How To Correctly Wrap Your Exhaust!

Рет қаралды 230,065

4 жыл бұрын

Some people asked how to wrap your exhaust components and because I needed to do it for the BRZ's Over Pipe I figured it was a good chance to show everyone! This technique will work on any exhaust manifold or Exhaust components that you need to wrap. I HIGHLY SUGGEST USING THE COATING SPRAy OR YOUR PIPES WILL CORRODE!
Smeedia Merch: teespring.com/stores/smeedias...
DEI Heat Wrap (Titanium): amzn.to/3aBghVp
DEI Spray Coating: amzn.to/2wa95R2
Wire: amzn.to/2UTy9UF
Wire Pilar: amzn.to/340RJCH
Tomei Over Pipe: amzn.to/3aNa2xT
sunrise - Rexlambo / rexlambo
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/sunrise-rexlambo
Music promoted by Audio Library • sunrise - Rexlambo (No...
Shadows by David Cutter Music davidcuttermusic.com
/ dcuttermusic
Free Download / Stream: bit.ly/shadows-david-cutter
Music promoted by Audio Library • Shadows - David Cutter...
Track: Space Lullaby (feat. Clara Sorace) - Iaio [Audio Library Release]
Music provided by Audio Library Plus
Watch: • Space Lullaby (feat. C...
Free Download / Stream: alplus.io/space-lullaby
Track: Jumping of the Porch - Broke In Summer [Audio Library Release]
Music provided by Audio Library Plus
Watch: • Jumping of the Porch ...
Free Download / Stream: alplus.io/jumping-porch

Пікірлер: 398

@LAHover 3 жыл бұрын

"How To" video starts at 3:50

@KalGoltur 3 жыл бұрын

I saw this 4 minutes to late

@alexanderrotar4797 3 жыл бұрын

@@KalGoltur same lmao \

@mynameisgoodspeed 3 жыл бұрын

This is the hero this video needs!

@KineticLatency 3 жыл бұрын

Thanks!

@tcfalcon2000 3 жыл бұрын

Thank you.

@philbertlovely7724 3 жыл бұрын

This video is a good foundation for those that haven't wrapped exhaust. However, titanium wraps don't need to be soaked and expanded to be applied - they can be wrapped dry. Additionally, titanium wraps require 4-5 very light coats since the silicone won't absorb as well as fiberglass. I'm stressing this again due to the fact that between every coat with titanium wraps, you must heat-cure it at 400-425 degrees Fahrenheit between 1.5-2 hours. The heat-curing process will prevent any moisture from seeping in.

@lukasethan6429 2 жыл бұрын

Thanks for the additional tip I appreciate it

@Mason-hs9oz Жыл бұрын

Thank you

@3RAN7ON Жыл бұрын

The instructions that come with the titanium wrap say to soak it first...

@tex9280 7 ай бұрын

@@3RAN7ON I'm holding the package in my hands.... & Nowhere does it mention soaking wetting or anything to do with water...

@Mastermindyoung14 2 ай бұрын

@@3RAN7ON what a strange thing to lie about. Unless my own eyes deceive me, you are incorrect.

@depperson1900 2 жыл бұрын

Awesome man! Thanks for the video. Super helpful and. Good info. I appreciate you.

@93ChayZ 3 жыл бұрын

So glad to see your channel taking off, i been watching ur vids since the channel was a wee whipped snapper 🤓 Im here because i need to wrap the down pipe for my B9 S4 😀

@Smeedia 3 жыл бұрын

Eyyyy always appreciate the support, been seeing a lot of S4s recently. 😍

@cassiejvance7496 4 жыл бұрын

Glad you are feeling better my friend and thank you for another great video, congrats on the 12K.Onward and up 🤘🤘🤘🤘🤘

@Smeedia 4 жыл бұрын

Thank you! Excited to keep things going and keep pushing onward 😁

@thebeardedlifestyle5563 4 жыл бұрын

Great video man, exactly the info I was looking for

@Smeedia 4 жыл бұрын

Glad the video helped 🙌😁

@shaunchristensen4386 4 жыл бұрын

Another awesome video!!! It always makes my day when I watch your videos!! I have learned a lot from your channel!! I am going to do a few modifications to my Civic TypeR and it’s cool to be show how to do certain things!! Keep up the incredible work and I am glad you are feeling better!!!! 🔥🚙

@Smeedia 4 жыл бұрын

Appreciate the support and also glad to be feeling better! I need to drive a type R soon, I keep hearing good things about them!

@shaunchristensen4386 4 жыл бұрын

I have really enjoyed my Type R!! I have always loved Subaru the wrx, Wrx Sti and have rode in one but have never driven any newer Subaru!! They would definitely be a car I would love too!! Keep up great great work!!🚙🚙

@KeeleDesign 3 жыл бұрын

If u read the directions, It’ll tell u to paint the exhaust prior to wrapping and let fully cure. Then wrap and no water will ever eat away at the metal

@nickonickster1 3 жыл бұрын

Yup, moisture will make its way in and slowly eat the metal if not painted first

@egnah2 3 жыл бұрын

You can tell he isn't about to read no stinking directions... I think between the first can of paint he huffed and god knows how many power drinks he wouldn't listen to the manufacturer if he was standing there. Bad advice video...

@Smeedia 3 жыл бұрын

Dude literally all of the rebull

@marshallwarren9947 2 жыл бұрын

Very informative. Thank you!

@nasimwehbe8410 3 жыл бұрын

Just wrapped my headers last night with the Titanium wrap. No need to wet it since it is not made from fiberglass and it is extremely flexible and stretches easily. Other than that, great job.

@Smeedia 3 жыл бұрын

Wetting it is just something yhats worked a little better for me in thr past. I believe DEI suggests doing it dry. 🙏

@nasimwehbe8410 3 жыл бұрын

@@Smeedia just found your channel by the way. Full of great info and great content. Keep it up.

@Smeedia 3 жыл бұрын

Thank you! 🙏😁

@urielcastorena6094 3 жыл бұрын

I wrapped my headers but didn't have enough space to wrap the beginning so i wrapped all of them together and the ending of the headers i wraped them individually would it perform the same?

@daverettberg966 4 жыл бұрын

Soooooooo happy you're going with the fp black. I was thinking of doing 1 as well 🤟

@giovannimateo-ramos1406 4 жыл бұрын

I’m glad you’re good bro ! Stay safe out there 🦾🤙🏽

@Smeedia 4 жыл бұрын

Thank you and you as well!

@jberns080 3 жыл бұрын

Great details man. Good video 👍👌

@Smeedia 3 жыл бұрын

Thank you🙏

@UlitheUnruly 3 жыл бұрын

does the protectant come in clear? I don't want to paint the wrap, I like the look

@omgtrey 4 жыл бұрын

Lookin good, bud! 👍👍

@vickyportlaoise 3 жыл бұрын

Hi I just wonder what if I don't do over wrapping jus super tight side to ? Is that paint hight temp black paint ? Thanks.

@kencondes5618 4 жыл бұрын

Glad you're better! enjoying your channel!

@Smeedia 4 жыл бұрын

Thank you and I appreciate the support my man!

@CryoGuy 2 жыл бұрын

Would hand twisted wire ties really be stronger than those stainless zipties? Ive never used the zipties so idk.

@jayswrx2417 3 жыл бұрын

Hey man so I believe the grimmspeed J pipe for the WRX is designed so that we are still able to use the OEM heat shield, would there be any disadvantages for wrapping using your technique combined with the heat shield?

@Smeedia 3 жыл бұрын

Should be any issues, better heat control overall. Just have to make sure the wrap is coated so water won't intrude and corrode the J pipe over time

@zanacku 4 жыл бұрын

This is great. I was just wanting to find out how to wrap headers. Getting uel headers soon for the sg6

@Smeedia 4 жыл бұрын

Same concept when you go to do the headers 😁😁😁

@donaldgeorge6656 4 жыл бұрын

Looking good. Glad to see your feeling better

@Smeedia 4 жыл бұрын

Thank you! Feeling great! 😁

@aacar4095 Жыл бұрын

Can you just use the metal zip ties and leave them on? Do you use the wire to make it look cleaner?

@lukasethan6429 2 жыл бұрын

I know this comment is a day late, lol, are but I really appreciate it this video. I already have aircraft fabrication skills and I follow LeMans racing so I do all of mine fabrication and install based on what I can find they do in that type of race card development. This is one of those that is very hard to find what they do and I know they use a very similar process so I really appreciate you showing this thank you very much

@streetcarmedia 4 жыл бұрын

Glad your all good bro this video will help when i do the header pipes on my bug love the content stay safe mate

@Smeedia 4 жыл бұрын

Glad the video helped! And same, dangerous out there now adays. Stay safe!

@daniyaalmaneveld3779 2 ай бұрын

Thanks for the vid, why would you use heat wrap over ceramic coating? Is it a personal preference or is the wrap better?

@sponiebr Жыл бұрын

So just out of curiosity would any dimethylsiloxane spray/soak/whatever-application work to prevent water intrusion?

@caelcaldwell4436 8 ай бұрын

115k subscribers later ;) congrats tanner on the success!

@WillKoz 3 жыл бұрын

Hi would aluminum wire be ok instead of stainless steel? Thanks

@Smeedia 3 жыл бұрын

The aluminum would become brittle quickly, would definitely suggest at least steel

@Jolley86 3 жыл бұрын

Came here to get some pointers on wrapping my down pipe for my 5.9 Cummins with a Evilfab s467 second gen swap. But very informative and just well put together video, you should be proud Sir. Earned a subscriber and I could see what I need for my mil ‘s 2014 outback.

@Smeedia 3 жыл бұрын

Appreciate the support and sounds like a fun rig, wanted one for a few years as a tow truck for some of the cars. Alot more expensive than I thought 😅

@Jolley86 3 жыл бұрын

@@Smeedia it’s a very pricey hobby. I have an ig @dude_is_jolley it’s got a few pics of the truck. Classy on the reply Sir.

@Smeedia 3 жыл бұрын

Try to get back to all of them, and I'll check it out 🙌

@WulfTakahashi 4 жыл бұрын

BIG moves on the STI coming soon. IM HYPE BRO LETS GET IT OUUUUUUUUU

@trnql_noir 2 жыл бұрын

Cool video! Would you say that coating the raw pipe before wrapping in heat wrap is a good idea? I've heard people saying this can be an extra layer of protection against water and corrosion. Also, would this be a good idea to do on the Killer B Holy Header with the SwainTech Multi-Layer Ceramic Coating option on the headers? Thanks!!

@Smeedia 2 жыл бұрын

Swaintech 100% My most recent one I cerakoted my exhaust and wrapped some of it so we shall find out

@TYLER503DURDEN 4 жыл бұрын

I have a question for you: I have the Grimmspeed catted downpipe on the way and was planning on wrapping it just like you did in this video. Yesterday I was at Surgeline setting up my tune appt and was talking about my plans with the guy at the front desk. He recommended that I do not wrap the downpipe. Being in the NW with the weather it can get wet and have other things down there stick to it and is just not necessary is what he said. Again he wasnt the person doing the tuning and some of the things he was telling me seemed questionable based on what Ive learned on your channel and other sources. So should I skip wrapping like he said or stay with my plan?

@Smeedia 4 жыл бұрын

When it comes to wrapping if it is not fully sealed water can get in and degrade the downpipe quick, we get a lot of water up here so it's very plausible for it to happen. It works very well for heat control but also has its come backs as well. You dont ned to wrap the downpipe but either option works

@Ur_clickbait_is_trash 2 жыл бұрын

Video starts at 4:00

@james7310 4 жыл бұрын

Glad you are feeling better! Check out safety wire twisting pliers. These work great for that wire you used. Keep up the good work

@Smeedia 4 жыл бұрын

I use to have some but no idea where they went lol manual twisting was a good back up for now 😅 and thank you, excited to keep em coming 😁

@BeyondTheLineProductions Жыл бұрын

Does the black fade? What brands do you recommend

@mrkthmn 3 жыл бұрын

Concerning the hi-temp silicone spray DEI says, "While not required for Titanium exhaust wrap, HT Silicone Coating will protect and prolong the life of the wrap. DEI recommends a minimum of three coats, *each heat cycled for curing *before* applying the next coat*. To cure, HT Silicone Coating needs to reach a temperature of 400°F for approximately 2 hours. Allow to cool before applying the next coat."

@CantTreadOnMe 11 ай бұрын

I'm worried about this curing process, have you had experience with it? How did you cure it? Wanna redo my Harley Python pipes.

@keithm.1598 4 жыл бұрын

As always great content and so timely since I’m actually going on the E train too lol. Doing mainly the same supporting mods as you on my 06 sti. I’m debating weather to wrap or ceramic coat my tomei eql header. I’m looking at swaintech or jet hot. Are you planning to wrap the header too?

@Smeedia 4 жыл бұрын

Yes I will he wrapping me header also, and I would suggest ceramic coat but I'm ballon on a budget now lmao

@keithm.1598 4 жыл бұрын

Smeedia I definitely understand. Only considering it as a peace of mind thing. Your build is 🔥🔥 looking forward to the next chapter 🤙🏽

@HondaAccordPerformance 2 жыл бұрын

I used titanium wrap on my trailblazer ss headers I don’t see the point in spraying the wrap afterwards mines holding up fine after 2 years going on 3 now

@TheeMisterspain 3 жыл бұрын

Awesome man. I bought a cheap exhaust for a Honda grom. Gonna wrap the pipe and coat it same way. Cheers

@oskarkarrera 3 жыл бұрын

Great Work.

@Smeedia 3 жыл бұрын

Thank you! 😁😁😁

@omgtrey 4 жыл бұрын

OUUUUUUUU!! Just got my new Tomei headers and uppipe wrapped. Getting put on this weekend. Looks so good, too bad nobody can see it lol

@Smeedia 4 жыл бұрын

Lol I know right! And jealous the tomei headers look so good!

@xXRadioRamboXx 4 ай бұрын

Any ideas on keeping those fibers from getting in your hand and fingers did the latex gloves really keep them out? Thanks

@Vaesive 4 ай бұрын

Titanium wrap doesn't have fiberglass that can get in your hands. Only fiberglass wrap will do that

@xXRadioRamboXx 4 ай бұрын

Understand that but still what's the secret 😂

@andrewpaige9152 4 жыл бұрын

Setting alarm clock for 5am for a Monday morning thanx lol great video Tanner and thanx for tip on wrapping glad the pigeon plague is over prooorrrr

@Smeedia 4 жыл бұрын

Lol no more piegon or plague 😅

@user-jd9fr3qc9g Жыл бұрын

Do you have to use high heat coating

@joshsmith-qi3ph 3 жыл бұрын

I just put a new exhaust on my bike that routes up the side to the tail. First ride melted my boot to my sexy new Ti midpipe. Does this stuff stay cool enough to be able to have my foot close to it?

@xtremewlr 3 жыл бұрын

Yes. I ran it on my track bike for just that reason. Works great. Would also suggest adding a heel guard so your boot doesn't wear out the wrap. Lots of cheap heel guards for exhaust out there.

@tubeee87 2 жыл бұрын

did you use the silicon coating?

@pripley 4 жыл бұрын

Glad you are feeling better, no pigeon! Not that pigeons are bad, or people who may have pigeons are bad, just *that particular* pigeon was not welcome!

@Smeedia 4 жыл бұрын

Lol thank you and that specific piegon we did not want 🤣

@CantTreadOnMe 11 ай бұрын

So I was told that sealant needs to be cured at 400 degrees F for hours. Is that true? Also does the heat gun help do that? Im trying to do my exhaust and headers on my Harley.

@jhonsoliss 4 жыл бұрын

Thank goodness no pigeon. Glad to see you safe and feeling better! Take care bro.

@Smeedia 4 жыл бұрын

Thank you, was pumped to hear that it was not! Stay safe out there!

@bradgreen987 4 жыл бұрын

Glad no pigeon! Yer fun tutorials teach us subie people right. Always a good watch. Thx

@Smeedia 4 жыл бұрын

Appreciate the support and test no piegon!

@animoshho Жыл бұрын

You put a wet wrap on then silicone sealed the water from the wet wrap under the header wrap? Am i missing something?

@joelthomas79 2 жыл бұрын

I wrapped my cat delete pipes on my Aventador S. Except I kept the stainless zip ties on. Is there a reason you couldn’t just leave them on?

@curtishobbs8239 4 жыл бұрын

Glad you're ferling better man!

@Smeedia 4 жыл бұрын

Thank you! Glad to be feeling better 🙌

@harryleelhyli2654 Жыл бұрын

can this reduce resonation? reduce drone?

@irishguyjg_2ndchancerecovery 4 ай бұрын

Aren't you supposed to spray the pipe before your install the wrap?

@isthatarexy1009 4 жыл бұрын

awesome video once again, I have a question with that wrap as I have a 2003 wrx with a varex full turbo-back exhaust would it be worthwhile to take off the downpipe to wrap it to try and eliminate some of the heat in the engine bay?

@Smeedia 4 жыл бұрын

It would help to reduce the hear soak, but if you do decide to do it make sure that you coat it so it won't erode over time 🔥

@isthatarexy1009 4 жыл бұрын

@@Smeedia yeah right interesting i think i should definitely do that thanks for that and its crazy how your already at 12k subs good work man

@Smeedia 4 жыл бұрын

Thank you and awesome to see things keep growing!

@tv4184 4 жыл бұрын

Great I didn't know how to do it but now I do. That DEI wrap is $$$ haha

@Smeedia 4 жыл бұрын

Not cheap at all, but thr spray definitely helps to improve the life span 😁😁

@joseperalta138 3 жыл бұрын

What size/gauge wire is that? Where did yku purchase . I've been to many places and not found it.

@Smeedia 3 жыл бұрын

Autozone, I don't recall the gauge size but it's the only size they stock 🙏

@redskoob 2 жыл бұрын

"Dingle-dangin" haha

@skylinegtr111 4 жыл бұрын

Hey glad you feel better....quick question how its beneficent and can you do all the exhaust??

@Smeedia 4 жыл бұрын

You can do all the exhaust and it keeps the heat from melting things or burning areas where you have no heat shields

@user-jq7hy8kz2i 7 ай бұрын

How long does it take to stop smelling burnt?

@saigoneze4465 4 жыл бұрын

i need your advice bro .So i'm getting the stage 2 build done on the 23 .Full Tbe,Verticooler,Tgv/Egr deletes,Cai and pro tune.My question relates to the video .Il be making around 200-205kw at the wheels .Before giving the parts to the shop should i wrap my j pipe also ? 2nd question .I have a Gfb respons Bov ..Should i keep it or do i order from the states the Boomba Bpv?

@Smeedia 4 жыл бұрын

The GFB is a good valve just check to make sure its not leaking, a smoke test should clear that up. If its leaking I would rebuild it or snag another one. As for thr J pipe if you can ceramic coat it, that would be ideal. If not some heat wrap should work for you 🔥

@saigoneze4465 4 жыл бұрын

Smeedia thanks heaps mate wow i didn't know ceramic coating would be enough that's awesome .Thats why i follow your channel man you always make time to reply to your subscribers .Thanks a lot

@joseph78e4n6 Ай бұрын

I use ideal clamps .. to hold the wrap also ... nice video

@saulespino3037 3 жыл бұрын

Good content brother, so I have a BRZ and I installed an aftermarket EL header and overpipe about 2 months ago but they are not wrapped. Should I be concerned with heat issues in the long term?

@Smeedia 3 жыл бұрын

I wouldent stress about it, if your N/A still you shoydlent have too many hest soaking issues

@saulespino3037 3 жыл бұрын

@@Smeedia Oh okay, thank you for taking the time to reply.

@livyjones4960 4 жыл бұрын

Do you have to upgrade the fuel system to run the maperformance stage 2 package with their tune... I thought you had to upgrade the fuel system when you do both the dp and intake

@Smeedia 4 жыл бұрын

You do have to upgrade the fuel system, but some companies offer a stage 2 with both somehow. I presume they keep the boost REALLY low when they do so. I wouldent advise running a DP+intake on the 15+ STI without fuel upgrades

@livyjones4960 4 жыл бұрын

@@Smeedia thanks for the reply... I thought the same thing.... keep up the great work...Your helping out all of us subie rookies

@livyjones4960 4 жыл бұрын

when doing the cobb stage 3 flex fuel kit should you consider an external wastegate?

@Smeedia 4 жыл бұрын

I just got my external wastegate in the mail yesterday 😉

@Smeedia 4 жыл бұрын

But it's not needed, hiwever; would be a good addition to help mitigate boost creep when shooting for more power

@subarubuildz1738 4 жыл бұрын

I haven’t wrap my down pipe,header, and upipe. I should get to that😂. Glad you are feeling better. I’m running a tial waste gate which is ok. My build is such a shit box because I go budget options but it’s my shit box and I enjoy it a lot.😂 Any Subaru can be made fun even on a tight budget.

@Smeedia 4 жыл бұрын

It's TRUE! And nothing wrong with a tight budget! 😁

@sirfrancisbacon4344 3 жыл бұрын

Hey Tanner thinking about doing a downpipe on my 19 wrx is it worth heat wrapping i notice the stock downpipe has a lot of heat shielding? If i get a catted downpipe can the heat wrap effect the cat?? Thanks you da man 🔥🔥🔥

@Smeedia 3 жыл бұрын

I would def look into coating, much better for hear protection but wrapping it is a good way to go!

@sirfrancisbacon4344 3 жыл бұрын

@@Smeedia thanks what kind of coatings are best?

@TREKLlN 3 ай бұрын

Would it be a waste to also paint and coat the bare metal? Want something I won't have to worry about rusting for 10 years

@jonathanvillalobos6932 3 жыл бұрын

I can follow the same procedure for a jpipe/down pipe right?

@Smeedia 3 жыл бұрын

Yes you can 🙏

@jonathanvillalobos6932 3 жыл бұрын

Thank you!

@jimanders6666 2 жыл бұрын

thanks for the video. the packaging that the exhaust wrap came in gave no instructions at all, so your video was much appreciated.

@bartmacneil7900 4 жыл бұрын

pigeon free and high on life :) awesome news brother!

@Smeedia 4 жыл бұрын

Very pigeon free and oh yes 😍

@meshallrazoog 3 жыл бұрын

Do I need to spry paint a stainless steel pipe? Or just wrap it? Becouse water is not an issue but the wrap is

@Smeedia 3 жыл бұрын

Just wrap would be fine if you don't live in a super wet area

@joker32127 4 жыл бұрын

Do you have a picture of the rest of the exhaust wrapped?

@Smeedia 4 жыл бұрын

This was the only piece that I wrapped because the heat shields were removed

@chrisharper2658 2 жыл бұрын

Why did you crop out the most important part? You didn't show the actual tying of the end of the wrap. Through the magic of editing the stainless tie-wrap just appeared. Done.

@WhiteDwarfVR4 2 жыл бұрын

"Sprayed an entire can of spray paint into my face".. That must hit dedication, I'll keep watching. DEI states that the titanium exhaust wrap is to be installed dry, as it is far more flexible than the previous fiberglass based wrap. Further, I dont know about subarus, but my exhaust gets awfully hot. Certainly hot enough to evaporate any moisture the wrap may absorb. I will say however, I do like the idea of using safety wire rather than the stainless lock ties.

@stephenkwan3728 4 жыл бұрын

Which header do you recommend other than killer bee?

@Smeedia 4 жыл бұрын

ETS 😁

@truexh 4 жыл бұрын

Another great video ooouuu. Just FYI, you do not need to wet titanium wrap prior to install because the material is much more flexible than glass fiber wraps. Anyways, glad you're feeling better and didn't catch the pigeon.

@Smeedia 4 жыл бұрын

Good to know, I've always wet it. But good to have some reassurance that the TI wrap does not need it 😁 and thank you, much better now 🔥

@joepacheco7979 Жыл бұрын

12 minutes I'll never get back.

@blackhorsegaming393 Жыл бұрын

So wait In gonna have to throw this in the oven for 1hr after each coat ?

@Sigrafix 2 жыл бұрын

Is that silicon spray really necessary? I mean, is water really going to get under the warap and corrode a pipe that's like 500 degrees?.. I'd think it would stay pretty dry just from the heat.. I don't know either way, I'm asking..

@booskie508 4 жыл бұрын

Lol face full of paint is always fun, happened to me on monday (user error🤣😂). As a electrician in Ri all firealarm must be painted red so its fun!🙃😂

@Smeedia 4 жыл бұрын

Lol scrubbed my face for like 30 min getting it all off 🤣🤣🤣 lol I'm sure your always covered in red paint 🤣

@adancisco 4 жыл бұрын

Im re-watching this video and can I ask because im still learning about parts and cars. Why did you need to wrap your overpipe? What other components off the exhaust are you going to wrap and im assuming its prep for the turbo?

@Smeedia 4 жыл бұрын

I wrapped this one because it wraps over the front subframe near some suspension bushings, the pipe came with the wrap so I saw it as an opportunity to show how to wrap. But for this piece when the tirbo parts come in ill prob remove it

@adancisco 4 жыл бұрын

@@Smeedia oh sweet. Didn't realize it came with the wrap. Thanks for that!

@RaiseTheBAWR 2 жыл бұрын

Orange dreamsicle is favorite flavor/energy drink!

@Smeedia 2 жыл бұрын

One of the best flavors 🔥

@marlonfb6_raiden662 3 жыл бұрын

Where did u buy tht heat silicone coating ?

@Smeedia 3 жыл бұрын

Autozone 😅

@ryanarch7366 4 жыл бұрын

No pigeon! Even went into the nest 💪💪 Ouuuuuu

@Smeedia 4 жыл бұрын

We clear and safe! 🔥😁

@paulthompson8649 2 жыл бұрын

they make lacing or safety wire plires that lock and spin when you pull on them. don't make the twist on the wire too tight though. it will break with vibration. not sure you need the wire in the middle sections though.

@STICKSHFT 3 жыл бұрын

I had an fp green on my 06 Sti. I loved it. I ended up selling the car but I miss it so much

@Smeedia 3 жыл бұрын

I know the feels 😪

@MazdaSpater 3 ай бұрын

Stand the roll of tape up in the bowl with a screwdriver through the centre instead of laying flat so it unrolls without twisting.

@chaoticend27 3 жыл бұрын

Brand new to exhaust wrapping here! Wait, I’m confused. I hear that you don’t have to wet the titanium one and you do the Fiberglass one? Does it depend on the person?

@Smeedia 3 жыл бұрын

You don't have to, it's just personal preference and I find it easier to wet it 🙏

@stevebarnes9694 2 жыл бұрын

helpful

@krisbayona 3 жыл бұрын

I just wrapped mine without soaking the wrap in water, using gloves and also used zip tie that came along with the wrap. Now, im suffering an itching sensation due to the micro fiber splinters that are sticking to my skin and some are also in my elbow 😢 How long do you think my body can get rid of all this micro splinters? Im also having some oder issues with the wrap and how long will this odor go away?

@Smeedia 3 жыл бұрын

Take a shower and really scrub, should get a lot of it out but typically a day or so after. And the wrap smell will go away after a few days 🔥

@krisbayona 3 жыл бұрын

Smeedia Thanks a lot! Just installed mine today and ill do a lot of scrubbing later then. Its also good to hear that the oder will eventually go away.

@travisfranklin530 3 ай бұрын

Beautiful color blue on that awesome car! What is the name or paint color code please

@chrisretro6952 4 жыл бұрын

I love the wrap man but one question when going into horsepower of your car (because you seem to be headed that way ) where and how do you get your OEM built block so basically who builds it and where to get it mantled

@Smeedia 4 жыл бұрын

I will be building my block, probably snag rods, pistons etc through RSD or TMG and build the block in the garage.

@chrisretro6952 4 жыл бұрын

Smeedia you will be doing a video correct?😂

@Smeedia 4 жыл бұрын

You already know it 🔥😁

@joeyfxcks 4 жыл бұрын

Which paint did you use?

@Smeedia 4 жыл бұрын

dei hi-temp silicone coating

@theblueninjazx10r 4 жыл бұрын

Add a Safety Wire Twist Tool to the Toolbox. Makes the job of twisting the wire a breeze and saves you a ton of time 😎👌🏼

@Smeedia 4 жыл бұрын

I lost my set 😫 I need to grab another set here soon, and they're si much better to use 😅

@theblueninjazx10r 4 жыл бұрын

Smeedia after moving Duty locations so much I’ve lost a lot of tools. So many that I’ve lost count 😝

@Smeedia 4 жыл бұрын

@@theblueninjazx10r lost a decent amount of mine when I ETS, the struggle is real 😅

@MrPiGGyOnCrAcK 4 жыл бұрын

Yasssss no Pigeon!!!!!!! Moar videos!! And more wooooooooooooo

@Smeedia 4 жыл бұрын

All the videos! I need to be able to get some.time off work to get more out 😫 but we will still stick with the schedule!!

@codykellner9985 2 жыл бұрын

It is crazy how far you have come I'm one year...that sti is way way different now...great video as always

@Smeedia 2 жыл бұрын

Always continuing to try and learn and improve. STIs definitely come a LONG way 🔥

@jryker28 3 жыл бұрын

Tanner in the past: got everything ordered for the STI! Me in the future: laughs in EJ33**

@Smeedia 3 жыл бұрын

😅😅😅😅