Thanks man! It’s good to take pride in our work and to strive to be better. A good tradesman knows we are never done learning.

Thanks! Glad you enjoyed them! Not all contractors are dishonest. You sound like a person of integrity. 👍🏼 After reviewing Tyvek install instructions it looks like the top of Z flashing can be taped or lapped. I’m not sure if the brand I used on this house has very specific instructions.

Glad you like it!

I believe you are referring to a piece of Z flashing. I’d say it is required. It can be made watertight a lot easier than j channel.

I usually use a 16 gauge x 1 1/4” staple and fasten to plywood. Depending on the type of underlayment and codes in your area you may have to fasten to studs and/or use different fasteners.

Thanks! That makes sense to me… I have been doing what feels right. I should brush up on the specifics though that way I can call them out confidently.

You’ll have to remind me what gap? Lol. It’s been a while since I recorded this one. 😊

I am actually struggling to find a decent siding stapler. The old Paslode that I use achieves a consistent staple depth regardless of whether or not you hit a stud... The new Paslode seems to be inconsistent, but maybe I just need more practice with it (Sometimes it may take a while to learn the tool). The older stapler is the model S200-s16 with the vinyl siding attachment tip # 219051 VINYL SIDING (which is no longer being manufactured), The new stapler is the model SCS200, but I'm having trouble locating the vinyl siding tip.... It might work to find a good quality 1/2" crown 16 gauge stapler and modify a tip to your liking. Sorry I can't be more help... I'll update this if I find more information. Update: So the Vinyl Siding tip part # is 219502 for Paslode SCS200. Still not finding them anywhere online, but a local hardware or lumber company may be able to find it for you.

@@sidingschool Thanks Was also wondering if the staple gun would work on slate siding. I do not want to take it off.

@@sidingschool you can try the dewalt cordless roofing nailer, you can get a siding tip on the front of it and it lines it up with the slots

Hi Wayne, I think you are talking about the slate siding that is more like cement and is just strong on an 1/8” thick? If so, I haven’t had luck stapling through it, staples bend over and crack the cement siding…. Whenever I’ve done those types of jobs I usually try 1/4”-3/8” fanfold insulation then new housewrap (making sure everything is sealed around) I usually just hand nail everything in these cases.

Hi 3n, I’ve used a roofing nailer briefly in the past and wasn’t much of a fan of it. The nails often came out at varying depths and a sometimes little crooked, which in my experience caused the nail to chip the top or bottom of the slot, pinch the siding a little to tight to the wall, and even put a little force towards the bottom of the piece of siding so the clips weren’t fully engaged anymore. This caused me to lose a little height on my courses. All that said…. it could be that I needed more practice on how to position the nail gun. A battery powered gun probably achieves a more consistent depth. I prefer staples because it loops around the nail hem, has a more consistent depth, and shoots in the same exact spot every time.

I’m not sure which situation you are referring to. Maybe above or below the window?… the window has a J-Channel built in. The purpose of undersill is to hold the loose edge of a piece of siding when it is cut horizontally. The undersill helps reduce the chances of the siding bubbling or “oil canning” and also can prevent it from becoming unclipped when used with a snap lock punch.

Yes, I saw you put it under the window. My windows don't have built in j channel. So I install the J and then the undersill to tuck inside the J channel for horizontal cuts? Thanks for your time!

No problem! Yeah, depending on where the coursing lands I would use undersill as well as J-Channel (I use undersill under windows that are wider than 3’ or so, some people use it on windows regardless of the window width). Sometimes if the rib of the siding is too close to the bottom of the window a single undersill doesn’t work and you have to either use a double undersill or build the undersill down by putting one underneath the other…. Pro tip: try to line up the holes in the undersill with the holes in the J-Channel, that way you don’t nail through the plastic on the J-Channel.

Awesome! Keep doing your thing man. Very helpful, I appreciate your attention to detail.