
Gold's Garage
Рет қаралды 8 М.
тюбик
Рет қаралды 3,9 МЛН
Гаражанин
Рет қаралды 427 М.