How to install Woodcraft Rear Sets on a 15-17 Yamaha R1 from SportbikeTrackGear.com

No video

How to install Woodcraft Rear Sets on a 15-17 Yamaha R1 from SportbikeTrackGear.com

Рет қаралды 23,172

Күн бұрын

How to install Woodcraft Rear Sets on a 15-17 Yamaha R1
Watch as Brian shows you how to install Woodcraft Rear Sets on the 2015 Yamaha YZF-R1. If you feel uncomfortable with this instillation please take your bike to a licensed motorcycle mechanic. Stay tuned for more instillation videos!
www.sportbiket...
Sportbike Track Gear is the #1 online eCommerce site for protective motorcycle apparel and performance parts. Buy popular brand name motorcycle helmets, riding gear, tires and parts at SportbikeTrackGear.com today! If you have any further questions post us a comment or send an email to orders@SportbikeTrackGear.com

Пікірлер: 46

@bobby3914 9 жыл бұрын

Nice clean job, looks great. woodcraft makes quality as I know I have their rear sets for my 05 zx6r.

@machmach5006 6 жыл бұрын

18:17 "no reason for this to come apart, at least no pleasant reason" LUL

@sportbiketrackgear 6 жыл бұрын

If you are taking this apart odds are you are taking all kinds of shit apart... - Van

@ChaosRandom63 7 жыл бұрын

Van, we'd love to see a how to video on the banjo bolt to retain rear brake light usage.

@king324100 9 жыл бұрын

Are you going to do the video on the pressure switch thing?..

@kimberlyj.397 6 жыл бұрын

Any videos for splicing and replacing banjo bolt with pressure switch to the master cylinder?

@ApeZX_Assas10n 3 жыл бұрын

In order to adjust can it be done while the rear sets are mounted or you have to remove a portion and adjust? I have an 08 CBR600RR and they feel too far back. I cannot position myself properly because the pegs are in the middle of my foot instead of the ball. It’s a hard transition and really uncomfortable after a while. Or maybe I should replace them with vortex?

@sportbiketrackgear 3 жыл бұрын

With some models you will need to remove the bracket from the frame to adjust the footpeg on a Woodcraft kit. Not a huge deal and only takes a minute. You can typically adjust the Vortex stuff without removing the bracket. - Van

@zacka3505 3 жыл бұрын

I’ve question about the level of the footrest please, are they must be in the same level?, is there any problem if one of them is higher/lower than the other? Actually I don’t know if it’s gonna effect the body position on the bike, especially the legs/knees against the tank. please advise

@sportbiketrackgear 3 жыл бұрын

I would not run the bike with them set at different levels. - Van

@Kirakat 9 жыл бұрын

I can tell that there is a set of race fairings on the bikes But my question is that, Can You use the Stock Headlights/Upper fairing With the Race fairings Lowers/Sides. The Longer lower fairings look alot better than stock but I'm going to be using it as a street based bike So I want to keep the stock head lights.

@jamesSmith-bn3ud 4 жыл бұрын

Your a big lad , I'm sure your handle the comments buddy lol

@sportbiketrackgear 4 жыл бұрын

Good to go over here. Thanks for watching! - Van

@jamesSmith-bn3ud 4 жыл бұрын

@@sportbiketrackgear always watching your videos van ,, from parts to bike pants buddy

@jamesSmith-bn3ud 4 жыл бұрын

@@sportbiketrackgear well van whole you were doing your thing with parts I was using imagination today with my 09 big bang r1 ,, not rear sets but removal of rear pill pegs ,, however not alot on KZfaq about the relocation of the brake res as its bolted to the actual peg arm... and I dont like this kits that are on market so ,,, I cut the peg drimmel and sanded etc and I was very pleased as the res is in same place but without the long arms of the peg legs sticking out at you ...very happy with how it turned out and it was free. Next I shall be doing my rear sets ,, gillies... that shall give me something to do instead of using the big zzr1400 all the time .

@Damitsall 6 жыл бұрын

Hey I got a question, by the way like your videos so far. Assuming you like the stock positioning of parts like these or your clutch/brake bars, what benefit do these offer?

@sportbiketrackgear 6 жыл бұрын

The footpegs have more grip than the stock pegs do which is nice as I feel most of the stock footpegs are a little slick. Additionally the footpegs are fixed and do not fold up which can help reduce damage in a crash or tip over. - Brian Van

@alexgoh1317 9 жыл бұрын

are you uploading the installation of race bodywork? i would like to see the fitment of the race fairing out of the box.

@sportbiketrackgear 9 жыл бұрын

Alex Goh We uploaded the first one with Hotbodies Fairings. I actually worked with them to dial in the fit and keep the stock ecu mounting which I feel is pretty important on this bike. - Van

@alexgoh1317 9 жыл бұрын

Sportbike Track Gear , thank u so much for uploading. Been waiting for this video. I seem like a pretty easy task if the fairing received are in the same exact condition as shown in the start of the video.i would not hesitate to get it, if the bodywork is already drilled and cut out for the ECU area. Could this be arranged? Will it fit with stock exhaust? Nees to buy the heat shield and foam pad separately?

@yard_bro 5 жыл бұрын

Brian, will I be able to mount my SC Project CRT to these without using that exhaust bracket? I have the low-position version.

@sportbiketrackgear 5 жыл бұрын

I am not familiar with the SC Project CRT exhaust so I will not be able to answer this question accurately for you. - Van

@pernellkatchp66 7 жыл бұрын

I am sure you can still buy handbook with all info you need on woodprix. Just google it.

@TheoreticalApex 9 жыл бұрын

I like the race body work! What is with the stock exhaust being back on the bike though?

@sportbiketrackgear 9 жыл бұрын

THEOreticalAPEX There should be another video on the bodywork but Brian was helping HotBodies with the fit and finish of their new kit for the 2015 R1. Thanks for watching! ~Aubrey

@TheoreticalApex 9 жыл бұрын

Sportbike Track Gear Oh so they wanted to test fitment with stock exhaust?

@sportbiketrackgear 9 жыл бұрын

THEOreticalAPEX Yes Sir wanted to make sure it would work with the stock exhaust. We also have some more exhaust videos coming up and needed to get the stock stuff back on. - Van

@TheoreticalApex 9 жыл бұрын

Sportbike Track Gear Ah gotcha. The bike looks great and all your videos are awesome! Hope to see some videos of this bike at the track!

@fighterclubz 9 жыл бұрын

Great product, unfortunately woodcraft don't make rear sets for my R1

@sportbiketrackgear 9 жыл бұрын

RebelRider Woodcraft has rearsets for the R1 from 1998 to 2015. - Van

@fighterclubz 9 жыл бұрын

I looked at their website and they say they no longer produce rear sets for my 2003 R1

@fighterclubz 9 жыл бұрын

My old bike had woodcraft full adjustable rear sets and only ones i can find are cheap Chinese ones which i don't trust

@sportbiketrackgear 9 жыл бұрын

RebelRider Woodcraft still makes a rearset for the 03 R1, you can find them here on the site: www.sportbiketrackgear.com/woodcraft-yamaha-yzf-r1-02-03-rearsets-basic-kit/

@fighterclubz 9 жыл бұрын

yea but those aren't adjustable i plan on taking it to the track and like adjustability

@rlee350 9 жыл бұрын

Sportbike Track Gear does the quick shifter work when you change to GP shift?

@MrMtaylor7210 9 жыл бұрын

Ron L It always does the transmission is still shifted the exact same way you're just switching the pivot point on the lever.

@rlee350 9 жыл бұрын

matt taylor yes, but by changing the pivot you now reversed the way it engages push/pull. The sensor on the shift rod would lead me to believe that like any after market sensor it's one or the other.

@MrMtaylor7210 9 жыл бұрын

The rod still goes the same direction regardless if it's gp shift or not. IE both pull the rod down to shift up.

@sportbiketrackgear 9 жыл бұрын

Ron L Yes sir it works for both GP and Standard. No need to make any changes. Woodcraft did a phenomenal job on these rear sets. - Van